- 21 Jun, 2013 31 commits
-
-
Lad, Prabhakar authored
This patch uses module_platform_driver() to simplify the code. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Lad, Prabhakar authored
Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by:
-
Lad, Prabhakar authored
For vpif capture driver each IRQ resource contains a single IRQ so drop the second loop. Signed-off-by:
-
Lad, Prabhakar authored
use devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
This patch uses module_platform_driver() to simplify the code. Signed-off-by:
-
Lad, Prabhakar authored
Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by:
-
Lad, Prabhakar authored
This patch removes unnecessary braces around defines. Signed-off-by:
-
Lad, Prabhakar authored
Use devm_ioremap_resource instead of reques_mem_region()/ioremap(). This ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
[media] media: davinci: vpif: remove unwanted header mach/hardware.h and sort the includes alphabetically This patch removes unwanted header include of mach/hardware.h and along side sorts the header inclusion alphabetically. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c: In function 'pvr2_v4l2_dev_init': drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1268:21: warning: variable 'usbdev' set but not used [-Wunused-but-set-variable] This warning is due to changeset a28fbd04, with removed the usage of usbdev inside pvr2_v4l2_dev_init(). Signed-off-by:
-
Hans Verkuil authored
'parent' was renamed to 'dev_parent'. Clarify how/when this should be used. Signed-off-by:
-
Hans Verkuil authored
The cx88 driver has one v4l2_device, but the video nodes are owned by two different PCI busses. So the dev_parent pointer should be set to the correct parent bus, otherwise sysfs won't show the correct device hierarchy. This broke starting in 3.6 after a driver change, so this patch resurrects the correct behavior. Signed-off-by:
-
Hans Verkuil authored
The last set of drivers still using the parent field of video_device instead of the v4l2_dev field have been converted, so v4l2_dev is now always set. A proper pointer to v4l2_dev is necessary these days otherwise the advanced debugging ioctls will not work when addressing sub-devices. It also ensures that the core can always go from a video_device struct to the top-level v4l2_device struct. There is still one single use case for the parent pointer: if there are multiple busses, each being the parent of one or more video nodes, and if they all share the same v4l2_device struct. In that case one still needs a parent pointer since the v4l2_device struct can only refer to a single parent device. The cx88 driver is one such case. Unfortunately, the cx88 failed to set the parent pointer since 3.6. The next patch will correct this. In order to support this use-case the parent pointer is only renamed to dev_parent, not removed altogether. It has been renamed to ensure that the compiler will catch any (possibly out-of-tree) drivers that were missed during the conversion. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This driver did not yet support struct v4l2_device, so add it. This make it possible to replace the deprecated parent field with the v4l2_dev field, allowing the eventual removal of the parent field. Signed-off-by:
-
Hans Verkuil authored
This driver did not yet support struct v4l2_device, so add it. This make it possible to replace the deprecated parent field with the v4l2_dev field, allowing the eventual removal of the parent field. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Hans Verkuil authored
This driver did not yet support struct v4l2_device, so add it. This make it possible to replace the deprecated parent field with the v4l2_dev field, allowing the eventual removal of the parent field. Signed-off-by:
-
Hans Verkuil authored
This driver did not yet support struct v4l2_device, so add it. This make it possible to replace the deprecated parent field with the v4l2_dev field, allowing the eventual removal of the parent field. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The parent field will eventually disappear to be replaced by v4l2_dev. soc_camera does provide a v4l2_device struct but did not point to it in struct video_device. This is now fixed. Now the video nodes can be found under the correct platform bus, and the advanced debug ioctls work correctly as well (the core implementation of those ioctls requires that v4l2_dev is set correctly). Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Hans Verkuil authored
It was possible to unregister an already unregistered v4l2_device struct. Add a check whether that already happened and just return if that was the case. Also refuse to register a v4l2_device if both the dev and name fields are empty. A warning was already produced in that case, but since the name field is now used to detect whether or not the v4l2_device was already unregistered this particular combination should be rejected. Signed-off-by:
-
Hans Verkuil authored
Ensure that the register is aligned to a dword, otherwise the read could read out-of-range data. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This has been replaced by the new and much better VIDIOC_DBG_G_CHIP_INFO. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This function is no longer needed since it is now the responsibility of the v4l2 core to check if the DBG_G/S_REGISTER and DBG_G_CHIP_INFO ioctls are called for the bridge driver or not. Signed-off-by:
-
Hans Verkuil authored
Remove g_chip_ident from cx88. Also remove the v4l2-chip-ident.h include. The board code used defines from v4l2-chip-ident.h to tell the driver which audio chip is used. Replace this with a cx88-specific enum. Signed-off-by:
-
- 20 Jun, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
* linus: (1465 commits) ARM: tegra30: clocks: Fix pciex clock registration lseek(fd, n, SEEK_END) does *not* go to eof - n Linux 3.10-rc6 smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). powerpc: Fix missing/delayed calls to irq_work powerpc: Fix emulation of illegal instructions on PowerNV platform powerpc: Fix stack overflow crash in resume_kernel when ftracing snd_pcm_link(): fix a leak... use can_lookup() instead of direct checks of ->i_op->lookup move exit_task_namespaces() outside of exit_notify() fput: task_work_add() can fail if the caller has passed exit_task_work() xfs: don't shutdown log recovery on validation errors xfs: ensure btree root split sets blkno correctly xfs: fix implicit padding in directory and attr CRC formats xfs: don't emit v5 superblock warnings on write mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. ...
-
- 19 Jun, 2013 8 commits
-
-
Soeren Moch authored
In dvb_ringbuffer lock-less synchronizationof reader and writer threads is done with separateread and write pointers. Sincedvb_ringbuffer_flush() modifies the read pointer, this function must not be called from the writer thread. This patch removes the dvb_ringbuffer_flush() calls in the dmxdev ringbuffer write functions, this fixes Oopses "Unable to handle kernel paging request" I could observe for the call chaindvb_demux_read ->dvb_dmxdev_buffer_read -> dvb_ringbuffer_read_user -> __copy_to_user (the reader side of the ringbuffer). The flush calls at the write side are not necessary anyway since ringbuffer_flush is also called in dvb_dmxdev_buffer_read() when an error condition is set in the ringbuffer. This patch should also be applied to stable kernels. Signed-off-by:
Soeren Moch <smoch@web.de> CC: <stable@vger.kernel.org> Reviewed-by:
-
Frank Schaefer authored
The GPIO register caching is the result of wrong assumptions and incomplete knowledge about the GPIO registers and their functionality. Today, we know that it is not needed. It is also limited to a single register and therefore incomplete (newer chips are using multiple registers). Instead of extending the caching, get rid of it, because it has no real benefits and just bloats/complicates the code. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
Frank Schaefer authored
- add definition for GPIO register 0x09 (reading/input) - extend the information the chip variants that support GPIO registers 0x08/0x09 - rename EM28XX_R08_GPIO to EM2820_R08_GPIO_CTRL Signed-off-by:
-
Frank Schaefer authored
The em25xx/em276x/7x/8x provides 4 GPIO register sets, each of them consisting of separate read and a write registers. The same registers are also used by the em2874/174/84. Signed-off-by:
-
Hans Verkuil authored
Remove the silly redefines of pr_err/info/debug. This improves readability and it also gets rid of a bunch of warnings when compiling this driver for older kernels using the compatibility media_build system. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Gianluca Gennari authored
The r820t_imr() calibration function of the Rafael Micro R820T tuner generates this error at every tune attempt: r820t 0-001a: No valid PLL values for 2252021 kHz! The function was inspired by the original Realtek driver for rtl2832 devices with the r820t tuner; anyway, in the original code the XTAL frequency of the tuner was expressed in KHz, while in the kernel driver it is expressed in Hz; so the calibration failed because of an out-of-range initial value. The final result of the computation is then passed to the r820t_set_mux() and r820t_set_pll() functions, but the conversion from KHz to Hz is already correctly implemented. Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
Gianluca Gennari authored
The memcpy in shadow_store() could exceed buffer limits when r > 0. Signed-off-by:
-
