- 29 Jan, 2008 40 commits
-
-
Aneesh Kumar K.V authored
ext4 uses the high bit of the extent length to encode whether the extent is intialized or not. The helper function ext4_ext_get_actual_len should be used to get the actual length of the extent. This addresses the kernel bug documented here: http://bugzilla.kernel.org/show_bug.cgi?id=9732 kernel BUG at fs/ext4/extents.c:1056! .... Call Trace: [<ffffffff88366073>] :ext4dev:ext4_ext_get_blocks+0x5ba/0x8c1 [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff812748f6>] _spin_unlock+0x17/0x20 [<ffffffff883400a6>] :jbd2:start_this_handle+0x4e0/0x4fe [<ffffffff88366564>] :ext4dev:ext4_fallocate+0x175/0x39a [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff81056480>] __lock_acquire+0x4e7/0xc4d [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff810a8de7>] sys_fallocate+0xe4/0x10d [<ffffffff8100c043>] tracesys+0xd5/0xda Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
Fix bug reported by Dmitry Monakhov caused by lost error code Testcase: blksize = 0x1000; fd = open(argv[1], O_RDWR|O_CREAT, 0700); unsigned long long sz = 0x10000000UL; /* allocating big blocks chunk */ syscall(__NR_fallocate, fd, 0, 0UL, sz) /* grab all other available filesystem space */ tfd = open("tmp", O_RDWR|O_CREAT|O_DIRECT, 0700); while( write(tfd, buf, 4096) > 0); /* loop untill ENOSPC */ fsync(fd); /* just in case */ while (pos < sz) { /* each seek+ write operation result in splits uninitialized extent in three extents. Splitting may result in new extent allocation which probably will fail because of ENOSPC*/ lseek(fd, blksize*2 -1, SEEK_CUR); if ((ret = write(fd, 'a', 1)) != 1) exit(1); pos += blksize * 2; } Signed-off-by:Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
sb_set_blocksize validates whether the specfied block size can be used by the file system. Make sure we fail mounting the file system if the blocksize specfied cannot be used. Signed-off-by:
-
Miklos Szeredi authored
Add stripe= option to /proc/mounts for ext4 filesystems. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Aneesh Kumar K.V authored
Enable the multiblock allocator by default. Fix ext4_show_options() so if it is not enabled, the nomballoc option included in /proc/mounts. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Alex Tomas authored
Signed-off-by:
Alex Tomas <alex@clusterfs.com> Signed-off-by:
Andreas Dilger <adilger@clusterfs.com> Signed-off-by:
-
Alex Tomas authored
Add the functions ext4_ext_search_left() and ext4_ext_search_right(), which are used by mballoc during ext4_ext_get_blocks to decided whether to merge extent information. Signed-off-by:
Johann Lombardi <johann@clusterfs.com> Signed-off-by:
-
Aneesh Kumar K.V authored
This function is used by the ext4 multi block allocator patches. Also add generic_find_next_le_bit Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Eric Sandeen authored
Builds with EXT4FS_DEBUG defined (to enable ext4_debug()) fail without these changes. Clean up some format warnings too. Signed-off-by:
-
Aneesh Kumar K.V authored
We need to look at the default value and make sure the mount options are not set via default value before showing them via ext4_show_options Signed-off-by: -
Aneesh Kumar K.V authored
The below patch add ioctl for migrating ext3 indirect block mapped inode to ext4 extent mapped inode. Signed-off-by: -
Jean Noel Cordenner authored
This patch adds 64-bit inode version support to ext4. The lower 32 bits are stored in the osd1.linux1.l_i_version field while the high 32 bits are stored in the i_version_hi field newly created in the ext4_inode. This field is incremented in case the ext4_inode is large enough. A i_version mount option has been added to enable the feature. Signed-off-by:
Kalpak Shah <kalpak@clusterfs.com> Signed-off-by:
Jean Noel Cordenner <jean-noel.cordenner@bull.net>
-
Jean Noel Cordenner authored
The i_version field of the inode is changed to be a 64-bit counter that is set on every inode creation and that is incremented every time the inode data is modified (similarly to the "ctime" time-stamp). The aim is to fulfill a NFSv4 requirement for rfc3530. This first part concerns the vfs, it converts the 32-bit i_version in the generic inode to a 64-bit, a flag is added in the super block in order to check if the feature is enabled and the i_version is incremented in the vfs. Signed-off-by:
-
Girish Shilamkar authored
The journal checksum feature adds two new flags i.e JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM. JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the checksum for the blocks described by the descriptor blocks. Due to checksums, writing of the commit record no longer needs to be synchronous. Now commit record can be sent to disk without waiting for descriptor blocks to be written to disk. This behavior is controlled using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be able to recover the journal with _ASYNC_COMMIT hence it is made incompat. The commit header has been extended to hold the checksum along with the type of the checksum. For recovery in pass scan checksums are verified to ensure the sanity and completeness(in case of _ASYNC_COMMIT) of every transaction. Signed-off-by:
Girish Shilamkar <girish@clusterfs.com> Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
-
Johann Lombardi authored
The patch below updates the jbd stats patch to 2.6.20/jbd2. The initial patch was posted by Alex Tomas in December 2005 (http://marc.info/?l=linux-ext4&m=113538565128617&w=2). It provides statistics via procfs such as transaction lifetime and size. Sometimes, investigating performance problems, i find useful to have stats from jbd about transaction's lifetime, size, etc. here is a patch for review and inclusion probably. for example, stats after creation of 3M files in htree directory: [root@bob ~]# cat /proc/fs/jbd/sda/history R/C tid wait run lock flush log hndls block inlog ctime write drop close R 261 8260 2720 0 0 750 9892 8170 8187 C 259 750 0 4885 1 R 262 20 2200 10 0 770 9836 8170 8187 R 263 30 2200 10 0 3070 9812 8170 8187 R 264 0 5000 10 0 1340 0 0 0 C 261 8240 3212 4957 0 R 265 8260 1470 0 0 4640 9854 8170 8187 R 266 0 5000 10 0 1460 0 0 0 C 262 8210 2989 4868 0 R 267 8230 1490 10 0 4440 9875 8171 8188 R 268 0 5000 10 0 1260 0 0 0 C 263 7710 2937 4908 0 R 269 7730 1470 10 0 3330 9841 8170 8187 R 270 0 5000 10 0 830 0 0 0 C 265 8140 3234 4898 0 C 267 720 0 4849 1 R 271 8630 2740 20 0 740 9819 8170 8187 C 269 800 0 4214 1 R 272 40 2170 10 0 830 9716 8170 8187 R 273 40 2280 0 0 3530 9799 8170 8187 R 274 0 5000 10 0 990 0 0 0 where, R - line for transaction's life from T_RUNNING to T_FINISHED C - line for transaction's checkpointing tid - transaction's id wait - for how long we were waiting for new transaction to start (the longest period journal_start() took in this transaction) run - real transaction's lifetime (from T_RUNNING to T_LOCKED lock - how long we were waiting for all handles to close (time the transaction was in T_LOCKED) flush - how long it took to flush all data (data=ordered) log - how long it took to write the transaction to the log hndls - how many handles got to the transaction block - how many blocks got to the transaction inlog - how many blocks are written to the log (block + descriptors) ctime - how long it took to checkpoint the transaction write - how many blocks have been written during checkpointing drop - how many blocks have been dropped during checkpointing close - how many running transactions have been closed to checkpoint this one all times are in msec. [root@bob ~]# cat /proc/fs/jbd/sda/info 280 transaction, each upto 8192 blocks average: 1633ms waiting for transaction 3616ms running transaction 5ms transaction was being locked 1ms flushing data (in ordered mode) 1799ms logging transaction 11781 handles per transaction 5629 blocks per transaction 5641 logged blocks per transaction Signed-off-by:
Johann Lombardi <johann.lombardi@bull.net> Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Aneesh Kumar K.V authored
When we are overwriting a file and not actually allocating new file system blocks we need to take only the read lock on i_data_sem. Signed-off-by: -
Aneesh Kumar K.V authored
We are currently taking the truncate_mutex for every read. This would have performance impact on large CPU configuration. Convert the lock to read write semaphore and take read lock when we are trying to read the file. Signed-off-by: -
Aneesh Kumar K.V authored
When doing a migrate from ext3 to ext4 inode we need to make sure the test for inode type and walking inode data happens inside lock. To make this happen move truncate_mutex early before checking the i_flags. This actually should enable us to remove the verify_chain(). Signed-off-by: -
Mariusz Kozlowski authored
The unused code found in ext3_find_entry() is also present (and still unused) in the ext4_find_entry() code. This patch removes it. Signed-off-by:
-
Aneesh Kumar K.V authored
ext4_ext_get_blocks returns negative values on error. We should check for <= 0 Signed-off-by: -
Jan Kara authored
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Chris Snook authored
Signed-off-by:
Chris Snook <csnook@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Aneesh Kumar K.V authored
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: -
Aneesh Kumar K.V authored
Add buffer head related helper function bh_uptodate_or_lock and bh_submit_read which can be used by file system Signed-off-by: -
Aneesh Kumar K.V authored
ext4 file system was by default ignoring errors and continuing. This is not a good default as continuing on error could lead to file system corruption. Change the default to mark the file system readonly. Debian and ubuntu already does this as the default in their fstab. Signed-off-by:
-
Eric Sandeen authored
When mounting an ext4 filesystem with corrupted s_first_data_block, things can go very wrong and oops. Because blocks_count in ext4_fill_super is a u64, and we must use do_div, the calculation of db_count is done differently than on ext4. If first_data_block is corrupted such that it is larger than ext4_blocks_count, for example, then the intermediate blocks_count value may go negative, but sign-extend to a very large value: blocks_count = (ext4_blocks_count(es) - le32_to_cpu(es->s_first_data_block) + EXT4_BLOCKS_PER_GROUP(sb) - 1); This is then assigned to s_groups_count which is an unsigned long: sbi->s_groups_count = blocks_count; This may result in a value of 0xFFFFFFFF which is then used to compute db_count: db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); and in this case db_count will wind up as 0 because the addition overflows 32 bits. This in turn causes the kmalloc for group_desc to be of 0 size: sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), GFP_KERNEL); and eventually in ext4_check_descriptors, dereferencing sbi->s_group_desc[desc_block] will result in a NULL pointer dereference. The simplest test seems to be to sanity check s_first_data_block, EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure their combination won't result in a bad intermediate value for blocks_count. We could just check for db_count == 0, but catching it at the root cause seems like it provides more info. Signed-off-by: -
Adrian Bunk authored
Based on a report by Robert P. J. Day. Signed-off-by:Adrian Bunk <bunk@kernel.org>
-
Aneesh Kumar K.V authored
This fix some instances where we were continuing after calling ext4_error. ext4_error call panic only if errors=panic mount option is set. So we need to make sure we return correctly after ext4_error call Reported by: Adrian Bunk <bunk@kernel.org> Signed-off-by: -
Coly Li authored
This patch extends bg_itable_unused of ext4 group descriptor from 16bit into 32bit. In order to add bg_itable_unused_hi into struct ext4_group_desc, some extra fields which are already introduced into e2fsprogs are also added in for consistency. Signed-off-by:
Coly Li <coyli@suse.de> Cc: Andreas Dilger <adilger@clusterfs.com> Signed-off-by:
-
Aneesh Kumar K.V authored
The max file size for ext3 file system is now calculated with hardcoded 4K block size. The patch fixes it to be calculated with the right block size. Signed-off-by: -
Aneesh Kumar K.V authored
The max file size for ext2 file system is now calculated with hardcoded 4K block size. The patch fixes it to be calculated with the right block size. Signed-off-by: -
Eric Sandeen authored
Calculate & store the max offset for bitmapped files, and catch too-large seeks, truncates, and writes in ext4, shortening or rejecting as appropriate. Signed-off-by: -
Eric Sandeen authored
Export iov_shorten() from kernel so that ext4 can truncate too-large writes to bitmapped files. Signed-off-by: -
Eric Sandeen authored
use 2 different maxbytes functions for bitmapped & extent-based files. Signed-off-by: -
Aneesh Kumar K.V authored
This patch converts ext4_inode i_blocks to represent total blocks occupied by the inode in file system block size. Earlier the variable used to represent this in 512 byte block size. This actually limited the total size of the file. The feature is enabled transparently when we write an inode whose i_blocks cannot be represnted as 512 byte units in a 48 bit variable. inode flag EXT4_HUGE_FILE_FL Signed-off-by: -
Aneesh Kumar K.V authored
Use the __le16 l_i_reserved1 field of the linux2 struct of ext4_inode to represet the higher 16 bits for i_blocks. With this change max_file size becomes (2**48 -1 )* 512 bytes. We add a RO_COMPAT feature to the super block to indicate that inode have i_blocks represented as a split 48 bits. Super block with this feature set cannot be mounted read write on a kernel with CONFIG_LSF disabled. Super block flag EXT4_FEATURE_RO_COMPAT_HUGE_FILE Signed-off-by: -
Aneesh Kumar K.V authored
Rename ext4_inode.i_dir_acl to i_size_high drop ext4_inode_info.i_dir_acl as it is not used Rename ext4_inode.i_size to ext4_inode.i_size_lo Add helper function for accessing the ext4_inode combined i_size. Signed-off-by: -
Aneesh Kumar K.V authored
Rename i_file_acl to i_file_acl_lo. This helps in finding bugs where we use i_file_acl instead of the combined i_file_acl_lo and i_file_acl_high Signed-off-by: -
Aneesh Kumar K.V authored
Fix sparse warnings related to static functions and local variables. Signed-off-by: -
Aneesh Kumar K.V authored
Introduce ext4_update_*_feature and use them instead of opencoding. Signed-off-by:
-
