- 03 Oct, 2006 40 commits
-
-
Alan Cox authored
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway) - Clean up printk obfuscation - Clean up lispitus in the if(())()) stuff - Minor tidying No functionality changes, may have a crack at hardware scrolling based on my X driver once the cleanups are in. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
This patch adds proper prototypes to header files for three console init functions used on drivers/char/vt.c Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Adrian Bunk authored
This patch makes three needlessly global functions static. Signed-off-by:
-
Raphael Assenat authored
This patch fixes a bug where we obtain a smaller resolution than requested. (eg: in 640x480, only 639x479 usable pixels). This was due to 1 being substracted from the xres and yres vars two times: first in mbxfb.c and then in the macros from reg_bits.h. This patch removes the minus ones from the mbxfb.c file. Tested and works. Signed-off-by:
Raphael Assenat <raph@8d.com> Signed-off-by:
-
Raphael Assenat authored
This is a workaround for what I think is a bug in the 2700G chip. The PLL output frequency is adustable using 3 values (M, N and P. See code for formula). The N value range is documented to be 1 to 7 but when it is set to 1, the output frequency is lower than it should be (divided by 2), giving unexpected results such as no sync on a CRT display. This patch prevents N=1 when searching for the best value for the requested pixclock. Signed-off-by:
-
Adrian Bunk authored
- make the following needlessly global function static: - mach64_ct.c: aty_st_pll_ct() - proper prototypes for the following functions: - atyfb_base.c: atyfb_copyarea() - atyfb_base.c: atyfb_fillrect() - atyfb_base.c: atyfb_imageblit() Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_enable_device(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_enable_device(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_register_driver() Signed-off-by:
-
Antonino A. Daplas authored
Check return value of pci_register_driver(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Remove the cursor timer (cursor flashing) on the following conditions: - if vc is in KD_GRAPHICS mode, ie, when X owns the console - if vc is blanked This misbehavior was exposed by Dave Jones. Signed-off-by:
-
Dave Jones authored
Every time the console cursor blinks, we do a kmalloc/kfree pair. This patch turns that into a single allocation. This allocation was the most frequent kmalloc I saw on my test box. [adaplas] Per Alan's suggestion, move global variables to fbcon's private structure. This would also avoid resource leaks when fbcon is unloaded. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
-
Dennis Munsie authored
Uses the generic ddc read functionality in fbmon.c instead of the previous functionality. Signed-off-by:
Dennis Munsie <dmunsie@cecropia.com> Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading [khali@linux-fr.org: fix oops in i2c handling] Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Jurriaan <thunder7@xs4all.nl> Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Dennis Munsie authored
Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by:
-
Mike Frysinger authored
The Kconfig help text doesnt mention that in order to load the vfb module, you have to pass in the parameter vfb_enable=1 Document required module options in Kconfig for loading the vfb module. Signed-off-by:
-
Guido Guenther authored
use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to Signed-off-by:
Guido Guenther <agx@sigxcpu.org> Signed-off-by:
-
Ph. Marek authored
Correct sample boot line and add a remark on mode setting. Signed-off-by:
-
Rodolfo Giometti authored
- add cursor enable/disable, very useful if you wish a full screen boot logo. Cursor can be disabled from kernel command line: video=au1100fb:nocursor,panel:Toppoly_TD035STED4 or from sysfs interface: echo 1 > /sys/module/au1100fb/parameters/nocursor - fix up some wrong indentation issues. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
David Brownell authored
Git rid of the runtime warning about pcmcia not supporting exclusive IRQs, so "the driver needs updating". Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
-
Alan Cox authored
Signed-off-by:
-
Patrick Jefferson authored
Allow ide/pci/generic to claim chipsets as a a module or when built-in. It requires using "all_generic_ide" as a boot option. Signed-off-by:
Patrick Jefferson <henj@hp.com> Acked-by:
-
Alan Cox authored
Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated reset while the IDE layer was already resetting the channel caused a crash, and provided a rough fix. This is a slightly cleaner version of the fix which tracks the reset state and blocks further reset requests while a reset is in progress. Note this is not a security issue - random end users can't access the ioctl in question anyway. Signed-off-by:
-
Alexey Dobriyan authored
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Marcin Juszkiewicz authored
Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by:
Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
-
