The v4l2_dev has no corresponding device to it. We will
point it to the gadget's dev.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-4-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While sending bigger images is possible with USB_SPEED_SUPER it is
better to use more isochronous requests in flight. This patch makes the
number uvc_num_requests dynamic by changing it depending on the gadget
speed.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-3-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case of dwc3 it is possible that the sysdev is the parent of the
controller. To ensure the right dev is set to the gadget's dev parent we
will hand over sysdev instead of dev, which will always point to the
controller.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20210628155311.16762-2-m.grzeschik@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Support suspend/resume for dual-role mode including the single
port and multi-ports supported by host controller, when the host
supports mult-ports, only port0 (u2/u3) is used to support dual
role mode.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-14-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Support suspend/resume for device mode if the device is not
connected with a host, otherwise reject to suspend.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-13-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add helper to power on/down device ports and ip, it will be
used when support device suspend/resume
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-12-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a dedicated wakeup irq for runtime suspend/resume, and interrupts
names are provided if using wakeup irq, this patch only support host
mode.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Extract two helpers for host suspend and resume, will make it easy
to support dual-role mode suspend/resume later.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-10-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others
for the same SoC.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-9-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Support default mode config when use usb-role-switch
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-8-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helper usb_get_role_switch_default_mode() to
get property of "role-switch-default-mode"
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-7-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add helper to get "role-switch-default-mode", and convert it
to the corresponding enum usb_dr_mode
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-6-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add an dedicated interrupt which is usually EINT to support runtime PM,
meanwhile add "interrupt-names" property, for backward compatibility,
it's optional and used when wakeup interrupt exists
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-5-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support optional property of role-switch-default-mode,
used to set default mode while usb role is USB_ROLE_NONE when use
usb-role-switch to switch mode.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-4-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others for
the same SoC, another case is that the different package may support
different number of ports.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-3-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to no platforms use a multi-funtion pin to detect VBUS
status until now when support dual role mode, prefer not to
support it anymore;
Another reason is that the controller doesn't support idle status,
the dual role port works as device or as host, using an IDDIG pin
is good enough, this will help to save another multi-function pin;
And fix a typo of 'neede';
Last modify example using VBUS to turn on/off device, for device
only mode, the driver doesn't get extcon.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-2-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the fixes in here, and this resolves a merge issue with
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e6 ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:

    kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
    static inline void __always_inline idle_init(unsigned int cpu)
                       ^

which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.

We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that.  And while the
compiler may not care, we put the inline specifier before the types.

So it should be just

    static __always_inline void idle_init(unsigned int cpu)

instead.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Michael Ellerman:

 - Fix guest to host memory corruption in H_RTAS due to missing nargs
   check.

 - Fix guest triggerable host crashes due to bad handling of nested
   guest TM state.

 - Fix possible crashes due to incorrect reference counting in
   kvm_arch_vcpu_ioctl().

 - Two commits fixing some regressions in KVM transactional memory
   handling introduced by the recent rework of the KVM code.

Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.

* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
  KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
  KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
  KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
  KVM: PPC: Book3S HV P9: Fix guest TM support

Pull timer fixes from Thomas Gleixner:
 "A small set of timer related fixes:

   - Plug a race between rearm and process tick in the posix CPU timers
     code

   - Make the optimization to avoid recalculation of the next timer
     interrupt work correctly when there are no timers pending"

* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Fix get_next_timer_interrupt() with no timers pending
  posix-cpu-timers: Fix rearm racing against process tick

Pull x86 jump label fix from Thomas Gleixner:
 "A single fix for jump labels to prevent the compiler from agressive
  un-inlining which results in a section mismatch"

* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining

Pull EFI fixes from Thomas Gleixner:
 "A set of EFI fixes:

   - Prevent memblock and I/O reserved resources to get out of sync when
     EFI memreserve is in use.

   - Don't claim a non-existing table is invalid

   - Don't warn when firmware memory is already reserved correctly"

* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/mokvar: Reserve the table only if it is in boot services data
  efi/libstub: Fix the efi_load_initrd function description
  firmware/efi: Tell memblock about EFI iomem reservations
  efi/tpm: Differentiate missing and invalid final event log table.

Pull core fix from Thomas Gleixner:
 "A single update for the boot code to prevent aggressive un-inlining
  which causes a section mismatch"

* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining

Pull dma-mapping fix from Christoph Hellwig:

 - handle vmalloc addresses in dma_common_{mmap,get_sgtable} (Roman
   Skakun)

* tag 'dma-mapping-5.14-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}

Pull cifs fixes from Steve French:
 "Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
  fixes, and two trivial coverity cleanups"

* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix fallocate when trying to allocate a hole.
  CIFS: Clarify SMB1 code for POSIX delete file
  CIFS: Clarify SMB1 code for POSIX Create
  cifs: support share failover when remounting
  cifs: only write 64kb at a time when fallocating a small region of a file

Pull RISC-V fixes from Palmer Dabbelt:

 - properly set the memory size, which fixes 32-bit systems

 - allow initrd to load anywhere in memory, rather that restricting it
   to the first 256MiB

 - fix the 'mem=' parameter on 64-bit systems to properly account for
   the maximum supported memory now that the kernel is outside the
   linear map

 - avoid installing mappings into the last 4KiB of memory, which
   conflicts with error values

 - avoid the stack from being freed while it is being walked

 - a handful of fixes to the new copy to/from user routines

* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: __asm_copy_to-from_user: Fix: Typos in comments
  riscv: __asm_copy_to-from_user: Remove unnecessary size check
  riscv: __asm_copy_to-from_user: Fix: fail on RV32
  riscv: __asm_copy_to-from_user: Fix: overrun copy
  riscv: stacktrace: pin the task's stack in get_wchan
  riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
  riscv: Make sure the linear mapping does not use the kernel mapping
  riscv: Fix memory_limit for 64-bit kernel
  RISC-V: load initrd wherever it fits into memory
  riscv: Fix 32-bit RISC-V boot failure

Commit 71f64283 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL.  That fails miserably, because that helper
inline function is not set up to handle that case.

Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.

Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers, all of which can lead to user visible
  problems in certain situations"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: Fix NULL dereference on XCOPY completion
  scsi: mpt3sas: Transition IOC to Ready state during shutdown
  scsi: target: Fix protect handling in WRITE SAME(32)
  scsi: iscsi: Fix iface sysfs attr detection

Pull io_uring fixes from Jens Axboe:

 - Fix a memory leak due to a race condition in io_init_wq_offload
   (Yang)

 - Poll error handling fixes (Pavel)

 - Fix early fdput() regression (me)

 - Don't reissue iopoll requests off release path (me)

 - Add a safety check for io-wq queue off wrong path (me)

* tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
  io_uring: explicitly catch any illegal async queue attempt
  io_uring: never attempt iopoll reissue from release path
  io_uring: fix early fdput() of file
  io_uring: fix memleak in io_init_wq_offload()
  io_uring: remove double poll entry on arm failure
  io_uring: explicitly count entries for poll reqs

Pull block fixes from Jens Axboe:

 - NVMe pull request (Christoph):
    - tracing fix (Keith Busch)
    - fix multipath head refcounting (Hannes Reinecke)
    - Write Zeroes vs PI fix (me)
    - drop a bogus WARN_ON (Zhihao Cheng)

 - Increase max blk-cgroup policy size, now that mq-deadline
   uses it too (Oleksandr)

* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
  nvme: set the PRACT bit when using Write Zeroes with T10 PI
  nvme: fix nvme_setup_command metadata trace event
  nvme: fix refcounting imbalance when all paths are down
  nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
  block: increase BLKCG_MAX_POLS

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes for the I2C subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Poll for MCF
  misc: eeprom: at24: Always append device id even if label property is set.

Merge misc mm fixes from Andrew Morton:
 "15 patches.

  VM subsystems affected by this patch series: userfaultfd, kfence,
  highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
  hugetlbfs"

* akpm:
  hugetlbfs: fix mount mode command line processing
  mm: fix the deadlock in finish_fault()
  mm: mmap_lock: fix disabling preemption directly
  mm/secretmem: wire up ->set_page_dirty
  writeback, cgroup: do not reparent dax inodes
  writeback, cgroup: remove wb from offline list before releasing refcnt
  memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
  mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
  mm: use kmap_local_page in memzero_page
  mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
  kfence: skip all GFP_ZONEMASK allocations
  kfence: move the size check to the beginning of __kfence_alloc()
  kfence: defer kfence_test_init to ensure that kunit debugfs is created
  selftest: use mmap instead of posix_memalign to allocate memory
  userfaultfd: do not untag user pointers

Fixing typos and grammar mistakes and using more intuitive label
name.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa2 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Clean up:

The size of 0 will be evaluated in the next step. Not
required here.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa2 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Had a bug when converting bytes to bits when the cpu was rv32.

The a3 contains the number of bytes and multiple of 8
would be the bits. The LGREG is holding 2 for RV32 and 3 for
RV32, so to achieve multiple of 8 it must always be constant 3.
The 2 was mistakenly used for rv32.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa2 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

There were two causes for the overrun memory access.

The threshold size was too small.
The aligning dst require one SZREG and unrolling word copy requires
8*SZREG, total have to be at least 9*SZREG.

Inside the unrolling copy, the subtracting -(8*SZREG-1) would make
iteration happening one extra loop. Proper value is -(8*SZREG).
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa2 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

In commit 32021982 ("hugetlbfs: Convert to fs_context") processing
of the mount mode string was changed from match_octal() to fsparam_u32.

This changed existing behavior as match_octal does not require octal
values to have a '0' prefix, but fsparam_u32 does.

Use fsparam_u32oct which provides the same behavior as match_octal.

Link: https://lkml.kernel.org/r/20210721183326.102716-1-mike.kravetz@oracle.com
Fixes: 32021982 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dennis Camera <bugs+kernel.org@dtnr.ch>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 63f3655f ("mm, memcg: fix reclaim deadlock with writeback")
fix the following ABBA deadlock by pre-allocating the pte page table
without holding the page lock.

	                                lock_page(A)
                                        SetPageWriteback(A)
                                        unlock_page(A)
  lock_page(B)
                                        lock_page(B)
  pte_alloc_one
    shrink_page_list
      wait_on_page_writeback(A)
                                        SetPageWriteback(B)
                                        unlock_page(B)

                                        # flush A, B to clear the writeback

Commit f9ce0be7 ("mm: Cleanup faultaround and finish_fault()
codepaths") reworked the relevant code but ignored this race.  This will
cause the deadlock above to appear again, so fix it.

Link: https://lkml.kernel.org/r/20210721074849.57004-1-zhengqi.arch@bytedance.com
Fixes: f9ce0be7 ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 832b5072 ("mm: mmap_lock: use local locks instead of
disabling preemption") fixed a bug by using local locks.

But commit d01079f3 ("mm/mmap_lock: remove dead code for
!CONFIG_TRACING configurations") changed those lines back to the
original version.

I guess it was introduced by fixing conflicts.

Link: https://lkml.kernel.org/r/20210720074228.76342-1-songmuchun@bytedance.com
Fixes: d01079f3 ("mm/mmap_lock: remove dead code for !CONFIG_TRACING configurations")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>