Sound uses the standard 5V supply, so rename the fixed regulator as
such. Also add properties documenting it is always on, also during boot.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-3-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

It is named T1.8V in the schematics. Also add properties documenting it
is always on, also during boot.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-2-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Without them, no power, so cards do not get recognized.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135840.28988-1-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Complete the descriptions of the serial console and the external serial
clock by adding pin control.

Based on patches for Gray Hawk in the BSP by Hai Pham and Nghia Nguyen.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b1eb2d3364d5ead7f7bcf7a737c5914971db64d3.1706266286.git.geert+renesas@glider.be

Add a device node for the Pin Function Controller on the Renesas R-Car
V4M (R8A779H0) SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0ab32290014b64ddbee5c9ec2808c8294d0b6192.1706266286.git.geert+renesas@glider.be

Enable the watchdog timer on the Gray Hawk Single board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cf6effafd9e0472a457eed9d84a834abc3e1c833.1706790320.git.geert+renesas@glider.be

Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car V4M (R8A779H0) SoC.
Signed-off-by: Minh Le <minh.le.aj@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/43bb03f3baa87b4be8ce953b1955df6b89387e4c.1706790320.git.geert+renesas@glider.be

Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5c70ad8c2ea14333616c5add31a4a958f4a47081.1705325654.git.geert+renesas@glider.be

Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/389a18ee2cea96726462c28463cf212330f74ee3.1705325654.git.geert+renesas@glider.be

Add CSI and CRU nodes r9a07g043 (RZ/G2UL) SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240126133116.121981-4-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add initial support for the Renesas Gray Hawk Single board, which is
based on the R-Car V4M (R8A779H0) SoC:
  - Memory,
  - Crystal oscillators,
  - Serial console.

Based on the White Hawk Single DTS, and on a patch for the Gray Hawk
board stack in the BSP by Hai Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be

Add initial support for the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/4107bc3d7c31932da29e671ddf4b1564ba38a84c.1706194617.git.geert+renesas@glider.be

Renesas R-Car V4M DT Binding Definitions

Clock and Power Domain definitions for the Renesas R-Car V4M (R8A779H0)
SoC, shared by driver and DT source files.

Enable the watchdog interface (accessible by Cortex-A of RZ/G3S SoC) on
RZ/G3S SMARC SoM.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-11-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add the DT node for the watchdog IP accessible by Cortex-A of RZ/G3S
SoC (R9108G045).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-10-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes: a4c31c56 ("arm64: dts: renesas: r8a779g0: Add SCIF nodes")
Fixes: 39d9dfc6 ("arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/72f20c1bf32187bd30a963cafe27252907d661f9.1705589612.git.geert+renesas@glider.be

Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
V4M (R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be

Document support for the Clock Pulse Generator (CPG) and Module Standby
Software Reset (MSSR) module on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/eb3cd02b62f3ca834df079a3f1e551d9414fe42a.1706194617.git.geert+renesas@glider.be

Add power domain indices for the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/c5cbef71178cada761e9da7bcbb6f21334f93ef8.1706194617.git.geert+renesas@glider.beSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Document support for the System Controller (SYSC) in the R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6315cbd0b6e9b92a7914d98f397a2c663ad521c6.1706194617.git.geert+renesas@glider.beSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The White Hawk Single board is a single-board integration of the Renesas
White Hawk CPU and Breakout board stack, based on the R-Car V4H ES2.0
(R8A779G2) SoC.

For now, the only visible differences compared to the board stack are:
  - The SoC is an updated version of R-Car V4H (R8A779G0),
  - The serial console uses an FT2232H instead of a CP2102 USB-UART
    bridge, with CTS/RTS wired.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/2b8d37949c17cca170c1d9e97f10a100b20c5cd9.1706192990.git.geert+renesas@glider.be

Add support for the Renesas R-Car V4H ES2.0 (R8A779G2) SoC, which is an
updated version of the R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/4f773dbb66af5da51d1e171424ec8f97ee933b36.1706192990.git.geert+renesas@glider.be

Factor out the parts on the White Hawk BreakOut board that are also
present on the White Hawk Single board, so they can be reused when
introducing support for the latter.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/8c05b4d283b5d765fbc6f64cee9a247cded29409.1706192990.git.geert+renesas@glider.be

Factor out the parts on the White Hawk CPU board that are also present
on the White Hawk Single board, so they can be reused when introducing
support for the latter.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/50676e7e9ac1c50ab450c030481f60ece4c3947e.1706192990.git.geert+renesas@glider.be

The White Hawk CPU and BreakOut board DTS is specific to R-Car V4H.
Document it in the top-level comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/de81db7ca38c8f4737092bdac6891e9db4bb9bd6.1706192990.git.geert+renesas@glider.be

The White Hawk CSI/DSI and RAVB/Ethernet(1000Base-T1) sub boards are not
specific to R-Car V4H.

Hence rename their DTS file names to drop the "r8a779g0-" prefix, and
remove any references to R-Car V4H.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f89613d0df04cfa6196f8797fe655cf7cec812de.1706192990.git.geert+renesas@glider.be

Alphabetical by node name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f375293d6e21659ee30a86e2b46e4998a75ea3b5.1706192990.git.geert+renesas@glider.be

The White Hawk CPU board can be used standalone, without connecting it
to the White Hawk BreakOut board.

Add a DTS file for supporting this use case.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/95ac53e7f2bc42402eb411ad7f64a66864a3de01.1706192990.git.geert+renesas@glider.be

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-3-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Schematics say that all these 3.3v sources are driven by "D3.3V".
We have a regulator for it already in ulcb.dtsi.  Use it instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-2-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Numerical by unit address, alphabetical by node name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f00ef274a73c8fd60f940a1649423a8927b9ae8a.1705324708.git.geert+renesas@glider.be

According to Table 8.1, "Summary of Module Power, Reset condition and
Clock assignment" of the R-Mobile APE6 Hardware Manual Rev. 0.7, the
parent clock of the thermal sensor clock is the Common Peripheral (CP)
clock, which runs at 13 MHz (main clock / 2).

As the R-Car Thermal driver does not use the clock rate, this change has
no functional impact.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/aac49d67d7a38230875543d49e84fcca587fb9e1.1705315614.git.geert+renesas@glider.be

Add the Common Peripheral (CP) clock, which is driven by the main
clock / 2 during normal system operation, but may be driven by EXTALR
during early system boot, when SYSCLK_EN is still low.  As the latter is
irrelevant to Linux, just model it as a fixed clock driven from
main_div2_clk.

Switch all users of main_div2_clk that are documented to be clocked by
the CP clock to cp_clk, to better reflect the actual clock topology.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/f9826b0755207a1e16871c17daca109fb11f3868.1705315614.git.geert+renesas@glider.be

External clocks should be defined as zero-Hz clocks in the SoC .dtsi,
and overridden in the board .dts when present.

Correct the clock rate of extal1 from 25 to 26 MHz, to match the crystal
oscillator present on the APE6-EVM board.

Fixes: a76809a3 ("ARM: shmobile: r8a73a4: Common clock framework DT description")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1692bc8cd465d62168cbf110522ad62a7af3f606.1705315614.git.geert+renesas@glider.be

RZ SMARC Carrier II board has 3 user buttons called USER_SW1, USER_SW2,
USER_SW3. Add a DT node in device tree to propertly instantiate the
gpio-keys driver for these buttons.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231227130810.2744550-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>