- 18 Oct, 2012 2 commits
-
-
Xiao Guangrong authored
VM exits during Event Delivery is really unexpected if it is not caused by Exceptions/EPT-VIOLATION/TASK_SWITCH, we'd better to report an internal and freeze the guest, the VMM has the chance to check the guest Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
- 17 Oct, 2012 4 commits
-
-
Xiao Guangrong authored
The only difference between FNAME(update_pte) and FNAME(pte_prefetch) is that the former is allowed to prefetch gfn from dirty logged slot, so introduce a common function to prefetch spte Signed-off-by:
-
Xiao Guangrong authored
The function does not depend on guest mmu mode, move it out from paging_tmpl.h Signed-off-by:
-
Xiao Guangrong authored
Let it return emulate state instead of spte like __direct_map Signed-off-by:
-
Xiao Guangrong authored
Remove mmu_is_invalid and use is_invalid_pfn instead Signed-off-by:
-
- 10 Oct, 2012 5 commits
-
-
http://github.com/agraf/linux-2.6Marcelo Tosatti authored
* 'for-upstream' of http://github.com/agraf/linux-2.6: (56 commits) arch/powerpc/kvm/e500_tlb.c: fix error return code KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas KVM: PPC: Book3S: Get/set guest FP regs using the GET/SET_ONE_REG interface KVM: PPC: Book3S: Get/set guest SPRs using the GET/SET_ONE_REG interface KVM: PPC: set IN_GUEST_MODE before checking requests KVM: PPC: e500: MMU API: fix leak of shared_tlb_pages KVM: PPC: e500: fix allocation size error on g2h_tlb1_map KVM: PPC: Book3S HV: Fix calculation of guest phys address for MMIO emulation KVM: PPC: Book3S HV: Remove bogus update of physical thread IDs KVM: PPC: Book3S HV: Fix updates of vcpu->cpu KVM: Move some PPC ioctl definitions to the correct place KVM: PPC: Book3S HV: Handle memory slot deletion and modification correctly KVM: PPC: Move kvm->arch.slot_phys into memslot.arch KVM: PPC: Book3S HV: Take the SRCU read lock before looking up memslots KVM: PPC: bookehv: Allow duplicate calls of DO_KVM macro KVM: PPC: BookE: Support FPU on non-hv systems KVM: PPC: 440: Implement mfdcrx KVM: PPC: 440: Implement mtdcrx Document IACx/DACx registers access using ONE_REG API KVM: PPC: E500: Remove E500_TLB_DIRTY flag ...
-
Christian Borntraeger authored
Newer kernels (linux-next with the transparent huge page patches) use rrbm if the feature is announced via feature bit 66. RRBM will cause intercepts, so KVM does not handle it right now, causing an illegal instruction in the guest. The easy solution is to disable the feature bit for the guest. This fixes bugs like: Kernel BUG at 0000000000124c2a [verbose debug info unavailable] illegal operation: 0001 [#1] SMP Modules linked in: virtio_balloon virtio_net ipv6 autofs4 CPU: 0 Not tainted 3.5.4 #1 Process fmempig (pid: 659, task: 000000007b712fd0, ksp: 000000007bed3670) Krnl PSW : 0704d00180000000 0000000000124c2a (pmdp_clear_flush_young+0x5e/0x80) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 00000000003cc000 0000000000000004 0000000000000000 0000000079800000 0000000000040000 0000000000000000 000000007bed3918 000000007cf40000 0000000000000001 000003fff7f00000 000003d281a94000 000000007bed383c 000000007bed3918 00000000005ecbf8 00000000002314a6 000000007bed36e0 Krnl Code:>0000000000124c2a: b9810025 ogr %r2,%r5 0000000000124c2e: 41343000 la %r3,0(%r4,%r3) 0000000000124c32: a716fffa brct %r1,124c26 0000000000124c36: b9010022 lngr %r2,%r2 0000000000124c3a: e3d0f0800004 lg %r13,128(%r15) 0000000000124c40: eb22003f000c srlg %r2,%r2,63 [ 2150.713198] Call Trace: [ 2150.713223] ([<00000000002312c4>] page_referenced_one+0x6c/0x27c) [ 2150.713749] [<0000000000233812>] page_referenced+0x32a/0x410 [...] CC: stable@vger.kernel.org CC: Alex Graf <agraf@suse.de> Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Cornelia Huck authored
Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Jason J. Herne authored
EXTERNAL_CALL and EMERGENCY type interrupts need to preserve their interrupt code parameter when being injected from user space. Signed-off-by:
Jason J. Herne <jjherne@us.ibm.com> Reviewed-by:
-
Shuah Khan authored
Change existing kernel error message to include return value from iommu_attach_device() when it fails. This will help debug device assignment failures more effectively. Signed-off-by:
Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
- 08 Oct, 2012 2 commits
-
-
Jan Kiszka authored
No users outside of kvm/x86.c. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Jan Kiszka authored
There are no external callers of this function as there is no concept of resetting a vcpu from generic code. Signed-off-by:
-
- 05 Oct, 2012 27 commits
-
-
Julia Lawall authored
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A new label is also added to avoid freeing things that are known to not yet be allocated. A simplified version of the semantic match that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
The PAPR paravirtualization interface lets guests register three different types of per-vCPU buffer areas in its memory for communication with the hypervisor. These are called virtual processor areas (VPAs). Currently the hypercalls to register and unregister VPAs are handled by KVM in the kernel, and userspace has no way to know about or save and restore these registrations across a migration. This adds "register" codes for these three areas that userspace can use with the KVM_GET/SET_ONE_REG ioctls to see what addresses have been registered, and to register or unregister them. This will be needed for guest hibernation and migration, and is also needed so that userspace can unregister them on reset (otherwise we corrupt guest memory after reboot by writing to the VPAs registered by the previous kernel). The "register" for the VPA is a 64-bit value containing the address, since the length of the VPA is fixed. The "registers" for the SLB shadow buffer and dispatch trace log (DTL) are 128 bits long, consisting of the guest physical address in the high (first) 64 bits and the length in the low 64 bits. This also fixes a bug where we were calling init_vpa unconditionally, leading to an oops when unregistering the VPA. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
This enables userspace to get and set all the guest floating-point state using the KVM_[GS]ET_ONE_REG ioctls. The floating-point state includes all of the traditional floating-point registers and the FPSCR (floating point status/control register), all the VMX/Altivec vector registers and the VSCR (vector status/control register), and on POWER7, the vector-scalar registers (note that each FP register is the high-order half of the corresponding VSR). Most of these are implemented in common Book 3S code, except for VSX on POWER7. Because HV and PR differ in how they store the FP and VSX registers on POWER7, the code for these cases is not common. On POWER7, the FP registers are the upper halves of the VSX registers vsr0 - vsr31. PR KVM stores vsr0 - vsr31 in two halves, with the upper halves in the arch.fpr[] array and the lower halves in the arch.vsr[] array, whereas HV KVM on POWER7 stores the whole VSX register in arch.vsr[]. Signed-off-by:
-
Paul Mackerras authored
This enables userspace to get and set various SPRs (special-purpose registers) using the KVM_[GS]ET_ONE_REG ioctls. With this, userspace can get and set all the SPRs that are part of the guest state, either through the KVM_[GS]ET_REGS ioctls, the KVM_[GS]ET_SREGS ioctls, or the KVM_[GS]ET_ONE_REG ioctls. The SPRs that are added here are: - DABR: Data address breakpoint register - DSCR: Data stream control register - PURR: Processor utilization of resources register - SPURR: Scaled PURR - DAR: Data address register - DSISR: Data storage interrupt status register - AMR: Authority mask register - UAMOR: User authority mask override register - MMCR0, MMCR1, MMCRA: Performance monitor unit control registers - PMC1..PMC8: Performance monitor unit counter registers In order to reduce code duplication between PR and HV KVM code, this moves the kvm_vcpu_ioctl_[gs]et_one_reg functions into book3s.c and centralizes the copying between user and kernel space there. The registers that are handled differently between PR and HV, and those that exist only in one flavor, are handled in kvmppc_[gs]et_one_reg() functions that are specific to each flavor. Signed-off-by:
-
Scott Wood authored
Avoid a race as described in the code comment. Also remove a related smp_wmb() from booke's kvmppc_prepare_to_enter(). I can't see any reason for it, and the book3s_pr version doesn't have it. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
This was found by kmemleak. Signed-off-by:
-
Scott Wood authored
We were only allocating half the bytes we need, which was made more obvious by a recent fix to the memset in clear_tlb1_bitmap(). Signed-off-by:
-
Paul Mackerras authored
In the case where the host kernel is using a 64kB base page size and the guest uses a 4k HPTE (hashed page table entry) to map an emulated MMIO device, we were calculating the guest physical address wrongly. We were calculating a gfn as the guest physical address shifted right 16 bits (PAGE_SHIFT) but then only adding back in 12 bits from the effective address, since the HPTE had a 4k page size. Thus the gpa reported to userspace was missing 4 bits. Instead, we now compute the guest physical address from the HPTE without reference to the host page size, and then compute the gfn by shifting the gpa right PAGE_SHIFT bits. Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Paul Mackerras authored
When making a vcpu non-runnable we incorrectly changed the thread IDs of all other threads on the core, just remove that code. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Paul Mackerras authored
This removes the powerpc "generic" updates of vcpu->cpu in load and put, and moves them to the various backends. The reason is that "HV" KVM does its own sauce with that field and the generic updates might corrupt it. The field contains the CPU# of the -first- HW CPU of the core always for all the VCPU threads of a core (the one that's online from a host Linux perspective). However, the preempt notifiers are going to be called on the threads VCPUs when they are running (due to them sleeping on our private waitqueue) causing unload to be called, potentially clobbering the value. Signed-off-by:
-
Paul Mackerras authored
This moves the definitions of KVM_CREATE_SPAPR_TCE and KVM_ALLOCATE_RMA in include/linux/kvm.h from the section listing the vcpu ioctls to the section listing VM ioctls, as these are both implemented and documented as VM ioctls. Fortunately there is no actual collision of ioctl numbers at this point. Moving these to the correct section will reduce the probability of a future collision. This does not change the user/kernel ABI at all. Signed-off-by:
-
Paul Mackerras authored
This adds an implementation of kvm_arch_flush_shadow_memslot for Book3S HV, and arranges for kvmppc_core_commit_memory_region to flush the dirty log when modifying an existing slot. With this, we can handle deletion and modification of memory slots. kvm_arch_flush_shadow_memslot calls kvmppc_core_flush_memslot, which on Book3S HV now traverses the reverse map chains to remove any HPT (hashed page table) entries referring to pages in the memslot. This gets called by generic code whenever deleting a memslot or changing the guest physical address for a memslot. We flush the dirty log in kvmppc_core_commit_memory_region for consistency with what x86 does. We only need to flush when an existing memslot is being modified, because for a new memslot the rmap array (which stores the dirty bits) is all zero, meaning that every page is considered clean already, and when deleting a memslot we obviously don't care about the dirty bits any more. Signed-off-by:
-
Paul Mackerras authored
Now that we have an architecture-specific field in the kvm_memory_slot structure, we can use it to store the array of page physical addresses that we need for Book3S HV KVM on PPC970 processors. This reduces the size of struct kvm_arch for Book3S HV, and also reduces the size of struct kvm_arch_memory_slot for other PPC KVM variants since the fields in it are now only compiled in for Book3S HV. This necessitates making the kvm_arch_create_memslot and kvm_arch_free_memslot operations specific to each PPC KVM variant. That in turn means that we now don't allocate the rmap arrays on Book3S PR and Book E. Since we now unpin pages and free the slot_phys array in kvmppc_core_free_memslot, we no longer need to do it in kvmppc_core_destroy_vm, since the generic code takes care to free all the memslots when destroying a VM. We now need the new memslot to be passed in to kvmppc_core_prepare_memory_region, since we need to initialize its arch.slot_phys member on Book3S HV. Signed-off-by:
-
Paul Mackerras authored
The generic KVM code uses SRCU (sleeping RCU) to protect accesses to the memslots data structures against updates due to userspace adding, modifying or removing memory slots. We need to do that too, both to avoid accessing stale copies of the memslots and to avoid lockdep warnings. This therefore adds srcu_read_lock/unlock pairs around code that accesses and uses memslots. Since the real-mode handlers for H_ENTER, H_REMOVE and H_BULK_REMOVE need to access the memslots, and we don't want to call the SRCU code in real mode (since we have no assurance that it would only access the linear mapping), we hold the SRCU read lock for the VM while in the guest. This does mean that adding or removing memory slots while some vcpus are executing in the guest will block for up to two jiffies. This tradeoff is acceptable since adding/removing memory slots only happens rarely, while H_ENTER/H_REMOVE/H_BULK_REMOVE are performance-critical hot paths. Signed-off-by:
-
Mihai Caraman authored
The current form of DO_KVM macro restricts its use to one call per input parameter set. This is caused by kvmppc_resume_\intno\()_\srr1 symbol definition. Duplicate calls of DO_KVM are required by distinct implementations of exeption handlers which are delegated at runtime. Use a rare label number to avoid conflicts with the calling contexts. Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by:
-
Alexander Graf authored
When running on HV aware hosts, we can not trap when the guest sets the FP bit, so we just let it do so when it wants to, because it has full access to MSR. For non-HV aware hosts with an FPU (like 440), we need to also adjust the shadow MSR though. Otherwise the guest gets an FP unavailable trap even when it really enabled the FP bit in MSR. Signed-off-by: -
Alexander Graf authored
We need mfdcrx to execute properly on 460 cores. Signed-off-by: -
Alexander Graf authored
We need mtdcrx to execute properly on 460 cores. Signed-off-by: -
Bharat Bhushan authored
Patch to access the debug registers (IACx/DACx) using ONE_REG api was sent earlier. But that missed the respective documentation. Also corrected the index number referencing in section 4.69 Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by:
-
Alexander Graf authored
Since we always mark pages as dirty immediately when mapping them read/write now, there's no need for the dirty flag in our cache. Signed-off-by: -
Alexander Graf authored
Exit traces are a lot easier to read when you don't have to remember cryptic numbers for guest exit reasons. Symbolify them in our trace output. Signed-off-by: -
Alexander Graf authored
Add support for the MCSR SPR. This only implements the SPR storage bits, not actual machine checks. Signed-off-by: -
Alexander Graf authored
We need to make sure that vcpu->arch.pvr is initialized to a sane value, so let's just take the host PVR. Signed-off-by: -
Bharat Bhushan authored
IAC/DAC are defined as 32 bit while they are 64 bit wide. So ONE_REG interface is added to set/get them. Signed-off-by:
-
Bharat Bhushan authored
This patch adds the watchdog emulation in KVM. The watchdog emulation is enabled by KVM_ENABLE_CAP(KVM_CAP_PPC_BOOKE_WATCHDOG) ioctl. The kernel timer are used for watchdog emulation and emulates h/w watchdog state machine. On watchdog timer expiry, it exit to QEMU if TCR.WRC is non ZERO. QEMU can reset/shutdown etc depending upon how it is configured. Signed-off-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
-
Alexander Graf authored
Requests may want to tell us that we need to go back into host state, so add a return value for the checks. Signed-off-by: -
Alexander Graf authored
Our prepare_to_enter helper wants to be able to return in more circumstances to the host than only when an interrupt is pending. Broaden the interface a bit and move even more generic code to the generic helper. Signed-off-by:
-
