- 20 Mar, 2013 1 commit
-
-
Ben Hutchings authored
This reverts commit 066f2898 which was 6a040ce7 upstream. This was not needed and is not suitable for 3.2.y. Reported-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
- 06 Mar, 2013 39 commits
-
-
Ben Hutchings authored
-
Theodore Ts'o authored
commit 89a4e48f upstream. Commit 968dee77: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110 [<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0 [<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0 [<ffffffff81207e05>] ext4_truncate+0xf5/0x100 [<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490 [<ffffffff811a1312>] evict+0xa2/0x1a0 [<ffffffff811a1513>] iput+0x103/0x1f0 [<ffffffff81196d84>] do_unlinkat+0x154/0x1c0 [<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40 [<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50 [<ffffffff816135e9>] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee77 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by:
Maciej Żenczykowski <maze@google.com> Reported-by:
Marti Raudsepp <marti@juffo.org> Tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Ashish Sangwan authored
commit 968dee77 upstream. Whether to continue removing extents or not is decided by the return value of function ext4_ext_more_to_rm() which checks 2 conditions: a) if there are no more indexes to process. b) if the number of entries are decreased in the header of "depth -1". In case of hole punch, if the last block to be removed is not part of the last extent index than this index will not be deleted, hence the number of valid entries in the extent header of "depth - 1" will remain as it is and ext4_ext_more_to_rm will return 0 although the required blocks are not yet removed. This patch fixes the above mentioned problem as instead of removing the extents from the end of file, it starts removing the blocks from the particular extent from which removing blocks is actually required and continue backward until done. Signed-off-by:
Ashish Sangwan <ashish.sangwan2@gmail.com> Signed-off-by:
Namjae Jeon <linkinjeon@gmail.com> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lukas Czerner authored
commit 5f95d21f upstream. This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by:
-
Justin Lecher authored
commit 98c350cd upstream. Support the caching of large files. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=31182Signed-off-by:
Justin Lecher <jlec@gentoo.org> Signed-off-by:
Suresh Jayaraman <sjayaraman@suse.com> Tested-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - dentry_open() takes dentry and vfsmount pointers, not a path pointer] Signed-off-by:
-
Kees Cook authored
commit d7402698 upstream. To avoid an explosion of request_module calls on a chain of abusive scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon as maximum recursion depth is hit, the error will fail all the way back up the chain, aborting immediately. This also has the side-effect of stopping the user's shell from attempting to reexecute the top-level file as a shell script. As seen in the dash source: if (cmd != path_bshell && errno == ENOEXEC) { *argv-- = cmd; *argv = cmd = path_bshell; goto repeat; } The above logic was designed for running scripts automatically that lacked the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC, things continue to behave as the shell expects. Additionally, when tracking recursion, the binfmt handlers should not be involved. The recursion being tracked is the depth of calls through search_binary_handler(), so that function should be exclusively responsible for tracking the depth. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: halfdog <me@halfdog.net> Cc: P J P <ppandit@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Oleg Nesterov authored
commit 1cc684ab upstream. As Tetsuo Handa pointed out, request_module() can stress the system while the oom-killed caller sleeps in TASK_UNINTERRUPTIBLE. The task T uses "almost all" memory, then it does something which triggers request_module(). Say, it can simply call sys_socket(). This in turn needs more memory and leads to OOM. oom-killer correctly chooses T and kills it, but this can't help because it sleeps in TASK_UNINTERRUPTIBLE and after that oom-killer becomes "disabled" by the TIF_MEMDIE task T. Make __request_module() killable. The only necessary change is that call_modprobe() should kmalloc argv and module_name, they can't live in the stack if we use UMH_KILLABLE. This memory is freed via call_usermodehelper_freeinfo()->cleanup. Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Oleg Nesterov authored
commit 3e63a93b upstream. No functional changes. Move the call_usermodehelper code from __request_module() into the new simple helper, call_modprobe(). Signed-off-by:
-
Oleg Nesterov authored
commit 5b9bd473 upstream. Minor cleanup. ____call_usermodehelper() can simply return, no need to call do_exit() explicitely. Signed-off-by:
-
Oleg Nesterov authored
commit d0bd587a upstream. Implement UMH_KILLABLE, should be used along with UMH_WAIT_EXEC/PROC. The caller must ensure that subprocess_info->path/etc can not go away until call_usermodehelper_freeinfo(). call_usermodehelper_exec(UMH_KILLABLE) does wait_for_completion_killable. If it fails, it uses xchg(&sub_info->complete, NULL) to serialize with umh_complete() which does the same xhcg() to access sub_info->complete. If call_usermodehelper_exec wins, it can safely return. umh_complete() should get NULL and call call_usermodehelper_freeinfo(). Otherwise we know that umh_complete() was already called, in this case call_usermodehelper_exec() falls back to wait_for_completion() which should succeed "very soon". Note: UMH_NO_WAIT == -1 but it obviously should not be used with UMH_KILLABLE. We delay the neccessary cleanup to simplify the back porting. Signed-off-by:
-
Oleg Nesterov authored
commit b3449922 upstream. Preparation. Add the new trivial helper, umh_complete(). Currently it simply does complete(sub_info->complete). Signed-off-by:
-
Ben Hutchings authored
commit cb7da022 upstream. Since commit 8871e99f ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by:
ryan <draziw+deb@gmail.com> References: http://bugs.debian.org/692436Signed-off-by:
Corentin Chary <corentin.chary@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com>
-
Samuel Thibault authored
commit cfd75701 upstream. Speech synthesis beginners need a low speech rate, and trained people want a high speech rate. A medium speech rate is thus actually not a good default for neither. Since trained people will typically know how to change the rate, better default for a low speech rate, which beginners can grasp and learn how to increase it afterwards This was agreed with users on the speakup mailing list. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Laurent Pinchart authored
commit e387ef5c upstream. Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Laurent Pinchart authored
commit 80da2e0d upstream. When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by:
-
Ben Hutchings authored
When backporting commit ebebd49a ('8250/16?50: Add support for Broadcom TruManage redirected serial port') I took the next available port type number for PORT_BRCM_TRUMANAGE (22). However, the 8250 port type numbers are exposed to userland through the TIOC{G,S}SERIAL ioctls and so must remain stable. Redefine PORT_BRCM_TRUMANAGE as 25, matching mainline as of commit 85f02440. This leaves port types 22-24 within the valid range for 8250 but not implemented there. Change serial8250_verify_port() to specifically reject these and change serial8250_type() to return "unknown" for them (though I'm not sure why it would ever see them). Signed-off-by:
-
Michael S. Tsirkin authored
commit bd97120f upstream. If a single descriptor crosses a region, the second chunk length should be decremented by size translated so far, instead it includes the full descriptor length. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
commit 30ebc5e4 upstream. We recently introduced a new return -ENODEV in this function but we need to unlock before returning. [mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch] Acked-by:
Herton R. Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Douglas Bagnall <douglas@paradise.net.nz> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Douglas Bagnall authored
commit 720bb643 upstream. For some reason, when the lirc daemon learns that a usb remote control has been unplugged, it wants to read the sysfs attributes of the disappearing device. This is useful for uncovering transient inconsistencies, but less so for keeping the system running when such inconsistencies exist. Under some circumstances (like every time I unplug my dvb stick from my laptop), lirc catches an rc_dev whose raw event handler has been removed (presumably by ir_raw_event_unregister), and proceeds to interrogate the raw protocols supported by the NULL pointer. This patch avoids the NULL dereference, and ignores the issue of how this state of affairs came about in the first place. Version 2 incorporates changes recommended by Mauro Carvalho Chehab (-ENODEV instead of -EINVAL, and a signed-off-by). Signed-off-by:
-
Alexey Klimov authored
commit 0322bd39 upstream. Don't let Masterkit MA901 USB radio be handled by usb hid drivers. This device will be handled by radio-ma901.c driver. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
James Ralston authored
commit 3aee8bc5 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Seth Heasley authored
commit aaa51527 upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
-
James Ralston authored
commit 389cd784 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by:
-
Seth Heasley authored
commit 96d5d96a upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel DH89xxCC PCH. Signed-off-by:
-
Seth Heasley authored
commit 78140cfe upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel Lynx Point PCH. Signed-off-by:
-
Seiji Aguchi authored
commit 9f244e9c upstream. [Issue] When pstore is in panic and emergency-restart paths, it may be blocked in those paths because it simply takes spin_lock. This is an example scenario which pstore may hang up in a panic path: - cpuA grabs psinfo->buf_lock - cpuB panics and calls smp_send_stop - smp_send_stop sends IRQ to cpuA - after 1 second, cpuB gives up on cpuA and sends an NMI instead - cpuA is now in an NMI handler while still holding buf_lock - cpuB is deadlocked This case may happen if a firmware has a bug and cpuA is stuck talking with it more than one second. Also, this is a similar scenario in an emergency-restart path: - cpuA grabs psinfo->buf_lock and stucks in a firmware - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer. And then, cpuB is deadlocked by taking psinfo->buf_lock again. [Solution] This patch avoids the deadlocking issues in both panic and emergency_restart paths by introducing a function, is_non_blocking_path(), to check if a cpu can be blocked in current path. With this patch, pstore is not blocked even if another cpu has taken a spin_lock, in those paths by changing from spin_lock_irqsave to spin_trylock_irqsave. In addition, according to a comment of emergency_restart() in kernel/sys.c, spin_lock shouldn't be taken in an emergency_restart path to avoid deadlock. This patch fits the comment below. <snip> /** * emergency_restart - reboot the system * * Without shutting down any hardware or taking any locks * reboot the system. This is called when we know we are in * trouble so this is our best effort to reboot. This is * safe to call in interrupt context. */ void emergency_restart(void) <snip> Signed-off-by:
Seiji Aguchi <seiji.aguchi@hds.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> [bwh: Backported to 3.2: - Adjust context - Add #include <linux/kmsg_dump.h>] Signed-off-by:
-
Ian Abbott authored
commit 22056e2b upstream. Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting meaningful output from a Lab-PC+ in differential mode for AI cmds, but AI insn reads gave correct readings. He tracked it down to two problems, one of which is addressed by this patch. It seems that writing to the command3 register after writing to the command4 register in `labpc_ai_cmd()` messes up the differential reference bit setting in the command4 register. Set up the command4 register after the command3 register (as in `labpc_ai_rinsn()`) to avoid the problem. Thanks to Tuomas for suggesting the fix. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit 4c4bc25d upstream. Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting meaningful output from a Lab-PC+ in differential mode for AI cmds, but AI insn reads gave correct readings. He tracked it down to two problems, one of which is addressed by this patch. It seems the setting of the channel bits for particular scanning modes was incorrect for differential mode. (Only half the number of channels are available in differential mode; comedi refers to them as channels 0, 1, 2 and 3, but the hardware documentation refers to them as channels 0, 2, 4 and 6.) In differential mode, the setting of the channel enable bits in the command1 register should depend on whether the scan enable bit is set. Effectively, we need to double the comedi channel number when the scan enable bit is not set in differential mode. The scan enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or `MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is `MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`. The existing test for whether the comedi channel number needs to be doubled in differential mode is incorrect in `labpc_ai_cmd()`. This patch corrects the test. Thanks to Tuomas for suggesting the fix. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 08dcdbf6 ] It looks like its possible to open thousands of TCP IPv6 sessions on a server, all landing in a single slot of TCP hash table. Incoming packets have to lookup sockets in a very long list. We should hash all bits from foreign IPv6 addresses, using a salt and hash mix, not a simple XOR. inet6_ehashfn() can also separately use the ports, instead of xoring them. Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Li Wei authored
[ Upstream commit b531ed61 ] We should get 'type' and 'code' from the outer ICMP header. Signed-off-by:
Li Wei <lw@cn.fujitsu.com> Signed-off-by:
-
David Vrabel authored
[ Upstream commit 3e55f8b3 ] If the credit timer is left armed after calling xen_netbk_remove_xenvif(), then it may fire and attempt to schedule the vif which will then oops as vif->netbk == NULL. This may happen both in the fatal error path and during normal disconnection from the front end. The sequencing during shutdown is critical to ensure that: a) vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif is not freed. 1. Mark as unschedulable (netif_carrier_off()). 2. Synchronously cancel the timer. 3. Remove the vif from the schedule list. 4. Remove it from it netback thread group. 5. Wait for vif->refcnt to become 0. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Reported-by:
Christopher S. Aker <caker@theshore.net> Signed-off-by:
-
David Vrabel authored
[ Upstream commit 35876b5f ] netbk_count_requests() could detect an error, call netbk_fatal_tx_error() but return 0. The vif may then be used afterwards (e.g., in a call to netbk_tx_error(). Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may be freed immediately after the call to netbk_fatal_tx_error() (e.g., if the vif is also removed). Netback thread Xenwatch thread ------------------------------------------- netbk_fatal_tx_err() netback_remove() xenvif_disconnect() ... free_netdev() netbk_tx_err() Oops! Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 547b4e71 ] Spanning Tree Protocol packets should have always been marked as control packets, this causes them to get queued in the high prirority FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge gets overloaded and can't communicate. This is a long-standing bug back to the first versions of Linux bridge. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Jan Beulich authored
commit 51ac8893 upstream. ... as being guest triggerable (e.g. by invoking XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable). This is CVE-2013-0231 / XSA-43. Also make the two messages uniform in both their wording and severity. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [bwh: Backported to 3.2: add #include <linux/ratelimited.h>, needed by printk_ratelimited()] Signed-off-by:
-
Helge Deller authored
commit 4f4ffc3a upstream. automount-support is broken on the parisc architecture, because the existing #if list does not include a check for defined(__hppa__). The HPPA (parisc) architecture is similiar to other 64bit Linux targets where we have to define autofs_wqt_t (which is passed back and forth to user space) as int type which has a size of 32bit across 32 and 64bit kernels. During the discussion on the mailing list, H. Peter Anvin suggested to invert the #if list since only specific platforms (specifically those who do not have a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned long type. This suggestion is probably the best way to go, since Arm64 (and maybe others?) seems to have a non-working automounter. So in the long run even for other new upcoming architectures this inverted check seem to be the best solution, since it will not require them to change this #if again (unless they are 64bit only). Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
H. Peter Anvin <hpa@zytor.com> Acked-by:
Ian Kent <raven@themaw.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> CC: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Rolf Eike Beer <eike-kernel@sf-tec.de> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Heiko Carstens authored
commit d911e03d upstream. Since ed4f2094 "s390/time: fix sched_clock() overflow" a new helper function is used to avoid overflows when converting TOD format values to nanosecond values. The kvm interrupt code formerly however only worked by accident because of an overflow. It tried to program a timer that would expire in more than ~29 years. Because of the old TOD-to-nanoseconds overflow bug the real expiry value however was much smaller, but now it isn't anymore. This however triggers yet another bug in the function that programs the clock comparator s390_next_ktime(): if the absolute "expires" value is after 2042 this will result in an overflow and the programmed value is lower than the current TOD value which immediatly triggers a clock comparator (= timer) interrupt. Since the timer isn't expired it will be programmed immediately again and so on... the result is a dead system. To fix this simply program the maximum possible value if an overflow is detected. Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Alex Deucher authored
commit ed39fadd upstream. Some chips seem to need a little delay after blacking out the MC before the requests actually stop. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 https://bugs.freedesktop.org/show_bug.cgi?id=57567Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alexander Duyck authored
commit ae1c07a6 upstream. For some reason the reading of the RQDPC register was being artificially limited to 4K. Instead of limiting the value we should read the value and add the full amount. Otherwise this can lead to a misleading number of dropped packets when the actual value is in fact much higher. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit 3a2d63f8 upstream. There are two problems with shutdown in the NBD driver. 1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem. This patch adds the sync operation into __nbd_ioctl()'s NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted to processes that have CAP_SYS_ADMIN, and the NBD client may not possess it (fsync of the block device does not sync the filesystem, either). 2: Once we clear the socket we have no guarantee that later reads will come from the same backing storage. The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket clearing code so the page cache is cleaned, lest reads that hit on the page cache will return stale data from the previously-accessible disk. Example: # qemu-nbd -r -c/dev/nbd0 /dev/sr0 # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. # qemu-nbd -d /dev/nbd0 # qemu-nbd -r -c/dev/nbd0 /dev/sda # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. While /dev/sda has: # file -s /dev/sda /dev/sda: x86 boot sector; etc. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Signed-off-by:
-
