- 03 Dec, 2018 31 commits
-
-
Michael Tretter authored
Commit 0185f850 ("[media] samples: v4l: from Documentation to samples directory") moved the v4l2-pci-skeleton driver to the samples directory. The samples are only be built, if CONFIG_SAMPLES is enabled. Therefore, VIDEO_PCI_SKELETON is not enough to build the v4l2-pci-skeleton driver, but SAMPLES needs to be enabled, too. Let VIDEO_PCI_SKELETON depend on SAMPLES. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Michael Tretter authored
Commit 2d700715 ("[media] media: videobuf2: Restructure vb2_buffer") replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The restructuring skipped the v4l2-pci-skeleton, probably because it resides outside the drivers directory. The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer. This is not the case if the skel_buffer is based on vb2_buffer instead of vb2_v4l2_buffer. Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure that future drivers that are based on the skeleton use vb2_v4l2_buffer. Signed-off-by:
-
Sakari Ailus authored
The v4l_fill_fmtdesc() function does a good job in filling in pixelformat description. While generally all drivers should depend on this function doing the job, staging drivers that use their own formats may not. Allow staging drivers to fill in their own formats by checking whether the description begins with a non-nil character before issuing the warning. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jonas Karlman authored
intra_dc_precision is a 2-bit integer [1] allow use of all valid options, 8 - 11 bits precision [1] ISO/IEC 13818-2 Table 6-13 Fixes: c27bb30e ("media: v4l: Add definitions for MPEG-2 slice format and metadata") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Alexey Khoroshilov authored
If vpbe_set_default_output() or vpbe_set_default_mode() fails, vpbe_initialize() returns error code without releasing resources. The patch adds error handling for that case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Verkuil authored
Reorganize code to fix two smatch warnings: drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]' drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]' Signed-off-by:
-
Tomasz Figa authored
The encoder driver has no need to do any CPU access to the source frame buffers. Use a separate structure for holding DMA addresses and sizes for those and remove, so we do not end up introducing any erroneous dereferences of those VAs. This fixes DMA-buf import from exporters that do not provide contiguous kernel mappings, which includes the MTK DRM driver. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Todor Tomov authored
When streaming is starting ask the sensor for its skip frames value. Max supported frame skip is 29 frames, so clip it if it is higher. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Tim Harvey authored
The adv7180 produces 1 to 2 frames of garbage before proper sync is established. This allows V4L2 drivers and apps to skip those. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Colin Ian King authored
Fix name of the Hybrid T USB XS em28xx card, should be Cinergy. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in macro name and text string ERROR_SENSOR_ACTURATOR_INIT_FAIL -> ERROR_SENSOR_ACTUATOR_INIT_FAIL Signed-off-by:
-
Arnd Bergmann authored
Without CONFIG_HDMI, we get a link error for this driver: drivers/media/i2c/tda1997x.o: In function `tda1997x_parse_infoframe': tda1997x.c:(.text+0x2195): undefined reference to `hdmi_infoframe_unpack' tda1997x.c:(.text+0x21b6): undefined reference to `hdmi_infoframe_log' drivers/media/i2c/tda1997x.o: In function `tda1997x_log_infoframe': tda1997x.c:(.text.unlikely+0x13d3): undefined reference to `hdmi_infoframe_unpack' tda1997x.c:(.text.unlikely+0x1426): undefined reference to `hdmi_infoframe_log' All other drivers in this directory that use HDMI select CONFIG_HDMI, so do the same here: Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Daniel Axtens authored
Currently, disconnecting a USB webcam while it is in use prints out a number of warnings, such as: WARNING: CPU: 2 PID: 3118 at /build/linux-ezBi1T/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90 sysfs group ffffffffa7cd0780 not found for kobject 'event13' This has been noticed before. [0] This is because of the order in which things are torn down. If there are no streams active during a USB disconnect: - uvc_disconnect() is invoked via device_del() through the bus notifier mechanism. - this calls uvc_unregister_video(). - uvc_unregister_video() unregisters the video device for each stream, - because there are no streams open, it calls uvc_delete() - uvc_delete() calls uvc_status_cleanup(), which cleans up the status input device. - uvc_delete() calls media_device_unregister(), which cleans up the media device - uvc_delete(), uvc_unregister_video() and uvc_disconnect() all return, and we end up back in device_del(). - device_del() then cleans up the sysfs folder for the camera with dpm_sysfs_remove(). Because uvc_status_cleanup() and media_device_unregister() have already been called, this all works nicely. If, on the other hand, there *are* streams active during a USB disconnect: - uvc_disconnect() is invoked - this calls uvc_unregister_video() - uvc_unregister_video() unregisters the video device for each stream, - uvc_unregister_video() and uvc_disconnect() return, and we end up back in device_del(). - device_del() then cleans up the sysfs folder for the camera with dpm_sysfs_remove(). Because the status input device and the media device are children of the USB device, this also deletes their sysfs folders. - Sometime later, the final stream is closed, invoking uvc_release(). - uvc_release() calls uvc_delete() - uvc_delete() calls uvc_status_cleanup(), which cleans up the status input device. Because the sysfs directory has already been removed, this causes a WARNing. - uvc_delete() calls media_device_unregister(), which cleans up the media device. Because the sysfs directory has already been removed, this causes another WARNing. To fix this, we need to make sure the devices are always unregistered before the end of uvc_disconnect(). To this, move the unregistration into the disconnect path: - split uvc_status_cleanup() into two parts, one on disconnect that unregisters and one on delete that frees. - move v4l2_device_unregister() and media_device_unregister() into the disconnect path. [0]: https://lkml.org/lkml/2016/12/8/657 [Renamed uvc_input_cleanup() to uvc_input_unregister()] Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sergey Dorodnicov authored
Register the GUID used by Intel RealSense cameras with fourcc CNF4, encoding depth sensor confidence information for every pixel. Signed-off-by:
Sergey Dorodnicov <sergey.dorodnicov@intel.com> Signed-off-by:
Evgeni Raikhel <evgeni.raikhel@intel.com> Signed-off-by:
-
Sergey Dorodnicov authored
Adding new fourcc CNF4 for 4 bit-per-pixel packed depth confidence information provided by Intel RealSense cameras. Every two consecutive pixels are packed into a single byte. Signed-off-by:
-
Andrea Merello authored
In formats table the entry for CFA pattern "rggb" has GRBG fourcc. This patch fixes it. Signed-off-by:
Mirco Di Salvo <mirco.disalvo@iit.it> Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Signed-off-by:
-
Dhaval Shah authored
SPDX-License-Identifier is used for the Xilinx Video IP and related drivers. [Added drivers/media/platform/xilinx/Kconfig] [Added drivers/media/platform/xilinx/Makefile] [Added include/dt-bindings/media/xilinx-vip.h] Signed-off-by:
Dhaval Shah <dhaval23031987@gmail.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Neil Armstrong authored
This patchset adds an optional VCC regulator to the bindings of the Sony CXD2880 DVB-T2/T tuner + demodulator adapter. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Neil Armstrong authored
This patchset adds an optional VCC regulator to the driver probe function to make sure power is enabled to the module before starting attaching to the device. Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1075 dib0090_pwm_gain_reset() warn: '*&bb_ramp_pwm_normal' 2590696709486571520 can't fit into 65535 '*bb_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1083 dib0090_pwm_gain_reset() warn: '*&bb_ramp_pwm_normal_socs' 2590696709486571520 can't fit into 65535 '*bb_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1085 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_cband_8090' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1089 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_cband_7090e_sensitivity' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1093 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_cband_7090p' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1096 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_cband' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1101 dib0090_pwm_gain_reset() warn: '*&bb_ramp_pwm_normal_socs' 2590696709486571520 can't fit into 65535 '*bb_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1104 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_vhf' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1107 dib0090_pwm_gain_reset() warn: '*&bb_ramp_pwm_normal_socs' 2590696709486571520 can't fit into 65535 '*bb_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1109 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_uhf_8090' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1111 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_uhf_7090' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1113 dib0090_pwm_gain_reset() warn: '*&rf_ramp_pwm_uhf' 2590696709486571520 can't fit into 65535 '*rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1419 dib0090_update_rframp_7090() warn: '*&rf_ramp_pwm_cband_7090e_sensitivity' 2590696709486571520 can't fit into 65535 '*state->rf_ramp' drivers/media/dvb-frontends/dib0090.c: drivers/media/dvb-frontends/dib0090.c:1421 dib0090_update_rframp_7090() warn: '*&rf_ramp_pwm_cband_7090e_aci' 2590696709486571520 can't fit into 65535 '*state->rf_ramp' For no apparent reason this code casts away the const of the const u16 arrays, and it also takes the address of an array. While that's ignored in C I think smatch gets confused by it. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Julia Lawall authored
The dvb_frontend_ops structure is only copied into the ops field of a dvb_frontend structure, so it can be const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
zhong jiang authored
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
zhong jiang authored
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. Signed-off-by:
-
Neil Armstrong authored
When dvb_attach fails, probe returns 0, and remove crashes afterwards. This patch sets the return value to -ENODEV when attach fails. Fixes: bd24fcdd ("media: cxd2880-spi: Add support for CXD2880 SPI interface") Signed-off-by:
-
Victor Toso authored
Device should be either COLD or WARM. This change only make usage of the existing definition. Signed-off-by:
Victor Toso <me@victortoso.com> Signed-off-by:
-
Victor Toso authored
The switch before set is_af9035 or is_it9135 which makes the second switch redundant. Keeping the comment as to avoid sleep on IT9135. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the MODULE_PARM_DESC text, fix it. Signed-off-by:
-
Malcolm Priestley authored
commit 1a0c10ed ("media: dvb-usb-v2: stop using coherent memory for URBs") incorrectly adds URB_FREE_BUFFER after every urb transfer. It cannot use this flag because it reconfigures the URBs accordingly to suit connected devices. In doing a call to usb_free_urb is made and invertedly frees the buffers. The stream buffer should remain constant while driver is up. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> CC: stable@vger.kernel.org # v4.18+ Signed-off-by:
-
Sean Young authored
This simplifies the code a little. Tested with suspend and resume. Signed-off-by:
-
Alexandre Courbot authored
The last buffer is often signaled by an empty buffer with the V4L2_BUF_FLAG_LAST flag set. Such buffers were returned with the bytesused field set to the full size of the OPB, which leads user-space to believe that the buffer actually contains useful data. Fix this by passing the number of bytes reported used by the firmware. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Malathi Gottam authored
Any request for a change in bitrate after both planes are streamed on is handled by setting the target bitrate property to hardware. Signed-off-by:
Malathi Gottam <mgottam@codeaurora.org> Acked-by:
-
- 27 Nov, 2018 2 commits
-
-
Malathi Gottam authored
Max bitrate property is not supported for venus version 4xx. Return unsupported from packetization layer. Handle it in hfi_venus layer to exit gracefully to venc layer. Signed-off-by:
-
Malathi Gottam authored
Add USERPTR to queue access methods by adding this support to io_modes on both the planes. Signed-off-by:
-
- 23 Nov, 2018 7 commits
-
-
Mauro Carvalho Chehab authored
The dvb_frontend core already checks for the frequencies. No need for any additional check inside the driver. It is part of the fixes for the following bug: https://bugzilla.opensuse.org/show_bug.cgi?id=1116374 Fixes: a3f90c75 ("media: dvb: convert tuner_info frequencies to Hz") Reported-by:
Stakanov Schufter <stakanov@eclipso.eu> Reported-by:
Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org # For 4.19 Signed-off-by:
-
Mauro Carvalho Chehab authored
Tuners should report frequencies in Hz. That works fine on most drivers, but, in the case of dvb-pll, some settings are for satellite tuners, while others are for terrestrial/cable ones. The code was trying to solve it at probing time, but that doesn't work, as, when _attach is called, the delivery system may be wrong. Fix it by ensuring that all frequencies are in Hz at the per-tuner max/min values. While here, add a debug message, as this would help to debug any issues there. It partially fixes the following bug: https://bugzilla.opensuse.org/show_bug.cgi?id=1116374 Fixes: a3f90c75 ("media: dvb: convert tuner_info frequencies to Hz") Reported-by:
-
Mauro Carvalho Chehab authored
As we did an internal change inside the subsystem to always represent min/max frequencies in Hz, add a debug message, as this would help to discover bugs on drivers, if any. Signed-off-by: -
Mauro Carvalho Chehab authored
The dvb_frontend dprintk() macro already prints __func__. So, we don't need to add it again at the printed message. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/common/videobuf2/videobuf2-core.c: drivers/media/common/videobuf2/videobuf2-core.c:2159 vb2_mmap() warn: inconsistent returns 'mutex:&q->mmap_lock'. Locked on: line 2148 Unlocked on: line 2100 line 2108 line 2113 line 2118 line 2156 line 2159 There is one error condition that doesn't unlock a mutex. Fixes: cd26d1c4 ("media: vb2: vb2_mmap: move lock up") Reviewed-by: -
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/platform/seco-cec/seco-cec.c:338:21: warning: symbol 'secocec_cec_adap_ops' was not declared. Should it be static? This struct should be static. Also, it is const, so declare it as such. Signed-off-by: -
Hans Verkuil authored
Fix the incorrect obj-y. Signed-off-by:
-
