- 11 Mar, 2019 8 commits
-
-
Jiada Wang authored
lockdep warns us that priv->lock and k->k_lock can cause a deadlock when after acquire of k->k_lock, process is interrupted by src, while in another routine of src .init, k->k_lock is acquired with priv->lock held. This patch avoids a potential deadlock by not calling soc_device_match() in SRC .init callback, instead it adds new soc fields in priv->flags to differentiate SoCs. Fixes: linux-next commit 7674bec4 ("ASoC: rsnd: update BSDSR/BSDISR handling") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
- Declare SR as volatile, as it is changed by hardware. - Remove TXDR from readable and volatile register list, as it is intended for write accesses only. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
John Hsu authored
The driver has two issues when machine add prefix name for codec. (1)The stream name of DAI can't find the AIF widgets. (2)The drivr can enable/disalbe the MICBIAS and SAR widgets. The patch will fix these issues caused by prefixed name added. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
KaiChieh Chuang authored
The dpcm get from fe_clients/be_clients may be free before use Add a spin lock at snd_soc_card level, to protect the dpcm instance. The lock may be used in atomic context, so use spin lock. Use irq spin lock version, since the lock may be used in interrupts. possible race condition between void dpcm_be_disconnect( ... list_del(&dpcm->list_be); list_del(&dpcm->list_fe); kfree(dpcm); ... and for_each_dpcm_fe() for_each_dpcm_be*() race condition example Thread 1: snd_soc_dapm_mixer_update_power() -> soc_dpcm_runtime_update() -> dpcm_be_disconnect() -> kfree(dpcm); Thread 2: dpcm_fe_dai_trigger() -> dpcm_be_dai_trigger() -> snd_soc_dpcm_can_be_free_stop() -> if (dpcm->fe == fe) Excpetion Scenario: two FE link to same BE FE1 -> BE FE2 -> Thread 1: switch of mixer between FE2 -> BE Thread 2: pcm_stop FE1 Exception: Unable to handle kernel paging request at virtual address dead0000000000e0 pc=<> [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c sound/soc/soc-pcm.c:3226 if (dpcm->fe == fe) lr=<> [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c Backtrace: [<ffffff89602dba80>] notify_die+0x68/0xb8 [<ffffff896028c7dc>] die+0x118/0x2a8 [<ffffff89602a2f84>] __do_kernel_fault+0x13c/0x14c [<ffffff89602a27f4>] do_translation_fault+0x64/0xa0 [<ffffff8960280cf8>] do_mem_abort+0x4c/0xd0 [<ffffff8960282ad0>] el1_da+0x24/0x40 [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c [<ffffff8960e2edec>] dpcm_fe_dai_trigger+0x3c/0x44 [<ffffff8960de5588>] snd_pcm_do_stop+0x50/0x5c [<ffffff8960dded24>] snd_pcm_action+0xb4/0x13c [<ffffff8960ddfdb4>] snd_pcm_drop+0xa0/0x128 [<ffffff8960de69bc>] snd_pcm_common_ioctl+0x9d8/0x30f0 [<ffffff8960de1cac>] snd_pcm_ioctl_compat+0x29c/0x2f14 [<ffffff89604c9d60>] compat_SyS_ioctl+0x128/0x244 [<ffffff8960283740>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
If playback and capture are enabled concurrently, when the capture stops the output becomes inaudile. The playback application will become stuck and underrun after a timeout. This is caused by mistaken use of the stream_id, which should only be set for playback and not for capture Tested on Apollolake and Kabylake with SST driver. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
The current implementation of the hdac_hda codec results in zero-valued samples on capture and noise with headset playback when SOF is used on platforms with an on-board HDaudio codec. This is root-caused to SOF using be_hw_params_fixup, and the prepare() call using invalid runtime fields to determine the format. This patch moves the format handling to the hw_params() callback, as done already for hdac_hdmi, to make sure the fixed-up information is taken into account but keeps the codec initialization in prepare() as the stream_tag is only available at that time. Moving everything in the prepare() callback is possible but the code is less elegant so this two-step solution was chosen. The solution was tested with the SST driver with no regressions, and all the issues with SOF playback and capture are solved. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
On HDaudio platforms, if playback is started when capture is working, there is no audible output. This can be root-caused to the use of the rx|tx_mask to store an HDaudio stream tag. If capture is stared before playback, rx_mask would be non-zero on HDaudio platform, then the channel number of playback, which is in the same codec dai with the capture, would be changed by soc_pcm_codec_params_fixup based on the tx_mask at first, then overwritten by this function based on rx_mask at last. According to the author of tx|rx_mask, tx_mask is for playback and rx_mask is for capture. And stream direction is checked at all other references of tx|rx_mask in ASoC, so here should be an error. This patch checks stream direction for tx|rx_mask for fixup function. This issue would affect not only HDaudio+ASoC, but also I2S codecs if the channel number based on rx_mask is not equal to the one for tx_mask. It could be rarely reproduecd because most drivers in kernel set the same channel number to tx|rx_mask or rx_mask is zero. Tested on all platforms using stream_tag & HDaudio and intel I2S platforms. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Sylwester Nawrocki authored
This patch sets missing stream_name of capture part of the DAI driver so we can define DAPM routing properly also for the capture stream. While at it "Playback" suffix is added to the playback stream names to clearly identify playback/capture. Together with related dts patch this fixes NULL pointer dereference when opening ALSA device for recording on Odroid XU3. Fixes: 64aba9bc ("ASoC: samsung: i2s: Add widgets and routes for DPCM support") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Mar, 2019 3 commits
-
-
Jonathan Hunter authored
Commit 78a24e10 ("ASoC: soc-core: clear platform pointers on error") re-worked the clean-up of any platform pointers that may have been initialised by the function snd_soc_init_platform(). This commit missed one error path where if any of the prelinks for a soundcard failed to initialise, then these platform pointers would not be cleaned-up. This then prevents the soundcard from being initialised following a probe deferral when any of the soundcard prelinks cannot be found. Fix this by ensuring that soc_cleanup_platform() is called when initialising the soundcard prelinks fails. Fixes: 78a24e10 ("ASoC: soc-core: clear platform pointers on error") Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Russell King authored
Limiting the value of the passed in params->msbits in the hw_params() callback is redundant on three counts: 1. We already specify in the DAI driver that we can only handle up to 24 bits. This means msbits will be limited to 24 via the ALSA constraints imposed by the ASoC core, unless we have multiple codecs that can handle more bits. 2. Nothing in our hw_params() implementation uses this value. 3. The copy of the params that we are passed by the ASoC core never reads back the msbits value. Consequently, this code is unnecessary and does nothing useful. Remove it. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
-
- 03 Mar, 2019 7 commits
-
-
Olivier Moysan authored
Add error check on set_sync function return. Add of_node_put() as of_get_parent() takes a reference which has to be released. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Set OSR bit if mclk/fs ratio is 512. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
When snd_pcm_stop_xrun() is called in interrupt routine, substream context may have already been released. Add protection on substream context. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Change capabilities exposed in SAI S/PDIF mode, to match actually supported formats. In S/PDIF mode only 32 bits stereo is supported. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Allow indexation of sai iec958 controls according to device id. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: In file included from sound/soc/codecs/ab8500-codec.c:24: sound/soc/codecs/ab8500-codec.c: In function ‘ab8500_codec_set_dai_fmt’: ./include/linux/device.h:1485:2: warning: this statement may fall through [-Wimplicit-fallthrough=] _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/soc/codecs/ab8500-codec.c:2129:3: note: in expansion of macro ‘dev_err’ dev_err(dai->component->dev, ^~~~~~~ sound/soc/codecs/ab8500-codec.c:2132:2: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Russell King authored
When using the S/PDIF DAI, there is no requirement to call snd_soc_dai_set_fmt() as there is no DAI format definition that defines S/PDIF. In any case, S/PDIF does not have separate clocks, this is embedded into the data stream. Consequently, when attempting to use TDA998x in S/PDIF mode, the attempt to configure TDA998x via the hw_params callback fails as the hdmi_codec_daifmt is left initialised to zero. Since the S/PDIF DAI will only be used by S/PDIF, prepare the hdmi_codec_daifmt structure for this format. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Feb, 2019 2 commits
-
-
KaiChieh Chuang authored
add direct loopback path from rx to tx Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Philipp Puschmann authored
This patch fixes a bug that prevents freeing the reset gpio on unloading the module. aic3x_i2c_probe is called when loading the module and it calls list_add with a probably uninitialized list entry aic3x->list (next = prev = NULL)). So even if list_del is called it does nothing and in the end the gpio_reset is not freed. Then a repeated module probing fails silently because gpio_request fails. When moving INIT_LIST_HEAD to aic3x_i2c_probe we also have to move list_del to aic3x_i2c_remove because aic3x_remove may be called multiple times without aic3x_i2c_remove being called which leads to a NULL pointer dereference. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 26 Feb, 2019 11 commits
-
-
Olivier Moysan authored
Dummy write in capture master mode is used to gate bus clocks. This write is useless in slave mode as the clocks are not managed by slave. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
When snd_pcm_stop_xrun() is called in interrupt routine, substream context may have already been released. Add protection on substream context. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Clocks do not need to be released on driver removal, as this is already managed before. Remove useless remove callback. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
DMA configuration is not balanced on start/stop. Move DMA configuration to trigger callback. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Move counter handling to trigger start section to manage multiple start/stop events. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
I2S supports 16 bits data in 32 channel length. However the expected driver behavior, is to set channel length to 16 bits when data format is 16 bits. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Because of regmap cache, interrupts may not be cleared as expected. Declare IFCR register as write only and make writings to IFCR register unconditional. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
-
Cheng-Yi Chiang authored
SND_SOC_CROS_EC_CODEC depends on MFD_CROS_EC. Add that dependency to SND_SOC_SDM845 to fix unmet direct dependencies warning. Fixes: 74c6ecf4 (ASoC: qcom: Kconfig: select dmic for sdm845) Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jenny TC authored
This patch enables the reuse of kbl_da7219_max98927 machine driver to support max98373. The same machine driver is modified for cases where one amplifier is swapped out with another. Most of the changes are about renaming the codec and codec_dai names, with minor differences due to support for 24 bits in one case and 16 in the other. Signed-off-by: Jenny TC <jenny.tc@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jiada Wang authored
Currently each SSI unit 's busif mode/adinr/dalign address is registered by: (in busif4 case) RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80) But according to user manual 41.1.4 Register Configuration ssi9 4/5/6/7 busif mode/adinr/dalign register address ( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] ) are out of this rule. This patch registers ssi9 4/5/6/7 mode/adinr/dalign register as single register, and access these registers in case of SSI9 BUSIF 4/5/6/7. Fixes: commit 8c9d7503 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Feb, 2019 6 commits
-
-
Charles Keepax authored
As the compressed stream implementation has acquired support for multiple DAI links and compressed streams it has become harder to interpret messages in the kernel log. Add additional macros to include the compressed DAI name in the log messages, allowing different streams to be easily disambiguated. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Stuart Henderson authored
Currently, only a single compressed stream is supported per firmware. Add support for multiple compressed streams on a single firmware, this allows additional features like completely independent trigger words or separate debug capture streams to be implemented. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Make the code slightly clearer and prepare things for the addition of multiple compressed streams on a single DSP core. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
In preparation for more refactoring add a helper function to strip the padding from ADSP data. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The irq_get_irq_data() function doesn't return error pointers, it returns NULL. Fixes: 6ba9dd6c ("ASoC: cs35l36: Add support for Cirrus CS35L36 Amplifier") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Feb, 2019 1 commit
-
-
Sylwester Nawrocki authored
This addresses an issue pointed out by compiler warning: sound/soc/samsung/odroid.c: In function ‘odroid_audio_probe’: sound/soc/samsung/odroid.c:298:22: warning: ‘cpu_dai’ may be used uninitialized in this function [-Wmaybe-uninitialized] priv->clk_i2s_bus = of_clk_get_by_name(cpu_dai, "iis"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 20 Feb, 2019 2 commits
-
-
Takashi Iwai authored
Although qcom_snd_parse_of() tries to manage the of-node refcount, there are still a few places that lead to the unblanced refcount in the error code path. Namely, - for_each_child_of_node() needs to unreference the iterator node if aborting the loop in the middle, - cpu, codec and platform node objects have to be unreferenced at each iteration, - platform and codec node objects have to be referred before jumping to the error handling code that unreference them unconditionally. This patch tries to address these by moving the assignment of platform and codec node objects to the beginning of the loop and adding the of_node_put() calls adequately. Fixes: c25e295c ("ASoC: qcom: Add support to parse common audio device nodes") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The apq8016 driver leaves the of-node refcount at aborting from the loop of for_each_child_of_node() in the error path. Not only the iterator node of for_each_child_of_node(), the children nodes referred from it for codec and cpu have to be properly unreferenced. Fixes: bdb052e8 ("ASoC: qcom: add apq8016 sound card support") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-