syn_data was allocated by sk_stream_alloc_skb(), meaning
its destructor and _skb_refdst fields are mangled.

We need to call tcp_skb_tsorted_anchor_cleanup() before
calling kfree_skb() or kernel crashes.

Bug was reported by syzkaller bot.

Fixes: e2080072 ("tcp: new list for sent but unacked skbs for RACK recovery")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
ipv6: fixes for RTF_CACHE entries

This series addresses 2 different but related issues with RTF_CACHE
introduced by the recent refactory.

patch 1 restore the gc timer for such routes
patch 2 removes the aged out dst from the fib tree, properly coping with pMTU
routes

v1 -> v2:
 - dropped the  for ip route show cache
 - avoid touching dst.obsolete when the dst is aged out

v2 -> v3:
 - take care of pMTU exceptions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 2b760fcf ("ipv6: hook up exception table to store
dst cache") partially reverted the commit 1e2ea8ad ("ipv6: set
dst.obsolete when a cached route has expired").

As a result, RTF_CACHE dst referenced outside the fib tree will
not be removed until the next sernum change; dst_check() does not
fail on aged-out dst, and dst->__refcnt can't decrease: the aged
out dst will stay valid for a potentially unlimited time after the
timeout expiration.

This change explicitly removes RTF_CACHE dst from the fib tree when
aged out. The rt6_remove_exception() logic will then obsolete the
dst and other entities will drop the related reference on next
dst_check().

pMTU exceptions are not aged-out, and are removed from the exception
table only when the - usually considerably longer - ip6_rt_mtu_expires
timeout expires.

v1 -> v2:
  - do not touch dst.obsolete in rt6_remove_exception(), not needed
v2 -> v3:
  - take care of pMTU exceptions, too

Fixes: 2b760fcf ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the commit 2b760fcf ("ipv6: hook up exception table
to store dst cache"), the fib6 gc is not started after the
creation of a RTF_CACHE via a redirect or pmtu update, since
fib6_add() isn't invoked anymore for such dsts.

We need the fib6 gc to run periodically to clean the RTF_CACHE,
or the dst will stay there forever.

Fix it by explicitly calling fib6_force_start_gc() on successful
exception creation. gc_args->more accounting will ensure that
the gc timer will run for whatever time needed to properly
clean the table.

v2 -> v3:
 - clarified the commit message

Fixes: 2b760fcf ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Chenbo Feng says:

====================
bpf: security: New file mode and LSM hooks for eBPF object permission control

Much like files and sockets, eBPF objects are accessed, controlled, and
shared via a file descriptor (FD). Unlike files and sockets, the
existing mechanism for eBPF object access control is very limited.
Currently there are two options for granting accessing to eBPF
operations: grant access to all processes, or only CAP_SYS_ADMIN
processes. The CAP_SYS_ADMIN-only mode is not ideal because most users
do not have this capability and granting a user CAP_SYS_ADMIN grants too
many other security-sensitive permissions. It also unnecessarily allows
all CAP_SYS_ADMIN processes access to eBPF functionality. Allowing all
processes to access to eBPF objects is also undesirable since it has
potential to allow unprivileged processes to consume kernel memory, and
opens up attack surface to the kernel.

Adding LSM hooks maintains the status quo for systems which do not use
an LSM, preserving compatibility with userspace, while allowing security
modules to choose how best to handle permissions on eBPF objects. Here
is a possible use case for the lsm hooks with selinux module:

The network-control daemon (netd) creates and loads an eBPF object for
network packet filtering and analysis. It passes the object FD to an
unprivileged network monitor app (netmonitor), which is not allowed to
create, modify or load eBPF objects, but is allowed to read the traffic
stats from the map.

Selinux could use these hooks to grant the following permissions:
allow netd self:bpf_map { create read write};
allow netmonitor netd:fd use;
allow netmonitor netd:bpf_map read;

In this patch series, A file mode is added to bpf map to store the
accessing mode. With this file mode flags, the map can be obtained read
only, write only or read and write. With the help of this file mode,
several security hooks can be added to the eBPF syscall implementations
to do permissions checks. These LSM hooks are mainly focused on checking
the process privileges before it obtains the fd for a specific bpf
object. No matter from a file location or from a eBPF id. Besides that,
a general check hook is also implemented at the start of bpf syscalls so
that each security module can have their own implementation on the reset
of bpf object related functionalities.

In order to store the ownership and security information about eBPF
maps, a security field pointer is added to the struct bpf_map. And the
last two patch set are implementation of selinux check on these hooks
introduced, plus an additional check when eBPF object is passed between
processes using unix socket as well as binder IPC.

Change since V1:

 - Whitelist the new bpf flags in the map allocate check.
 - Added bpf selftest for the new flags.
 - Added two new security hooks for copying the security information from
   the bpf object security struct to file security struct
 - Simplified the checking action when bpf fd is passed between processes.

 Change since V2:

 - Fixed the line break problem for map flags check
 - Fixed the typo in selinux check of file mode.
 - Merge bpf_map and bpf_prog into one selinux class
 - Added bpf_type and bpf_sid into file security struct to store the
   security information when generate fd.
 - Add the hook to bpf_map_new_fd and bpf_prog_new_fd.

 Change since V3:

 - Return the actual error from security check instead of -EPERM
 - Move the hooks into anon_inode_getfd() to avoid get file again after
   bpf object file is installed with fd.
 - Removed the bpf_sid field inside file_scerity_struct to reduce the
   cache size.

 Change since V4:

 - Rename bpf av prog_use to prog_run to distinguish from fd_use.
 - Remove the bpf_type field inside file_scerity_struct and use bpf fops
   to indentify bpf object instead.

 Change since v5:

 - Fixed the incorrect selinux class name for SECCLASS_BPF

 Change since v7:

 - Fixed the build error caused by xt_bpf module.
 - Add flags check for bpf_obj_get() and bpf_map_get_fd_by_id() to make it
   uapi-wise.
 - Add the flags field to the bpf_obj_get_user function when BPF_SYSCALL
   is not configured.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a bpf object related check when sending and receiving files
through unix domain socket as well as binder. It checks if the receiving
process have privilege to read/write the bpf map or use the bpf program.
This check is necessary because the bpf maps and programs are using a
anonymous inode as their shared inode so the normal way of checking the
files and sockets when passing between processes cannot work properly on
eBPF object. This check only works when the BPF_SYSCALL is configured.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the actual checks introduced to eBPF related syscalls. This
implementation use the security field inside bpf object to store a sid that
identify the bpf object. And when processes try to access the object,
selinux will check if processes have the right privileges. The creation
of eBPF object are also checked at the general bpf check hook and new
cmd introduced to eBPF domain can also be checked there.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce several LSM hooks for the syscalls that will allow the
userspace to access to eBPF object such as eBPF programs and eBPF maps.
The security check is aimed to enforce a per object security protection
for eBPF object so only processes with the right priviliges can
read/write to a specific map or use a specific eBPF program. Besides
that, a general security hook is added before the multiplexer of bpf
syscall to check the cmd and the attribute used for the command. The
actual security module can decide which command need to be checked and
how the cmd should be checked.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two related tests are added into bpf selftest to test read only map and
write only map. The tests verified the read only and write only flags
are working on hash maps.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce the map read/write flags to the eBPF syscalls that returns the
map fd. The flags is used to set up the file mode when construct a new
file descriptor for bpf maps. To not break the backward capability, the
f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise
it should be O_RDONLY or O_WRONLY. When the userspace want to modify or
read the map content, it will check the file mode to see if it is
allowed to make the change.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller got crashes at dismantle time [1]

It is not correct to test (tun->flags & IFF_NAPI) in tun_napi_disable()
and tun_napi_del() : Each tun_file can have different mode, depending
on how they were created.

Similarly I have changed tun_get_user() and tun_poll_controller()
to use the new tfile->napi_enabled boolean.

[  154.331360] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  154.339220] IP: [<ffffffff9634cad6>] hrtimer_active+0x26/0x60
[  154.344983] PGD 0
[  154.347009] Oops: 0000 [#1] SMP
[  154.350680] gsmi: Log Shutdown Reason 0x03
[  154.379572] task: ffff994719150dc0 ti: ffff99475c0ae000 task.ti: ffff99475c0ae000
[  154.387043] RIP: 0010:[<ffffffff9634cad6>]  [<ffffffff9634cad6>] hrtimer_active+0x26/0x60
[  154.395232] RSP: 0018:ffff99475c0afce8  EFLAGS: 00010246
[  154.400542] RAX: ffff994754850ac0 RBX: ffff994753e65408 RCX: ffff994753e65388
[  154.407666] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff994753e65408
[  154.414790] RBP: ffff99475c0afce8 R08: 0000000000000000 R09: 0000000000000000
[  154.421921] R10: ffff99475f6f5910 R11: 0000000000000001 R12: 0000000000000000
[  154.429044] R13: ffff99417deab668 R14: ffff99417deaa780 R15: ffff99475f45dde0
[  154.436174] FS:  0000000000000000(0000) GS:ffff994767a00000(0000) knlGS:0000000000000000
[  154.444249] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  154.449986] CR2: 0000000000000000 CR3: 00000005a8a0e000 CR4: 0000000000022670
[  154.457110] Stack:
[  154.459120]  ffff99475c0afd28 ffffffff9634d614 1000000000000000 0000000000000000
[  154.466598]  ffffe54240000000 ffff994753e65408 ffff994753e653a8 ffff99417deab668
[  154.474067]  ffff99475c0afd48 ffffffff9634d6fd ffff99474c2be678 ffff994753e65398
[  154.481537] Call Trace:
[  154.483985]  [<ffffffff9634d614>] hrtimer_try_to_cancel+0x24/0xf0
[  154.490074]  [<ffffffff9634d6fd>] hrtimer_cancel+0x1d/0x30
[  154.495563]  [<ffffffff96860b3c>] napi_disable+0x3c/0x70
[  154.500875]  [<ffffffff9678ae62>] __tun_detach+0xd2/0x360
[  154.506272]  [<ffffffff9678b117>] tun_chr_close+0x27/0x40
[  154.511669]  [<ffffffff9646ebe6>] __fput+0xd6/0x1e0
[  154.516548]  [<ffffffff9646ed3e>] ____fput+0xe/0x10
[  154.521429]  [<ffffffff963035a2>] task_work_run+0x72/0x90
[  154.526827]  [<ffffffff962e9407>] do_exit+0x317/0xb60
[  154.531879]  [<ffffffff962e9c8f>] do_group_exit+0x3f/0xa0
[  154.537275]  [<ffffffff962e9d07>] SyS_exit_group+0x17/0x20
[  154.542769]  [<ffffffff969784be>] entry_SYSCALL_64_fastpath+0x12/0x17

Fixes: 94317099 ("net-tun: enable NAPI for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All of the notifier data (fib_info, tos, type and table id) are
contained in the fib_alias. Pass it to the notifier instead of
each data separately shortening the argument list by 3.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New socket option TCP_FASTOPEN_KEY to allow different keys per
listener.  The listener by default uses the global key until the
socket option is set.  The key is a 16 bytes long binary data. This
option has no effect on regular non-listener TCP sockets.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
mlxsw: spectrum_router: Add extack messages for RIF and VRF overflow

Currently, exceeding the number of VRF instances or the number of router
interfaces either fails with a non-intuitive EBUSY:
    $ ip li set swp1s1.6 vrf vrf-1s1-6 up
    RTNETLINK answers: Device or resource busy

or fails silently (IPv6) since the checks are done in a work queue. This
set adds support for the address validator notifier to spectrum which
allows ext-ack based messages to be returned on failure.

To make that happen the IPv6 version needs to be converted from atomic
to blocking (patch 2), and then support for extack needs to be added
to the notifier (patch 3). Patch 1 reworks the locking in ipv6_add_addr
to work better in the atomic and non-atomic code paths. Patches 4 and 5
add the validator notifier to spectrum and then plumb the extack argument
through spectrum_router.

With this set, VRF overflows fail with:
   $ ip li set swp1s1.6 vrf vrf-1s1-6 up
   Error: spectrum: Exceeded number of supported VRF.

and RIF overflows fail with:
   $ ip addr add dev swp1s2.191 10.12.191.1/24
   Error: spectrum: Exceeded number of supported router interfaces.

v2 -> v3
- fix surround context of patch 4 which was altered by c30f5d01

v1 -> v2
- fix error path in ipv6_add_addr: reset rt to NULL (Ido comment) and
  add in6_dev_put on ifa once the hold has been done

RFC -> v1
- addressed various comments from Ido
- refactored ipv6_add_addr to allow ifa's to be allocated with
  GFP_KERNEL as requested by DaveM
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add extack argument down to mlxsw_sp_rif_create and mlxsw_sp_vr_create
to set an error message on RIF or VR overflow. Now on overflow of
either resource the user gets an informative message as opposed to
failing with EBUSY.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for inetaddr_validator and inet6addr_validator. The
notifiers provide a means for validating ipv4 and ipv6 addresses
before the addresses are installed and on failure the error
is propagated back to the user.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add extack to in_validator_info and in6_validator_info. Update the one
user of each, ipvlan, to return an error message for failures.

Only manual configuration of an address is plumbed in the IPv6 code path.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet6addr_validator chain was added by commit 3ad7d246 ("Ipvlan
should return an error when an address is already in use") to allow
address validation before changes are committed and to be able to
fail the address change with an error back to the user. The address
validation is not done for addresses received from router
advertisements.

Handling RAs in softirq context is the only reason for the notifier
chain to be atomic versus blocking. Since the only current user, ipvlan,
of the validator chain ignores softirq context, the notifier can be made
blocking and simply not invoked for softirq path.

The blocking option is needed by spectrum for example to validate
resources for an adding an address to an interface.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6_add_addr is called in process context with rtnl lock held
(e.g., manual config of an address) or during softirq processing
(e.g., autoconf and address from a router advertisement).

Currently, ipv6_add_addr calls rcu_read_lock_bh shortly after entry
and does not call unlock until exit, minus the call around the address
validator notifier. Similarly, addrconf_hash_lock is taken after the
validator notifier and held until exit. This forces the allocation of
inet6_ifaddr to always be atomic.

Refactor ipv6_add_addr as follows:
1. add an input boolean to discriminate the call path (process context
   or softirq). This new flag controls whether the alloc can be done
   with GFP_KERNEL or GFP_ATOMIC.

2. Move the rcu_read_lock_bh and unlock calls only around functions that
   do rcu updates.

3. Remove the in6_dev_hold and put added by 3ad7d246 ("Ipvlan should
   return an error when an address is already in use."). This was done
   presumably because rcu_read_unlock_bh needs to be called before calling
   the validator. Since rcu_read_lock is not needed before the validator
   runs revert the hold and put added by 3ad7d246 and only do the
   hold when setting ifp->idev.

4. move duplicate address check and insertion of new address in the global
   address hash into a helper. The helper is called after an ifa is
   allocated and filled in.

This allows the ifa for manually configured addresses to be done with
GFP_KERNEL and reduces the overall amount of time with rcu_read_lock held
and hash table spinlock held.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/net: updates 2017-10-18

please apply some additional robustness fixes and cleanups for 4.15.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A few lines down, qeth_prepare_control_data() makes further changes to
the control cmd buffer, and then also writes a trace entry for it.
So the first entry just pollutes the trace file with intermediate data,
drop it.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch to napi_complete_done(), and thus enable delayed GRO flushing.
The timeout is configured via /sys/class/net/<if>/gro_flush_timeout.

Default timeout is 0, so no change in behaviour.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code bails out when two subsequent buffer elements hold
insufficient data to contain a qeth_hdr packet descriptor.
This seems reasonable, but it would be legal for quirky hardware to
leave a few elements empty and then present packets in a subsequent
element. These packets would currently be dropped.

So make sure to check all buffer elements, until we hit the LAST_ENTRY
indication.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the allocation of SG skbs into the main path. This allows for
a little code sharing, and handling ENOMEM from within one place.

As side effect, L2 SG skbs now get the proper amount of additional
headroom (read: zero) instead of the hard-coded ETH_HLEN.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the open-coded skb_add_rx_frag(), and use a fall-through
to remove some duplicated code.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of silently discarding VLAN registration requests on OSM,
just indicate that this card type doesn't support VLAN.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no reason why l2_set_mac_address() should ever be called for
a netdevice that's not owned by qeth. It's certainly not required for
VLAN devices, which have their own netdev_ops.

Also:
1) we don't do such validation for any of the other netdev_ops routines.
2) the code in question clearly has never been actually exercised;
   it's broken. After determining that the device is not owned
   by qeth, it would still use dev->ml_priv to write a qeth trace entry.

Remove the check, and its helper that walked the global card list.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Drop the support for Token Ring,
2. use the ETH_DATA_LEN macro for the default L2 MTU,
3. handle OSM via the default case (as OSM is L2-only), and
4. document why the L3 MTU is reduced.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the allocation of the addr buffer fails, we need to free
our refcount on the inetdevice before returning.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sysfs enabled value is a boolean, so kstrtobool() is a better fit
for parsing the input string since it does the range checking for us.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit "s390/ccwgroup: tie a ccwgroup driver to its ccw driver",
the ccwgroup core now ensures that a qeth group device only consists of
ccw devices which are supported by qeth. Therefore remove qeth's
internal device matching, and use .driver_info to determine the card
type.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When recovering a device, qeth needs to re-run the IPA commands that
enable all previously active HW features.
Instead of duplicating qeth_set_features(), let netdev_update_features()
recover the missing HW features from dev->wanted_features.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the netdevice field is not set and the egdev instance
is not functional, fix that.

Fixes: 3f55bdda8df ('net: sched: introduce per-egress action device callbacks')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: enable more tc flower offload matches and actions

This patch series enable more matches and actions for TC Flower
Offload support on Chelsio adapters.

Patch 1 enables matching on IP TOS.

Patch 2 enables matching on VLAN TCI.

Patch 3 adds support for action PASS.

Patch 4 adds support for ETH-DMAC rewrite via TC-PEDIT action. Also,
adds a check to assert that vlan/eth-dmac rewrite actions are valid
only in combination with action egress redirect.

Patch 5 introduces SMT ops for adding/removing entries from SMAC Table
in HW in preparation for patch 6.

Patch 6 adds support for ETH-SMAC rewrite via TC-PEDIT action.

Patch 7 introduces fw_filter2_wr to support L3/L4 header rewrites
in preparation for patch 8.

Patch 8 adds support for rewrite on L3/L4 header fields via TC-PEDIT
action. Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support to rewrite L3/L4 fields via TC-PEDIT action.
Supported fields for rewrite are:
IPv4 src/dst address, IPv6 src/dst address, TCP/UDP sport/dport.

Also, process match fields first and then process the action items.

Refactor pedit action validation to separate function to avoid
excessive code indentation.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update driver to use new fw_filter2_wr in order to support rewrite of
L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR
to check whether FW supports this new wr.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for ETH-SMAC rewrite via TC-PEDIT action.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce SMT operations for allocating/removing entries from
SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite
is required.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ETH-DMAC Rewrite via TC-PEDIT action. Also, add
check to assert that vlan/eth-dmac rewrite actions are valid only
in combination with action egress redirect.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>