- 22 Mar, 2016 32 commits
-
-
Alexandre Bounine authored
Add check for attempts to request mapping of inbound RapidIO address space that overlaps with existing active mapping windows. Tsi721 device does not support overlapped inbound windows and SRIO address decoding behavior is not defined in such cases. This patch is applicable to kernel versions starting from v3.7. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Remove use of hardcoded setting for Maximum Read Request Size (MRRS) value and use one set by PCIe bus driver. Using hardcoded value can cause PCIe bus errors on platforms that have tsi721 device on PCIe path that allows only smaller read request sizes. This fix is applicable to kernel versions starting from v3.2. Signed-off-by:
-
Aurelien Jacquiot authored
These patches are the result of extensive collaboration within the RapidIO.org Software Task Group between Texas Instruments, Freescale, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes the capabilities of RapidIO devices directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. The Software Task Group has also developed fabric management, Remote Memory Access, and sockets applications which make use of these interfaces in user space. Intensive testing with these applications prompted the RapidIO subsystem updates provided within this set of patches. This patch (of 29): Replace default Ethernet-specific routine by the custom one to allow setting of larger MTU supported by RapidIO messaging (max RIO packet size is 4096 bytes). Signed-off-by:
Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by:
-
Aurelien Jacquiot authored
Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by:
-
Eric Biggers authored
Since commit cdfdef75 ("cpumask: only allocate nr_cpumask_bits."), this comment above cpumask_size() is no longer relevant. Signed-off-by:
Eric Biggers <ebiggers3@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jann Horn authored
This commit fixes the following security hole affecting systems where all of the following conditions are fulfilled: - The fs.suid_dumpable sysctl is set to 2. - The kernel.core_pattern sysctl's value starts with "/". (Systems where kernel.core_pattern starts with "|/" are not affected.) - Unprivileged user namespace creation is permitted. (This is true on Linux >=3.8, but some distributions disallow it by default using a distro patch.) Under these conditions, if a program executes under secure exec rules, causing it to run with the SUID_DUMP_ROOT flag, then unshares its user namespace, changes its root directory and crashes, the coredump will be written using fsuid=0 and a path derived from kernel.core_pattern - but this path is interpreted relative to the root directory of the process, allowing the attacker to control where a coredump will be written with root privileges. To fix the security issue, always interpret core_pattern for dumps that are written under SUID_DUMP_ROOT relative to the root directory of init. Signed-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Oleg Nesterov authored
This test-case (simplified version of generated by syzkaller) #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> void test(void) { for (;;) { if (fork()) { wait(NULL); continue; } ptrace(PTRACE_SEIZE, getppid(), 0, 0); ptrace(PTRACE_INTERRUPT, getppid(), 0, 0); _exit(0); } } int main(void) { int np; for (np = 0; np < 8; ++np) if (!fork()) test(); while (wait(NULL) > 0) ; return 0; } triggers the 2nd WARN_ON_ONCE(!signr) warning in do_jobctl_trap(). The problem is that __ptrace_unlink() clears task->jobctl under siglock but task->ptrace is cleared without this lock held; this fools the "else" branch which assumes that !PT_SEIZED means PT_PTRACED. Note also that most of other PTRACE_SEIZE checks can race with detach from the exiting tracer too. Say, the callers of ptrace_trap_notify() assume that SEIZED can't go away after it was checked. Signed-off-by:Oleg Nesterov <oleg@redhat.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: syzkaller <syzkaller@googlegroups.com> Signed-off-by:
-
Maciej S. Szmigiero authored
FAT has long supported its own default file name encoding config setting, separate from CONFIG_NLS_DEFAULT. However, if UTF-8 encoded file names are desired FAT character set should not be set to utf8 since this would make file names case sensitive even if case insensitive matching is requested. Instead, "utf8" mount options should be provided to enable UTF-8 file names in FAT file system. Unfortunately, there was no possibility to set the default value of this option so on UTF-8 system "utf8" mount option had to be added manually to most FAT mounts. This patch adds config option to set such default value. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Andy Lutomirski authored
x86's is_compat_task always checked the current syscall type, not the task type. It has no non-arch users any more, so just remove it to avoid confusion. On x86, nothing should really be checking the task ABI. There are legitimate users for the syscall ABI and for the mm ABI. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Andy Lutomirski authored
uhid changes the format expected in write() depending on bitness. It should check the syscall bitness directly. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andy Lutomirski authored
The input compat code should work like all other compat code: for 32-bit syscalls, use the 32-bit ABI and for 64-bit syscalls, use the 64-bit ABI. We have a helper for that (in_compat_syscall()): just use it. Signed-off-by:
-
Andy Lutomirski authored
amdkfd wants to know syscall type, not task type. Check directly. Unfortunately, amdkfd is making nasty assumptions that a process' bitness is a well-defined constant thing. This isn't the case on x86. I don't know how much this matters, but this patch has no effect on generated code on x86, so amdkfd is equally broken with and without this patch. Signed-off-by:
-
Andy Lutomirski authored
This should make no difference on any architecture, as x86's historical is_compat_task behavior really did check whether the calling syscall was a compat syscall. x86's is_compat_task is going away, though. Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Andy Lutomirski authored
Firewire was using is_compat_task to check whether it was in a compat ioctl or a non-compat ioctl. Use is_compat_syscall instead so it works properly on all architectures. Signed-off-by:
-
Andy Lutomirski authored
The code wants to prevent compat code from receiving messages. Use in_compat_syscall for this. Signed-off-by:
-
Andy Lutomirski authored
SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for 32-bit and 64-bit callers. Use in_compat_syscall to correctly distinguish them on all architectures. Signed-off-by:
-
Andy Lutomirski authored
ext4 treats directory offsets differently for 32-bit and 64-bit callers. Check the caller type using in_compat_syscall, not is_compat_task. This changes behavior on SPARC slightly. Signed-off-by:
-
Andy Lutomirski authored
AFAICT, lustre is trying to determine syscall bitness. Use the new accessor. Signed-off-by:
-
Andy Lutomirski authored
Except on SPARC, this is what the code always did. SPARC compat seccomp was buggy, although the impact of the bug was limited because SPARC 32-bit and 64-bit syscall numbers are the same. Signed-off-by:
-
Andy Lutomirski authored
Users of the 32-bit ptrace() ABI expect the full 32-bit ABI. siginfo translation should check ptrace() ABI, not caller task ABI. This is an ABI change on SPARC. Let's hope that no one relied on the old buggy ABI. Signed-off-by:
-
Andy Lutomirski authored
Seccomp wants to know the syscall bitness, not the caller task bitness, when it selects the syscall whitelist. As far as I know, this makes no difference on any architecture, so it's not a security problem. (It generates identical code everywhere except sparc, and, on sparc, the syscall numbering is the same for both ABIs.) Signed-off-by:
-
Andy Lutomirski authored
Sparc's syscall_get_arch was buggy: it returned the task arch, not the syscall arch. This could confuse seccomp and audit. I don't think this is as bad for seccomp as it looks: sparc's 32-bit and 64-bit syscalls are numbered the same. Signed-off-by:
-
Andy Lutomirski authored
On sparc64 compat-enabled kernels, any task can make 32-bit and 64-bit syscalls. is_compat_task returns true in 32-bit tasks, which does not necessarily imply that the current syscall is 32-bit. Provide an in_compat_syscall implementation that checks whether the current syscall is compat. As far as I know, sparc is the only architecture on which is_compat_task checks the compat status of the task and on which the compat status of a syscall can differ from the compat status of the task. On x86, is_compat_task checks the syscall type, not the task type. [akpm@linux-foundation.org: add comment, per Sam] [akpm@linux-foundation.org: update comment, per Andy] Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
A lot of code currently abuses is_compat_task to determine this. Signed-off-by:
-
Tetsuo Handa authored
When new timeout is written to /proc/sys/kernel/hung_task_timeout_secs, khungtaskd is interrupted and again sleeps for full timeout duration. This means that hang task will not be checked if new timeout is written periodically within old timeout duration and/or checking of hang task will be delayed for up to previous timeout duration. Fix this by remembering last time khungtaskd checked hang task. This change will allow other watchdog tasks (if any) to share khungtaskd by sleeping for minimal timeout diff of all watchdog tasks. Doing more watchdog tasks from khungtaskd will reduce the possibility of printk() collisions by multiple watchdog threads. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Signed-off-by:
-
Minchan Kim authored
Commit b430e9d1 ("remove compressed copy from zram in-memory") applied swap_slot_free_notify call in *end_swap_bio_read* to remove duplicated memory between zram and memory. However, with the introduction of rw_page in zram: 8c7f0102 ("zram: implement rw_page operation of zram"), it became void because rw_page doesn't need bio. Memory footprint is really important in embedded platforms which have small memory, for example, 512M) recently because it could start to kill processes if memory footprint exceeds some threshold by LMK or some similar memory management modules. This patch restores the function for rw_page, thereby eliminating this duplication. Signed-off-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: karam.lee <karam.lee@lge.com> Cc: <sangseok.lee@lge.com> Cc: Chan Jeong <chan.jeong@lge.com> Signed-off-by:
-
Gang He authored
This document will describe OCFS2 online file check feature. OCFS2 is often used in high-availaibility systems. However, OCFS2 usually converts the filesystem to read-only when encounters an error. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. Then, a mount option (errors=continue) is introduced, which would return the -EIO errno to the calling process and terminate furhter processing so that the filesystem is not corrupted further. The filesystem is not converted to read-only, and the problematic file's inode number is reported in the kernel log. The user can try to check/fix this file via online filecheck feature. Signed-off-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Gang He authored
Implement online check or fix inode block during reading a inode block to memory. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Gang He authored
Create online file check sysfile when ocfs2 mount, remove the related sysfile when ocfs2 umount. Signed-off-by:
-
Gang He authored
Implement online file check sysfile interfaces, e.g. how to create the related sysfile according to device name, how to display/handle file check request from the sysfile. Signed-off-by:
-
Gang He authored
When there are errors in the ocfs2 filesystem, they are usually accompanied by the inode number which caused the error. This inode number would be the input to fixing the file. One of these options could be considered: A file in the sys filesytem which would accept inode numbers. This could be used to communication back what has to be fixed or is fixed. You could write: $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/check or $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/fix Compare with second version, I re-design filecheck sysfs interfaces, there are three sysfs files (check, fix and set) under filecheck directory (see above), sysfs will accept only one argument <inode>. Second, I adjust some code in ocfs2_filecheck_repair_inode_block() function according to upstream feedback, we cannot just add VALID_FL flag back as a inode block fix, then we will not fix this field corruption currently until having a complete solution. Compare with first version, I use strncasecmp instead of double strncmp functions. Second, update the source file contribution vendor. This patch (of 4): Export ocfs2_kset object from ocfs2_stackglue kernel module, then online file check code will create the related sysfiles under ocfs2_kset object. We're exporting this because it's built in ocfs2_stackglue.ko. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "We have a good sized cleanup of our internal read ahead code, and the first series of commits from Chandan to enable PAGE_SIZE > sectorsize Otherwise, it's a normal series of cleanups and fixes, with many thanks to Dave Sterba for doing most of the patch wrangling this time" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (82 commits) btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums btrfs: Fix misspellings in comments. btrfs: Print Warning only if ENOSPC_DEBUG is enabled btrfs: scrub: silence an uninitialized variable warning btrfs: move btrfs_compression_type to compression.h btrfs: rename btrfs_print_info to btrfs_print_mod_info Btrfs: Show a warning message if one of objectid reaches its highest value Documentation: btrfs: remove usage specific information btrfs: use kbasename in btrfsic_mount Btrfs: do not collect ordered extents when logging that inode exists Btrfs: fix race when checking if we can skip fsync'ing an inode Btrfs: fix listxattrs not listing all xattrs packed in the same item Btrfs: fix deadlock between direct IO reads and buffered writes Btrfs: fix extent_same allowing destination offset beyond i_size Btrfs: fix file loss on log replay after renaming a file and fsync Btrfs: fix unreplayable log after snapshot delete + parent dir fsync Btrfs: fix lockdep deadlock warning due to dev_replace btrfs: drop unused argument in btrfs_ioctl_get_supported_features btrfs: add GET_SUPPORTED_FEATURES to the control device ioctls btrfs: change max_inline default to 2048 ...
-
- 21 Mar, 2016 8 commits
-
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Fix ABI regression of MMC BLK ioctl - Remove the unused MMC_DATA_STREAM flag - Enable asynchronous system PM for the host device - Minor fixes and clean-ups SDHCI host: Throughout the years, the numbers of SDHCI variants have increased and so has also the numbers of SDHCI callbacks/quirks. The purpose of these callbacks/quirks were to enable SDHCI to deal with variant specific requirements, but unfortunate this method didn't scale. Instead we have ended up with a mess. Not only did the code become suboptimal but also highly fragile. Lately many discussions of how to move forward with SDHCI has taken place at the MMC mailing list. Step by step, we aim to turn SDHCI's common code into a set of library functions. This will enable for optimizations and allow some of the existing callbacks and quirks to be removed, which also should help to make the code less fragile. Therefore I am also really pleased to announce that Adrian Hunter (Intel) has volunteered to step in as the maintainer for SDHCI. Future wise, I hope the community around SDHCI will continue to grow and that this release cycle can be the starting point of moving SDHCI into a better shape. As a matter of fact, already in this cycle the re-factoring has begun, but of course there are also fixes and new features included. Some highlights: - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP - sdhci-acpi: Add support for QCOM controllers - sdhci-pic32: Add new SDHCI variant for PIC32MZDA Other hosts: - atmel-mci: Fix a NULL pointer dereference - mediatek: Add SD write-protect support - mmc_spi: Fix card detect in GPIO case - tmio/sdhi: Add r8a7795 support - tmio/sdhi: Some fixes and clean-ups - dw_mmc: Add HW reset support - dw_mmc: Some fixes and clean-ups - sunxi: Add support for MMC DDR52 mode" * tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits) mmc: sdhci-of-at91: fix wake-up issue when using runtime pm mmc: sdhci-pci: Do not set DMA mask in enable_dma() mmc: sdhci-acpi: Remove enable_dma() hook mmc: sdhci: Set DMA mask when adding host mmc: block: fix ABI regression of mmc_blk_ioctl mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config mmc: core: remove redundant memset of sdio_read_cccr mmc: core: remove redundant memset of mmc_decode_cid mmc: of_mmc_spi: fix unused warning mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume Documentation: bindings: add description of phy for sdhci-of-arasan mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout mmc: mmci: Remove unnecessary header file mmc: sdhci-acpi: add QCOM controllers mmc: tegra: implement memcomp pad calibration mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch mmc: mediatek: Change signal voltage error to dev_dbg() mmc: sh_mmcif, tmio: Use ARCH_RENESAS ... -
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD updates from Shaohua Li: "This update mainly fixes bugs. - a raid5 discard related fix from Jes - a MD multipath bio clone fix from Ming - raid1 error handling deadlock fix from Nate and corresponding raid10 fix from myself - a raid5 stripe batch fix from Neil - a patch from Sebastian to avoid unnecessary uevent - several cleanup/debug patches" * tag 'md/4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: Cleanup cpu hotplug notifier raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang md: fix typos for stipe md/bitmap: remove redundant return in bitmap_checkpage md/raid1: remove unnecessary BUG_ON md: multipath: don't hardcopy bio in .make_request path md/raid5: output stripe state for debug md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_list Update MD git tree URL md/bitmap: remove redundant check MD: warn for potential deadlock md: Drop sending a change uevent when stopping RAID5: revert e9e4c377 to fix a livelock RAID5: check_reshape() shouldn't call mddev_suspend md/raid5: Compare apples to apples (or sectors to sectors) -
Linus Torvalds authored
I noticed this while merging the drm tree and checking for stragglers: the vsp1 driver still used dma_[alloc|free]_writecombine() that got renamed in commit f6e45661 ("dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()") I should have noticed back in the media merge (commit bace3db5), but better late than never. Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm[64] perf updates from Will Deacon: "I have another mixed bag of ARM-related perf patches here. It's about 25% CPU and 75% interconnect, but with drivers/bus/ languishing without an obvious maintainer or tree, Olof and I agreed to keep all of these PMU patches together. I suspect a whole load of code from drivers/bus/arm-* can be moved under drivers/perf/, so that's on the radar for the future. Summary: - Initial support for ARMv8.1 CPU PMUs - Support for the CPU PMU in Cavium ThunderX - CPU PMU support for systems running 32-bit Linux in secure mode - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits) drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC arm-cci: remove unused variable arm-cci: don't return value from void function arm-cci: make private functions static arm-cci: CoreLink CCI-550 PMU driver arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU arm-cci: CCI-500: Work around PMU counter writes arm-cci: Provide hook for writing to PMU counters arm-cci: Add helper to enable PMU without synchornising counters arm-cci: Add routines to save/restore all counters arm-cci: Get the status of a counter arm-cci: write_counter: Remove redundant check arm-cci: Delay PMU counter writes to pmu::pmu_enable arm-cci: Refactor CCI PMU enable/disable methods arm-cci: Group writes to counter arm-cci: fix handling cpumask_any_but return value arm-cci: simplify sysfs attr handling drivers/perf: arm_pmu: implement CPU_PM notifier arm64: dts: Add Cavium ThunderX specific PMU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC architecture updates from Vineet Gupta: - Big Endian io accessors fix [Lada] - Spellos fixes [Adam] - Fix for DW GMAC breakage [Alexey] - Making DMA API 64-bit ready - Shutting up -Wmaybe-uninitialized noise for ARC - Other minor fixes here and there, comments update * tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (21 commits) ARCv2: ioremap: Support dynamic peripheral address space ARC: dma: reintroduce platform specific dma<->phys ARC: dma: ioremap: use phys_addr_t consistenctly in code paths ARC: dma: pass_phys() not sg_virt() to cache ops ARC: dma: non-coherent pages need V-P mapping if in HIGHMEM ARC: dma: Use struct page based page allocator helpers ARC: build: Turn off -Wmaybe-uninitialized for ARC gcc 4.8 ARC: [plat-axs10x] add Ethernet PHY description in .dts arc: use of_platform_default_populate() to populate default bus ARC: thp: unbork !CONFIG_TRANSPARENT_HUGEPAGE build arc: [plat-nsimosci*] use ezchip network driver ARCv2: LLSC: software backoff is NOT needed starting HS2.1c ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern ARC: [plat-nsim] document ranges ARC: build: Better way to detect ISA compatible toolchain ARCv2: Allow enabling PAE40 w/o HIGHMEM ARC: [BE] readl()/writel() to work in Big Endian CPU configuration ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE ARC: [BE] Select correct CROSS_COMPILE prefix ARC: bitops: Remove non relevant comments ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF and quota updates from Jan Kara: "This contains a rewrite of UDF handling of filename encoding to fix remaining overflow issues from Andrew Gabbasov and quota changes to support new Q_[X]GETNEXTQUOTA quotactl for VFS quota formats" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix possible GPF due to uninitialised pointers ext4: Make Q_GETNEXTQUOTA work for quota in hidden inodes quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystem quota: Fix possible races during quota loading ocfs2: Implement get_next_id() quota_v2: Implement get_next_id() for V2 quota format quota: Add support for ->get_nextdqblk() for VFS quota udf: Merge linux specific translation into CS0 conversion function udf: Remove struct ustr as non-needed intermediate storage udf: Use separate buffer for copying split names udf: Adjust UDF_NAME_LEN to better reflect actual restrictions udf: Join functions for UTF8 and NLS conversions udf: Parameterize output length in udf_put_filename quota: Allow Q_GETQUOTA for frozen filesystem quota: Fixup comments about return value of Q_[X]GETNEXTQUOTA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs updates from Dave Chinner: "There's quite a lot in this request, and there's some cross-over with ext4, dax and quota code due to the nature of the changes being made. As for the rest of the XFS changes, there are lots of little things all over the place, which add up to a lot of changes in the end. The major changes are that we've reduced the size of the struct xfs_inode by ~100 bytes (gives an inode cache footprint reduction of >10%), the writepage code now only does a single set of mapping tree lockups so uses less CPU, delayed allocation reservations won't overrun under random write loads anymore, and we added compile time verification for on-disk structure sizes so we find out when a commit or platform/compiler change breaks the on disk structure as early as possible. Change summary: - error propagation for direct IO failures fixes for both XFS and ext4 - new quota interfaces and XFS implementation for iterating all the quota IDs in the filesystem - locking fixes for real-time device extent allocation - reduction of duplicate information in the xfs and vfs inode, saving roughly 100 bytes of memory per cached inode. - buffer flag cleanup - rework of the writepage code to use the generic write clustering mechanisms - several fixes for inode flag based DAX enablement - rework of remount option parsing - compile time verification of on-disk format structure sizes - delayed allocation reservation overrun fixes - lots of little error handling fixes - small memory leak fixes - enable xfsaild freezing again" * tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits) xfs: always set rvalp in xfs_dir2_node_trim_free xfs: ensure committed is initialized in xfs_trans_roll xfs: borrow indirect blocks from freed extent when available xfs: refactor delalloc indlen reservation split into helper xfs: update freeblocks counter after extent deletion xfs: debug mode forced buffered write failure xfs: remove impossible condition xfs: check sizes of XFS on-disk structures at compile time xfs: ioends require logically contiguous file offsets xfs: use named array initializers for log item dumping xfs: fix computation of inode btree maxlevels xfs: reinitialise per-AG structures if geometry changes during recovery xfs: remove xfs_trans_get_block_res xfs: fix up inode32/64 (re)mount handling xfs: fix format specifier , should be %llx and not %llu xfs: sanitize remount options xfs: convert mount option parsing to tokens xfs: fix two memory leaks in xfs_attr_list.c error paths xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared ...
-
