- 06 May, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2019-05-04 This series contains updates to i40e only. Grzegorz fixes a bug with promiscuous mode not being kept when the VF switched to a new VLAN. Fixed a typo in the link mode code, by using the correct define. Fixed truncation issue, which changed an function argument to a smaller value that should have been a larger value. Aleksandr adds support for new x710 devices and the speeds they support. Sergey adds a check for the number of vectors against the number of MSIx vectors to ensure one does not exceed the other. Martyna adds additional input validation on VF messages handled by the PF. Fixed potential memory leaks in the driver where the error paths were not freeing allocated memory. Maciej reverts the double ShadowRAM checksum calculation change because issues were found in the NVM downgrade situation. Gustavo Silva changes the i40e driver to use struct_size() in kzalloc() calls, to avoid type mistakes. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: =================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next, they are: 1) Move nft_expr_clone() to nft_dynset, from Paul Gortmaker. 2) Do not include module.h from net/netfilter/nf_tables.h, also from Paul. 3) Restrict conntrack sysctl entries to boolean, from Tonghao Zhang. 4) Several patches to add infrastructure to autoload NAT helper modules from their respective conntrack helper, this also includes the first client of this code in OVS, patches from Flavio Leitner. 5) Add support to match for conntrack ID, from Brett Mastbergen. 6) Spelling fix in connlabel, from Colin Ian King. 7) Use struct_size() from hashlimit, from Gustavo A. R. Silva. 8) Add optimized version of nf_inet_addr_mask(), from Li RongQing. =================== Signed-off-by:
-
- 05 May, 2019 38 commits
-
-
Li RongQing authored
using 64bit computation to slightly optimize nf_inet_addr_mask Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(struct xt_hashlimit_htable) + sizeof(struct hlist_head) * size with: struct_size(hinfo, hash, size) This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-05-05 Here's one more bluetooth-next pull request for 5.2: - Fixed Command Complete event handling check for matching opcode - Added support for Qualcomm WCN3998 controller, along with DT bindings - Added default address for Broadcom BCM2076B1 controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Heiner Kallweit authored
When testing I figured out that most operations signal finish even before we trigger the first delay. Seems like PCI(e) access and memory barriers typically add enough latency. Therefore move the first delay after the first check. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
phy_probe() takes care that all supported modes are advertised, in addition use phy_support_asym_pause() to advertise pause modes. This way we don't have to deal with phylib internals directly. Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/net/ethernet/xilinx/ll_temac_main.c:66:5: warning: symbol '_temac_ior_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:71:6: warning: symbol '_temac_iow_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:76:5: warning: symbol '_temac_ior_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:81:6: warning: symbol '_temac_iow_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:648:6: warning: symbol 'ptr_to_txbd' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:654:6: warning: symbol 'ptr_from_txbd' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_main.c:26:12: warning: symbol 'aq_ndev_driver_name' was not declared. Should it be static? Reported-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/netdevsim/bus.c:253:5: warning: symbol 'nsim_num_vf' was not declared. Should it be static? Reported-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c: In function 'mvpp2_cls_c2_build_match': drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1159:28: warning: variable 'act' set but not used [-Wunused-but-set-variable] It is never used since introduction in commit 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by:
-
Johannes Berg authored
Replace skb->xmit_more usage by netdev_xmit_more(). Fixes: 4f296ede ("drivers: net: aurora: use netdev_xmit_more helper") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== net: extend indirect calls helper usage This series applies the indirect calls helper introduced with commit 283c16a2 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") to more hooks inside the network stack. Overall this avoids up to 4 indirect calls for each RX packets, giving small but measurable gain TCP_RR workloads and 5% under UDP flood. ==================== Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect call per {send,recv}msg syscall in the common (IPv6 or IPv4 socket) case. Signed-off-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
So that we avoid another indirect call per RX packet, if early demux is enabled. Signed-off-by:
-
Paolo Abeni authored
So that we avoid another indirect call per RX packet in the common case. Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect call per RX IPv6/IPv4 packet. Note that we don't want to use the indirect calls helper for taps. Signed-off-by:
-
Matthias Kaehlcke authored
Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IBS_ENABLED. The constant represents a flag (multiple flags can be set at once), not a unique state of the controller or driver. Also make the flag an enum value instead of a pre-processor constant (more flags will be added to the enum group by another patch). Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Dan Carpenter authored
The "pdata->mdio_bus_id" is unsigned so this condition is always true. This patch just removes it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The phy_connect() function doesn't return NULL pointers. It returns error pointers on error, so I have updated the check. Fixes: 8425c41d ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by:
-
João Paulo Rechi Vita authored
This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by:João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
-
Stephan Gerhold authored
BCM2076B1 appears to use 20:76:A0:00:56:79 as default address. This address is used by at least 5 devices with the AMPAK AP6476 module and is also suspicious because it starts with the chip name 2076 (followed by a different revision A0 for some reason). Add it to the list of default addresses and leave it up to the user to configure a valid one. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Dan Carpenter authored
The code works fine but the problem is that check for negatives is a no-op: if (arg < 0) i = 0; The "i" value isn't used. We immediately overwrite it with: i = array_index_nospec(arg, MAX_LEC_ITF); The array_index_nospec() macro returns zero if "arg" is out of bounds so this works, but the dead code is confusing and it doesn't look very intentional. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 03f66f06 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Colin Ian King authored
The call to nla_nest_start_noflag can return null in the unlikely event that nla_put returns -EMSGSIZE. Check for this condition to avoid a null pointer dereference on pointer nla_reply. Addresses-Coverity: ("Dereference null return value") Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== ipv4: Move location of pcpu route cache and exceptions This series moves IPv4 pcpu cached routes from fib_nh to fib_nh_common to make the caches available for IPv6 nexthops (fib6_nh) with IPv4 routes. This allows a fib6_nh struct to be used with both IPv4 and and IPv6 routes. v4 - fixed memleak if encap_type is not set as noticed by Ido v3 - dropped ipv6 patches for now. Will resubmit those once the existing refcnt problem is fixed v2 - reverted patch 2 to use ifdef CONFIG_IP_ROUTE_CLASSID instead of IS_ENABLED(CONFIG_IP_ROUTE_CLASSID) to fix compile issues reported by kbuild test robot ==================== Signed-off-by: -
David Ahern authored
Similar to the cached routes, make IPv4 exceptions accessible when using an IPv6 nexthop struct with IPv4 routes. Simplify the exception functions by passing in fib_nh_common since that is all it needs, and then cleanup the call sites that have extraneous fib_nh conversions. As with the cached routes this is a change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David Ahern authored
Now that the cached routes are in fib_nh_common, pass it to rt_cache_route and simplify its callers. For rt_set_nexthop, the tclassid becomes the last user of fib_nh so move the container_of under the #ifdef CONFIG_IP_ROUTE_CLASSID. Signed-off-by:
-
David Ahern authored
While the cached routes, nh_pcpu_rth_output and nh_rth_input, are IPv4 specific, a later patch wants to make them accessible for IPv6 nexthops with IPv4 routes using a fib6_nh. Move the cached routes from fib_nh to fib_nh_common and update references. Initialization of the cached entries is moved to fib_nh_common_init, and free is moved to fib_nh_common_release. Change in location only, from fib_nh up to fib_nh_common; no functional change intended. Signed-off-by:
-
Martyna Szapar authored
Added freeing the old allocation of vf->qvlist_info in function i40e_config_iwarp_qvlist before overwriting it with the new allocation. Signed-off-by:
Martyna Szapar <martyna.szapar@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Martyna Szapar authored
Fixed possible memory leak in i40e_vc_add_cloud_filter function: cfilter is being allocated and in some error conditions the function returns without freeing the memory. Fix of integer truncation from u16 (type of queue_id value) to u8 when calling i40e_vc_isvalid_queue_id function. Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: -
Maciej Paczkowski authored
The reason of this revert is unexpected issue found in NVM Update tool during NVM image downgrade. The implementation is no longer needed since the QV tools are already aware of new FW double ShadowRAM dump mechanism. This patch reverts ShadowRAM checksum calculation change introduced in commit 9d12f0c4e436 ("i40e: Revert ShadowRAM checksum calculation change") Signed-off-by:Maciej Paczkowski <maciej.paczkowski@intel.com> Tested-by:
-
Martyna Szapar authored
Patch is adding missing input validation on VF message handling by the PF to the functions with opcodes: VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6 VIRTCHNL_OP_CONFIG_IRQ_MAP = 7, VIRTCHNL_OP_DISABLE_QUEUES = 9, VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14, Signed-off-by:
-
Aleksandr Loktionov authored
New device ids are created to support X710 backplane and SFP+ cards. This patch adds in i40e driver support for 2.5GbaseT and 5GbaseT speed. It's implemented by checking I40E_CAP_PHY_TYPE_2_5GBASE_T, I40E_CAP_PHY_TYPE_5GBASE_T bits from f/w and setting corresponding bits in ethtool link ksettings supported and advertising masks. Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
-
Grzegorz Siwik authored
In this patch fixed wrong truncation method from u16 to u8 during validation. It was changed by changing u8 to u32 parameter in method declaration and arguments were changed to u32. Signed-off-by:
Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by:
-
Sergey Nemov authored
Field num_vectors from struct virtchnl_iwarp_qvlist_info should not be larger than num_msix_vectors_vf in the hw struct. The iwarp uses the same set of vectors as the LAN VF driver. Signed-off-by:
Sergey Nemov <sergey.nemov@intel.com> Tested-by:
-
Grzegorz Siwik authored
This patch fixes the typo in I40E_CAP_PHY_TYPE mode link code. It was fixed by changing 40000baseLR4_Full to 40000baseKR4_Full Signed-off-by:
-
Grzegorz Siwik authored
This patch fixes a bug where changing VLAN to 0 was not set until VF restart. Now we are setting pvid info to 0 when we have to change VLAN to 0. Without this change when VF VLAN was changed to 0 nothing happened until VF restart. For changing to VLAN different than 0 it worked correctly. Signed-off-by:
-
