- 04 Oct, 2016 40 commits
-
-
Paul Burton authored
The MIPS Coherent Processing System (CPS) power management code has previously generated code used to enter low power idle states once during boot for all CPUs. This has the drawback that if a CPU is present in the system but not being used (for example due to the maxcpus kernel parameter) then we encounter problems due to not having probed that CPU for information about its type & properties. The result of this is that we generate entry code which is both unused, potentially entirely invalid & likely to be unsuitable for the CPU in question anyway. Avoid this by generating idle state entry code only when a CPU is brought online. This way we only ever generate code for CPUs that we know we've probed the properties of, and that will actually be used. [ralf@linux-mips.org: Resolve merge conflict.] Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14259/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. In this case, we did not need to add either to any files. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14036/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. We also needed to remove the no-op MODULE_DEVICE_TABLE usage in several instances to permit removal of the module.h include. The files in these instances were all controlled by bool Kconfig. In one instance, module_param was being used so we transition the module.h include onto a moduleparam.h include. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14035/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. The compiler.h additions are for an implict presence of the "notrace" which module.h brought in but export.h does not. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14034/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14033/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. In the case of the n32/o32 files, we have to get rid of a couple no-op MODULE_ tags to facilitate the module.h removal. They piggy back off the fs/ elf binary support, which is also a bool Kconfig. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14032/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
For the MIPS remote processor implementation, we need additional IPIs to talk to the remote processor. Since MIPS GIC reserves exactly the right number of IPI IRQs required by Linux for the number of VPs in the system, this is not possible without releasing some recources. This commit introduces mips_smp_ipi_allocate() which allocates IPIs to a given cpumask. It is called as normal with the cpu_possible_mask at bootup to initialise IPIs to all CPUs. mips_smp_ipi_free() may then be used to free IPIs to a subset of those CPUs so that their hardware resources can be reused. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lisa Parratt <Lisa.Parratt@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-remoteproc@vger.kernel.org Cc: lisa.parratt@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14285/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
When adding a wired entry to the TLB via add_wired_entry, the tlb is flushed with local_flush_tlb_all, which on CPUs with TLBINV results in the new wired entry being flushed again. Behavior of the TLBINV instruction applies to all applicable TLB entries and is unaffected by the setting of the Wired register. Therefore if the TLB has any wired entries, fall back to iterating over the entries rather than blasting them all using TLBINVF. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lisa.parratt@imgtec.com Cc: Hugh Dickins <hughd@google.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: David S. Miller <davem@davemloft.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14283/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
flush_icache_range() flushes icache lines in a protected fashion for kernel addresses, however this isn't correct with EVA where protected cache ops only operate on user addresses, making flush_icache_range() ineffective. Split the implementations of __flush_icache_user_range() from flush_icache_range(), changing the normal flush_icache_range() to use unprotected normal cache ops. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14156/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
Convert KVM dynamic translation of guest instructions to flush icache for guest mapped addresses using the new __local_flush_icache_user_range() API to allow the more generic flush_icache_range() to be changed to work on kernel addresses only. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14155/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
Update arch_uprobe_copy_ixol() to use the kmap_atomic() based kernel address to flush the icache with flush_icache_range(), rather than the user mapping. We have the kernel mapping available anyway and this avoids having to switch to using the new __flush_icache_user_range() for the sake of Enhanced Virtual Addressing (EVA) where flush_icache_range() will become ineffective on user addresses. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14154/ Patchwork: https://patchwork.linux-mips.org/patch/14308/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
The cacheflush(2) system call uses flush_icache_range() to flush a range of usermode addresses from the icache, so change it to utilise the new __flush_icache_user_range() API to allow the more generic flush_icache_range() to be changed to work on kernel addresses only. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14153/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
flush_icache_range() is used for both user addresses (i.e. cacheflush(2)), and kernel addresses (as the API documentation describes). This isn't really suitable however for Enhanced Virtual Addressing (EVA) where cache operations on usermode addresses must use a different instruction, and the protected cache ops assume user addresses, making flush_icache_range() ineffective on kernel addresses. Split out a new __flush_icache_user_range() and __local_flush_icache_user_range() for users which actually want to flush usermode addresses (note that flush_icache_user_range() already exists on various architectures but with different arguments). The implementation of flush_icache_range() will be changed in an upcoming commit to use unprotected normal cache ops so as to always work on the kernel mode address space. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14152/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
The EVA conditional bc_wback_inv() at the end of flush_icache_range() to flush the modified code all the way back to RAM was apparently there for debug purposes and to accommodate the Malta EVA configuration which makes use of a physical alias, and didn't use the CP0_EBase.WG (Write Gate) bit to put the exception vector in the same physical alias where the exception vector code is written and is being flushed. Now that CP0_EBase.WG is used, lets drop this flush. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14151/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
On CPUs which support the EBase WG (write gate) flag, the most significant bits of the exception base can be changed. Firmware running on a VP(E) using MIPS rproc may change EBase to point into the user segment where the firmware is located such that it can service interrupts. When control is transferred back to the kernel the EBase must be switched back into the kernel segment, such that the kernel's exception vectors are used. Similarly when vectored interrupts (vint) or vectored external interrupt controllers (veic) are enabled an exception vector is allocated from bootmem, and written to the EBase register. Due to the WG flag being clear, only bits 29:12 will be written. Asside from the rproc case above this is normally fine (as it will usually be a low allocation within the KSeg0 range, however when Enhanced Virtual Addressing (EVA) is enabled the allocation may be outside of the traditional KSeg0/KSeg1 address range, resulting in the wrong EBase being written. Correct both cases (configure_exception_vector() for the boot CPU, and per_cpu_trap_init() for secondary CPUs) to write EBase with the WG flag first if supported. On the Malta EVA configuration, KSeg0 is mapped to physical address 0, and memory is allocated from the KUSeg segment which is mapped to physical address 0x80000000, which physically aliases the RAM at 0. This only worked due to the exception base address aliasing the same underlying RAM that was written to & cache flushed, and due to flush_icache_range() going beyond the call of duty and flushing from the L2 cache too (due to the differing physical addresses). Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14150/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
When allocating boot memory for the exception vector when vectored interrupts (vint) or vectored external interrupt controllers (veic) are enabled, try to ensure that the virtual address resides in KSeg0 (and WARN should that not be possible). This will be helpful on MIPS64 cores supporting the CP0_EBase Write Gate (WG) bit once we start using the WG bit to write the full ebase into CP0_EBase, as we ideally need to avoid hitting the architecturally poorly defined exception base for Cache Errors when CP0_EBase is in XKPhys. An exception is made for Enhanced Virtual Addressing (EVA) kernels which allow segments to be rearranged and to become uncached during cache error handling, making it valid for ebase to be elsewhere. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14149/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
When reading the CP0_EBase register containing the WG (write gate) bit, the ebase variable should be set to the full value of the register, i.e. on a 64-bit kernel the full 64-bit width of the register via read_cp0_ebase_64(), and on a 32-bit kernel the full 32-bit width including bits 31:30 which may be writeable. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14148/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
This patch enables the MIPS CPS driver for MIPSr6 CPUs. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-mips@linux-mips.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14228/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
All calls to mips_cpc_lock_other should be wrapped in mips_cm_lock_other. This only matters if the system has CM3 and is using cpu idle, since otherwise a) the CPC lock is sufficent for CM < 3 and b) any systems with CM > 3 have not been able to use cpu idle until now. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/14227/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
MIPS CM3 changed the management of coherence. Instead of a coherence control register with a bitmask of coherent domains, CM3 simply has a coherence enable register with a single bit to enable coherence of the local core. Support this by clearing and setting this single bit to disable / enable coherence. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Tony Wu <tung7970@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14226/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
This patch adds support for CPUs implementing the MIPSr6 ISA to the CPS power management code. Three changes are necessary: 1. In MIPSr6, coupled coherence is necessary when CPUS implement multiple Virtual Processors (VPs). 2. MIPSr6 virtual processors are more like real cores and cannot yield to other VPs on the same core, so drop the MT ASE yield instruction. 3. To halt a MIPSr6 VP, the CPC VP_STOP register is used rather than the MT ASE TCHalt CP0 register. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14225/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
Instead of selecting an implementation or vendor specific sync type for the required sync operations, always use the architecturally mandated sync types which previous patches have put in place. The selection of special sync types is now redundant an can be removed. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14223/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
SYNC type 0 is defined in the MIPS architecture as a completion barrier where all loads/stores in the pipeline before the sync instruction must complete before any loads/stores subsequent to the sync instruction. In places where we require loads / stores be globally completed, use the standard completion sync stype. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14224/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
Since R2 of the MIPS architecture, SYNC(0x10) has been an optional but architecturally defined ordering barrier. If a CPU does not implement it, the arch specifies that it must fall back to SYNC(0). In places where we require that the instruction stream not be reordered, but do not require that loads / stores are gloablly completed, use the defined standard sync stype. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14221/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
Add the definitions of sync stype 0 (global completion barrier) and sync stype 0x10 (local ordering barrier) to barrier.h for use with the sync instruction. These types are defined by the MIPS Instruction Set since R2 of the architecture and are documented in document MD00087 table 6.5. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14222/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
This code makes large use of barriers, which had quite vague descriptions. Update the comments to make the choice of barrier and reason for it more clear. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14220/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
The check for whether a CPU required the FSB flush workaround previously required every CPU not requiring it to be whitelisted. That approach does not scale well as new CPUs are introduced so change the default from a WARN and returning an error to just returning 0. Any CPUs requiring the workaround can then be added to the blacklist. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14218/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
MIPS CM version 3 removed the CPC_CL_OTHER register and instead the CM_CL_OTHER register is used to redirect the CPC_OTHER region. As such, we should not write the unimplmented register and can avoid the spinlock as well. These lock functions should aleady be called within the context of a mips_cm_{lock,unlock}_other pair ensuring the correct CPC_OTHER region will be accessed. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14219/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
Checkpatch complains about use of bare unsigned type. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14217/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14250/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14249/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14248/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14206/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
PHY access through the board helper is impossible with the current drivers, so delete this code. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14205/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14204/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14203/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Leave that to actual ethernet/phy drivers. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14202/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Delete legacy hack for broken bootloaders. The warning has been in kernel for several years, and if there are still users using such bootloaders, they can fix the boot by supplying a proper DTB. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14201/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Masahiro Yamada authored
In many of clk_disable() implementations, it is a no-op for a NULL pointer input, but this is one of the exceptions. Making it treewide consistent will allow clock consumers to call clk_disable() without NULL pointer check. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-arm-kernel@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/14264/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-