- 16 Apr, 2014 2 commits
-
-
Hans Verkuil authored
The notify function is a void function, yet the v4l2_subdev_notify define uses it in a ? : construction, which causes sparse warnings. Replace the define by a static inline function and move it to v4l2-device.h, which is where it belongs since it needs to know the v4l2_device struct. This wasn't a problem when it was a define, but as a static inline function this no longer compiles in v4l2-subdev.h. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@gmail.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 15 Apr, 2014 11 commits
-
-
Robert Butora authored
This patch does not modify existing drivers. It adds subdriver to gspca for DTCS033 (Scopium) webcam for astrophotography. The patch adds dtcs033.c and modifies Kconfig and Makefile. Signed-off-by:
Robert Butora <robert.butora.fi@gmail.com> Signed-off-by:
-
Jean Delvare authored
The sn9c102 driver is deprecated. It was moved to staging in anticipation of its removal in a future kernel version. However, USB devices 0C45:6024 and 0C45:6025 are still handled by sn9c102 when both sn9c102 and gspca_sonixb are enabled. We must migrate all the users of these devices to the gspca_sonixb driver now, so that it gets sufficient testing before the sn9c102 driver is finally phased out. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Lad, Prabhakar authored
this patch makes sure that it terminates if any IO in progress and also makes sure that all the buffers are unmapped. It was observed that with several runs of application the application sometimes failed to allocate memory, This patch makes sure it all the buffers are released. Using kmemleak it was found that buffer were not released, this patch fixes following issue, echo scan > /sys/kernel/debug/kmemleak Kernel message reads: memleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) Then, cat /sys/kernel/debug/kmemleak unreferenced object 0xc564a480 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 00 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 unreferenced object 0xc564ac00 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 01 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 unreferenced object 0xc564a180 (size 192): comm "mttest", pid 764, jiffies 4294945880 (age 487.140s) hex dump (first 32 bytes): 02 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 Reported-by:Jimmy Ho <jimmygge@gmail.com> Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
from commit-id: b3379c62 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by:
-
Lad, Prabhakar authored
from commit-id: b3379c62 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by:
-
Lad, Prabhakar authored
from commit-id: b3379c62 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by:
-
Lad, Prabhakar authored
from commit-id: b3379c62 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6fe #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by:
-
Nicolas Dufresne authored
All YUV 422 has 16bit per pixels. Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Sylwester Nawrocki authored
This fixes following build error: CC drivers/media/i2c/s5c73m3/s5c73m3-core.o CC drivers/md/dm-ioctl.o CC net/ipv4/inet_lro.o drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘s5c73m3_get_platform_data’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:2: error: implicit declaration of function ‘v4l2_of_get_next_endpoint’ [-Werror=implicit-function-declaration] drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:10: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Antti Palosaari authored
It printed a little bit too heavy looking error log "DVB: Unable to find symbol rtl2832_sdr_attach()" when staging module was disabled. Silence that error by introducing own version of dvb_attach() macro without the error logging. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
RTL2832 SDR extension module is currently on staging. SDR module headers were included from staging causing direct dependency staging directory. As a solution, add needed headers to main driver. Motivation of that change comes from Luis / driver backports project. Reported-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Cc: backports@vger.kernel.org Signed-off-by:
-
- 14 Apr, 2014 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.15-rc1 * tag 'v3.15-rc1': (12180 commits) Linux 3.15-rc1 mm: Initialize error in shmem_file_aio_read() cifs: Use min_t() when comparing "size_t" and "unsigned long" sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue powerpc: Don't try to set LPCR unless we're in hypervisor mode futex: update documentation for ordering guarantees ceph: fix pr_fmt() redefinition vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" ...
-
- 13 Apr, 2014 12 commits
-
-
Linus Torvalds authored
-
Geert Uytterhoeven authored
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate -
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: "Here is the non-critical part of kbuild: - One bogus coccinelle check removed, one check fixed not to suggest the obsolete PTR_RET macro - scripts/tags.sh does not index the generated *.mod.c files - new objdiff tool to list differences between two versions of an object file - A fix for scripts/bootgraph.pl" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/coccinelle: Use PTR_ERR_OR_ZERO scripts/bootgraph.pl: Add graphic header scripts: objdiff: detect object code changes between two commits Coccicheck: Remove memcpy to struct assignment test scripts/tags.sh: Ignore *.mod.c -
Mikulas Patocka authored
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Paul Mackerras authored
Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Davidlohr Bueso authored
Commits 11d4616b ("futex: revert back to the explicit waiter counting code") and 69cd9eba ("futex: avoid race between requeue and wake") changed some of the finer details of how we think about futexes. One was a late fix and the other a consequence of overlooking the whole requeuing logic. The first change caused our documentation to be incorrect, and the second made us aware that we need to explicitly add more details to it. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ... -
Linus Torvalds authored
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
-
Linus Torvalds authored
Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc cleanups from Ohad Ben-Cohen: "Several remoteproc cleanup patches coming from Jingoo Han, Julia Lawall and Uwe Kleine-König" * tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc/ste_modem: staticize local symbols remoteproc/davinci: simplify use of devm_ioremap_resource remoteproc/davinci: drop needless devm_clk_put
-
git://git.linuxfoundation.org/llvmlinux/kernelLinus Torvalds authored
Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
-
- 12 Apr, 2014 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the target pending updates for v3.15-rc1. Apologies in advance for waiting until the second to last day of the merge window to send these out. The highlights this round include: - iser-target support for T10 PI (DIF) offloads (Sagi + Or) - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung) - Pass in transport supported PI at session initialization (Sagi + MKP + nab) - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi) - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab) - Fix tcm_fc use-after-free of ft_tpg (Andy Grover) - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn) Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI metadata into KVM guest have been left-out for now, as there where a few comments from MST + Paolo that where not able to be addressed in time for v3.15. Please expect this feature for v3.16-rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits) ib_srpt: Use correct ib_sg_dma primitives target/tcm_fc: Rename ft_tport_create to ft_tport_get target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn target/tcm_fc: Rename structs and list members for clarity target/tcm_fc: Limit to 1 TPG per wwn target/tcm_fc: Don't export ft_lport_list target/tcm_fc: Fix use-after-free of ft_tpg target: Add check to prevent Abort Task from aborting itself target: Enable READ_STRIP emulation in target_complete_ok_work target/sbc: Add sbc_dif_read_strip software emulation target: Enable WRITE_INSERT emulation in target_execute_cmd target/sbc: Add sbc_dif_generate software emulation target/sbc: Only expose PI read_cap16 bits when supported by fabric target/spc: Only expose PI mode page bits when supported by fabric target/spc: Only expose PI inquiry bits when supported by fabric target: Pass in transport supported PI at session initialization target/iblock: Fix double bioset_integrity_free bug Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist target/rd: T10-Dif: RAM disk is allocating more space than required. iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "A series of bug fix patches for v3.15-rc1. Most are just driver fixes. There are some changes at remote controller core level, fixing some definitions on a new API added for Kernel v3.15. It also adds the missing include at include/uapi/linux/v4l2-common.h, to allow its compilation on userspace, as pointed by you" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits) [media] gpsca: remove the risk of a division by zero [media] stk1160: warrant a NUL terminated string [media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers [media] v4l: ti-vpe: Set correct field parameter for output and capture buffers [media] v4l: ti-vpe: zero out reserved fields in try_fmt [media] v4l: ti-vpe: Fix initial configuration queue data [media] v4l: ti-vpe: Use correct bus_info name for the device in querycap [media] v4l: ti-vpe: report correct capabilities in querycap [media] v4l: ti-vpe: Allow usage of smaller images [media] v4l: ti-vpe: Use video_device_release_empty [media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs [media] lgdt3305: include sleep functionality in lgdt3304_ops [media] drx-j: use customise option correctly [media] m88rs2000: fix sparse static warnings [media] r820t: fix size and init values [media] rc-core: remove generic scancode filter [media] rc-core: split dev->s_filter [media] rc-core: do not change 32bit NEC scancode format for now [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03 [media] xc2028: add missing break to switch ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull PCIe non-transparent bridge fixes and features from Jon Mason: "NTB driver bug fixes to address issues in list traversal, skb leak in ntb_netdev, a typo, and a leak of msix entries in the error path. Clean ups of the event handling logic, as well as a overall style cleanup. Finally, the driver was converted to use the new pci_enable_msix_range logic (and the refactoring to go along with it)" * tag 'ntb-3.15' of git://github.com/jonmason/ntb: ntb: Use pci_enable_msix_range() instead of pci_enable_msix() ntb: Split ntb_setup_msix() into separate BWD/SNB routines ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs NTB: Code Style Clean-up NTB: client event cleanup ntb: Fix leakage of ntb_device::msix_entries[] array NTB: Fix typo in setting one translation register ntb_netdev: Fix skb free issue in open ntb_netdev: Fix list_for_each_entry exit issue
-
Linus Torvalds authored
The vfs merge caused a latent bug to show up: In file included from fs/ceph/super.h:4:0, from fs/ceph/ioctl.c:3: include/linux/ceph/ceph_debug.h:4:0: warning: "pr_fmt" redefined [enabled by default] #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ^ In file included from include/linux/kernel.h:13:0, from include/linux/uio.h:12, from include/linux/socket.h:7, from include/uapi/linux/in.h:22, from include/linux/in.h:23, from fs/ceph/ioctl.c:1: include/linux/printk.h:214:0: note: this is the location of the previous definition #define pr_fmt(fmt) fmt ^ where the reason is that <linux/ceph_debug.h> is included much too late for the "pr_fmt()" define. The include of <linux/ceph_debug.h> needs to be the first include in the file, but fs/ceph/ioctl.c had for some reason missed that, and it wasn't noticeable until some unrelated header file changes brought in an indirect earlier include of <linux/kernel.h>. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
-
David S. Miller authored
Nicolas Dichtel says: ==================== tunnels: don't allow to add the same tunnel twice This series fixes the check of an existing tunnel with the same parameters when a new tunnel is added. I've checked all users of ip_tunnel_newlink(): gre, gretap, ipip and vti. The bug exists only for gre and vti. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3 ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c5441932 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Vincenzo Maffione authored
This patch fixes the initialization of an array used in the TX datapath that was mistakenly initialized together with the RX datapath arrays. An out of range array access could happen when RX and TX rings had different sizes. Signed-off-by:
Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/netDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to e1000, e1000e, igb, igbvf, ixgb, ixgbe, ixgbevf and i40evf. Mark fixes an issue with ixgbe and ixgbevf by adding a bit to indicate when workqueues have been initialized. This permits the register read error handling from attempting to use them prior to that, which also generates warnings. Checking for a detected removal after initializing the work queues allows the probe function to return an error without getting the workqueue involved. Further, if the error_detected callback is entered before the workqueues are initialized, exit without recovery since the device initialization was so truncated. Francois Romieu provides several patches to all the drivers to remove the open coded skb_cow_head. Jakub Kicinski provides a fix for igb where last_rx_timestamp should be updated only when Rx time stamp is read. Mitch provides a fix for i40evf where a recent change broke the RSS LUT programming causing it to be programmed with all 0's. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
-
git://git.infradead.org/users/eparis/auditLinus Torvalds authored
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
-
Al Viro authored
that commit has fixed only the parts of that mess in fs/splice.c itself; there had been more in several other ->splice_read() instances... Signed-off-by: -
Al Viro authored
O_APPEND handling there hadn't been completely fixed by Pavel's patch; it checks the right value, but it's racy - we can't really do that until i_mutex has been taken. Fix by switching to __generic_file_aio_write() (open-coding generic_file_aio_write(), actually) and pulling mutex_lock() above inode_size_read(). Cc: stable@vger.kernel.org Signed-off-by:
-
