- 26 Feb, 2021 5 commits
-
-
Darren Powell authored
Modified Functions smu_set_xgmi_pstate() - modifed arg0 to match Powerplay API set_xgmi_pstate smu_mode2_reset() - modifed arg0 to match Powerplay API asic_reset_mode_2 smu_switch_power_profile() - modifed arg0 to match Powerplay API switch_power_profile smu_set_mp1_state() - modifed arg0 to match Powerplay API set_mp1_state smu_set_df_cstate() - modifed arg0 to match Powerplay API set_df_cstate smu_enable_mgpu_fan_boost() - modifed arg0 to match Powerplay API enable_mgpu_fan_boost Other Changes added above smu reset Powerplay functions to swsmu_dpm_funcs removed special smu handling of above functions and called through Powerplay API Signed-off-by:
Darren Powell <darren.powell@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Darren Powell authored
v2: updated the structure name to swsmu_pm_funcs Modified Functions smu_get_performance_level() - modifed arg0 to match Powerplay API get_performance_level Other Changes added a new structure swsmu_dpm_funcs to hold smu functions for Powerplay API removed special smu handling from amdgpu_get_power_dpm_force_performance_level Signed-off-by:
-
Changfeng authored
The value of max_me in amdgpu_gfx_rlc_setup_cp_table should reduce to 4 when mec2_fw is removed on asic renoir/arcturus. Or it will cause kernel NULL pointer when modprobe driver. Signed-off-by:
Changfeng <Changfeng.Zhu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Asher.Song authored
Navi12 0x7360/C7 SKU has no video support, so remove it. Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
Asher.Song <Asher.Song@amd.com> Signed-off-by:
-
Dennis Li authored
To ensure user has a constant of VRAM accessible in run-time, driver reserves limit backup pages when init, and return ones when bad pages retired, to keep no change of unused memory size. v2: refine codes to calculate badpags threshold Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
- 24 Feb, 2021 13 commits
-
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:79:40-45: WARNING: conversion to bool not needed here. ./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:81:40-45: WARNING: conversion to bool not needed here. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Souptick Joarder authored
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9804:38: >> warning: variable 'i' is uninitialized when used here >> [-Wuninitialized] timing = &edid->detailed_timings[i]; ^ drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9714:7: note: initialize the variable 'i' to silence this warning int i; ^ = 0 1 warning generated. Initialize the variable 'i'. Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Sonny Jiang authored
Because of dpg, the rptr/wptr need to be saved on fw shared memory, and restore them back in RBC_RB_RPTR/WPTR in kernel at power up. Signed-off-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Stylon Wang authored
This patch enables ASSR if display declares such support in DPCD. Signed-off-by:
Stylon Wang <stylon.wang@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
John Clements authored
disable mec2 fw bin loading and reference on unsupported ASIC Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Tao Zhou authored
Remove executable configuration for the file. Reported-by:
Ming Wang <wangming01@loongson.cn> Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Acked-by:
-
Prike Liang authored
In the shutdown and poweroff opt on the s0i3 system we still need un-gate the gfx clock gating and power gating before destory amdgpu device. Fixes: 628c36d7 ("drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1499Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1621:40-45: WARNING: conversion to bool not needed here. ./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1619:40-45: WARNING: conversion to bool not needed here. Reported-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:544:34-39: WARNING: conversion to bool not needed here. Reported-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c:900:47-52: WARNING: conversion to bool not needed here. Reviewed-by:
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:764:2: warning: variable 'structure_size' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:770:23: note: uninitialized use occurs here memset(header, 0xFF, structure_size); ^~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:753:25: note: initialize the variable 'structure_size' to silence this warning uint16_t structure_size; ^ = 0 1 warning generated. Return in the default case, as the size of the header will not be known. Fixes: de4b7cd8 ("drm/amd/pm/swsmu: unify the init soft gpu metrics function") Link: https://github.com/ClangBuiltLinux/linux/issues/1304Reviewed-by:Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Mario Kleiner authored
Spatial dithering to 10 bpc depth was disabled for all DCE's. Testing on DCE-8.3 and DCE-11.2 did not show any obvious ill effects, but a measureable precision improvement (via colorimeter) when displaying a fp16 framebuffer to a 10 bpc DP or HDMI connected HDR-10 monitor. v2: enable it for all DCEs (Alex) Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2) Signed-off-by:
-
Qingqing Zhuo authored
[Why] mutex_lock() was introduced in dm_disable_vblank(), which could be called in an IRQ context. Waiting in IRQ would cause issues like kernel lockup, etc. [How] Handle code that requires mutex lock on a different thread. v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex) v3: squash in warning fix (Wei) Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by:
Bindu Ramamurthy <bindu.r@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
- 22 Feb, 2021 16 commits
-
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Aric Cyr authored
[Why] No reason to have uninitialized var at top of function [How] Move it to minimum scope where it's actuallty used Signed-off-by:
-
Aric Cyr authored
[Why] There is a window of time where we optimize bandwidth due to no streams enabled will enable PSTATE changing but HUBPs are not disabled yet. This results in underflow counter increasing in some hotplug scenarios. [How] Set the optimize-bandwidth flag for later processing once all the HUBPs are properly disabled. Signed-off-by:
-
Vladimir Stempen authored
[why] Vendor based fan noise improvement [how] Report timing synchronizable when DP streams time frame difference is less than 0.05 percent. Adjust DP DTOs and sync displays using MASTER_UPDATE_LOCK_DB_X_Y Signed-off-by:
Vladimir Stempen <vladimir.stempen@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why & How] Move dmub trace buffer to uncached memory. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Eryk Brol authored
[why] This check for ASIC revision is no longer useful and causes lightup issues after a topology change in MST DSC scenario. In this case, DSC configs should be recalculated for the new topology. This check prevented that from happening on certain ASICs that do, in fact, support DSC. [how] Change the ASIC revision to instead check if DSC is supported. Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Acked-by:
-
Anthony Wang authored
[Why] Some external displays with DP can use seamless boot, but their audio endpoints are only enabled after hotplug. On boot, these displays inherit UEFI timings without properly initializing audio. [How] Enable display audio when seamless booting with an external monitor over DP. Signed-off-by:
Anthony Wang <anthony1.wang@amd.com> Acked-by:
-
Anthony Wang authored
[Why] Seamless boot over DP MST is not POR, but is not explicitly disabled. [How] Add check for DP MST and return false in dc_validate_seamless_boot_timing. Signed-off-by:
-
Stylon Wang authored
[Why] Debugfs entries being moved from DP/eDP only to be available on all connectors are cluttering the code. [How] Refactor the registration of these debugfs entries. Signed-off-by:
-
Eric Bernstein authored
[Why] In some cases, this function is called when DIG BE is not connected to DIG FE, in which case a value of zero isn't invalid and assert should not be hit. [How] Remove assert and handle ENGINE_ID_UNKNOWN result in calling function. Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Acked-by:
-
Rodrigo Siqueira authored
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by:
-
Nirmoy Das authored
Fixes: 62914a99 ("drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror") Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Felix Kuehling authored
If init_cwsr_apu fails, we currently leave the kfd_process structure in place anyway. The next kfd_open will then succeed, using the existing kfd_process structure. Fix that by cleaning up the kfd_process after a failure in init_cwsr_apu. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Philip Yang <philip.yang@amd.com> Signed-off-by:
-
Felix Kuehling authored
We use mmu_notifier_put to free the MMU notifier. That needs to be paired with mmu_notifier_get to work correctly. Othewrise the next patch would cause a kernel oops. Signed-off-by:
-
Anson Jacob authored
This reverts commit 8866a67a. Reason for revert: This breaks hotplug of HDMI on some systems, resulting in a blank screen. Caused general hangs on boot/hotplugs. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649Signed-off-by:
Anson Jacob <Anson.Jacob@amd.com> Reviewed-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by:
-
- 18 Feb, 2021 6 commits
-
-
Yang Li authored
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:8142:16-21: WARNING: conversion to bool not needed here Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Huang Rui authored
We should commit the value after restore them back to default as well. $ echo "r" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage Signed-off-by:
-
Aurabindo Pillai authored
New proposed sequence for HUBP blanking causes regressions where the hardware would fail to enter blank which triggers an assert in the new sequence. This change brings back the old sequence. Fixes: 985faf2c ("drm/amd/display: New sequence for HUBP blank") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Nirmoy Das authored
Mark amdgpu_ras_debugfs_create_ctrl_node() as static. Fixes: eb14235668777b ("drm/amdgpu: do not keep debugfs dentry") Reported-by: -
Aric Cyr authored
DC version 3.2.123 brings improvements in multiple areas. In summary, we highlight: - Firmware release 0.0.52 - Bug fixes on MPC OGAM sequence, display experience, etc. - Improvements on timing, transmitter control, etc. Signed-off-by:
-
Anthony Koo authored
[How] Add new aux cmd fields for acquire and release Signed-off-by:
-
