- 17 Dec, 2021 3 commits
-
-
Janis Schoetterl-Glausch authored
Introduce a helper function for guest frame access. Signed-off-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20211126164549.7046-4-scgl@linux.ibm.com> Signed-off-by:
-
Janis Schoetterl-Glausch authored
Do not round down the first address to the page boundary, just translate it normally, which gives the value we care about in the first place. Given this, translating a single address is just the special case of translating a range spanning a single page. Make the output optional, so the function can be used to just check a range. Signed-off-by:
-
Janis Schoetterl-Glausch authored
Improve readability by renaming the length variable and not calculating the offset manually. Signed-off-by:
-
- 07 Dec, 2021 1 commit
-
-
Janis Schoetterl-Glausch authored
They are defined in include/uapi/linux/kvm.h as KVM_S390_GET_SKEYS_NONE and KVM_S390_SKEYS_MAX, but the api documetation talks of KVM_S390_GET_KEYS_NONE and KVM_S390_SKEYS_ALLOC_MAX respectively. Signed-off-by:
-
- 21 Nov, 2021 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Move the command line preparation and the early command line parsing earlier so that the command line parameters which affect early_reserve_memory(), e.g. efi=nosftreserve, are taken into account. This was broken when the invocation of early_reserve_memory() was moved recently. - Use an atomic type for the SGX page accounting, which is read and written locklessly, to plug various race conditions related to it. * tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Fix free page accounting x86/boot: Pull up cmdline preparation and early param parsing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Thomas Gleixner: - Remove unneded PEBS disabling when taking LBR snapshots to prevent an unchecked MSR access error. - Fix IIO event constraints for Snowridge and Skylake server chips. * tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/perf: Fix snapshot_branch_stack warning in VM perf/x86/intel/uncore: Fix IIO event constraints for Snowridge perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull more powerpc fixes from Michael Ellerman: - Fix a bug in copying of sigset_t for 32-bit systems, which caused X to not start. - Fix handling of shared LSIs (rare) with the xive interrupt controller (Power9/10). - Fix missing TOC setup in some KVM code, which could result in oopses depending on kernel data layout. - Fix DMA mapping when we have persistent memory and only one DMA window available. - Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a recent fix. - A couple of other minor fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König. * tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xive: Change IRQ domain to a tree domain powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX powerpc/signal32: Fix sigset_t copy powerpc/book3e: Fix TLBCAM preset at boot powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window powerpc/pseries/ddw: simplify enable_ddw() powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory" powerpc/pseries: Fix numa FORM2 parsing fallback code powerpc/pseries: rename numa_dist_table to form2_distances powerpc: clean vdso32 and vdso64 directories powerpc/83xx/mpc8349emitx: Drop unused variable KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
-
Geert Uytterhoeven authored
On 32-bit: fs/pstore/blk.c: In function ‘__best_effort_init’: include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=] 5 | #define KERN_SOH "\001" /* ASCII Start Of Header */ | ^~~~~~ include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’ 14 | #define KERN_INFO KERN_SOH "6" /* informational */ | ^~~~~~~~ include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’ 373 | printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~~~ fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’ 314 | pr_info("attached %s (%zu) (no dedicated panic_write!)\n", | ^~~~~~~ Cc: stable@vger.kernel.org Fixes: 7bb9557b ("pstore/blk: Use the normal block device I/O path") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210629103700.1935012-1-geert@linux-m68k.org Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Nov, 2021 20 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 patches. Subsystems affected by this patch series: ipc, hexagon, mm (swap, slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: proc/vmcore: fix clearing user buffer by properly using clear_user() kmap_local: don't assume kmap PTEs are linear arrays in memory mm/damon/dbgfs: fix missed use of damon_dbgfs_lock mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation kasan: test: silence intentional read overflow warnings hugetlb, userfaultfd: fix reservation restore on userfaultfd error hugetlb: fix hugetlb cgroup refcounting during mremap mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag hexagon: ignore vmlinux.lds hexagon: clean up timer-regs.h hexagon: export raw I/O routines for modules mm: emit the "free" trace report before freeing memory in kmem_cache_free() shm: extend forced shm destroy to support objects from several IPC nses ipc: WARN if trying to remove ipc object which is absent mm/swap.c:put_pages_list(): reinitialise the page list
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Flip a cap check to avoid a selinux error (Alistair) - Fix for a regression this merge window where we can miss a queue ref put (me) - Un-mark pstore-blk as broken, as the condition that triggered that change has been rectified (Kees) - Queue quiesce and sync fixes (Ming) - FUA insertion fix (Ming) - blk-cgroup error path put fix (Yu) * tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block: blk-mq: don't insert FUA request with data into scheduler queue blk-cgroup: fix missing put device in error path from blkg_conf_pref() block: avoid to quiesce queue in elevator_init_mq Revert "mark pstore-blk as broken" blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() block: fix missing queue put in error path block: Check ADMIN before NICE for IOPRIO_CLASS_RT
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "There is an ACPI stubs fix which is ACKed by the ACPI maintainer for merging through my tree. One item stand out and that is that I delete the <linux/sdb.h> header that is used by nothing. I deleted this subsystem (through the GPIO tree) a while back so I feel responsible for tidying up the floor. Other than that it is the usual mistakes, a bit noisy around build issue and Kconfig then driver fixes. Specifics: - Fix some stubs causing compile issues for ACPI. - Fix some wakeups on AMD IRQs shared between GPIO and SCI. - Fix a build warning in the Tegra driver. - Fix a Kconfig issue in the Qualcomm driver. - Add a missing include the RALink driver. - Return a valid type for the Apple pinctrl IRQs. - Implement some Qualcomm SDM845 dual-edge errata. - Remove the unused <linux/sdb.h> header. (The subsystem was once deleted by the pinctrl maintainer...) - Fix a duplicate initialized in the Tegra driver. - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver" * tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sm8350: Correct UFS and SDC offsets pinctrl: tegra194: remove duplicate initializer again Remove unused header <linux/sdb.h> pinctrl: qcom: sdm845: Enable dual edge errata pinctrl: apple: Always return valid type in apple_gpio_irq_type pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c' pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group() pinctrl: amd: Fix wakeups when IRQ is shared with SCI ACPI: Add stubs for wakeup handler functions -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Heiko Carstens: - Add missing Kconfig option for ftrace direct multi sample, so it can be compiled again, and also add s390 support for this sample. - Update Christian Borntraeger's email address. - Various fixes for memory layout setup. Besides other this makes it possible to load shared DCSS segments again. - Fix copy to user space of swapped kdump oldmem. - Remove -mstack-guard and -mstack-size compile options when building vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and results in broken vdso code which causes more or less random exceptions. Also remove the not needed -nostdlib option. - Fix memory leak on cpu hotplug and return code handling in kexec code. - Wire up futex_waitv system call. - Replace snprintf with sysfs_emit where appropriate. * tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: ftrace/samples: add s390 support for ftrace direct multi sample ftrace/samples: add missing Kconfig option for ftrace direct multi sample MAINTAINERS: update email address of Christian Borntraeger s390/kexec: fix memory leak of ipl report buffer s390/kexec: fix return code handling s390/dump: fix copying to user-space of swapped kdump oldmem s390: wire up sys_futex_waitv system call s390/vdso: filter out -mstack-guard and -mstack-size s390/vdso: remove -nostdlib compiler flag s390: replace snprintf in show functions with sysfs_emit s390/boot: simplify and fix kernel memory layout setup s390/setup: re-arrange memblock setup s390/setup: avoid using memblock_enforce_memory_limit s390/setup: avoid reserving memory above identity mapping
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes: two to address minor coverity issues and one cleanup" * tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: introduce cifs_ses_mark_for_reconnect() helper cifs: protect srv_count with cifs_tcp_ses_lock cifs: move debug print out of spinlock
-
David Hildenbrand authored
To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com Fixes: 997c136f ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by:
Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Philipp Rudo <prudo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ard Biesheuvel authored
The kmap_local conversion broke the ARM architecture, because the new code assumes that all PTEs used for creating kmaps form a linear array in memory, and uses array indexing to look up the kmap PTE belonging to a certain kmap index. On ARM, this cannot work, not only because the PTE pages may be non-adjacent in memory, but also because ARM/!LPAE interleaves hardware entries and extended entries (carrying software-only bits) in a way that is not compatible with array indexing. Fortunately, this only seems to affect configurations with more than 8 CPUs, due to the way the per-CPU kmap slots are organized in memory. Work around this by permitting an architecture to set a Kconfig symbol that signifies that the kmap PTEs do not form a lineary array in memory, and so the only way to locate the appropriate one is to walk the page tables. Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/ Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org Fixes: 2a15ba82 ("ARM: highmem: Switch to generic kmap atomic") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reported-by:
Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
SeongJae Park authored
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and dbgfs_dirs using damon_dbgfs_lock. However, some of the code is accessing the variables without the protection. This fixes it by protecting all such accesses. Link: https://lkml.kernel.org/r/20211110145758.16558-3-sj@kernel.org Fixes: 75c1c2b5 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by:
SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
SeongJae Park authored
Patch series "DAMON fixes". This patch (of 2): DAMON users can trigger below warning in '__alloc_pages()' by invoking write() to some DAMON debugfs files with arbitrarily high count argument, because DAMON debugfs interface allocates some buffers based on the user-specified 'count'. if (unlikely(order >= MAX_ORDER)) { WARN_ON_ONCE(!(gfp & __GFP_NOWARN)); return NULL; } Because the DAMON debugfs interface code checks failure of the 'kmalloc()', this commit simply suppresses the warnings by adding '__GFP_NOWARN' flag. Link: https://lkml.kernel.org/r/20211110145758.16558-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211110145758.16558-2-sj@kernel.org Fixes: 4bc05954 ("mm/damon: implement a debugfs-based user space interface") Signed-off-by: -
Kees Cook authored
As done in commit d73dad4e ("kasan: test: bypass __alloc_size checks") for __write_overflow warnings, also silence some more cases that trip the __read_overflow warnings seen in 5.16-rc1[1]: In file included from include/linux/string.h:253, from include/linux/bitmap.h:10, from include/linux/cpumask.h:12, from include/linux/mm_types_task.h:14, from include/linux/mm_types.h:5, from include/linux/page-flags.h:13, from arch/arm64/include/asm/mte.h:14, from arch/arm64/include/asm/pgtable.h:12, from include/linux/pgtable.h:6, from include/linux/kasan.h:29, from lib/test_kasan.c:10: In function 'memcmp', inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2: include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter) 263 | __read_overflow(); | ^~~~~~~~~~~~~~~~~ In function 'memchr', inlined from 'kasan_memchr' at lib/test_kasan.c:872:2: include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter) 277 | __read_overflow(); | ^~~~~~~~~~~~~~~~~ [1] http://kisskb.ellerman.id.au/kisskb/buildresult/14660585/log/ Link: https://lkml.kernel.org/r/20211116004111.3171781-1-keescook@chromium.org Fixes: d73dad4e ("kasan: test: bypass __alloc_size checks") Signed-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Acked-by:
Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Mina Almasry authored
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we bail out using "goto out_release_unlock;" in the cases where idx >= size, or !huge_pte_none(), the code will detect that new_pagecache_page == false, and so call restore_reserve_on_error(). In this case I see restore_reserve_on_error() delete the reservation, and the following call to remove_inode_hugepages() will increment h->resv_hugepages causing a 100% reproducible leak. We should treat the is_continue case similar to adding a page into the pagecache and set new_pagecache_page to true, to indicate that there is no reservation to restore on the error path, and we need not call restore_reserve_on_error(). Rename new_pagecache_page to page_in_pagecache to make that clear. Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com Fixes: c7b1850d ("hugetlb: don't pass page cache pages to restore_reserve_on_error") Signed-off-by:
Mina Almasry <almasrymina@google.com> Reported-by:
James Houghton <jthoughton@google.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Wei Xu <weixugc@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bui Quang Minh authored
When hugetlb_vm_op_open() is called during copy_vma(), we may take the reference to resv_map->css. Later, when clearing the reservation pointer of old_vma after transferring it to new_vma, we forget to drop the reference to resv_map->css. This leads to a reference leak of css. Fixes this by adding a check to drop reservation css reference in clear_vma_resv_huge_pages() Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com Fixes: 550a7d60 ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by:
Bui Quang Minh <minhquangbui99@gmail.com> Reviewed-by:
-
Rustam Kovhaev authored
When kmemleak is enabled for SLOB, system does not boot and does not print anything to the console. At the very early stage in the boot process we hit infinite recursion from kmemleak_init() and eventually kernel crashes. kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not valid for SLOB. Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com Fixes: d8843922 ("slab: Ignore internal flags in cache creation") Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
After building allmodconfig, there is an untracked vmlinux.lds file in arch/hexagon/kernel: $ git ls-files . --exclude-standard --others arch/hexagon/kernel/vmlinux.lds Ignore it as all other architectures have. Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.orgSigned-off-by:Nathan Chancellor <nathan@kernel.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Nathan Chancellor authored
When building allmodconfig, there is a warning about TIMER_ENABLE being redefined: drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined] #define TIMER_ENABLE BIT(7) ^ arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here #define TIMER_ENABLE 0 ^ 1 error generated. The values in this header are only used in one file each, if they are used at all. Remove the header and sink all of the constants into their respective files. TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in arch/hexagon/kernel/time.c. SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the file's introduction in commit 71e4a47f ("Hexagon: Add time and timer functions"). TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the definition, rather than its use. Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.orgSigned-off-by:Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
Patch series "Fixes for ARCH=hexagon allmodconfig", v2. This series fixes some issues noticed with ARCH=hexagon allmodconfig. This patch (of 3): When building ARCH=hexagon allmodconfig, the following errors occur: ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! Export these symbols so that modules can use them without any errors. Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org Fixes: 013bf24c ("Hexagon: Provide basic implementation and/or stubs for I/O routines.") Signed-off-by:
-
Yunfeng Ye authored
After the memory is freed, it can be immediately allocated by other CPUs, before the "free" trace report has been emitted. This causes inaccurate traces. For example, if the following sequence of events occurs: CPU 0 CPU 1 (1) alloc xxxxxx (2) free xxxxxx (3) alloc xxxxxx (4) free xxxxxx Then they will be inaccurately reported via tracing, so that they appear to have happened in this order: CPU 0 CPU 1 (1) alloc xxxxxx (2) alloc xxxxxx (3) free xxxxxx (4) free xxxxxx This makes it look like CPU 1 somehow managed to allocate memory that CPU 0 still had allocated for itself. In order to avoid this, emit the "free xxxxxx" tracing report just before the actual call to free the memory, instead of just after it. Link: https://lkml.kernel.org/r/374eb75d-7404-8721-4e1e-65b0e5b17279@huawei.comSigned-off-by:Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Alexander Mikhalitsyn authored
Currently, the exit_shm() function not designed to work properly when task->sysvshm.shm_clist holds shm objects from different IPC namespaces. This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it leads to use-after-free (reproducer exists). This is an attempt to fix the problem by extending exit_shm mechanism to handle shm's destroy from several IPC ns'es. To achieve that we do several things: 1. add a namespace (non-refcounted) pointer to the struct shmid_kernel 2. during new shm object creation (newseg()/shmget syscall) we initialize this pointer by current task IPC ns 3. exit_shm() fully reworked such that it traverses over all shp's in task->sysvshm.shm_clist and gets IPC namespace not from current task as it was before but from shp's object itself, then call shm_destroy(shp, ns). Note: We need to be really careful here, because as it was said before (1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we using special helper get_ipc_ns_not_zero() which allows to get IPC ns refcounter only if IPC ns not in the "state of destruction". Q/A Q: Why can we access shp->ns memory using non-refcounted pointer? A: Because shp object lifetime is always shorther than IPC namespace lifetime, so, if we get shp object from the task->sysvshm.shm_clist while holding task_lock(task) nobody can steal our namespace. Q: Does this patch change semantics of unshare/setns/clone syscalls? A: No. It's just fixes non-covered case when process may leave IPC namespace without getting task->sysvshm.shm_clist list cleaned up. Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: ab602f79 ("shm: make exit_shm work proportional to task activity") Co-developed-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alexander Mikhalitsyn authored
Patch series "shm: shm_rmid_forced feature fixes". Some time ago I met kernel crash after CRIU restore procedure, fortunately, it was CRIU restore, so, I had dump files and could do restore many times and crash reproduced easily. After some investigation I've constructed the minimal reproducer. It was found that it's use-after-free and it happens only if sysctl kernel.shm_rmid_forced = 1. The key of the problem is that the exit_shm() function not handles shp's object destroy when task->sysvshm.shm_clist contains items from different IPC namespaces. In most cases this list will contain only items from one IPC namespace. How can this list contain object from different namespaces? The exit_shm() function is designed to clean up this list always when process leaves IPC namespace. But we made a mistake a long time ago and did not add a exit_shm() call into the setns() syscall procedures. The first idea was just to add this call to setns() syscall but it obviously changes semantics of setns() syscall and that's userspace-visible change. So, I gave up on this idea. The first real attempt to address the issue was just to omit forced destroy if we meet shp object not from current task IPC namespace [1]. But that was not the best idea because task->sysvshm.shm_clist was protected by rwsem which belongs to current task IPC namespace. It means that list corruption may occur. Second approach is just extend exit_shm() to properly handle shp's from different IPC namespaces [2]. This is really non-trivial thing, I've put a lot of effort into that but not believed that it's possible to make it fully safe, clean and clear. Thanks to the efforts of Manfred Spraul working an elegant solution was designed. Thanks a lot, Manfred! Eric also suggested the way to address the issue in ("[RFC][PATCH] shm: In shm_exit destroy all created and never attached segments") Eric's idea was to maintain a list of shm_clists one per IPC namespace, use lock-less lists. But there is some extra memory consumption-related concerns. An alternative solution which was suggested by me was implemented in ("shm: reset shm_clist on setns but omit forced shm destroy"). The idea is pretty simple, we add exit_shm() syscall to setns() but DO NOT destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just clean up the task->sysvshm.shm_clist list. This chages semantics of setns() syscall a little bit but in comparision to the "naive" solution when we just add exit_shm() without any special exclusions this looks like a safer option. [1] https://lkml.org/lkml/2021/7/6/1108 [2] https://lkml.org/lkml/2021/7/14/736 This patch (of 2): Let's produce a warning if we trying to remove non-existing IPC object from IPC namespace kht/idr structures. This allows us to catch possible bugs when the ipc_rmid() function was called with inconsistent struct ipc_ids*, struct kern_ipc_perm* arguments. Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.comCo-developed-by: -
Matthew Wilcox authored
While free_unref_page_list() puts pages onto the CPU local LRU list, it does not remove them from the list they were passed in on. That makes the list_head appear to be non-empty, and would lead to various corruption problems if we didn't have an assertion that the list was empty. Reinitialise the list after calling free_unref_page_list() to avoid this problem. Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org Fixes: 988c69f1 ("mm: optimise put_pages_list()") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Steve French <stfrench@microsoft.com> Reported-by:
Namjae Jeon <linkinjeon@kernel.org> Tested-by:
-
- 19 Nov, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull libata fixes from Damien Le Moal: - Prevent accesses to unsupported log pages as that causes device scan failures with LLDDs using libsas (from me). - A couple of fixes for AMD AHCI adapters handling of low power modes and resume (from Mario). - Fix a compilation warning (from me). * tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-sata: Declare ata_ncq_sdev_attrs static ata: libahci: Adjust behavior when StorageD3Enable _DSD is set ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile ata: libata: add missing ata_identify_page_supported() calls ata: libata: improve ata_read_log_page() error message
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix double free in destroy_hist_field - Harden memset() of trace_iterator structure - Do not warn in trace printk check when test buffer fills up * tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Don't use out-of-sync va_list in event printing tracing: Use memset_startat() to zero struct trace_iterator tracing/histogram: Fix UAF in destroy_hist_field()
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the 'local_weight', 'weight' (memory access latency), 'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc' (pipeline stage cycles) sort key sample aggregation. - Fix 'perf test' entry for watchpoints on s/390. - Fix branch_stack entry endianness check in the 'perf test' sample parsing test. - Fix ARM SPE handling on 'perf inject'. - Fix memory leaks detected with ASan. - Fix build on arm64 related to reallocarray() availability. - Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable (futex_waitv). * tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf evsel: Fix memory leaks relating to unit perf report: Fix memory leaks around perf_tip() perf hist: Fix memory leak of a perf_hpp_fmt tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall tools build: Fix removal of feature-sync-compare-and-swap feature detection perf inject: Fix ARM SPE handling perf bench: Fix two memory leaks detected with ASan perf test sample-parsing: Fix branch_stack entry endianness check tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf sort: Fix the 'p_stage_cyc' sort key behavior perf sort: Fix the 'ins_lat' sort key behavior perf sort: Fix the 'weight' sort key behavior perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1 perf tests wp: Remove unused functions on s390 tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers cpufeatures: Sync with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "I have two patches for 5.16: - allow external modules to be built against read-only source trees - turn KVM on in the defconfigs The second one isn't technically a fix, but it got tied up pending some defconfig cleanups that ended up finding some larger issues. I figured it'd be better to get the config changes some more testing, but didn't want to hold up turning KVM on for that" * tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix building external modules RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
-
Linus Torvalds authored
Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit-vs-signal handling fixes from Eric Biederman: "This is a small set of changes where debuggers were no longer able to intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit cleanups. This is essentially the change you suggested with all of i's dotted and the t's crossed so that ptrace can intercept all of the cases it has been able to intercept the past, and all of the cases that made it to exit without giving ptrace a chance still don't give ptrace a chance" * 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Replace force_fatal_sig with force_exit_sig when in doubt signal: Don't always set SA_IMMUTABLE for forced signals
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change to fix a regression in user space device state setting, which is used by the iscsi daemons to effect device recovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id() scsi: ufs: core: Fix another task management completion race scsi: ufs: core: Fix task management completion timeout race scsi: core: sysfs: Fix hang when device state is set via sysfs scsi: iscsi: Unblock session then wake up error handler scsi: ufs: core: Improve SCSI abort handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "There are a few big regression items from the merge window suggesting that people are testing rc1's but not testing the for-next branches: - Warnings fixes - Crash in hf1 when creating QPs and setting counters - Some old mlx4 cards fail to probe due to missing counters - Syzkaller crash in the new counters code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: Update for VMware PVRDMA driver RDMA/nldev: Check stat attribute before accessing it RDMA/mlx4: Do not fail the registration on port stats IB/hfi1: Properly allocate rdma counter desc memory RDMA/core: Set send and receive CQ before forwarding to the driver RDMA/netlink: Add __maybe_unused to static inline in C file
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a coccicheck warning in gpio-virtio - fix gpio selftests build issues - fix a Kconfig issue in gpio-rockchip * tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors selftests: gpio: restore CFLAGS options selftests: gpio: fix uninitialised variable warning selftests: gpio: fix gpio compiling error gpio: virtio: remove unneeded semicolon
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This week's fixes, pretty quiet, about right for rc2. amdgpu is the bulk of them but the scheduler ones have been reported in a few places I think. Otherwise just some minor i915 fixes and a few other scattered around: scheduler: - two refcounting fixes cma-helper: - use correct free path for noncoherent efifb: - probing fix amdgpu: - Better debugging info for SMU msgs - Better error reporting when adding IP blocks - Fix UVD powergating regression on CZ - Clock reporting fix for navi1x - OLED panel backlight fix - Fix scaling on VGA/DVI for non-DC display code - Fix GLFCLK handling for RGP on some APUs - fix potential memory leak amdkfd: - GPU reset fix i915: - return error handling fix - ADL-P display fix - TGL DSI display clocks fix nouveau: - infoframe corruption fix sun4i: - Kconfig fix" * tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/amdgpu: fix potential memleak drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors drm/amd/display: Fix OLED brightness control on eDP drm/amd/pm: Remove artificial freq level on Navi1x drm/amd/pm: avoid duplicate powergate/ungate setting drm/amdgpu: add error print when failing to add IP block(v2) drm/amd/pm: Enhanced reporting also for a stuck command drm/i915/guc: fix NULL vs IS_ERR() checking drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping" fbdev: Prevent probing generic drivers if a FB is already registered drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder drm/scheduler: fix drm_sched_job_add_implicit_dependencies drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY drm/cma-helper: Release non-coherent memory with dma_free_noncoherent() drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
-
Peter Zijlstra authored
When commit 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE") moved from stacktrace to native unwind_*() usage, the try_get_task_stack() got lost, leading to use-after-free issues for dying tasks. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Fixes: 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031 Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/Reported-by:
Justin Forbes <jmforbes@linuxtx.org> Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Eric W. Biederman authored
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by:
Kyle Huey <me@kylehuey.com> Reported-by:
kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da2 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27a ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d6 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5b ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.orgReviewed-by:
Kyle Huey <khuey@kylehuey.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
