- 09 Jan, 2020 6 commits
-
-
Adam Ludkiewicz authored
The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by:
Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Stefan Assmann authored
Currently MAC filters are not altered during a VF reset event. This may lead to a stale filter when an administratively set MAC is forced by the PF. For an administratively set MAC the PF driver deletes the VFs filters, overwrites the VFs MAC address and triggers a VF reset. However the VF driver itself is not aware of the filter removal, which is what the VF reset is for. The VF reset queues all filters present in the VF driver to be re-added to the PF filter list (including the filter for the now stale VF MAC address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which provides the new MAC address to the VF. When this happens i40e will complain and reject the stale MAC filter, at least in the untrusted VF case. i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0 iavf 0000:08:02.0: Reset warning received from the PF iavf 0000:08:02.0: Scheduling reset task i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective. i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1 iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM To avoid re-adding the stale MAC filter it needs to be removed from the VF driver's filter list before queuing the existing filters. Then during the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be added again, at which point the MAC address has been updated. As a bonus this change makes bringing the VF down and up again superfluous for the administratively set MAC case. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Manfred Rudigier authored
Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Cambda Zhu authored
This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Tested-by:
-
Radoslaw Tyl authored
Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Brett Creeley authored
Currently in i40e_vc_disable_queues_msg() we are incorrectly validating the virtchnl queue select bitmaps. The virtchnl_queue_select rx_queues and tx_queue bitmap is being compared against ICE_MAX_VF_QUEUES, but the problem is that these bitmaps can have a value greater than I40E_MAX_VF_QUEUES. Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see if both virtchnl_queue_select bitmaps are empty along with checking that the bitmaps only have valid bits set. This function can then be used in both the queue enable and disable flows. Suggested-by:
Arkady Gilinksky <arkady.gilinsky@harmonicinc.com> Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
- 08 Jan, 2020 17 commits
-
-
Tuong Lien authored
The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tuong Lien authored
When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netns context in arp_tables, from Florian Westphal. 2) Underflow in flowtable reference counter, from wenxu. 3) Fix incorrect ethernet destination address in flowtable offload, from wenxu. 4) Check for status of neighbour entry, from wenxu. 5) Fix NAT port mangling, from wenxu. 6) Unbind callbacks from destroy path to cleanup hardware properly on flowtable removal. 7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp and use it. 8) NULL pointer exception when timeout argument is null in conntrack dccp and sctp protocol helpers, from Florian Westphal. 9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from Florian. ==================== Signed-off-by: -
Florian Westphal authored
The set uadt functions assume lineno is never NULL, but it is in case of ip_set_utest(). syzkaller managed to generate a netlink message that calls this with LINENO attr present: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104 Call Trace: ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563 pass a dummy lineno storage, its easier than patching all set implementations. This seems to be a day-0 bug. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
The timeout pointer can be NULL which means we should modify the per-nets timeout instead. All do this, except sctp and dccp which instead give: general protection fault: 0000 [#1] PREEMPT SMP KASAN net/netfilter/nf_conntrack_proto_dccp.c:682 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection") Signed-off-by:
-
Arnd Bergmann authored
With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances: drivers/atm/eni.c: In function 'discard': drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized] writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4); ^ drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized] Change the code to always write zeroes instead. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Eric Dumazet authored
Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff6 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff6 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7 ("[NET]: Add macvlan driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== When ungrafting from PRIO, replace child with FIFO When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting that band gets dropped. That is incorrect--no Qdisc was explicitly added when PRIO was created, and after removal, none should have to be added either. In patch #2, this problem is fixed for PRIO by first attempting to create a default Qdisc and only falling back to noop when that fails. This pattern of attempting to create an invisible FIFO, using NOOP only as a fallback, is also seen in some other Qdiscs. The only driver currently offloading PRIO (and thus presumably the only one impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the replacement by an invisible FIFO gracefully. ==================== Signed-off-by: -
Petr Machata authored
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting that band gets dropped. That is incorrect--no Qdisc was explicitly added when PRIO was created, and after removal, none should have to be added either. Fix PRIO by first attempting to create a default Qdisc and only falling back to noop when that fails. This pattern of attempting to create an invisible FIFO, using NOOP only as a fallback, is also seen in other Qdiscs. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Petr Machata authored
The following patch will change PRIO to replace a removed Qdisc with an invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the graft message that is generated. But because FIFO does not issue its own REPLACE message, when the graft operation takes place, the Qdisc that mlxsw tracks under the indicated band is still the old one. The child handle (0:0) therefore does not match, and mlxsw rejects the graft operation, which leads to an extack message: Warning: Offloading graft operation failed. Fix by ignoring the invisible children in the PRIO graft handler. The DESTROY message of the removed Qdisc is going to follow shortly and handle the removal. Fixes: 32dc5efc ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: -
Niklas Cassel authored
As I am no longer with Linaro, I no longer have access to documentation for this IP. The Linaro email will start bouncing soon. Vinod is fully capable to maintain this driver by himself, therefore remove myself as co-maintainer for qcom-ethqos. Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by:
-
Eric Dumazet authored
WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e ("gtp: fix suspicious RCU usage") Signed-off-by: -
Eric Dumazet authored
As diagnosed by Florian : If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue() can loop forever in : if (f->credit <= 0) { f->credit += q->quantum; goto begin; } ... because f->credit is either 0 or -2147483648. Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 : This max value should limit risks of breaking user setups while fixing this bug. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: -
Masahiro Yamada authored
There is no module named tipc_diag. The assignment to tipc_diag-y has no effect. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
net/tipc/Makefile adds socket.o twice. tipc-y += addr.o bcast.o bearer.o \ core.o link.o discover.o msg.o \ name_distr.o subscr.o monitor.o name_table.o net.o \ netlink.o netlink_compat.o node.o socket.o eth_media.o \ ^^^^^^^^ topsrv.o socket.o group.o trace.o ^^^^^^^^ Signed-off-by: -
Chen-Yu Tsai authored
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chen-Yu Tsai authored
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by:
-
- 07 Jan, 2020 8 commits
-
-
Eric Dumazet authored
If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by:
-
Jose Abreu authored
When using fixed link we don't need the MDIO bus support. Reported-by:
Heiko Stuebner <heiko@sntech.de> Reported-by:
kernelci.org bot <bot@kernelci.org> Fixes: d3e014ec ("net: stmmac: platform: Fix MDIO init for platforms without PHY") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Acked-by:
Sriram Dash <Sriram.dash@samsung.com> Tested-by:
Patrice Chotard <patrice.chotard@st.com> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch). Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== vlan: rtnetlink newlink fixes First patch fixes a potential memory leak found by syzbot Second patch makes vlan_changelink() aware of errors and report them to user. ==================== Signed-off-by: -
Eric Dumazet authored
Both vlan_dev_change_flags() and vlan_dev_set_egress_priority() can return an error. vlan_changelink() should not ignore them. Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
-
Eric Dumazet authored
There are few cases where the ndo_uninit() handler might be not called if an error happens while device is initialized. Since vlan_newlink() calls vlan_changelink() before trying to register the netdevice, we need to make sure vlan_dev_uninit() has been called at least once, or we might leak allocated memory. BUG: memory leak unreferenced object 0xffff888122a206c0 (size 32): comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00 ......as........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline] [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline] [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline] [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194 [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126 [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181 [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305 [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363 [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline] [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixe: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-01-07 The following pull-request contains BPF updates for your *net* tree. We've added 2 non-merge commits during the last 1 day(s) which contain a total of 2 files changed, 16 insertions(+), 4 deletions(-). The main changes are: 1) Fix a use-after-free in cgroup BPF due to auto-detachment, from Roman Gushchin. 2) Fix skb out-of-bounds access in ld_abs/ind instruction, from Daniel Borkmann. ==================== Signed-off-by: -
Jiping Ma authored
Add one notifier for udev changes net device name. Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename") Signed-off-by:Jiping Ma <jiping.ma2@windriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-01-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.3 ('net/mlx5: Move devlink registration before interfaces load') For -stable v5.4 ('net/mlx5e: Fix hairpin RSS table size') ('net/mlx5: DR, Init lists that are used in rule's member') ('net/mlx5e: Always print health reporter message to dmesg') ('net/mlx5: DR, No need for atomic refcount for internal SW steering resources') ==================== Signed-off-by:
-
- 06 Jan, 2020 9 commits
-
-
Erez Shitrit authored
Whenever adding new member of rule object we attach it to 2 lists, These 2 lists should be initialized first. Fixes: 41d07074 ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eli Cohen authored
Set hairpin table size to the corret size, based on the groups that would be created in it. Groups are laid out on the table such that a group occupies a range of entries in the table. This implies that the group ranges should have correspondence to the table they are laid upon. The patch cited below made group 1's size to grow hence causing overflow of group range laid on the table. Fixes: a795d8db ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Yevgeny Kliteynik authored
No need for an atomic refcounter for the STE and hashtables. These are internal SW steering resources and they are always under domain mutex. This also fixes the following refcount error: refcount_t: addition on 0; use-after-free. WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0 Call Trace: dr_table_init_nic+0x10d/0x110 [mlx5_core] mlx5dr_table_create+0xb4/0x230 [mlx5_core] mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core] __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core] esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core] ... Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by:
Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Parav Pandit authored
This reverts commit 7dee607e. During cleanup path, FTE's parent node group is removed which is referenced by the FTE while freeing the FTE. Hence FTE's lockless read lookup optimization done in cited commit is not possible at the moment. Hence, revert the commit. This avoid below KAZAN call trace. [ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task swapper/12/0 [ 110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+ [ 110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014 [ 110.391225] Call Trace: [ 110.391229] <IRQ> [ 110.391246] dump_stack+0x95/0xd5 [ 110.391307] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391320] print_address_description.constprop.5+0x20/0x320 [ 110.391379] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391435] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391441] __kasan_report+0x149/0x18c [ 110.391499] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391504] kasan_report+0x12/0x20 [ 110.391511] __asan_report_load4_noabort+0x14/0x20 [ 110.391567] find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391625] del_sw_fte_rcu+0x4a/0x100 [mlx5_core] [ 110.391633] rcu_core+0x404/0x1950 [ 110.391640] ? rcu_accelerate_cbs_unlocked+0x100/0x100 [ 110.391649] ? run_rebalance_domains+0x201/0x280 [ 110.391654] rcu_core_si+0xe/0x10 [ 110.391661] __do_softirq+0x181/0x66c [ 110.391670] irq_exit+0x12c/0x150 [ 110.391675] smp_apic_timer_interrupt+0xf0/0x370 [ 110.391681] apic_timer_interrupt+0xf/0x20 [ 110.391684] </IRQ> [ 110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0 [ 110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44 00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d [ 110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX: 000000000000001f [ 110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI: ffff888c277365a8 [ 110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09: 0000000000035280 [ 110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12: ffffffffb1017740 [ 110.391723] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000000 [ 110.391732] ? cpuidle_enter_state+0xea/0xba0 [ 110.391738] cpuidle_enter+0x4f/0xa0 [ 110.391747] call_cpuidle+0x6d/0xc0 [ 110.391752] do_idle+0x360/0x430 [ 110.391758] ? arch_cpu_idle_exit+0x40/0x40 [ 110.391765] ? complete+0x67/0x80 [ 110.391771] cpu_startup_entry+0x1d/0x20 [ 110.391779] start_secondary+0x2f3/0x3c0 [ 110.391784] ? set_cpu_sibling_map+0x2500/0x2500 [ 110.391795] secondary_startup_64+0xa4/0xb0 [ 110.391841] Allocated by task 290: [ 110.391917] save_stack+0x21/0x90 [ 110.391921] __kasan_kmalloc.constprop.8+0xa7/0xd0 [ 110.391925] kasan_kmalloc+0x9/0x10 [ 110.391929] kmem_cache_alloc_trace+0xf6/0x270 [ 110.391987] create_root_ns.isra.36+0x58/0x260 [mlx5_core] [ 110.392044] mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core] [ 110.392092] mlx5_load_one+0xc7a/0x3860 [mlx5_core] [ 110.392139] init_one+0x6ff/0xf90 [mlx5_core] [ 110.392145] local_pci_probe+0xde/0x190 [ 110.392150] work_for_cpu_fn+0x56/0xa0 [ 110.392153] process_one_work+0x678/0x1140 [ 110.392157] worker_thread+0x573/0xba0 [ 110.392162] kthread+0x341/0x400 [ 110.392166] ret_from_fork+0x1f/0x40 [ 110.392218] Freed by task 2742: [ 110.392288] save_stack+0x21/0x90 [ 110.392292] __kasan_slab_free+0x137/0x190 [ 110.392296] kasan_slab_free+0xe/0x10 [ 110.392299] kfree+0x94/0x250 [ 110.392357] tree_put_node+0x257/0x360 [mlx5_core] [ 110.392413] tree_remove_node+0x63/0xb0 [mlx5_core] [ 110.392469] clean_tree+0x199/0x240 [mlx5_core] [ 110.392525] mlx5_cleanup_fs+0x76/0x580 [mlx5_core] [ 110.392572] mlx5_unload+0x22/0xc0 [mlx5_core] [ 110.392619] mlx5_unload_one+0x99/0x260 [mlx5_core] [ 110.392666] remove_one+0x61/0x160 [mlx5_core] [ 110.392671] pci_device_remove+0x10b/0x2c0 [ 110.392677] device_release_driver_internal+0x1e4/0x490 [ 110.392681] device_driver_detach+0x36/0x40 [ 110.392685] unbind_store+0x147/0x200 [ 110.392688] drv_attr_store+0x6f/0xb0 [ 110.392693] sysfs_kf_write+0x127/0x1d0 [ 110.392697] kernfs_fop_write+0x296/0x420 [ 110.392702] __vfs_write+0x66/0x110 [ 110.392707] vfs_write+0x1a0/0x500 [ 110.392711] ksys_write+0x164/0x250 [ 110.392715] __x64_sys_write+0x73/0xb0 [ 110.392720] do_syscall_64+0x9f/0x3a0 [ 110.392725] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 7dee607e ("net/mlx5: Support lockless FTE read lookups") Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Michael Guralnik authored
Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279 ("net/mlx5e: Add TX reporter support") Signed-off-by:
Michael Guralnik <michaelgur@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Dmytro Linkin authored
Following scenario easily break driver logic and crash the kernel: 1. Add rule with mirred actions to same device. 2. Delete this rule. In described scenario rule is not added to database and on deletion driver access invalid entry. Example: $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \ flower skip_sw \ action mirred egress mirror dev ens1f0_1 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1 Dmesg output: [ 376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f) [ 376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728 [ 376.673433] kasan: CONFIG_KASAN_INLINE enabled [ 376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76 [ 376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016 [ 376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core] [ 376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d [ 376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202 [ 376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60 [ 376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282 [ 376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6 [ 376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0 [ 376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0 [ 376.823445] FS: 00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000 [ 376.834971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0 [ 376.854843] Call Trace: [ 376.868542] __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core] [ 376.877735] mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core] [ 376.921549] mlx5e_flow_put+0x2b/0x50 [mlx5_core] [ 376.929813] mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core] [ 376.973030] tc_setup_cb_reoffload+0x29/0xc0 [ 376.980619] fl_reoffload+0x50a/0x770 [cls_flower] [ 377.015087] tcf_block_playback_offloads+0xbd/0x250 [ 377.033400] tcf_block_setup+0x1b2/0xc60 [ 377.057247] tcf_block_offload_cmd+0x195/0x240 [ 377.098826] tcf_block_offload_unbind+0xe7/0x180 [ 377.107056] __tcf_block_put+0xe5/0x400 [ 377.114528] ingress_destroy+0x3d/0x60 [sch_ingress] [ 377.122894] qdisc_destroy+0xf1/0x5a0 [ 377.129993] qdisc_graft+0xa3d/0xe50 [ 377.151227] tc_get_qdisc+0x48e/0xa20 [ 377.165167] rtnetlink_rcv_msg+0x35d/0x8d0 [ 377.199528] netlink_rcv_skb+0x11e/0x340 [ 377.219638] netlink_unicast+0x408/0x5b0 [ 377.239913] netlink_sendmsg+0x71b/0xb30 [ 377.267505] sock_sendmsg+0xb1/0xf0 [ 377.273801] ___sys_sendmsg+0x635/0x900 [ 377.312784] __sys_sendmsg+0xd3/0x170 [ 377.338693] do_syscall_64+0x95/0x460 [ 377.344833] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 377.352321] RIP: 0033:0x7f675e58e090 To avoid this, for every mirred action check if output device was already processed. If so - drop rule with EOPNOTSUPP error. Signed-off-by:Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Daniel Borkmann authored
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215 #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in f1174f77 ("bpf/verifier: rework value tracking"). Fixes: f1174f77 ("bpf/verifier: rework value tracking") Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
-
David S. Miller authored
Igor Russkikh says: ==================== Aquantia/Marvell atlantic bugfixes 2020/01 Here is a set of recently discovered bugfixes, ==================== Signed-off-by:
-
