PCI11010/PCI11414 devices are enhancement of Ethernet LAN743x chip family.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables Intel M.2 7360 WWAN card support on
IOSM Driver.

Control path implementation is a reuse whereas data path
implementation it uses a different protocol called as MUX
Aggregation. The major portion of this patch covers the MUX
Aggregation protocol implementation used for IP traffic
communication.

For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for
control communication.  The user space application or the
modem manager to use wwan AT port for data path establishment.

During probe, driver reads the mux protocol device capability
register to know the mux protocol version supported by device.
Base on which the right mux protocol is initialized for data
path communication.

An overview of an Aggregation Protocol
1>  An IP packet is encapsulated with 16 octet padding header
    to form a Datagram & the start offset of the Datagram is
    indexed into Datagram Header (DH).
2>  Multiple such Datagrams are composed & the start offset of
    each DH is indexed into Datagram Table Header (DTH).
3>  The Datagram Table (DT) is IP session specific & table_length
    item in DTH holds the number of composed datagram pertaining
    to that particular IP session.
4>  And finally the offset of first DTH is indexed into DBH (Datagram
    Block Header).

So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is
exchanged between driver & device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 038fcdaf.

Christophe points out div64_u64() and do_div() have different
calling conventions. One updates the param, the other returns
the result.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/056a7276-c6f0-cd7e-9e46-1d8507a0b6b1@wanadoo.fr/
Fixes: 038fcdaf ("net: ethernet: cavium: use div64_u64() instead of do_div()")
Link: https://lore.kernel.org/r/20220211020544.3262694-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Platform_driver probe functions aren't called with locks
held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.

Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220210204223.104181-1-Julia.Lawall@inria.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch fixes below error by using proper data type.

drivers/net/ethernet/marvell/octeontx2/af/rpm.c: In function
'rpm_cfg_pfc_quanta_thresh':
include/linux/find.h:40:23: error: array subscript 'long unsigned
int[0]' is partly outside array bounds of 'u16[1]' {aka 'short unsigned
int[1]'} [-Werror=array-bounds]
   40 |                 val = *addr & GENMASK(size - 1, offset);
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20220211155539.13931-1-hkelam@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2022-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

wireless-next patches for v5.18

First set of patches for v5.18, with both wireless and stack patches.
rtw89 now has AP mode support and wcn36xx has survey support. But
otherwise pretty normal.

Major changes:

ath11k

* add LDPC FEC type in 802.11 radiotap header

* enable RX PPDU stats in monitor co-exist mode

wcn36xx

* implement survey reporting

brcmfmac

* add CYW43570 PCIE device

rtw88

* rtw8821c: enable RFE 6 devices

rtw89

* AP mode support

mt76

* mt7916 support

* background radar detection support

Eric Dumazet says:

====================
ipv6: remove addrconf reliance on loopback

Second patch in this series removes IPv6 requirement about the netns
loopback device being the last device being dismantled.

This was needed because rt6_uncached_list_flush_dev()
and ip6_dst_ifdown() had to switch dst dev to a known
device (loopback).

Instead of loopback, we can use the (hidden) blackhole_netdev
which is also always there.

This will allow future simplfications of netdev_run_to()
and other parts of the stack like default_device_exit_batch().

Last two patches are optimizations for both IP families.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is an optimization to keep the per-cpu lists as short as possible:

Whenever rt_flush_dev() changes one rtable dst.dev
matching the disappearing device, it can can transfer the object
to a quarantine list, waiting for a final rt_del_uncached_list().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is an optimization to keep the per-cpu lists as short as possible:

Whenever rt6_uncached_list_flush_dev() changes one rt6_info
matching the disappearing device, it can can transfer the object
to a quarantine list, waiting for a final rt6_uncached_list_del().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 addrconf notifiers wants the loopback device to
be the last device being dismantled at netns deletion.

This caused many limitations and work arounds.

Back in linux-5.3, Mahesh added a per host blackhole_netdev
that can be used whenever we need to make sure objects no longer
refer to a disappearing device.

If we attach to blackhole_netdev an ip6_ptr (allocate an idev),
then we can use this special device (which is never freed)
in place of the loopback_dev (which can be freed).

This will permit improvements in netdev_run_todo() and other parts
of the stack where had steps to make sure loopback_dev was
the last device to disappear.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This counter has never been visible, there is little point
trying to maintain it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mv88e6352, mv88e6240 and mv88e6176  have a serdes interface. This patch
allows to configure the output swing to a desired value in the
phy-handle of the port. The value which is peak to peak has to be
specified in microvolts. As the chips only supports eight dedicated
values we return EINVAL if the value in the DTS does not match one of
these values.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Common PHYs and network PCSes often have the possibility to specify
peak-to-peak voltage on the differential pair - the default voltage
sometimes needs to be changed for a particular board.

Add properties `tx-p2p-microvolt` and `tx-p2p-microvolt-names` for this
purpose. The second property is needed to specify the mode for the
corresponding voltage in the `tx-p2p-microvolt` property, if the voltage
is to be used only for speficic mode. More voltage-mode pairs can be
specified.

Example usage with only one voltage (it will be used for all supported
PHY modes, the `tx-p2p-microvolt-names` property is not needed in this
case):

  tx-p2p-microvolt = <915000>;

Example usage with voltages for multiple modes:

  tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
  tx-p2p-microvolt-names = "2500base-x", "usb", "pcie";

Add these properties into a separate file phy/transmit-amplitude.yaml,
which should be referenced by any binding that uses it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
More aggressive DSA cleanup

This series deletes some code which is apparently not needed.

I've had these patches in my tree for a while, and testing on my boards
didn't reveal any issues.

Compared to the RFC v1 series, the only change is the addition of patch 3.
https://patchwork.kernel.org/project/netdevbpf/cover/20220107184842.550334-1-vladimir.oltean@nxp.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 2f1e8ea7 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), suggested by Cong Wang, the
DSA interfaces and their master have different dev->nested_level, which
makes netif_addr_lock() stop complaining about potentially recursive
locking on the same lock class.

So we no longer need DSA slave interfaces to have their own lockdep
class.

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 2f1e8ea7 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), suggested by Cong Wang, the
DSA interfaces and their master have different dev->nested_level, which
makes netif_addr_lock() stop complaining about potentially recursive
locking on the same lock class.

So we no longer need DSA masters to have their own lockdep class.

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no legacy ports, DSA registers a devlink instance with ports
unconditionally for all switch drivers. Therefore, delete the old-style
ndo operations used for determining bridge forwarding domains.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

D. Wythe says:

====================
net/smc: Optimizing performance in short-lived scenarios

This patch set aims to optimizing performance of SMC in short-lived
links scenarios, which is quite unsatisfactory right now.

In our benchmark, we test it with follow scripts:

./wrk -c 10000 -t 4 -H 'Connection: Close' -d 20 http://smc-server

Current performance figures like that:

Running 20s test @ http://11.213.45.6
  4 threads and 10000 connections
  4956 requests in 20.06s, 3.24MB read
  Socket errors: connect 0, read 0, write 672, timeout 0
Requests/sec:    247.07
Transfer/sec:    165.28KB

There are many reasons for this phenomenon, this patch set doesn't
solve it all though, but it can be well alleviated with it in.

Patch 1/5  (Make smc_tcp_listen_work() independent) :

Separate smc_tcp_listen_work() from smc_listen_work(), make them
independent of each other, the busy SMC handshake can not affect new TCP
connections visit any more. Avoid discarding a large number of TCP
connections after being overstock, which is undoubtedly raise the
connection establishment time.

Patch 2/5 (Limit SMC backlog connections):

Since patch 1 has separated smc_tcp_listen_work() from
smc_listen_work(), an unrestricted TCP accept have come into being. This
patch try to put a limit on SMC backlog connections refers to
implementation of TCP.

Patch 3/5 (Limit SMC visits when handshake workqueue congested):

Considering the complexity of SMC handshake right now, in short-lived
links scenarios, this may not be the main scenario of SMC though, it's
performance is still quite poor. This patch try to provide constraint on
SMC handshake when handshake workqueue congested, which is the sign of
SMC handshake stacking in our opinion.

Patch 4/5 (Dynamic control handshake limitation by socket options)

This patch allow applications dynamically control the ability of SMC
handshake limitation. Since SMC don't support set SMC socket option
before,
this patch also have to support SMC's owns socket options.

Patch 5/5 (Add global configure for handshake limitation by netlink)

This patch provides a way to get benefit of handshake limitation
without
modifying any code for applications, which is quite useful for most
existing applications.

After this patch set, performance figures like that:

Running 20s test @ http://11.213.45.6
  4 threads and 10000 connections
  693253 requests in 20.10s, 452.88MB read
Requests/sec:  34488.13
Transfer/sec:     22.53MB

That's a quite well performance improvement, about to 6 to 7 times in my
environment.
---
changelog:
v1 -> v2:
- fix compile warning
- fix invalid dependencies in kconfig
v2 -> v3:
- correct spelling mistakes
- fix useless variable declare
v3 -> v4
- make smc_tcp_ls_wq be static
v4 -> v5
- add dynamic control for SMC auto fallback by socket options
- add global configure for SMC auto fallback through netlink
v5 -> v6
- move auto fallback to net namespace scope
- remove auto fallback attribute in SMC_GEN_SYS_INFO
- add independent attributes for auto fallback
v6 -> v7
- fix wording and the naming issues, rename 'auto fallback' to handshake
  limitation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Although we can control SMC handshake limitation through socket options,
which means that applications who need it must modify their code. It's
quite troublesome for many existing applications. This patch modifies
the global default value of SMC handshake limitation through netlink,
providing a way to put constraint on handshake without modifies any code
for applications.
Suggested-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch aims to add dynamic control for SMC handshake limitation for
every smc sockets, in production environment, it is possible for the
same applications to handle different service types, and may have
different opinion on SMC handshake limitation.

This patch try socket options to complete it, since we don't have socket
option level for SMC yet, which requires us to implement it at the same
time.

This patch does the following:

- add new socket option level: SOL_SMC.
- add new SMC socket option: SMC_LIMIT_HS.
- provide getter/setter for SMC socket options.

Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch intends to provide a mechanism to put constraint on SMC
connections visit according to the pressure of SMC handshake process.
At present, frequent visits will cause the incoming connections to be
backlogged in SMC handshake queue, raise the connections established
time. Which is quite unacceptable for those applications who base on
short lived connections.

There are two ways to implement this mechanism:

1. Put limitation after TCP established.
2. Put limitation before TCP established.

In the first way, we need to wait and receive CLC messages that the
client will potentially send, and then actively reply with a decline
message, in a sense, which is also a sort of SMC handshake, affect the
connections established time on its way.

In the second way, the only problem is that we need to inject SMC logic
into TCP when it is about to reply the incoming SYN, since we already do
that, it's seems not a problem anymore. And advantage is obvious, few
additional processes are required to complete the constraint.

This patch use the second way. After this patch, connections who beyond
constraint will not informed any SMC indication, and SMC will not be
involved in any of its subsequent processes.

Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current implementation does not handling backlog semantics, one
potential risk is that server will be flooded by infinite amount
connections, even if client was SMC-incapable.

This patch works to put a limit on backlog connections, referring to the
TCP implementation, we divides SMC connections into two categories:

1. Half SMC connection, which includes all TCP established while SMC not
connections.

2. Full SMC connection, which includes all SMC established connections.

For half SMC connection, since all half SMC connections starts with TCP
established, we can achieve our goal by put a limit before TCP
established. Refer to the implementation of TCP, this limits will based
on not only the half SMC connections but also the full connections,
which is also a constraint on full SMC connections.

For full SMC connections, although we know exactly where it starts, it's
quite hard to put a limit before it. The easiest way is to block wait
before receive SMC confirm CLC message, while it's under protection by
smc_server_lgr_pending, a global lock, which leads this limit to the
entire host instead of a single listen socket. Another way is to drop
the full connections, but considering the cast of SMC connections, we
prefer to keep full SMC connections.

Even so, the limits of full SMC connections still exists, see commits
about half SMC connection below.

After this patch, the limits of backend connection shows like:

For SMC:

1. Client with SMC-capability can makes 2 * backlog full SMC connections
   or 1 * backlog half SMC connections and 1 * backlog full SMC
   connections at most.

2. Client without SMC-capability can only makes 1 * backlog half TCP
   connections and 1 * backlog full TCP connections.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In multithread and 10K connections benchmark, the backend TCP connection
established very slowly, and lots of TCP connections stay in SYN_SENT
state.

Client: smc_run wrk -c 10000 -t 4 http://server

the netstate of server host shows like:
    145042 times the listen queue of a socket overflowed
    145042 SYNs to LISTEN sockets dropped

One reason of this issue is that, since the smc_tcp_listen_work() shared
the same workqueue (smc_hs_wq) with smc_listen_work(), while the
smc_listen_work() do blocking wait for smc connection established. Once
the workqueue became congested, it's will block the accept() from TCP
listen.

This patch creates a independent workqueue(smc_tcp_ls_wq) for
smc_tcp_listen_work(), separate it from smc_listen_work(), which is
quite acceptable considering that smc_tcp_listen_work() runs very fast.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Schema changes:

- support for mdio-connected switches (mdio driver), recognized by
  checking the presence of property "reg"
- new compatible strings for rtl8367s and rtl8367rb
- "interrupt-controller" was not added as a required property. It might
  still work polling the ports when missing.

Examples changes:

- renamed "switch_intc" to make it unique between examples
- removed "dsa-mdio" from mdio compatible property
- renamed phy@0 to ethernet-phy@0 (not tested with real HW)
  phy@ requires #phy-cells
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter and can.

Current release - new code bugs:

   - sparx5: fix get_stat64 out-of-bound access and crash

   - smc: fix netdev ref tracker misuse

  Previous releases - regressions:

   - eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
     overflows

   - eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
     over IP

   - bonding: fix rare link activation misses in 802.3ad mode

  Previous releases - always broken:

   - tcp: fix tcp sock mem accounting in zero-copy corner cases

   - remove the cached dst when uncloning an skb dst and its metadata,
     since we only have one ref it'd lead to an UaF

   - netfilter:
      - conntrack: don't refresh sctp entries in closed state
      - conntrack: re-init state for retransmitted syn-ack, avoid
        connection establishment getting stuck with strange stacks
      - ctnetlink: disable helper autoassign, avoid it getting lost
      - nft_payload: don't allow transport header access for fragments

   - dsa: fix use of devres for mdio throughout drivers

   - eth: amd-xgbe: disable interrupts during pci removal

   - eth: dpaa2-eth: unregister netdev before disconnecting the PHY

   - eth: ice: fix IPIP and SIT TSO offload"

* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
  net: mscc: ocelot: fix mutex lock error during ethtool stats read
  ice: Avoid RTNL lock when re-creating auxiliary device
  ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
  ice: fix IPIP and SIT TSO offload
  ice: fix an error code in ice_cfg_phy_fec()
  net: mpls: Fix GCC 12 warning
  dpaa2-eth: unregister the netdev before disconnecting from the PHY
  skbuff: cleanup double word in comment
  net: macb: Align the dma and coherent dma masks
  mptcp: netlink: process IPv6 addrs in creating listening sockets
  selftests: mptcp: add missing join check
  net: usb: qmi_wwan: Add support for Dell DW5829e
  vlan: move dev_put into vlan_dev_uninit
  vlan: introduce vlan_dev_free_egress_priority
  ax25: fix UAF bugs of net_device caused by rebinding operation
  net: dsa: fix panic when DSA master device unbinds on shutdown
  net: amd-xgbe: disable interrupts during pci removal
  tipc: rate limit warning for received illegal binding update
  net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
  ...

Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Build and run-time fixes to pidfd, clone3, and ir tests"

* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ir: fix build with ancient kernel headers
  selftests: fixup build warnings in pidfd / clone3 tests
  pidfd: fix test failure due to stack overflow on some arches

Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "Fixes to the test and usage documentation"

* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: KUnit: Fix usage bug
  kunit: fix missing f in f-string in run_checks.py

Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.

To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.

Fixes: f53a2ce8 ("net: dsa: mv88e6xxx: don't use devres for mdiobus")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-02-10

Dan Carpenter propagates an error in FEC configuration.

Jesse fixes TSO offloads of IPIP and SIT frames.

Dave adds a dedicated LAG unregister function to resolve a KASAN error
and moves auxiliary device re-creation after LAG removal to the service
task to avoid issues with RTNL lock.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Avoid RTNL lock when re-creating auxiliary device
  ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
  ice: fix IPIP and SIT TSO offload
  ice: fix an error code in ice_cfg_phy_fec()
====================

Link: https://lore.kernel.org/r/20220210170515.2609656-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.

This patch fixes the former blamed commit, but the bug was introduced in
the latter.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 1e1caa97 ("ocelot: Clean up stats update deferred work")
Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/qca8k.c:422:37-43: ERROR: application of sizeof to pointer

 sizeof when applied to a pointer typed expression gives the size of
 the pointer

Generated by: scripts/coccinelle/misc/noderef.cocci

Fixes: 90386223 ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
CC: Ansuel Smith <ansuelsmth@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220209221304.GA17529@d2214a582157Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a call to re-create the auxiliary device happens in a context that has
already taken the RTNL lock, then the call flow that recreates auxiliary
device can hang if there is another attempt to claim the RTNL lock by the
auxiliary driver.

To avoid this, any call to re-create auxiliary devices that comes from
an source that is holding the RTNL lock (e.g. netdev notifier when
interface exits a bond) should execute in a separate thread.  To
accomplish this, add a flag to the PF that will be evaluated in the
service task and dealt with there.

Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently, the same handler is called for both a NETDEV_BONDING_INFO
LAG unlink notification as for a NETDEV_UNREGISTER call.  This is
causing a problem though, since the netdev_notifier_info passed has
a different structure depending on which event is passed.  The problem
manifests as a call trace from a BUG: KASAN stack-out-of-bounds error.

Fix this by creating a handler specific to NETDEV_UNREGISTER that only
is passed valid elements in the netdev_notifier_info struct for the
NETDEV_UNREGISTER event.

Also included is the removal of an unbalanced dev_put on the peer_netdev
and related braces.

Fixes: 6a8b3572 ("ice: Respond to a NETDEV_UNREGISTER event for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.

This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).

With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.

Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Propagate the error code from ice_get_link_default_override() instead
of returning success.

Fixes: ea78ce4d ("ice: add link lenient and default override support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kmalloc(). For example:

struct switchdev_deferred_item {
    ...
    unsigned long data[];
};

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 563f8e97 ("ipv4: Stop taking ECN bits into account in
fib4-rules") replaced the validation test on frh->tos. While the new
test is stricter for ECN bits, it doesn't detect the use of high order
DSCP bits. This would be fine if IPv4 could properly handle them. But
currently, most IPv4 lookups are done with the three high DSCP bits
masked. Therefore, using these bits doesn't lead to the expected
result.

Let's reject such configurations again, so that nobody starts to
use and make any assumption about how the stack handles the three high
order DSCP bits in fib4 rules.

Fixes: 563f8e97 ("ipv4: Stop taking ECN bits into account in fib4-rules")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds TC feature for VFs also. When MCAM
rules are allocated for a VF then either TC or ntuple
filters can be used. Below are the commands to use
TC feature for a VF(say lbk0):

devlink dev param set pci/0002:01:00.1 name mcam_count value 16 \
 cmode runtime
ethtool -K lbk0 hw-tc-offload on
ifconfig lbk0 up
tc qdisc add dev lbk0 ingress
tc filter add dev lbk0 parent ffff: protocol ip flower skip_sw \
 dst_mac 98:03:9b:83:aa:12 action police rate 100Mbit burst 5000

Also to modify any fields of the hardware context with
NIX_AQ_INSTOP_WRITE command then corresponding masks of those
fields must be set as per hardware. This was missing in
ingress ratelimiting context. This patch sets those masks also.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>