Pull perf fixes from Ingo Molnar:
 "Two hw-enablement patches, two race fixes, three fixes for regressions
  of semantics, plus a number of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add proper condition to run sched_task callbacks
  perf/core: Fix locking for children siblings group read
  perf/core: Fix scheduling regression of pinned groups
  perf/x86/intel: Fix debug_store reset field for freq events
  perf/x86/intel: Add Goldmont Plus CPU PMU support
  perf/x86/intel: Enable C-state residency events for Apollo Lake
  perf symbols: Accept zero as the kernel base address
  Revert "perf/core: Drop kernel samples even though :u is specified"
  perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
  perf evsel: State in the default event name if attr.exclude_kernel is set
  perf evsel: Fix attr.exclude_kernel setting for default cycles:p

Pull locking fixlet from Ingo Molnar:
 "Remove an unnecessary priority adjustment in the rtmutex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Remove unnecessary priority adjustment

Pull irq fixes from Ingo Molnar:
 "A resume_irq() fix, plus a number of static declaration fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/digicolor: Drop unnecessary static
  irqchip/mips-cpu: Drop unnecessary static
  irqchip/gic/realview: Drop unnecessary static
  irqchip/mips-gic: Remove population of irq domain names
  genirq/PM: Properly pretend disabled state when force resuming interrupts

Pull core fixes from Ingo Molnar:
 "A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debug: Fix WARN_ON_ONCE() for modules
  MAINTAINERS: Update the PTRACE entry

We have 2 functions using the same sched_task callback:

  - PEBS drain for free running counters
  - LBR save/store

Both of them are called from intel_pmu_sched_task() and
either of them can be unwillingly triggered when the
other one is configured to run.

Let's say there's PEBS drain configured in sched_task
callback for the event, but in the callback itself
(intel_pmu_sched_task()) we will also run the code for
LBR save/restore, which we did not ask for, but the
code in intel_pmu_sched_task() does not check for that.

This can lead to extra cycles in some perf monitoring,
like when we monitor PEBS event without LBR data.

  # perf record --no-timestamp -c 10000 -e cycles:p ./perf bench sched pipe -l 1000000

  (We need PEBS, non freq/non timestamp event to enable
   the sched_task callback)

The perf stat of cycles and msr:write_msr for above
command before the change:
  ...
  Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
                                 ./perf bench sched pipe -l 1000000' (5 runs):

    18,519,557,441      cycles:k
        91,195,527      msr:write_msr

      29.334476406 seconds time elapsed

And after the change:
  ...
  Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
                                 ./perf bench sched pipe -l 1000000' (5 runs):

    18,704,973,540      cycles:k
        27,184,720      msr:write_msr

      16.977875900 seconds time elapsed

There's no affect on cycles:k because the sched_task happens
with events switched off, however the msr:write_msr tracepoint
counter together with almost 50% of time speedup show the
improvement.

Monitoring LBR event and having extra PEBS drain processing
in sched_task callback showed just a little speedup, because
the drain function does not do much extra work in case there
is no PEBS data.

Adding conditions to recognize the configured work that needs
to be done in the x86_pmu's sched_task callback.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170719075247.GA27506@kravaSigned-off-by: Ingo Molnar <mingo@kernel.org>

We're missing ctx lock when iterating children siblings
within the perf_read path for group reading. Following
race and crash can happen:

User space doing read syscall on event group leader:

T1:
  perf_read
    lock event->ctx->mutex
    perf_read_group
      lock leader->child_mutex
      __perf_read_group_add(child)
        list_for_each_entry(sub, &leader->sibling_list, group_entry)

---->   sub might be invalid at this point, because it could
        get removed via perf_event_exit_task_context in T2

Child exiting and cleaning up its events:

T2:
  perf_event_exit_task_context
    lock ctx->mutex
    list_for_each_entry_safe(child_event, next, &child_ctx->event_list,...
      perf_event_exit_event(child)
        lock ctx->lock
        perf_group_detach(child)
        unlock ctx->lock

---->   child is removed from sibling_list without any sync
        with T1 path above

        ...
        free_event(child)

Before the child is removed from the leader's child_list,
(and thus is omitted from perf_read_group processing), we
need to ensure that perf_read_group touches child's
siblings under its ctx->lock.

Peter further notes:

| One additional note; this bug got exposed by commit:
|
|   ba5213ae ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
|
| which made it possible to actually trigger this code-path.
Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ba5213ae ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

gcc-7 warns about the result of a constant multiplication used as
a boolean:

drivers/ide/ide-timings.c: In function 'ide_timing_quantize':
drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
  q->setup   = EZ(t->setup   * 1000,  T);

This slightly rearranges the macro to simplify the code and avoid
the warning at the same time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) BPF verifier signed/unsigned value tracking fix, from Daniel
    Borkmann, Edward Cree, and Josef Bacik.

 2) Fix memory allocation length when setting up calls to
    ->ndo_set_mac_address, from Cong Wang.

 3) Add a new cxgb4 device ID, from Ganesh Goudar.

 4) Fix FIB refcount handling, we have to set it's initial value before
    the configure callback (which can bump it). From David Ahern.

 5) Fix double-free in qcom/emac driver, from Timur Tabi.

 6) A bunch of gcc-7 string format overflow warning fixes from Arnd
    Bergmann.

 7) Fix link level headroom tests in ip_do_fragment(), from Vasily
    Averin.

 8) Fix chunk walking in SCTP when iterating over error and parameter
    headers. From Alexander Potapenko.

 9) TCP BBR congestion control fixes from Neal Cardwell.

10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.

11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
    Wang.

12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
    from Gao Feng.

13) Cannot release skb->dst in UDP if IP options processing needs it.
    From Paolo Abeni.

14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
    Levin and myself.

15) Revert some rtnetlink notification changes that are causing
    regressions, from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  net: bonding: Fix transmit load balancing in balance-alb mode
  rds: Make sure updates to cp_send_gen can be observed
  net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
  ipv4: initialize fib_trie prior to register_netdev_notifier call.
  rtnetlink: allocate more memory for dev_set_mac_address()
  net: dsa: b53: Add missing ARL entries for BCM53125
  bpf: more tests for mixed signed and unsigned bounds checks
  bpf: add test for mixed signed and unsigned bounds checks
  bpf: fix up test cases with mixed signed/unsigned bounds
  bpf: allow to specify log level and reduce it for test_verifier
  bpf: fix mixed signed/unsigned derived min/max value bounds
  ipv6: avoid overflow of offset in ip6_find_1stfragopt
  net: tehuti: don't process data if it has not been copied from userspace
  Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
  net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
  dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
  NET: dwmac: Make dwmac reset unconditional
  net: Zero terminate ifr_name in dev_ifname().
  wireless: wext: terminate ifr name coming from userspace
  netfilter: fix netfilter_net_init() return
  ...

balance-alb mode used to have transmit dynamic load balancing feature
enabled by default.  However, transmit dynamic load balancing no longer
works in balance-alb after commit 8b426dc5 ("bonding: remove
hardcoded value").

Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to
send packets.  This function uses the parameter tlb_dynamic_lb.
tlb_dynamic_lb used to have the default value of 1 for balance-alb, but
now the value is set to 0 except in balance-tlb.

Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb
for balance-alb similar to balance-tlb.

Fixes: 8b426dc5 ("bonding: remove hardcoded value")
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

cp->cp_send_gen is treated as a normal variable, although it may be
used by different threads.

This is fixed by using {READ,WRITE}_ONCE when it is incremented and
READ_ONCE when it is read outside the {acquire,release}_in_xmit
protection.

Normative reference from the Linux-Kernel Memory Model:

    Loads from and stores to shared (but non-atomic) variables should
    be protected with the READ_ONCE(), WRITE_ONCE(), and
    ACCESS_ONCE().

Clause 5.1.2.4/25 in the C standard is also relevant.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Push the request_irq function to the end of probe so as
to ensure all the required fields are populated in the event
of an ISR getting executed right after requesting the irq.

Currently while loading the crash kernel a crash was seen as
soon as devm_request_threaded_irq was called. This was due to
n->poll being NULL which is called as part of net_rx_action
function.
Suggested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Net stack initialization currently initializes fib-trie after the
first call to netdevice_notifier() call. In fact fib_trie initialization
needs to happen before first rtnl_register(). It does not cause any problem
since there are no devices UP at this moment, but trying to bring 'lo'
UP at initialization would make this assumption wrong and exposes the issue.

Fixes following crash

 Call Trace:
  ? alternate_node_alloc+0x76/0xa0
  fib_table_insert+0x1b7/0x4b0
  fib_magic.isra.17+0xea/0x120
  fib_add_ifaddr+0x7b/0x190
  fib_netdev_event+0xc0/0x130
  register_netdevice_notifier+0x1c1/0x1d0
  ip_fib_init+0x72/0x85
  ip_rt_init+0x187/0x1e9
  ip_init+0xe/0x1a
  inet_init+0x171/0x26c
  ? ipv4_offload_init+0x66/0x66
  do_one_initcall+0x43/0x160
  kernel_init_freeable+0x191/0x219
  ? rest_init+0x80/0x80
  kernel_init+0xe/0x150
  ret_from_fork+0x22/0x30
 Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08
 RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28
 CR2: 0000000000000014

Fixes: 7b1a74fd ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.")
Fixes: 7f9b8052 ("[IPV4]: fib hash|trie initialization")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtnet_set_mac_address() interprets mac address as struct
sockaddr, but upper layer only allocates dev->addr_len
which is ETH_ALEN + sizeof(sa_family_t) in this case.

We lack a unified definition for mac address, so just fix
the upper layer, this also allows drivers to interpret it
to struct sockaddr freely.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.

Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF map value adjust fix

First patch in the series is the actual fix and the remaining
patches are just updates to selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a couple of more test cases to BPF selftests that are related
to mixed signed and unsigned checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

These failed due to a bug in verifier bounds handling.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the few existing test cases that used mixed signed/unsigned
bounds and switch them only to one flavor. Reason why we need this
is that proper boundaries cannot be derived from mixed tests.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward reported that there's an issue in min/max value bounds
tracking when signed and unsigned compares both provide hints
on limits when having unknown variables. E.g. a program such
as the following should have been rejected:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff8a94cda93400
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+7
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = -1
  10: (2d) if r1 > r2 goto pc+3
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  11: (65) if r1 s> 0x1 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  12: (0f) r0 += r1
  13: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1
  R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
  14: (b7) r0 = 0
  15: (95) exit

What happens is that in the first part ...

   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = -1
  10: (2d) if r1 > r2 goto pc+3

... r1 carries an unsigned value, and is compared as unsigned
against a register carrying an immediate. Verifier deduces in
reg_set_min_max() that since the compare is unsigned and operation
is greater than (>), that in the fall-through/false case, r1's
minimum bound must be 0 and maximum bound must be r2. Latter is
larger than the bound and thus max value is reset back to being
'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now
'R1=inv,min_value=0'. The subsequent test ...

  11: (65) if r1 s> 0x1 goto pc+2

... is a signed compare of r1 with immediate value 1. Here,
verifier deduces in reg_set_min_max() that since the compare
is signed this time and operation is greater than (>), that
in the fall-through/false case, we can deduce that r1's maximum
bound must be 1, meaning with prior test, we result in r1 having
the following state: R1=inv,min_value=0,max_value=1. Given that
the actual value this holds is -8, the bounds are wrongly deduced.
When this is being added to r0 which holds the map_value(_adj)
type, then subsequent store access in above case will go through
check_mem_access() which invokes check_map_access_adj(), that
will then probe whether the map memory is in bounds based
on the min_value and max_value as well as access size since
the actual unknown value is min_value <= x <= max_value; commit
fce366a9 ("bpf, verifier: fix alu ops against map_value{,
_adj} register types") provides some more explanation on the
semantics.

It's worth to note in this context that in the current code,
min_value and max_value tracking are used for two things, i)
dynamic map value access via check_map_access_adj() and since
commit 06c1c049 ("bpf: allow helpers access to variable memory")
ii) also enforced at check_helper_mem_access() when passing a
memory address (pointer to packet, map value, stack) and length
pair to a helper and the length in this case is an unknown value
defining an access range through min_value/max_value in that
case. The min_value/max_value tracking is /not/ used in the
direct packet access case to track ranges. However, the issue
also affects case ii), for example, the following crafted program
based on the same principle must be rejected as well:

   0: (b7) r2 = 0
   1: (bf) r3 = r10
   2: (07) r3 += -512
   3: (7a) *(u64 *)(r10 -16) = -8
   4: (79) r4 = *(u64 *)(r10 -16)
   5: (b7) r6 = -1
   6: (2d) if r4 > r6 goto pc+5
  R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
  R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
   7: (65) if r4 s> 0x1 goto pc+4
  R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
  R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1
  R10=fp
   8: (07) r4 += 1
   9: (b7) r5 = 0
  10: (6a) *(u16 *)(r10 -512) = 0
  11: (85) call bpf_skb_load_bytes#26
  12: (b7) r0 = 0
  13: (95) exit

Meaning, while we initialize the max_value stack slot that the
verifier thinks we access in the [1,2] range, in reality we
pass -7 as length which is interpreted as u32 in the helper.
Thus, this issue is relevant also for the case of helper ranges.
Resetting both bounds in check_reg_overflow() in case only one
of them exceeds limits is also not enough as similar test can be
created that uses values which are within range, thus also here
learned min value in r1 is incorrect when mixed with later signed
test to create a range:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff880ad081fa00
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+7
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = 2
  10: (3d) if r2 >= r1 goto pc+3
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  11: (65) if r1 s> 0x4 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
  R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  12: (0f) r0 += r1
  13: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4
  R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  14: (b7) r0 = 0
  15: (95) exit

This leaves us with two options for fixing this: i) to invalidate
all prior learned information once we switch signed context, ii)
to track min/max signed and unsigned boundaries separately as
done in [0]. (Given latter introduces major changes throughout
the whole verifier, it's rather net-next material, thus this
patch follows option i), meaning we can derive bounds either
from only signed tests or only unsigned tests.) There is still the
case of adjust_reg_min_max_vals(), where we adjust bounds on ALU
operations, meaning programs like the following where boundaries
on the reg get mixed in context later on when bounds are merged
on the dst reg must get rejected, too:

   0: (7a) *(u64 *)(r10 -8) = 0
   1: (bf) r2 = r10
   2: (07) r2 += -8
   3: (18) r1 = 0xffff89b2bf87ce00
   5: (85) call bpf_map_lookup_elem#1
   6: (15) if r0 == 0x0 goto pc+6
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
   7: (7a) *(u64 *)(r10 -16) = -8
   8: (79) r1 = *(u64 *)(r10 -16)
   9: (b7) r2 = 2
  10: (3d) if r2 >= r1 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
  11: (b7) r7 = 1
  12: (65) if r7 s> 0x0 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp
  13: (b7) r0 = 0
  14: (95) exit

  from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
  R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp
  15: (0f) r7 += r1
  16: (65) if r7 s> 0x4 goto pc+2
  R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
  17: (0f) r0 += r7
  18: (72) *(u8 *)(r0 +0) = 0
  R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3
  R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
  19: (b7) r0 = 0
  20: (95) exit

Meaning, in adjust_reg_min_max_vals() we must also reset range
values on the dst when src/dst registers have mixed signed/
unsigned derived min/max value bounds with one unbounded value
as otherwise they can be added together deducing false boundaries.
Once both boundaries are established from either ALU ops or
compare operations w/o mixing signed/unsigned insns, then they
can safely be added to other regs also having both boundaries
established. Adding regs with one unbounded side to a map value
where the bounded side has been learned w/o mixing ops is
possible, but the resulting map value won't recover from that,
meaning such op is considered invalid on the time of actual
access. Invalid bounds are set on the dst reg in case i) src reg,
or ii) in case dst reg already had them. The only way to recover
would be to perform i) ALU ops but only 'add' is allowed on map
value types or ii) comparisons, but these are disallowed on
pointers in case they span a range. This is fine as only BPF_JEQ
and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers
which potentially turn them into PTR_TO_MAP_VALUE type depending
on the branch, so only here min/max value cannot be invalidated
for them.

In terms of state pruning, value_from_signed is considered
as well in states_equal() when dealing with adjusted map values.
With regards to breaking existing programs, there is a small
risk, but use-cases are rather quite narrow where this could
occur and mixing compares probably unlikely.

Joint work with Josef and Edward.

  [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html

Fixes: 48461135 ("bpf: allow access into map value arrays")
Reported-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management fixes from Rafael Wysocki:
 "These are two stable-candidate fixes for the intel_pstate driver and
  the generic power domains (genpd) framework.

  Specifics:

   - Fix the average CPU load computations in the intel_pstate driver on
     Knights Landing (Xeon Phi) processors that require an extra factor
     to compensate for a rate change differences between the TSC and
     MPERF which is missing (Srinivas Pandruvada).

   - Fix an initialization ordering issue in the generic power domains
     (genpd) framework (Sudeep Holla)"

* tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
  cpufreq: intel_pstate: Correct the busy calculation for KNL

They really are, and the "take the address of a single character" makes
the string fortification code unhappy (it believes that you can now only
acccess one byte, rather than a byte range, and then raises errors for
the memory copies going on in there).

We could now remove a few 'addressof' operators (since arrays naturally
degrade to pointers), but this is the minimal patch that just changes
the C prototypes of those template arrays (the templates themselves are
defined in inline asm).
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Acked-and-tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull misc filesystem fixes from Jan Kara:
 "Several ACL related fixes for ext2, reiserfs, and hfsplus.

  And also one minor isofs cleanup"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  hfsplus: Don't clear SGID when inheriting ACLs
  isofs: Fix off-by-one in 'session' mount option parsing
  reiserfs: preserve i_mode if __reiserfs_set_acl() fails
  ext2: preserve i_mode if ext2_set_acl() fails
  ext2: Don't clear SGID when inheriting ACLs
  reiserfs: Don't clear SGID when inheriting ACLs

Pull f2fs fixes from Jaegeuk Kim:
 "We've filed some bug fixes:

   - missing f2fs case in terms of stale SGID bit, introduced by Jan

   - build error for seq_file.h

   - avoid cpu lockup

   - wrong inode_unlock in error case"

* tag 'for-f2fs-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: avoid cpu lockup
  f2fs: include seq_file.h for sysfs.c
  f2fs: Don't clear SGID when inheriting ACLs
  f2fs: remove extra inode_unlock() in error path

Pull audit fix from Paul Moore:
 "A small audit fix, just a single line, to plug a memory leak in some
  audit error handling code"

* 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix memleak in auditd_send_unicast_skb.

Pull libnvdimm fixes from Dan Williams:
 "A handful of small fixes for 4.13-rc2. Three of these fixes are tagged
  for -stable. They have all appeared in at least one -next release with
  no reported issues

   - Fix handling of media errors that span a sector

   - Fix support of multiple namespaces in a libnvdimm region being in
     device-dax mode

   - Clean up the machine check notifier properly when the nfit driver
     fails to register

   - Address a static analysis (smatch) report in device-dax"

* tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix sysfs duplicate warnings
  MAINTAINERS: list drivers/acpi/nfit/ files for libnvdimm sub-system
  acpi/nfit: Fix memory corruption/Unregister mce decoder on failure
  device-dax: fix 'passing zero to ERR_PTR()' warning
  libnvdimm: fix badblock range handling of ARS range

Pull HID fixes from Jiri Kosina:

 - HID multitouch 4.12 regression fix from Dmitry Torokhov

 - error handling fix for HID++ driver from Gustavo A. R. Silva

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value
  HID: multitouch: do not blindly set EV_KEY or EV_ABS bits

* intel_pstate:
  cpufreq: intel_pstate: Correct the busy calculation for KNL

* pm-domains:
  PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present

Check return value from call to devm_kmemdup() in order to prevent a NULL
pointer dereference.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM
code turned into an oops.  As it turns out, WARN_ON_ONCE() seems to be
completely broken when called from a module.

The bug was introduced with the following commit:

  19d43626 ("debug: Add _ONCE() logic to report_bug()")

That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug
trap handler.  It requires a writable bug table so that the BUGFLAG_DONE
bit can be written to the flags to indicate the first warning has
occurred.

The bug table was made writable for vmlinux, which relies on
vmlinux.lds.S and vmlinux.lds.h for laying out the sections.  However,
it wasn't made writable for modules, which rely on the ELF section
header flags.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 19d43626 ("debug: Add _ONCE() logic to report_bug()")
Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Vince Weaver reported:

> I was tracking down some regressions in my perf_event_test testsuite.
> Some of the tests broke in the 4.11-rc1 timeframe.
>
> I've bisected one of them, this report is about
>	tests/overflow/simul_oneshot_group_overflow
> This test creates an event group containing two sampling events, set
> to overflow to a signal handler (which disables and then refreshes the
> event).
>
> On a good kernel you get the following:
> 	Event perf::instructions with period 1000000
> 	Event perf::instructions with period 2000000
> 		fd 3 overflows: 946 (perf::instructions/1000000)
> 		fd 4 overflows: 473 (perf::instructions/2000000)
> 	Ending counts:
> 		Count 0: 946379875
> 		Count 1: 946365218
>
> With the broken kernels you get:
> 	Event perf::instructions with period 1000000
> 	Event perf::instructions with period 2000000
> 		fd 3 overflows: 938 (perf::instructions/1000000)
> 		fd 4 overflows: 318 (perf::instructions/2000000)
> 	Ending counts:
> 		Count 0: 946373080
> 		Count 1: 653373058

The root cause of the bug is that the following commit:

  487f05e1 ("perf/core: Optimize event rescheduling on active contexts")

erronously assumed that event's 'pinned' setting determines whether the
event belongs to a pinned group or not, but in fact, it's the group
leader's pinned state that matters.

This was discovered by Vince in the test case described above, where two instruction
counters are grouped, the group leader is pinned, but the other event is not;
in the regressed case the counters were off by 33% (the difference between events'
periods), but should be the same within the error margin.

Fix the problem by looking at the group leader's pinning.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 487f05e1 ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/87lgnmvw7h.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

In some cases, offset can overflow and can cause an infinite loop in
ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and
cap it at IPV6_MAXPLEN, since packets larger than that should be invalid.

This problem has been here since before the beginning of git history.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The array data is only populated with valid information from userspace
if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on
the stack. The subsequent switch statement acts on a subcommand in
data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which
seems incorrect to me.  Instead, just return EOPNOTSUPP for the case
where cmd == SIOCDEVPRIVATE to avoid this issue.

As a side note, I suspect that the original intention of the code
was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the
current logic is reversed). However, I don't wont to change the current
semantics in case any userspace code relies on this existing behaviour.

Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit cd8966e7.

The duplicate CHANGEADDR event message is sent regardless of link
status whereas the setlink changes only generate a notification when
the link is up. Not sending a notification when the link is down breaks
dhcpcd which only processes hwaddr changes when the link is down.

Fixes reported regression:
    https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f39908d3 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
ports 9 & 10') added support for setting the CMODE for the 6390X family,
but only enabled it for 9290 and 6390 - and left out 6390X.

Fix support for setting the CMODE on 6390X also by assigning
mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
mv88e6390x_ops too.

Fixes: f39908d3 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.

Fixed the document heading and node name.

Fixes: 80d60761 ("dt-binding: ptp: add bindings document for dte based ptp clock")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently llist_for_each_entry() and llist_for_each_entry_safe() iterate
until &pos->member != NULL.  But when building the kernel with Clang,
the compiler assumes &pos->member cannot be NULL if the member's offset
is greater than 0 (which would be equivalent to the object being
non-contiguous in memory).  Therefore the loop condition is always true,
and the loops become infinite.

To work around this, introduce the member_address_is_nonnull() macro,
which casts object pointer to uintptr_t, thus letting the member pointer
to be NULL.
Signed-off-by: Alexander Potapenko <glider@google.com>
Tested-by: Sodagudi Prasad <psodagud@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Unconditional reset dwmac before HW init if reset controller is present.

In existing implementation we reset dwmac only after second module
probing:
(module load -> unload -> load again [reset happens])

Now we reset dwmac at every module load:
(module load [reset happens] -> unload -> load again [reset happens])

Also some reset controllers have only reset callback instead of
assert + deassert callbacks pair, so handle this case.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ifr.ifr_name is passed around and assumed to be NULL terminated.
Signed-off-by: David S. Miller <davem@davemloft.net>

ifr name is assumed to be a valid string by the kernel, but nothing
was forcing username to pass a valid string.

In turn, this would cause panics as we tried to access the string
past it's valid memory.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>