- 25 Jan, 2016 2 commits
-
-
Daniel Vetter authored
Just prep work before I throw more drm_event refactorings on top. Acked-by:
Daniel Stone <daniels@collabora.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-2-git-send-email-daniel.vetter@ffwll.chSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Every new KMS driver writer seems to run into this and wonder how exactly drm_fb_helper_initial_config can die doing nothing at all. Set up some big warnings signs around this newbie trap to avoid future frustration and wasting everyone's time. v2: Edits from Laurent. Cc: Carlos Palminha <CARLOS.PALMINHA@synopsys.com> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: laurent.pinchart@ideasonboard.com Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453449225-10954-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by:
-
- 20 Jan, 2016 1 commit
-
-
Colin Ian King authored
Duplicated const, only one is required. Also reformat line to ensure it is less than 80 columns wide. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453287574-3645-1-git-send-email-colin.king@canonical.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 19 Jan, 2016 1 commit
-
-
Marek Szyprowski authored
When no console framebuffer is enabled, the default plane state is defined by plane reset function. If driver uses generic helper, then rotation property is set to zero. This is not a valid value for that enum. This patch sets default rotation value to DRM_ROTATE_0. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453192008-13283-1-git-send-email-m.szyprowski@samsung.comSigned-off-by:
-
- 18 Jan, 2016 3 commits
-
-
Liu Ying authored
One of the two local variables old_crtc_state is redundantly defined in the function disable_outputs(). It has only a scope partway through the block for_each_connector_in_state. So, let's remove it and use the one which has the scope within the function disable_outputs(). Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453088195-2564-1-git-send-email-gnuiyl@gmail.comSigned-off-by:
-
Liu Ying authored
We've done sanity NULL pointer check on set->mode at the beginning of drm_crtc_helper_set_config() and bailed out if necessary, thus any later on check is redundant. Signed-off-by:
-
Liu Ying authored
We've done sanity NULL pointer check on set->fb at the beginning of drm_crtc_helper_set_config() and bailed out if necessary, thus any later on check or case handling is redundant. Signed-off-by:
-
- 17 Jan, 2016 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next misc i915 fixes all over the place. * tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long. drm/i915: intel_hpd_init(): Fix suspend/resume reprobing drm/i915: shut up gen8+ SDE irq dmesg noise, again drm/i915: Restore inhibiting the load of the default context drm/i915: Tune down rpm wakelock debug checks drm/i915: Avoid writing relocs with addresses in non-canonical form drm/i915: Move Braswell stop_machine GGTT insertion workaround
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ...
-
- 15 Jan, 2016 1 commit
-
-
Maxime Ripard authored
The drm_fbdev_cma_init function always calls the drm_helper_disable_unused_functions. Since it's part of the usual probe process, all the drivers using that helper will end up having their encoder and CRTC disable functions called at probe if their device has not been reported as enabled. This could be fixed by reading out from the registers the current state of the device if it is enabled, but even that will not handle the case where the device is actually disabled. Moreover, the drivers using the atomic modesetting expect that their enable and disable callback to be called when the device is already enabled or disabled (respectively). We can however fix this issue by moving the call to drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the drivers needing it (all the drivers calling drm_fbdev_cma_init and not using the atomic modesetting) explicitly call it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by:
-
- 13 Jan, 2016 30 commits
-
-
Dave Airlie authored
this fixes the build on arm. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This 2nd pull request includes the following, - add configurable plane support and relevant cleanups. - fixup kernel panic issue at drm releasing. - remove unnecessary codes. This has been delayed to resolve a critical issue - which incurrs a kernel panic when driver is released - and review it. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix kernel panic issue at drm releasing drm/exynos: crtc: do not wait for the scanout completion drm/exynos: mixer: properly update all planes on the same vblank event drm/exynos: crtc: rework atomic_{begin,flush} drm/exynos: mixer: unify a check for video-processor window drm/exynos: mixer: also allow ARGB1555 and ARGB4444 drm/exynos: mixer: refactor layer setup drm/exynos: mixer: remove all static blending setup drm/exynos: mixer: set window priority based on zpos drm/exynos: make zpos property configurable drm/exynos: rename zpos to index
-
git://git.pengutronix.de/git/lst/linuxDave Airlie authored
etnaviv fixes. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: fix workaround for GC500 drm/etnaviv: unlock on error in etnaviv_gem_get_iova()
-
Dave Airlie authored
Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next new rockchip bits. * 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip: drm: rockchip: Support Synopsys DW MIPI DSI Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver drm/rockchip: return a true clock rate to adjusted_mode
-
Thomas Hellstrom authored
When the framebuffer is a vmwgfx dma buffer and a proxy surface is created, the vmw_kms_update_proxy() function requires that the proxy surface width and the framebuffer pitch are compatible, otherwise display corruption occurs as seen in gnome-shell/native with software 3D. Since the framebuffer pitch is determined by user-space, allocate a proxy surface the width of which is based on the framebuffer pitch rather than on the framebuffer width. Cc: <stable@vger.kernel.org> Reported-by:
Raphael Hertzog <buxy@kali.org> Tested-by:
Mati Aharoni <muts@kali.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module would unconditionally throw a bug when checking for a held spinlock in the command buffer code. Fix this by using a lockdep check. Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp> Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Arnd Bergmann authored
The new debugfs initialization code fails to build when CONFIG_DEBUG_FS is disabled: In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0: drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init': drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted nouveau_debugfs_init(struct nouveau_drm *) This fixes the prototypes so we can build it again. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs") Signed-off-by:
-
Karol Herbst authored
v2: remove unneeded pci check Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more misc things for radeon and amdgpu for 4.5: - TTM fixes for imported buffers - amdgpu fixes to avoid -ENOMEM in CS ioctl - CZ UVD and VCE clock force options for debugging video issues - A couple of ACP prerequisites - Misc fixes * 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/amdgpu: add irq domain support drm/amdgpu/cgs: add an interface to access PCI resources
-
Christian König authored
Most VM BOs end up in the duplicates list, validate it first make -ENOMEM less likely. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <David1.Zhou@amd.com> Signed-off-by:
-
Christian König authored
This makes it less likely to run into an ENOMEM because VM page tables are evicted last. v2: move the BOs in the LRU tail after validation Signed-off-by:
-
Christian König authored
This allows the drivers to move a BO to the end of the LRU without removing and adding it again. v2: Make it more robust, handle pinned and swapable BOs as well. Reviewed-by:
-
Christian König authored
It doesn't make any sense to try to swap out imported BOs. Reviewed-by:
-
Christian König authored
If we import a BO with an external reservation object we don't reserve/unreserve it. So we never add it to the LRU causing a possible denial of service. v2: fix typo in commit message Reviewed-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
-
Alex Deucher authored
Reviewed-by:
-
Alex Deucher authored
Reviewed-by:
-
Alex Deucher authored
VCE DPM works similarly to SCLK DPM. Add a similar interface for VCE for forcing the VCE clocks. Reviewed-by:
-
Alex Deucher authored
UVD DPM works similarly to SCLK DPM. Add a similar interface for UVD for forcing the UVD clocks. Reviewed-by:
-
Chunming Zhou authored
when scheduler is enabled, the semaphore isn't used at all. Signed-off-by:
-
Rex Zhu authored
The return value should be either negative or zero, no positive. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Link: http://patchwork.freedesktop.org/patch/msgid/3fea991541fbfc4ffece2c174adeb02cb9436c90.1452696179.git.geliangtang@163.comSigned-off-by:
-
Daniel Vetter authored
Since commit ac9b8236 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Nov 27 18:55:26 2015 +0200 drm/i915: Introduce a gmbus power domain gmbus also needs the power domain infrastructure right from the start, since as soon as we register the i2c controllers someone can use them. v2: Adjust cleanup paths too (Chris). v3: Rebase onto -nightly (totally bogus tree I had lying around) and also move dpio init head (Ville). v4: Ville instead suggested to move gmbus setup later in the sequence, since it's only needed by the modeset code. v5: Move even close to the actual user, right next to the comment that states where we really need gmbus (and interrupts!). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: ac9b8236 ("drm/i915: Introduce a gmbus power domain") Cc: stable@vger.kernel.org References: http://www.spinics.net/lists/intel-gfx/msg83075.htmlSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452682528-19437-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by:
-
Thierry Reding authored
An encoder is associated with a connector by the DRM core as a result of setting up a configuration. Drivers using the atomic or legacy helpers should never set up this link, even if it is a static one. While at it, try to catch this kind of error in the future by adding a WARN_ON() in drm_mode_connector_attach_encoder(). Note that this doesn't cover all the cases, since drivers could set this up after attaching. Drivers that use the atomic helpers will get a warning later on, though, so hopefully the two combined cover enough to help people avoid this in the future. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark yao <mark.yao@rock-chips.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Michel Thierry authored
Kernel and userspace are able to handle 4GB (1<<32) address space range, but "A32 Stateless Model" is not. According to documentation, A32 accesses are based on General State Base Address and bound checking is in place. Because size field (instruction State Base Address) limitation, it is not possible to address full 4GB memory region. A32 Stateless Model is used by some libraries and without this patch, the last page of 4GB address space is not accessible in 32bit processes. Reported-by:
Artur Harasimiuk <artur.harasimiuk@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452512367-23614-1-git-send-email-michel.thierry@intel.com Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Maarten Lankhorst authored
This fixes a spurious warning from an integer overflow on 64-bits systems. The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1. Explicitly handling this by casting to lret fixes it. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-and-tested-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Andreas Reis <andreas.reis@gmail.com> Reviewed-by:
-
Lyude authored
This fixes reprobing of display connectors on resume. After some talking with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does actually trigger a full reprobe of each connector's status. It turns out this is the actual reason reprobing on resume hasn't been working (this was observed on a T440s): - We call hpd_init() - We check each connector for a couple of things before marking connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an active encoder. Of course, a disconnected port won't have an active encoder, so we don't add the flag to any of the connectors. - We call drm_helper_hpd_irq_event() - drm_helper_irq_event() checks each connector for the DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1, so we skip reprobing each connector except that one. In addition, we also now avoid setting connector->polled to DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled by the mst helpers. This is probably what was originally intended to happen here. Changes since V1: * Use the explanation of the issue as the commit message instead * Change the title of the commit, since this does more then just stop a check for an encoder now * Add "Fixes" line for the patch that introduced this regression * Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors Changes since V2: * Put patch changelog above Signed-off-by * Follow Daniel Vetter's suggestion for making the code here a bit more legible Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: stable@vger.kernel.org Signed-off-by:
Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452181408-14777-1-git-send-email-cpaul@redhat.comSigned-off-by:
-
Jani Nikula authored
We still keep getting [ 4.249930] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)! This reverts commit 820da7ae Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 25 16:47:23 2015 +0200 Revert "drm/i915: shut up gen8+ SDE irq dmesg noise" which in itself is a revert, so this is just doing commit 97e5ed11 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 23 10:56:12 2015 +0200 drm/i915: shut up gen8+ SDE irq dmesg noise all over again. I'll stop pretending I understand what's going on like I did when I thought I'd fixed this for good in commit 6a39d7c9 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 25 16:47:22 2015 +0200 drm/i915: fix the SDE irq dmesg warnings properly Reported-by:
-
Chris Wilson authored
Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by:
-
