- 29 Nov, 2010 30 commits
-
-
Sven Eckelmann authored
The hash implementation is a complete implementation of a hash using buckets as hash entries and overflow buckets attached to them. The kernel already provides datastructures hlist_head and hlist_node which can be used to implement an hash using lists as hash buckets. So it is better to implement heavily used functionality on top of those instead of providing a full hash implementation. The rewrite changes the behavior of some functions slightly: * hash_add add elements to the front instead of the tail * hash_iterate doesn't provide pointer to access bucket->data directly, but it can be accessed using hlist_entry Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sven Eckelmann authored
hash_iterate is next to the function pointers the most called function related to hashes which benefits from inlining as it is uses in loops. Reported-by:
-
Sven Eckelmann authored
To enable inlining of the function pointers hashdata_choose_cb, hashdata_choose_cb and hashdata_free_cb, also the hash functions which uses them must be inlined by the called function. This should increase the performance, but also increases the size of the generated machine code slightly. Reported-by:
-
Sven Eckelmann authored
Function pointers cannot be inlined by a compiler and thus always has the overhead of an call. hashdata_choose_cb's are one of the most often called function pointers and its overhead must kept relative low. As first step, every function which uses this function pointer takes it as parameter instead of storing it inside the hash abstraction structure. This not generate any performance gain right now. The called functions must also be able to be inlined by the calling functions to enable inlining of the function pointer. Reported-by:
-
Sven Eckelmann authored
Function pointers cannot be inlined by a compiler and thus always has the overhead of an call. hashdata_compare_cb's are one of the most often called function pointers and its overhead must kept relative low. As first step, every function which uses this function pointer takes it as parameter instead of storing it inside the hash abstraction structure. This not generate any performance gain right now. The called functions must also be able to be inlined by the calling functions to enable inlining of the function pointer. Reported-by:
-
Linus Lüssing authored
When having a mixed topology of both very mobile and rather static nodes, you are usually best advised to set the originator interval on all nodes to a level best suited for the most mobile node. However, if most of the nodes are rather static, this can create a lot of undesired overhead as a trade-off then. If setting the interval too low on the static nodes, a mobile node might be chosen as a router for too long, not switching away from it fast enough because of its mobility and the low frequency of ogms of static nodes. Exposing the hop_penalty is especially useful for the stated scenario: A static node can keep the default originator interval, a mobile node can select a quicker one resulting in faster route updates towards this mobile node. Additionally, such a mobile node could select a higher hop penalty (or even set it to 255 to disable acting as a router for other nodes) to make it less desirable, letting other nodes avoid selecting this mobile node as a router. Signed-off-by:
Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by:
-
Linus Lüssing authored
We actually do not need an extra struct device variable, therefore replacing them with defines that directly get the bat_priv or net_device. This further reduces the code size in bat_sysfs.c and especially shortens some macros. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Linus Lüssing authored
Sysfs configuration options that just took a boolean value (enable(d)/disable(d)/0/1) and integer setting basically all had the same structure. To avoid even more copy and pasting in the future and to make introducing new configuration parameters for batman-adv simpler, more generic wrapper functions are being introduced with this commit. They can deal with boolean and unsigned integer parameters, storing them in the specified atomic_t variables. Signed-off-by:
-
Linus Lüssing authored
Both sysfs entries and variable names shall be as descriptive as possible while not exceeding a certain length. This patch renames bat_priv atomics to be equally descriptive with their according sysfs entries. Unifying sysfs and bat_priv atomic names also makes it easier to find each others pendant. The reduced ("type"-)information which was previously indicated with a _enabled for booleans got substituted by a comment in bat_priv. This patch has also been done in regards for the future BAT_ATTR_* macros (they only need one name argument instead of a file and variable name). Signed-off-by:Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Marek Lindner authored
By connecting multiple batman-adv mesh nodes to the same ethernet segment a loop can be created when the soft-interface is bridged into that ethernet segment. A simple visualization of the loop involving the most common case - a LAN as ethernet segment: node1 <-- LAN --> node2 | | wifi <-- mesh --> wifi Packets from the LAN (e.g. ARP broadcasts) will circle forever from node1 or node2 over the mesh back into the LAN. This patch adds the functionality to detect other batman-adv nodes connected to the LAN and select a 'gateway' to talk to the non-batman-adv devices on this LAN. All traffic from and to the mesh will be handled by this gateway to avoid the loop. OGMs received via the soft-interface are interpreted as 'port announcements' to locate potential batman-adv nodes. The patch can also deal with vlans on top of batX and offers a list of LAN neighbors via debugfs. Signed-off-by:
-
Andreas Langer authored
Signed-off-by:
Andreas Langer <an.langer@gmx.de> Signed-off-by:
-
Andreas Langer authored
If a packet is too big to be forwarded over an interface it will be fragmented on-the-fly (if fragmentation is enabled). Signed-off-by:
-
Andreas Langer authored
Callers should check the if the received packet is for us before it calls route_unicast_packet. Signed-off-by:
-
Andreas Langer authored
Signed-off-by:
-
Andreas Langer authored
Signed-off-by:
-
Andreas Langer authored
The unicast_frag_send_skb() function expected 'raw' packets (without any batman-adv header) to fragment them. This needs to be changed, so that this function is able to fragment packets that already traveled inside the mesh but need to be fragmented now. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Sven Eckelmann authored
We call a lot of the netdevice code when holding if_list_lock which will spin the whole time. This is not necessary because we only want to protect the access to the list to be serialized. An extra queue can be used which hold all interfaces which should be removed and then use that queue without any locks for netdevice cleanup. Reported-by:
Rafal Lesniak <lesniak@eresi-project.org> Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Marek Lindner authored
eth_type_trans tries to pull data with the length of the ethernet header from the skb. We only ensured that enough data for the first ethernet header and the batman header is available in non-paged memory of the skb and not for the ethernet after the batman header. eth_type_trans would fail sometimes with drivers which don't ensure that all there data is perfectly linearised. Reported-by:
-
Sven Eckelmann authored
Andrew Lunn didn't submit patches to staging since a while and may not be the right person for new patches. Signed-off-by:
-
Michael Hennerich authored
Remove unused sign member from chip specific information structure Fix typos Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Michael Hennerich authored
Initial support for single channel, 12-/14-/16-Bit nanoDAC with On-Chip Reference staging: iio: dac: ad5446: Fix according to review feedback Review feedback by Jonathan Cameron: Use kernel doc style to document headers. Turn data into a union Add some comments for clarity Signed-off-by:
-
Jonathan Cameron authored
Change to capital syntax for documetation e.g. 'inX-inY_raw' Use multiple 'What:' entries rather than wild cards or options so as to make the documentation clearer and easier to search. Some trivial spelling fixes. Signed-off-by:
-
Jonathan Cameron authored
Unusual element is addition of 'negate' and 'axis' platform data to ensure we support all the functionality of the adis16255 driver currently in staging. Signed-off-by:
Matthias Brugger <mensch0815@gmail.com> Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Michael Hennerich authored
Enable support for AD7887: SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC staging: iio: adc: Fix according to review feedback Review feedback by Jonathan Cameron: Combine statements. Document struct members. Remove redundant variable initialization. Simplify multichannel scan from ring logic. Fix coding style. [v2] staging: iio: adc: ad7887: Fix typos Signed-off-by:
-
Michael Hennerich authored
Enable support for AD5444 and AD5446: 12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface. staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors staging: iio: dac: Fix according to review feedback Review feedback by Jonathan Cameron: Remove spurious new line. Document struct members. Remove redundant variable initialization. Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
- 20 Nov, 2010 10 commits
-
-
Vinod Koul authored
scu ipc driver fails sometimes to read/write. This add logs with register addr and ret code when these errors occur. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Vinod Koul authored
To avoid mismatch in driver and firmware error codes assign specfic values to each enum. Signed-off-by:
-
Vinod Koul authored
The PCM interface in SST driver is cmds only, this patch changes the interface to open, close and cmd interface. This allows SST driver to keep easy track of handles open Signed-off-by:
-
Mark Allyn authored
This driver is for the Security Processor, a dedicated encryption and decryption driver that is used on the Intel mobile platform. This has been checked with checkpatch and there are four warnings for lines over 80 charactors. There is one compile warning. This is for a function that is only used if the rar register driver is needed. There is an ifdef in a header file that stubs out the rar register driver if the rar register is not configured. This driver does add a configuration, which is CONFIG_DX_SEP. Signed-off-by:
Mark Allyn <mark.a.allyn@intel.com> Signed-off-by:
-
Randy Dunlap authored
clearpad_tm1217 driver uses many input_() interfaces, so it should depend on INPUT. clearpad_tm1217.c:(.text+0xf19ac): undefined reference to `input_unregister_device' clearpad_tm1217.c:(.text+0xf1b19): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1b31): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1bb4): undefined reference to `input_event' clearpad_tm1217.c:(.text+0xf1bf2): undefined reference to `input_event' drivers/built-in.o:clearpad_tm1217.c:(.text+0xf1c08): more undefined references to `input_event' follow clearpad_tm1217.c:(.text+0xf1df3): undefined reference to `input_allocate_device' clearpad_tm1217.c:(.text+0xf1eac): undefined reference to `input_set_abs_params' clearpad_tm1217.c:(.text+0xf1ed1): undefined reference to `input_set_abs_params' clearpad_tm1217.c:(.text+0xf1ed8): undefined reference to `input_register_device' clearpad_tm1217.c:(.text+0xf2040): undefined reference to `input_unregister_device' clearpad_tm1217.c:(.text+0xf204b): undefined reference to `input_free_device' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Ramesh Agarwal <ramesh.agarwal@intel.com> Signed-off-by:
-
Marek Belisko authored
This patch fix following warning: drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:67:22: warning: ‘pft1000info’ may be used uninitialized in this function Signed-off-by:
Marek Belisko <marek.belisko@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Stick to the 80 character line limit at least for code Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Remove depreciated macro from header Signed-off-by:
-
