- 17 Mar, 2024 2 commits
-
-
Ian Murphy authored
Keyboard has an LED that is ON/OFF when mic is muted/active - LED is controlled by GPIO pin - Patch enables led to appear in /sys/class/leds/ as hda::micmute - Enables LED when mic is MUTED - Disables LED when mic is active [ fixed white spaces by tiwai ] Signed-off-by:
Ian Murphy <iano200@gmail.com> Message-ID: <20240316094157.13890-1-iano200@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This reverts commit 1601cd53. This fix is applied globally to all devices, and it may change the existing control names. When the devices are managed with the fixed configuration like UCM, such control name mismatch may lead to significant regressions. For avoiding that kind of regression, we would need to apply such changes conditionally, but it'd take time to settle down. While the original fix is a good thing in general, in order to address the regression, let's revert the change for now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605Reported-and-tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Message-ID: <20240316083744.28126-1-tiwai@suse.de> Signed-off-by:
-
- 15 Mar, 2024 2 commits
-
-
Takashi Iwai authored
The conversion to guard macro dropped the irq-disablement at closing mistakenly, which may lead to a race. Fix it. Fixes: beb45974 ("ALSA: timer: Use guard() for locking") Reported-by: syzbot+28c1a5a5b041a754b947@syzkaller.appspotmail.com Closes: http://lore.kernel.org/r/0000000000000b9a510613b0145f@google.com Message-ID: <20240315101447.18395-1-tiwai@suse.de> Signed-off-by:
-
Jichi Zhang authored
The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations such as the 14IAP7, and the bass speakers can be fixed using similar methods with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated separately. Signed-off-by:
Jichi Zhang <i@jichi.ca> Message-ID: <20240315081954.45470-3-i@jichi.ca> Signed-off-by:
-
- 13 Mar, 2024 3 commits
-
-
Johan Carlsson authored
If a usb audio device sets more bits than the amount of channels it could write outside of the map array. Signed-off-by:
Johan Carlsson <johan.carlsson@teenage.engineering> Fixes: 04324ccc ("ALSA: usb-audio: add channel map support") Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering> Signed-off-by:
-
Pierre-Louis Bossart authored
The runtime_pm handling seems to have been loosely inspired by the cs32l41 driver, but in this case the get_noresume/put sequence is not required. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Message-ID: <20240312161217.79510-1-pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Valentine Altair authored
Some HP laptops have received revisions that altered their board IDs and therefore the current patches/quirks do not apply to them. Specifically, for my Probook 440 G8, I have a board ID of 8a74. It is necessary to add a line for that specific model. Signed-off-by:
Valentine Altair <faetalize@proton.me> Cc: <stable@vger.kernel.org> Message-ID: <kOqXRBcxkKt6m5kciSDCkGqMORZi_HB3ZVPTX5sD3W1pKxt83Pf-WiQ1V1pgKKI8pYr4oGvsujt3vk2zsCE-DDtnUADFG6NGBlS5N3U4xgA=@proton.me> Signed-off-by:
-
- 12 Mar, 2024 1 commit
-
-
Thomas Weißschuh authored
The variable aaci is not used anymore and can be deleted. Fixes: 792a6c51 ("[ALSA] Fix PM support") Signed-off-by:
Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://lore.kernel.org/r/20240312-aaci-unused-v1-1-09be643f67c2@linutronix.deSigned-off-by:
-
- 11 Mar, 2024 12 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.9 This has been quite a small release, there's a lot of driver specific cleanups and minor enhancements but hardly anything on the core and only one new driver. Highlights include: - SoundWire support for AMD ACP 6.3 systems. - Support for reporting version information for AVS firmware. - Support DSPless mode for Intel Soundwire systems. - Support for configuring CS35L56 amplifiers using EFI calibration data. - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
-
Geoffrey D. Bennett authored
The 4th Gen input preamp gain range is 0dB to +69dB, although the control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV again. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Fixes: a45cf0a0 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range") Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu> Signed-off-by:
-
Geoffrey D. Bennett authored
The input gain range TLV was declared as -70dB to 0dB, but the preamp gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to SCARLETT2_MAX_GAIN and update the TLV to fix. Signed-off-by:
-
Geoffrey D. Bennett authored
The meanings of the raw_auto_gain_status values were originally guessed through experimentation, but the official names have now been discovered. Update the autogain status control strings accordingly. Signed-off-by:
-
Geoffrey D. Bennett authored
The value currently being read to determine the low-voltage state is actually the front panel state. Fix the code to use the correct offset for the low-voltage state. Signed-off-by:
-
Gergo Koteles authored
After system_resume the amplifers will remain off, even if they were on before system_suspend. Use playback_started bool to save the playback state, and restore power state based on it. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
Gergo Koteles <soyer@irl.hu> Signed-off-by:
-
Gergo Koteles authored
The runtime_resume function calls prmg_load and apply_calibration functions, but system_resume also calls them, so calling pm_runtime_force_resume before reset is unnecessary. For consistency, do not call the pm_runtime_force_suspend in system_suspend, as runtime_suspend does the same. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
-
Gergo Koteles authored
The amplifier doesn't loose register state in software shutdown mode, so there is no need to reset the cur_* values. Without these resets, the amplifier can be turned on after runtime_suspend without waiting for the program and profile to be restored. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
-
Gergo Koteles authored
Add the missing lock around tasdevice_tuning_switch(). Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
-
Gergo Koteles authored
The system_resume function uses dev_info for tracing, but the other pm functions use dev_dbg. Use dev_dbg as the other pm functions. Fixes: 5be27f1e ("ALSA: hda/tas2781: Add tas2781 HDA driver") Signed-off-by:
-
Athaariq Ardhiansyah authored
Realtek codec on HP Envy laptop series are heavily modified by vendor. Therefore, need intervention to make it work properly. The patch fixes: - B&O soundbar speakers (between lid and keyboard) activation - Enable LED on mute button - Add missing process coefficient which affects the output amplifier - Volume control synchronization between B&O soundbar and side speakers - Unmute headset output on several HP Envy models - Auto-enable headset mic when plugged This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285 The only unsolved problem is output amplifier of all built-in speakers is too weak, which causes volume of built-in speakers cannot be loud as vendor's proprietary driver due to missing _DSD parameter in the firmware. The solution is currently on research. Expected to has another patch in the future. Potential fix to related issues, need test before close those issues: - https://bugzilla.kernel.org/show_bug.cgi?id=189331 - https://bugzilla.kernel.org/show_bug.cgi?id=216632 - https://bugzilla.kernel.org/show_bug.cgi?id=216311 - https://bugzilla.kernel.org/show_bug.cgi?id=213507Signed-off-by:
Athaariq Ardhiansyah <foss@athaariq.my.id> Message-ID: <20240310140249.3695-1-foss@athaariq.my.id> Signed-off-by:
-
Takashi Iwai authored
Prep for 6.9 merge. Signed-off-by:
-
- 08 Mar, 2024 4 commits
-
-
Simon Trimmer authored
Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57 Boosted Smart Amplifiers. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
-
Simon Trimmer authored
Add the HID for the CS35L54 and CS35L57 Boosted Smart Amplifiers. These have the same control interface as the CS35L56 so are handled by the cs35l56-hda driver. Signed-off-by:
-
Simon Trimmer authored
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire control and audio. The hardware differences between L54, L56 and L57 do not affect the driver control interface so they can all be handled by the same driver. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.8-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.8 Some more driver specific fixes for v6.8, plus one new x86 platform quirk. All good fixes to have if you have systems that use the relevant hardware.
-
- 07 Mar, 2024 8 commits
-
-
Andy Shevchenko authored
PM constants for PCI devices are defined with bitwise annotation. When used as is, sparse complains about that: .../catpt/dsp.c:390:9: warning: restricted pci_power_t degrades to integer .../catpt/dsp.c:414:9: warning: restricted pci_power_t degrades to integer Force them to be u32 in the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://msgid.link/r/20240307163734.3852754-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Richard Fitzgerald authored
hda_component.h uses hda_codec_dev from sound/hda_codec.h. Include sound/hda_codec.h instead of assuming that it has already been included by the parent .c file. This isn't causing any problems with current code, so no need to backport to older kernels. Signed-off-by:
-
Richard Fitzgerald authored
Add the conventional include guards around the content of the hda_component.h header file. This prevents double-declaration of struct hda_component if the header gets included multiple times. This isn't causing any problems with current code, so no need to backport to older kernels. Signed-off-by:
-
Mark Brown authored
Merge series from Zhang Yi <zhangyi@everest-semi.com>: We found that using 0x45 as the default value for interrupt-clk would cause a headset detection error.So we took 0x00 as the default value for interrupt-clk and passed the test. We removed mic1-src and mic2-src, which were not used.
-
Richard Fitzgerald authored
The kerneldoc for struct cs_dsp refers to a fw_file_name member but there's no such member. Signed-off-by:
-
Richard Fitzgerald authored
Initialize debugfs_root to -ENODEV so that if the client never sets a valid debugfs root the debugfs files will not be created. A NULL pointer passed to any of the debugfs_create_*() functions means "create in the root of debugfs". It doesn't mean "ignore". Signed-off-by:
-
Zhang Yi authored
Removed mic1-src and mic2-src. and changed default value of interrupt-clk Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://msgid.link/r/20240307051222.24010-3-zhangyi@everest-semi.comSigned-off-by:
-
Zhang Yi authored
We don't use mic1_src and mic2_src.so we delete these two members. We changed the default value of interrupt-clk for headphone detection Signed-off-by:
-
- 06 Mar, 2024 5 commits
-
-
Stuart Henderson authored
Use source instead of ret, which seems to be unrelated and will always be zero. Signed-off-by:
Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.comSigned-off-by:
-
Stuart Henderson authored
Signed-off-by:
-
Stuart Henderson authored
Signed-off-by:
-
Luca Ceresoli authored
Add the event value to the snd_soc_dapm_start and snd_soc_dapm_done trace events to make them more informative. Trace before: aplay-229 [000] 250.140309: snd_soc_dapm_start: card=vscn-2046 aplay-229 [000] 250.167531: snd_soc_dapm_done: card=vscn-2046 aplay-229 [000] 251.169588: snd_soc_dapm_start: card=vscn-2046 aplay-229 [000] 251.195245: snd_soc_dapm_done: card=vscn-2046 Trace after: aplay-214 [000] 693.290612: snd_soc_dapm_start: card=vscn-2046 event=1 aplay-214 [000] 693.315508: snd_soc_dapm_done: card=vscn-2046 event=1 aplay-214 [000] 694.537349: snd_soc_dapm_start: card=vscn-2046 event=2 aplay-214 [000] 694.563241: snd_soc_dapm_done: card=vscn-2046 event=2 Signed-off-by:Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://msgid.link/r/20240306-improve-asoc-trace-events-v1-2-edb252bbeb10@bootlin.comSigned-off-by:
-
Luca Ceresoli authored
The snd_soc_bias_level_start and snd_soc_bias_level_done trace events currently look like: aplay-229 [000] 1250.140778: snd_soc_bias_level_start: card=vscn-2046 val=1 aplay-229 [000] 1250.140784: snd_soc_bias_level_done: card=vscn-2046 val=1 aplay-229 [000] 1250.140786: snd_soc_bias_level_start: card=vscn-2046 val=2 aplay-229 [000] 1250.140788: snd_soc_bias_level_done: card=vscn-2046 val=2 kworker/u8:1-21 [000] 1250.140871: snd_soc_bias_level_start: card=vscn-2046 val=1 kworker/u8:0-11 [000] 1250.140951: snd_soc_bias_level_start: card=vscn-2046 val=1 kworker/u8:0-11 [000] 1250.140956: snd_soc_bias_level_done: card=vscn-2046 val=1 kworker/u8:0-11 [000] 1250.140959: snd_soc_bias_level_start: card=vscn-2046 val=2 kworker/u8:0-11 [000] 1250.140961: snd_soc_bias_level_done: card=vscn-2046 val=2 kworker/u8:1-21 [000] 1250.167219: snd_soc_bias_level_done: card=vscn-2046 val=1 kworker/u8:1-21 [000] 1250.167222: snd_soc_bias_level_start: card=vscn-2046 val=2 kworker/u8:1-21 [000] 1250.167232: snd_soc_bias_level_done: card=vscn-2046 val=2 kworker/u8:0-11 [000] 1250.167440: snd_soc_bias_level_start: card=vscn-2046 val=3 kworker/u8:0-11 [000] 1250.167444: snd_soc_bias_level_done: card=vscn-2046 val=3 kworker/u8:1-21 [000] 1250.167497: snd_soc_bias_level_start: card=vscn-2046 val=3 kworker/u8:1-21 [000] 1250.167506: snd_soc_bias_level_done: card=vscn-2046 val=3 There are clearly multiple calls, one per component, but they cannot be discriminated from each other. Change the ftrace events to also print the component name, to make it clear which part of the code is involved. This requires changing the passed value from a struct snd_soc_card, where the DAPM context is not kwown, to a struct snd_soc_dapm_context where it is obviously known but the a card pointer is also available. With this change, the resulting trace becomes: aplay-247 [000] 1436.357332: snd_soc_bias_level_start: card=vscn-2046 component=(none) val=1 aplay-247 [000] 1436.357338: snd_soc_bias_level_done: card=vscn-2046 component=(none) val=1 aplay-247 [000] 1436.357340: snd_soc_bias_level_start: card=vscn-2046 component=(none) val=2 aplay-247 [000] 1436.357343: snd_soc_bias_level_done: card=vscn-2046 component=(none) val=2 kworker/u8:4-215 [000] 1436.357437: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=1 kworker/u8:5-231 [000] 1436.357518: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=1 kworker/u8:5-231 [000] 1436.357523: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=1 kworker/u8:5-231 [000] 1436.357526: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=2 kworker/u8:5-231 [000] 1436.357528: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=2 kworker/u8:4-215 [000] 1436.383217: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=1 kworker/u8:4-215 [000] 1436.383221: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=2 kworker/u8:4-215 [000] 1436.383231: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=2 kworker/u8:5-231 [000] 1436.383468: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=3 kworker/u8:5-231 [000] 1436.383472: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=3 kworker/u8:4-215 [000] 1436.383503: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=3 kworker/u8:4-215 [000] 1436.383513: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=3 Signed-off-by:
-
- 05 Mar, 2024 3 commits
-
-
Javier García authored
Convert the RT1015 Mono Class D Audio Amplifier to DT schema. Signed-off-by:
Javier García <javier.gar.tab@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://msgid.link/r/20240304142315.14522-1-javier.gar.tab@gmail.comSigned-off-by:
-
Andy Shevchenko authored
intel-mid.h is providing some core parts of the South Complex PM, which are usually are not used by individual drivers. In particular, this driver doesn't use it, so simply remove the unused header. Signed-off-by:
-
Rob Herring authored
The documented vendor prefix for LG Electronics is 'lg' not 'lge'. Just change the example to 'lg' as there doesn't appear to be any dependency on the existing compatible string. Signed-off-by:
-
