- 03 Mar, 2016 40 commits
-
-
Christian Borntraeger authored
commit d7444794 upstream. In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 50ab8ec7 upstream. See http: //www.infradead.org/rpr.html X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org Content-Transfer-Encoding: 8bit Mime-Version: 1.0 We support OFFSET_MAX just fine, so don't round down below it. Also switch to using min_t to make the helper more readable. Signed-off-by:
Christoph Hellwig <hch@lst.de> Fixes: 433c9237 ("NFS: Clean up nfs_size_to_loff_t()") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 4ae2182b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tejun Heo authored
commit 8eee1d3e upstream. The bulk of ATA host state machine is implemented by ata_sff_hsm_move(). The function is called from either the interrupt handler or, if polling, a work item. Unlike from the interrupt path, the polling path calls the function without holding the host lock and ata_sff_hsm_move() selectively grabs the lock. This is completely broken. If an IRQ triggers while polling is in progress, the two can easily race and end up accessing the hardware and updating state machine state at the same time. This can put the state machine in an illegal state and lead to a crash like the following. kernel BUG at drivers/ata/libata-sff.c:1302! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000 RIP: 0010:[<ffffffff83a83409>] [<ffffffff83a83409>] ata_sff_hsm_move+0x619/0x1c60 ... Call Trace: <IRQ> [<ffffffff83a84c31>] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584 [<ffffffff83a85611>] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877 [< inline >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629 [<ffffffff83a85bf3>] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902 [<ffffffff81479f98>] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157 [<ffffffff8147a717>] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205 [<ffffffff81484573>] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623 [< inline >] generic_handle_irq_desc include/linux/irqdesc.h:146 [<ffffffff811a92bc>] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78 [<ffffffff811a7e4d>] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240 [<ffffffff86653d4c>] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520 <EOI> [< inline >] rcu_lock_acquire include/linux/rcupdate.h:490 [< inline >] rcu_read_lock include/linux/rcupdate.h:874 [<ffffffff8164b4a1>] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145 [< inline >] do_fault_around mm/memory.c:2943 [< inline >] do_read_fault mm/memory.c:2962 [< inline >] do_fault mm/memory.c:3133 [< inline >] handle_pte_fault mm/memory.c:3308 [< inline >] __handle_mm_fault mm/memory.c:3418 [<ffffffff816efb16>] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447 [<ffffffff8127dc16>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238 [<ffffffff8127e358>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331 [<ffffffff8126f514>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264 [<ffffffff86655578>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986 Fix it by ensuring that the polling path is holding the host lock before entering ata_sff_hsm_move() so that all hardware accesses and state updates are performed under the host lock. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.comSigned-off-by:
-
Tejun Heo authored
commit 041bd12e upstream. This reverts commit 874bbfe6. Workqueue used to implicity guarantee that work items queued without explicit CPU specified are put on the local CPU. Recent changes in timer broke the guarantee and led to vmstat breakage which was fixed by 176bed1d ("vmstat: explicitly schedule per-cpu work on the CPU we need it to run on"). vmstat is the most likely to expose the issue and it's quite possible that there are other similar problems which are a lot more difficult to trigger. As a preventive measure, 874bbfe6 ("workqueue: make sure delayed work run in local cpu") was applied to restore the local CPU guarnatee. Unfortunately, the change exposed a bug in timer code which got fixed by 22b886dd ("timers: Use proper base migration in add_timer_on()"). Due to code restructuring, the commit couldn't be backported beyond certain point and stable kernels which only had 874bbfe6 started crashing. The local CPU guarantee was accidental more than anything else and we want to get rid of it anyway. As, with the vmstat case fixed, 874bbfe6 is causing more problems than it's fixing, it has been decided to take the chance and officially break the guarantee by reverting the commit. A debug feature will be added to force foreign CPU assignment to expose cases relying on the guarantee and fixes for the individual cases will be backported to stable as necessary. Signed-off-by:
-
Johannes Berg authored
commit 6736fde9 upstream. The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Fixes: c64fb016 ("rfkill: create useful userspace interface") Reported-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Oliver Neukum authored
commit e912e685 upstream. This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ilya Dryomov authored
commit e7a88e82 upstream. The contract between try_read() and try_write() is that when called each processes as much data as possible. When instructed by osd_client to skip a message, try_read() is violating this contract by returning after receiving and discarding a single message instead of checking for more. try_write() then gets a chance to write out more requests, generating more replies/skips for try_read() to handle, forcing the messenger into a starvation loop. Reported-by:
Varada Kari <Varada.Kari@sandisk.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Mike Marciniszyn authored
commit 09dc9cd6 upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Rasmus Villemoes authored
commit bc3f5d8c upstream. We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Alex Deucher authored
commit 0eb1c3d4 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by:
-
Rob Clark authored
commit 96c5d076 upstream. Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dmitry V. Levin authored
commit 525fd5a9 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Linus Walleij authored
commit 0bcb7efd upstream. commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Richard Cochran authored
commit 1b9f2372 upstream. The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by:
Markus Elfring <elfring@users.sourceforge.net> igned-off-by:
Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mikulas Patocka authored
commit 385277bf upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit e8beb023 upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Antonio Ospite authored
commit dcc7fdbe upstream. v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Malcolm Priestley authored
commit c9d57de6 upstream. When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Vegard Nossum authored
commit 9f2dfda2 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vegard Nossum authored
commit 0754fb29 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by:
-
Stefan Haberland authored
commit 9d862aba upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 020bf042 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by:
-
Ard Biesheuvel authored
commit bcb7825a upstream. The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb3 ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb3 ("s390/exceptions: switch to relative exception table entries") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Filipe Manana authored
commit 9269d12b upstream. We weren't accounting for the insertion of an inline extent item for the symlink inode nor that we need to update the parent inode item (through the call to btrfs_add_nondir()). So fix this by including two more transaction units. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
commit a879719b upstream. When a symlink is successfully created it always has an inline extent containing the source path. However if an error happens when creating the symlink, we can leave in the subvolume's tree a symlink inode without any such inline extent item - this happens if after btrfs_symlink() calls btrfs_end_transaction() and before it calls the inode eviction handler (through the final iput() call), the transaction gets committed and a crash happens before the eviction handler gets called, or if a snapshot of the subvolume is made before the eviction handler gets called. Sadly we can't just avoid this by making btrfs_symlink() call btrfs_end_transaction() after it calls the eviction handler, because the later can commit the current transaction before it removes any items from the subvolume tree (if it encounters ENOSPC errors while reserving space for removing all the items). So make send fail more gracefully, with an -EIO error, and print a message to dmesg/syslog informing that there's an empty symlink inode, so that the user can delete the empty symlink or do something else about it. Reported-by:
Stephen R. van den Berg <srb@cuci.nl> Signed-off-by:
-
Josef Bacik authored
commit be7bd730 upstream. We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
commit b2acdddf upstream. Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Russell King authored
commit dd39a265 upstream. recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.ukSigned-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
James Bottomley authored
commit 5e103356 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
James Bottomley authored
commit 3417c1b5 upstream. Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit b7bb1100 upstream. Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Signed-off-by:
-
Kirill A. Shutemov authored
commit 9f5bd308 upstream. There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Joe Thornber authored
commit ed8b45a3 upstream. If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit d98f1cd0 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by:
-
Sasha Levin authored
commit 119d6f6a upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oleg@redhat.com Fixes: 9067ac85 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mirza Krak authored
commit 7cecd9ab upstream. According to SJA1000 data sheet error-warning (EI) interrupt is not cleared by setting the controller in to reset-mode. Then if we have the following case: - system is suspended (echo mem > /sys/power/state) and SJA1000 is left in operating state - A bus error condition occurs which activates EI interrupt, system is still suspended which means EI interrupt will be not be handled nor cleared. If the above two events occur, on resume there is no way to return the SJA1000 to operating state, except to cycle power to it. By simply reading the IR register on start we will clear any previous conditions that could be present. Signed-off-by:
Mirza Krak <mirza.krak@hostmobility.com> Reported-by:
Christian Magnusson <Christian.Magnusson@semcon.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Quentin Casasnovas authored
commit 8c7188b2 upstream. Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb0 ("RDS: verify the underlying transport exists before creating a connection") Reviewed-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
-
Johannes Berg authored
commit c2e703a5 upstream. When using call_rcu(), the called function may be delayed quite significantly, and without a matching rcu_barrier() there's no way to be sure it has finished. Therefore, global state that could be gone/freed/reused should never be touched in the callback. Fix this in mesh by moving the atomic_dec() into the caller; that's not really a problem since we already unlinked the path and it will be destroyed anyway. This fixes a crash Jouni observed when running certain tests in a certain order, in which the mesh interface was torn down, the memory reused for a function pointer (work struct) and running that then crashed since the pointer had been decremented by 1, resulting in an invalid instruction byte stream. Fixes: eb2b9311 ("mac80211: mesh path table implementation") Reported-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
