- 24 Jun, 2017 26 commits
-
-
Binoy Jayan authored
The semaphore 'i2c_switch_mutex' is used as a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by:
Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Binoy Jayan authored
The semaphore 'stream_mutex' is used as a simple mutex, so it should be written as one. Also moving the mutex_[lock/unlock] to the caller as it is anyway locked at the beginning of the callee thus avoiding repetition. Signed-off-by:
-
Binoy Jayan authored
The semaphore 'cmd_mutex' is used as a simple mutex, so it should be written as one. Also, replace down with mutex_destroy to ensure sane state when ngene_stop is called. Signed-off-by:
-
Mauro Carvalho Chehab authored
As such macro will check if the expression is true, it may fall through, as warned: In file included from ./include/uapi/linux/stddef.h:1:0, from ./include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from ./include/uapi/linux/types.h:13, from ./include/linux/types.h:5, from ./drivers/media/dvb-core/dvb_frontend.h:35, from drivers/media/tuners/fc0011.h:4, from drivers/media/tuners/fc0011.c:20: drivers/media/tuners/fc0011.c: In function 'fc0011_set_params': ./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/asm-generic/bug.h:109:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ drivers/media/tuners/fc0011.c:344:3: note: in expansion of macro 'WARN_ON' WARN_ON(1); ^~~~~~~ drivers/media/tuners/fc0011.c:345:2: note: here case 0: ^~~~ In file included from ./include/uapi/linux/stddef.h:1:0, from ./include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from ./include/uapi/linux/types.h:13, from ./include/linux/types.h:5, from ./include/linux/list.h:4, from ./include/linux/module.h:9, from drivers/media/pci/tw5864/tw5864-video.c:17: drivers/media/pci/tw5864/tw5864-video.c: In function 'tw5864_fmt_vid_cap': ./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/asm-generic/bug.h:68:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ drivers/media/pci/tw5864/tw5864-video.c:547:3: note: in expansion of macro 'WARN_ON_ONCE' WARN_ON_ONCE(1); ^~~~~~~~~~~~ drivers/media/pci/tw5864/tw5864-video.c:548:2: note: here case STD_NTSC: ^~~~ On both cases, it means an error, so, let's return an error code, to make gcc happy. Signed-off-by:Michael Büsch <m@bues.ch> Signed-off-by:
-
Martin Kepplinger authored
DRX_S9TOS16 and DRX_S24TODRXFREQ are simply not used. Furthermore, sign_extend32() should be used for sign extension. (Also, the comment describing DRX_S24TODRXFREQ was wrong). So remove these macros. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Peter Ujfalusi authored
The dmaengine driver for sDMA now have support for interleaved transfer. This trasnfer type was open coded with the legacy omap-dma API, but now we can move it to dmaengine. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
While committing a change on em28xx, I got a warning of a typo there. So, fix it on em28xx and on two other media drivers with the same typo. Signed-off-by: -
Mauro Carvalho Chehab authored
There's a new version of Terratec H6 with uses USB ID 0ccd:10b2. This version is similar to the old one (with is supported via the HTC entry), except that this one has the eeprom on the second bus. On this board, one side of this board is labeled with: dvbc v2.0 The other side with: 94V-0, MO2, RK-4221 with huge digits: 1107 With those patches, the board is properly detected: em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0) em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class) em28xx 1-1.5:1.0: Video interface 0 found: isoc em28xx 1-1.5:1.0: DVB interface 0 found: isoc em28xx 1-1.5:1.0: chip ID is em2884 em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64 &........d.`...d em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 .`...".......... em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6 ..........F..".. em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef ".`..p..=..<.... em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe `..=..<......... em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02 .=.=p..<...".... em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03 ......g.......k. em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00 ."j...'WN.).`... em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00 ....^.....D..... em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00 [..... @ .. .... em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00 .@.............. em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03 ................ em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00 1.2.3.4.5.6.7.8. em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00 9.A.B.C.D...T.E. em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00 R.R.A.T.E.C.".T. em28xx 1-1.5:1.0: eeprom 000100: ... (skipped) em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf em28xx 1-1.5:1.0: EEPROM info: em28xx 1-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x00 em28xx 1-1.5:1.0: I2S audio, 5 sample rates em28xx 1-1.5:1.0: 500mA max power em28xx 1-1.5:1.0: Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286 em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101) em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model em28xx 1-1.5:1.0: dvb set to isoc mode. usbcore: registered new interface driver em28xx em28xx 1-1.5:1.0: Binding audio extension em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196 em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size em28xx 1-1.5:1.0: Audio extension successfully initialized em28xx: Registered (Em28xx Audio Extension) extension em28xx 1-1.5:1.0: Binding DVB extension drxk: status = 0x639260d9 drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz drxk: DRXK driver version 0.9.4300 drxk: frontend initialized. tda18271 4-0060: creating new instance tda18271: TDA18271HD/C2 detected @ 4-0060 dvbdev: DVB: registering new adapter (1-1.5:1.0) em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered. dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. em28xx 1-1.5:1.0: DVB extension successfully initialized em28xx: Registered (Em28xx dvb Extension) extension em28xx 1-1.5:1.0: Registering input extension rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0 Registered IR keymap rc-nec-terratec-cinergy-xs input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0 em28xx 1-1.5:1.0: Input extension successfully initalized em28xx: Registered (Em28xx Input Extension) extension tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete Signed-off-by: -
Mauro Carvalho Chehab authored
While testing support for Terratec H6 rev. 2, it was noticed that reading from eeprom there causes a timeout error. Apparently, this is due to the need of properly setting GPIOs. In any case, the driver doesn't really require eeprom reading to succeed, as this is currently used only for debug. So, Ignore such errors. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Dan Carpenter authored
Mostly this adds some unlocks to error paths. But, if you see where there were "break;" statements before, I changed those paths to return error codes instead of returning success. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This patch mostly adds unlocks to error paths. But one additional small change is that I made the first "break;" a "goto unlock;" which means that now we return failure instead of success on that path. Signed-off-by:
-
Gustavo A. R. Silva authored
Values assigned to variables Fmax and Fmin at lines 2740 and 2741 are overwritten at lines 2754 and 2755 before they can be used. This makes such variable assignments useless. Addresses-Coverity-ID: 1226952 Addresses-Coverity-ID: 1226953 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Avoid the following warning when building documentation: checking consistency... /devel/v4l/patchwork/Documentation/media/v4l-drivers/imx.rst:: WARNING: document isn't included in any toctree While here, avoid placing all driver authors at just one line at the html/pdf output. Acked-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
It is not trivial to implement the logic that collects DVBv5 statistics. As we're seein lately too many implementations that are not quite right when reviewing patchsets, add a detailed explanation, adding a few examples about the right thing to be done. Signed-off-by: -
Daniel Scheller authored
Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Side effect: KERN_DEBUG messages aren't written to the kernel log anymore. This also improves the tda18212_ping reporting a bit so users know that if pinging wasn't successful, bad things will happen. Since in module_init_ddbridge() there's no dev yet, pr_info is used instead. Signed-off-by:
-
Daniel Scheller authored
Reported by smatch: drivers/media/pci/ddbridge/ddbridge-core.c:1246 input_tasklet() warn: this loop depends on readl() succeeding drivers/media/pci/ddbridge/ddbridge-core.c:1768 flashio() warn: this loop depends on readl() succeeding drivers/media/pci/ddbridge/ddbridge-core.c:1788 flashio() warn: this loop depends on readl() succeeding Fix this by introducing safe_ddbreadl() which will wrap ddbreadl and checks for all bits set in the return which indicates failure, and return 0 in that case. Usable as drop-in-replacement in all affected while loops w/o having to change the logic. Signed-off-by:
-
Philipp Zabel authored
I would have liked the the picture run timeout error handler to be renamed to something a bit more descriptive in the original commit fb2be08f ("[media] coda: first step at error recovery"). Somehow v1 [1] was merged instead of v2 [2]. [1] https://patchwork.kernel.org/patch/9663965/ [2] https://patchwork.kernel.org/patch/9774239/Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Colin Ian King authored
The current pre-decrement is incorrect and should be replaced with a post-decrement. Consider the case where the very first clk_prepare_enable fails when i is 0; in this case the error clean up will decrement the unsigned int which wraps to the largest unsigned int value causing an array out of bounds read on core->clks[i]. Detected by CoverityScan, CID#1446590 ("Out-of-bounds read") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Check return value from call to core->write(), so in case of error print error message, jump to goto label fail and eventually return. Addresses-Coverity-ID: 1226943 Signed-off-by:
-
Arnd Bergmann authored
Back in April I created a patch to address a false-positive warning: drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_irq_work_handler': drivers/media/usb/rainshadow-cec/rainshadow-cec.c:171:31: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized] My patch was totally wrong and introduced a real bug, and Colin Ian King thankfully noticed it now and fixed my mistake. Unfortunately, fixing the actual uninitialized data in this case brought back the original bogus warning. This is a new version of the patch, which simplifies the code to the point where gcc notices the behavior is correct. Fixes: ca33784b ("[media] rainshadow-cec: ensure exit_loop is intialized") Fixes: ea6a69de ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning") Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Joe Perches authored
Commit 680d87c0 ("[media] tuner-core: use pr_foo, instead of internal printk macros") removed the use of PREFIX, remove the #define Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Convert STK_<LEVEL> to pr_<level> to use the typical kernel logging. Add a define for pr_fmt. No change in logging output. Miscellanea: o Remove now unused PREFIX and STK_<LEVEL> macros o Realign arguments o Use pr_<level>_ratelimited o Add a few missing newlines to formats Signed-off-by:
-
Philipp Zabel authored
This fixes a smatch warning: drivers/media/platform/coda/coda-bit.c:415 coda_alloc_framebuffers() error: we previously assumed 'ctx->codec' could be null (see line 396) coda_alloc_framebuffers() is called from coda_start_encoding() and __coda_start_decoding(). Both dereference ctx->codec before calling coda_alloc_framebuffers() in lines 935 and 1649, so ctx->codec can not be NULL. Signed-off-by: -
Arnd Bergmann authored
This one got applied twice, causing a build error with clang: drivers/media/i2c/et8ek8/et8ek8_driver.c:1499:1: error: redefinition of '__mod_of__et8ek8_of_table_device_table' Fixes: 9ae05fd1 ("[media] et8ek8: Export OF device ID as module aliases") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Markus Elfring authored
Seven single characters (line breaks) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 23 Jun, 2017 14 commits
-
-
Kieran Bingham authored
Drivers must not perform unbalanced calls to stop the entity pipeline, however if they do they will fault in the core media code, as the entity->pipe will be set as NULL. We handle this gracefully in the core with a WARN for the developer. Replace the erroneous check on zero streaming counts, with a check on NULL pipe elements instead, as this is the symptom of unbalanced media_pipeline_stop calls. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pincharts@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Unfortunately the use of 'type' was inconsistent for multiplanar buffer types. Starting with 4.13 both the normal and _MPLANE variants are allowed, thus making it possible to write sensible code. Yes, we messed up :-( Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
-
Hans Verkuil authored
The type field in struct v4l2_selection is supposed to never use the _MPLANE variants. E.g. if the driver supports V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, then userspace should still pass V4L2_BUF_TYPE_VIDEO_CAPTURE. The reasons for this are lost in the mists of time, but it is really annoying. In addition, the exynos drivers didn't follow this rule and instead expected the _MPLANE type. To fix that code is added to the v4l2 core that maps the _MPLANE buffer types to their regular equivalents before calling the driver. Effectively this allows for userspace to use either _MPLANE or the regular buffer type. This keeps backwards compatibility while making things easier for userspace. Since drivers now never see the _MPLANE buffer types the exynos drivers had to be adapted as well. Signed-off-by:
-
Helen Fornazier authored
Declare vimc_sen_video_ops as static, remove warning from sparse tool Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Helen Fornazier authored
Implement scaler and integrated with the core Signed-off-by:
-
Helen Fornazier authored
Implement the debayer filter and integrate it with the core Signed-off-by:
-
Helen Fornazier authored
Change the core structure for adding subdevices in the topology. Instead of calling the specific create function for each subdevice, inject a child platform_device with the driver's name. Each type of node in the topology (sensor, capture, debayer, scaler) will register a platform_driver with the corresponding name through the component subsystem. Implementing a new subdevice type doesn't require vimc-core to be altered. This facilitates future implementation of dynamic entities, where hotpluging an entity in the topology is just a matter of registering/unregistering a platform_device in the system. It also facilitates other implementations of different nodes without touching the core code and remove the need of a header file for each type of node. Signed-off-by:
-
Helen Fornazier authored
Allow user space to change the image format as the frame size, the pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by:
-
Helen Fornazier authored
Allow user space to change the image format as the frame size, the media bus pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by:
-
Helen Fornazier authored
Colorimetry value will always be checked in the same way. Adding a helper macro for that Signed-off-by:
-
Helen Fornazier authored
All links will be checked in the same way. Adding a helper function for that Signed-off-by:
-
Helen Fornazier authored
Move the vimc_cap_pipeline_s_stream from the vimc-cap.c to vimc-common.c as this core will be reused by other subdevices to activate the stream in their directly connected nodes Signed-off-by:
-
Helen Fornazier authored
As all the subdevices in the topology will be initialized in the same way, to avoid code repetition the vimc_ent_sd_{register, unregister} helper functions were created Signed-off-by: -
Helen Fornazier authored
Remove helper functions from vimc-core and add it in vimc-common to clean up the core. Signed-off-by:
-
