- 28 Jul, 2014 30 commits
-
-
Michael Ellerman authored
Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
Although we expect some small discrepancies for very large counts, we seem to be able to count up to 64 billion instructions without too much skew, so do so. Also switch to using decimals for the instruction counts. This just makes it easier to visually compare the expected vs actual values, as well as the raw result from instructions. Before: instructions: result 68719476753 running/enabled 13101961654 cycles: result 38077343785 running/enabled 13101725752 Looped for 68719476736 instructions, overhead 17 Expected 68719476753 Actual 68719476753 Delta 0, 0.000000% success: count_instructions After: instructions: result 64000000016 running/enabled 12197599964 cycles: result 35412471674 running/enabled 12197534110 Looped for 64000000000 instructions, overhead 16 Expected 64000000016 Actual 64000000016 Delta 0, 0.000000% success: count_instructions Signed-off-by:
-
Michael Ellerman authored
Have a task eat some cpu while we are counting instructions to create some scheduler pressure. The idea being to try and unearth any bugs we have in counting that only appear when context switching is happening. Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
There is at least one bug in core_busy_loop(), we use r0, but it's not in the clobber list. We were getting away with this it seems but that was luck. It's also fishy to be touching the stack, even if we do it below the stack pointer. It seems we get away with it, but looking at the generated code that may just be luck. So move it into assembler, do all the stack handling by hand. We create a stack frame to save the non-volatiles in, so we can muck around with them. Signed-off-by:
-
Michael Ellerman authored
start and end should be unsigned long. Signed-off-by:
-
Michael Ellerman authored
Currently we ignore errors from our sub Makefiles. We inherited that from the top-level selftests Makefile which aims to build and run as many tests as possible and damn the torpedoes. For the powerpc tests we'd instead like any errors to fail the build, so we can automatically catch build failures. We can achieve the best of both worlds by using -k, which tells make to keep building when it hits an error, but still reports the error. Signed-off-by:
-
Michael Ellerman authored
I spent ten minutes scratching my head, trying to work out where we enabled relocation on interrupts for guest kernels. Expand the doco to make it clear. Signed-off-by:
-
Michael Ellerman authored
A lot of the code in platforms/pseries is using non-machine initcalls. That means if a kernel built with pseries support runs on another platform, for example powernv, the initcalls will still run. Most of these cases are OK, though sometimes only due to luck. Some were having more effect: * hcall_inst_init - Checking FW_FEATURE_LPAR which is set on ps3 & celleb. * mobility_sysfs_init - created sysfs files unconditionally - but no effect due to ENOSYS from rtas_ibm_suspend_me() * apo_pm_init - created sysfs, allows write - nothing checks the value written to though * alloc_dispatch_log_kmem_cache - creating kmem_cache on non-pseries machines Signed-off-by:
-
Michael Ellerman authored
A lot of the code in platforms/powernv is using non-machine initcalls. That means if a kernel built with powernv support runs on another platform, for example pseries, the initcalls will still run. That is usually OK, because the initcalls will check for something in the device tree or elsewhere before doing anything, so on other platforms they will usually just return. But it's fishy for powernv code to be running on other platforms, so switch them all to be machine initcalls. If we want any of them to run on other platforms in future they should move to sysdev. Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
DISABLE_INTS has a long and storied history, but for some time now it has not actually disabled interrupts. For the open-coded exception handlers, just stop using it, instead call RECONCILE_IRQ_STATE directly. This has the benefit of removing a level of indirection, and making it clear that r10 & r11 are used at that point. For the addition case we still need a macro, so rename it to clarify what it actually does. Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
The comment on TRACE_ENABLE_INTS is incorrect, and appears to have always been incorrect since the code was merged. It probably came from an original out-of-tree patch. Replace it with something that's correct. Also propagate the message to RECONCILE_IRQ_STATE(), because it's potentially subtle. Signed-off-by:
-
Michael Ellerman authored
At the moment the allmodconfig build is failing because we run out of space between altivec_assist() at 0x5700 and the fwnmi_data_area at 0x7000. Fixing it permanently will take some more work, but a quick fix is to move bad_stack() below the fwnmi_data_area. That gives us just enough room with everything enabled. bad_stack() is called from the common exception handlers, but it's a non-conditional branch, so we have plenty of scope to move it further way. Signed-off-by:
-
Michael Ellerman authored
We have a strange #define in cputable.h called CLASSIC_PPC. Although it is defined for 32 & 64bit, it's only used for 32bit and it's basically a duplicate of CONFIG_PPC_BOOK3S_32, so let's use the latter. Signed-off-by:
-
Michael Ellerman authored
Although the name CONFIG_POWER4 suggests that it controls support for power4 cpus, this symbol is actually misnamed. It is a historical wart from the powermac code, which used to support building a 32-bit kernel for power4. CONFIG_POWER4 was used in that context to guard code that was 64-bit only. In the powermac code we can just use CONFIG_PPC64 instead, and in other places it is a synonym for CONFIG_PPC_BOOK3S_64. Signed-off-by:
-
Michael Ellerman authored
There are still a few occurences where it remains, because it helps to explain something that persists. Signed-off-by:
-
Michael Ellerman authored
We no longer support these cpus, so we don't need oprofile support for them either. Signed-off-by:
-
Michael Ellerman authored
Now that we have dropped power3 support we can remove CONFIG_POWER3. The usage in pgtable_32.c was already dead code as CONFIG_POWER3 was not selectable on PPC32. Signed-off-by:
-
Michael Ellerman authored
The previous patch left a bit of a wart in copy_process(). Clean it up a bit by moving the logic out into a helper. Signed-off-by:
-
Michael Ellerman authored
We now only support cpus that use an SLB, so we don't need an MMU feature to indicate that. Signed-off-by:
-
Michael Ellerman authored
Old cpus didn't have a Segment Lookaside Buffer (SLB), instead they had a Segment Table (STAB). Now that we've dropped support for those cpus, we can remove the STAB support entirely. Signed-off-by:
-
Michael Ellerman authored
We inadvertently broke power3 support back in 3.4 with commit f5339277 "powerpc: Remove FW_FEATURE ISERIES from arch code". No one noticed until at least 3.9. By then we'd also broken it with the optimised memcpy, copy_to/from_user and clear_user routines. We don't want to add any more complexity to those just to support ancient cpus, so it seems like it's a good time to drop support for power3 and earlier. Signed-off-by:
-
Michael Ellerman authored
Currently we have sys_sigpending and sys_old_getrlimit defined to use COMPAT_SYS() in systbl.h, but then both are #defined to sys_ni_syscall in systbl.S. This seems to have been done when ppc and ppc64 were merged, in commit 9994a338 "Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S". AFAICS there's no longer (or never was) any need for this, we can just use SYSX() for both and remove the #defines to sys_ni_syscall. The expansion before was: #define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func #define sys_old_getrlimit sys_ni_syscall COMPAT_SYS(old_getrlimit) => .llong .sys_old_getrlimit,.compat_sys_old_getrlimit => .llong .sys_ni_syscall,.compat_sys_old_getrlimit After is: #define SYSX(f, f3264, f32) .llong .f,.f3264 SYSX(sys_ni_syscall, compat_sys_old_getrlimit, sys_old_getrlimit) => .llong .sys_ni_syscall,.compat_sys_old_getrlimit ie. they are equivalent. Finally both COMPAT_SYS() and SYSX() evaluate to sys_ni_syscall in the Cell SPU code. Signed-off-by:
-
Benjamin Herrenschmidt authored
Bring in some important fixes from the 3.16 branch
-
Thomas Falcon authored
The function rtas_flash_firmware passes the address of a data structure, flash_block_list, when making the update-flash-64-and-reboot rtas call. While the endianness of the address is handled correctly, the endianness of the data is not. This patch ensures that the data in flash_block_list is big endian when passed to rtas on little endian hosts. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Vasant Hegde authored
We can continue to read the error log (up to MAX size) even if we get the elog size more than MAX size. Hence change BUG_ON to WARN_ON. Also updated error message. Reported-by:
Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
- 23 Jul, 2014 1 commit
-
-
Michael Ellerman authored
In the recent commit b50a6c58 "Clear MMCR2 when enabling PMU", I screwed up the handling of MMCR2 for tasks using EBB. We must make sure we set MMCR2 *before* ebb_switch_in(), otherwise we overwrite the value of MMCR2 that userspace may have written. That potentially breaks a task that uses EBB and manually uses MMCR2 for event freezing. Fixes: b50a6c58 ("powerpc/perf: Clear MMCR2 when enabling PMU") Cc: stable@vger.kernel.org Signed-off-by:
-
- 22 Jul, 2014 5 commits
-
-
Li Zhong authored
memmove may be called from module code copy_pages(btrfs), and it may call memcpy, which may call back to C code, so it needs to use _GLOBAL_TOC to set up r2 correctly. This fixes following error when I tried to boot an le guest: Vector: 300 (Data Access) at [c000000073f97210] pc: c000000000015004: enable_kernel_altivec+0x24/0x80 lr: c000000000058fbc: enter_vmx_copy+0x3c/0x60 sp: c000000073f97490 msr: 8000000002009033 dar: d000000001d50170 dsisr: 40000000 current = 0xc0000000734c0000 paca = 0xc00000000fff0000 softe: 0 irq_happened: 0x01 pid = 815, comm = mktemp enter ? for help [c000000073f974f0] c000000000058fbc enter_vmx_copy+0x3c/0x60 [c000000073f97510] c000000000057d34 memcpy_power7+0x274/0x840 [c000000073f97610] d000000001c3179c copy_pages+0xfc/0x110 [btrfs] [c000000073f97660] d000000001c3c248 memcpy_extent_buffer+0xe8/0x160 [btrfs] [c000000073f97700] d000000001be4be8 setup_items_for_insert+0x208/0x4a0 [btrfs] [c000000073f97820] d000000001be50b4 btrfs_insert_empty_items+0xf4/0x140 [btrfs] [c000000073f97890] d000000001bfed30 insert_with_overflow+0x70/0x180 [btrfs] [c000000073f97900] d000000001bff174 btrfs_insert_dir_item+0x114/0x2f0 [btrfs] [c000000073f979a0] d000000001c1f92c btrfs_add_link+0x10c/0x370 [btrfs] [c000000073f97a40] d000000001c20e94 btrfs_create+0x204/0x270 [btrfs] [c000000073f97b00] c00000000026d438 vfs_create+0x178/0x210 [c000000073f97b50] c000000000270a70 do_last+0x9f0/0xe90 [c000000073f97c20] c000000000271010 path_openat+0x100/0x810 [c000000073f97ce0] c000000000272ea8 do_filp_open+0x58/0xd0 [c000000073f97dc0] c00000000025ade8 do_sys_open+0x1b8/0x300 [c000000073f97e30] c00000000000a008 syscall_exit+0x0/0x7c Signed-off-by: -
Tyrel Datwyler authored
Commit 75b57ecf refactored device tree nodes to use kobjects such that they can be exposed via /sysfs. A secondary commit 0829f6d1 furthered this rework by moving the kobect initialization logic out of of_node_add into its own of_node_init function. The inital commit removed the existing kref_init calls in the pseries dlpar code with the assumption kobject initialization would occur in of_node_add. The second commit had the side effect of triggering a BUG_ON during DLPAR, migration and suspend/resume operations as a result of dynamically added nodes being uninitialized. This patch fixes this by adding of_node_init calls in place of the previously removed kref_init calls. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Cc: stable@vger.kernel.org Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
-
Aneesh Kumar K.V authored
We now support TASK_SIZE of 16TB, hence the array should be 8. Fixes the below crash: Unable to handle kernel paging request for data at address 0x000100bd Faulting instruction address: 0xc00000000004f914 cpu 0x13: Vector: 300 (Data Access) at [c000000fea75fa90] pc: c00000000004f914: .sys_subpage_prot+0x2d4/0x5c0 lr: c00000000004fb5c: .sys_subpage_prot+0x51c/0x5c0 sp: c000000fea75fd10 msr: 9000000000009032 dar: 100bd dsisr: 40000000 current = 0xc000000fea6ae490 paca = 0xc00000000fb8ab00 softe: 0 irq_happened: 0x00 pid = 8237, comm = a.out enter ? for help [c000000fea75fe30] c00000000000a164 syscall_exit+0x0/0x98 Signed-off-by: -
Paul Mackerras authored
This fixes some bugs in emulate_step(). First, the setting of the carry bit for the arithmetic right-shift instructions was not correct on 64-bit machines because we were masking with a mask of type int rather than unsigned long. Secondly, the sld (shift left doubleword) instruction was using the wrong instruction field for the register containing the shift count. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Joel Stanley authored
These processors do not currently support doorbell IPIs, so remove them from the feature list if we are at DD 1.xx for the 0x004d part. This fixes a regression caused by d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs). With that patch the kernel would hang at boot when calling smp_call_function_many, as the doorbell would not be received by the target CPUs: .smp_call_function_many+0x2bc/0x3c0 (unreliable) .on_each_cpu_mask+0x30/0x100 .cpuidle_register_driver+0x158/0x1a0 .cpuidle_register+0x2c/0x110 .powernv_processor_idle_init+0x23c/0x2c0 .do_one_initcall+0xd4/0x260 .kernel_init_freeable+0x25c/0x33c .kernel_init+0x1c/0x120 .ret_from_kernel_thread+0x58/0x7c Fixes: d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs) Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
- 11 Jul, 2014 4 commits
-
-
Anton Blanchard authored
Knowing how long we spend in firmware calls is an important part of minimising OS jitter. This patch adds tracepoints to each OPAL call. If tracepoints are enabled we branch out to a common routine that calls an entry and exit tracepoint. This allows us to write tools that monitor the frequency and duration of OPAL calls, eg: name count total(ms) min(ms) max(ms) avg(ms) period(ms) OPAL_HANDLE_INTERRUPT 5 0.199 0.037 0.042 0.040 12547.545 OPAL_POLL_EVENTS 204 2.590 0.012 0.036 0.013 2264.899 OPAL_PCI_MSI_EOI 2830 3.066 0.001 0.005 0.001 81.166 We use jump labels if configured, which means we only add a single nop instruction to every OPAL call when the tracepoints are disabled. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Now that we execute the hcall tracepoint entry and exit code out of line, we can use the same stack across both functions. Signed-off-by:
-
Anton Blanchard authored
hcall tracepoints add quite a few instructions to our hcall path: plpar_hcall: mr r2,r2 mfcr r0 stw r0,8(r1) b 164 <---- start ld r12,0(r2) std r12,32(r1) cmpdi r12,0 beq 164 <---- end ... We have an unconditional branch that gets noped out during boot and a load/compare/branch. We also store the tracepoint value to the stack for the hcall_exit path to use. By using jump labels we can simplify this to just a single nop that gets replaced with a branch when the tracepoint is enabled: plpar_hcall: mr r2,r2 mfcr r0 stw r0,8(r1) nop <---- ... If jump labels are not enabled, we fall back to the old method. Signed-off-by:
-
Alexey Kardashevskiy authored
Since a TCE page size can be other than 4K, make it configurable for P5IOC2 and IODA PHBs. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
