- 07 Oct, 2016 27 commits
-
-
Sara Sharon authored
commit ecf51424 upstream. Our HW does not support checksum of fragmented packets. Fix code accordingly to checksum those packets in the driver. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 5e6a98dc ("iwlwifi: mvm: enable TCP/UDP checksum support for 9000 family") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit c3ccf357 upstream. The conversion from a look-up table to a calculation for clock generator parameters forgot to take into account that BRDV x 1/1 is valid only if BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary clock rates). This limitation is documented for the MSIOF module in all supported SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs. Tested on r8a7791/koelsch and r8a7795/salvator-x. Fixes: 65d5665b ("spi: sh-msiof: Update calculation of frequency dividing") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Wanpeng Li authored
commit 3d89e547 upstream. Commit: e9532e69 ("sched/cputime: Fix steal time accounting vs. CPU hotplug") ... set rq->prev_* to 0 after a CPU hotplug comes back, in order to fix the case where (after CPU hotplug) steal time is smaller than rq->prev_steal_time. However, this should never happen. Steal time was only smaller because of the KVM-specific bug fixed by the previous patch. Worse, the previous patch triggers a bug on CPU hot-unplug/plug operation: because rq->prev_steal_time is cleared, all of the CPU's past steal time will be accounted again on hot-plug. Since the root cause has been fixed, we can just revert commit e9532e69. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 'commit e9532e69 ("sched/cputime: Fix steal time accounting vs. CPU hotplug")' Link: http://lkml.kernel.org/r/1465813966-3116-3-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michael Walle authored
commit b53893aa upstream. According to the datasheet you should only write 1 to this bit. If it is not set, at least AIN3 will return bad values on newer silicon revisions. Fixes: d84ca5b3 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit a6c50912 upstream. nvmem_cell_read() is declared as void * if CONFIG_NVMEM is enabled, and as char * otherwise. This can result in a build warning if CONFIG_NVMEM is not enabled and a caller asigns the result to a type other than char * without using a typecast. Use a consistent declaration to avoid the problem. Fixes: e2a5402e ("nvmem: Add nvmem_device based consumer apis.") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Jon Hunter authored
commit 4f6aa326 upstream. To support UHS modes for Tegra an external regulator must be present to adjust the IO voltage accordingly. Even if the regulator is not present but the host supports the UHS modes and the device supports the UHS modes, then we will attempt to switch to a high-speed mode. Without an external regulator, Tegra will fail to switch to the high-speed mode. It has been found that with some SD cards, that once it has been switch to operate at a high-speed mode, all subsequent commands issues to the card will fail and so it will not be possible to switch back to a non high-speed mode and so the SD card initialisation will fail. The SDHCI core does not require that the host have an external regulator when switching to UHS modes and therefore, the Tegra SDHCI host controller should only advertise the UHS modes as being supported if the regulator for the IO voltage is present. Fortunately, Tegra has a vendor specific register which can be used to control which modes are advertised via the SDHCI_CAPABILITIES register. Hence, if there is no IO voltage regulator available for the Tegra SDHCI host, then don't advertise the UHS modes. Note that if the regulator is not available, we also don't advertise that the SDHCI is compatible with v3.0 of the SDHCI specification because this will read the SDHCI_CAPABILITIES_1 register which will enable other UHS modes. This fixes commit 7ad2ed1d ("mmc: tegra: enable UHS-I modes") which enables UHS mode without checking if the board can support them. Fixes: 7ad2ed1d ("mmc: tegra: enable UHS-I modes") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 8b6a3fe8 upstream. When tearing down an AUX buf for an event via perf_mmap_close(), __perf_event_output_stop() is called on the event's CPU to ensure that trace generation is halted before the process of unmapping and freeing the buffer pages begins. The callback is performed via cpu_function_call(), which ensures that it runs with interrupts disabled and is therefore not preemptible. Unfortunately, the current code grabs the per-cpu context pointer using get_cpu_ptr(), which unnecessarily disables preemption and doesn't pair the call with put_cpu_ptr(), leading to a preempt_count() imbalance and a BUG when freeing the AUX buffer later on: WARNING: CPU: 1 PID: 2249 at kernel/events/ring_buffer.c:539 __rb_free_aux+0x10c/0x120 Modules linked in: [...] Call Trace: [<ffffffff813379dd>] dump_stack+0x4f/0x72 [<ffffffff81059ff6>] __warn+0xc6/0xe0 [<ffffffff8105a0c8>] warn_slowpath_null+0x18/0x20 [<ffffffff8112761c>] __rb_free_aux+0x10c/0x120 [<ffffffff81128163>] rb_free_aux+0x13/0x20 [<ffffffff8112515e>] perf_mmap_close+0x29e/0x2f0 [<ffffffff8111da30>] ? perf_iterate_ctx+0xe0/0xe0 [<ffffffff8115f685>] remove_vma+0x25/0x60 [<ffffffff81161796>] exit_mmap+0x106/0x140 [<ffffffff8105725c>] mmput+0x1c/0xd0 [<ffffffff8105cac3>] do_exit+0x253/0xbf0 [<ffffffff8105e32e>] do_group_exit+0x3e/0xb0 [<ffffffff81068d49>] get_signal+0x249/0x640 [<ffffffff8101c273>] do_signal+0x23/0x640 [<ffffffff81905f42>] ? _raw_write_unlock_irq+0x12/0x30 [<ffffffff81905f69>] ? _raw_spin_unlock_irq+0x9/0x10 [<ffffffff81901896>] ? __schedule+0x2c6/0x710 [<ffffffff810022a4>] exit_to_usermode_loop+0x74/0x90 [<ffffffff81002a56>] prepare_exit_to_usermode+0x26/0x30 [<ffffffff81906d1b>] retint_user+0x8/0x10 This patch uses this_cpu_ptr() instead of get_cpu_ptr(), since preemption is already disabled by the caller. Signed-off-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 95ff4ca2 ("perf/core: Free AUX pages in unmap path") Link: http://lkml.kernel.org/r/20160824091905.GA16944@arm.comSigned-off-by:
-
Stefan Wahren authored
commit 75324684 upstream. In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: fa8ad788 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Boqun Feng authored
commit af06d4f7 upstream. 0day found a boot warning triggered in rcu_perf_writer() on !SMP kernel: WARN_ON(rcu_gp_is_normal() && gp_exp); , the root cause of which is trying to measure expedited grace periods(by setting gp_exp to true by default) when all the grace periods are normal(TINY RCU only has normal grace periods). However, such a mis-setting would only result in failing to measure the performance for a specific kind of grace periods, therefore using a WARN_ON to check this is a little overkilling. We could handle this inside rcuperf module via some error messages to tell users about the mis-settings. Therefore this patch removes the WARN_ON in rcu_perf_writer() and handles those checkings in rcu_perf_init() with plain if() code. Moreover, this patch changes the default value of gp_exp to 1) align with rcutorture tests and 2) make the default setting work for all RCU implementations by default. Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Fixes: http://lkml.kernel.org/r/57411b10.mFvG0+AgcrMXGtcj%fengguang.wu@intel.comSigned-off-by:
-
Wolfram Sang authored
commit e35478ea upstream. We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Andy Shevchenko authored
commit 7440926e upstream. Documentation incorrectly refers to struct pinctrl_desc, where no such flag is available. Replace the name of the struct. Fixes: commit 8c4c2016 ("pinctrl: move strict option to pinmux_ops") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Masahiro Yamada authored
commit 10ef8277 upstream. Without this, reading the "pins" in the debugfs causes kernel BUG. Fixes: 6e908892 ("pinctrl: UniPhier: add UniPhier pinctrl core support") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Heinrich Schuchardt authored
commit cd956722 upstream. In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Heinrich Schuchardt authored
commit 3fdbda44 upstream. Variable adapter is incorrectly initialized. Fixes: bf00dc22 ("mwifiex: AMSDU Rx frame handling in AP mode") Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Roger Quadros authored
commit d248220f upstream. Since commit 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Robin Murphy authored
commit ba6dea4f upstream. Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Alex Deucher authored
commit 670bb4fd upstream. Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ilia Mirkin authored
commit 666ca3d8 upstream. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
David Herrmann authored
commit 90fd68dc upstream. The udl damage handler is supposed to render 'height' lines, but its iterator has an obvious typo that makes it miss most lines if the rectangle does not cover 0/0. Fix the damage handler to correctly render all lines. This is a fallout from: commit e3758824 Author: Noralf Trønnes <noralf@tronnes.org> Date: Thu Apr 28 17:18:37 2016 +0200 drm/udl: Use drm_fb_helper deferred_io support Tested-by:
poma <poma@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 05fb3c19 upstream. Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by:
David Saggiorato <david@saggiorato.net> Tested-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit e1bfc11c upstream. cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.orgSigned-off-by:
-
Sergei Miroshnichenko authored
commit 9abefcb1 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24Signed-off-by:
Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
zhong jiang authored
commit 5b398e41 upstream. I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Hugh Dickins <hughd@google.com> Suggested-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Karl Beldan authored
commit f6d7c1b5 upstream. This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9 ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e5 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Signed-off-by:
Karl Beldan <kbeldan@baylibre.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Dmitry Vyukov authored
commit e436fd61 upstream. be7635e7 ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added .softirqentry.text section, but it was not added to recordmcount. So functions in the section are untracable. Add the section to scripts/recordmcount.c and scripts/recordmcount.pl. Fixes: be7635e7 ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") Link: http://lkml.kernel.org/r/1474902626-73468-1-git-send-email-dvyukov@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Steve Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Tejun Heo authored
commit 9157056d upstream. On the v2 hierarchy, "cgroup.subtree_control" rejects controller enables if the cgroup has processes in it. The enforcement of this logic assumes that the cgroup wouldn't have any css_sets associated with it if there are no tasks in the cgroup, which is no longer true since a79a908f ("cgroup: introduce cgroup namespaces"). When a cgroup namespace is created, it pins the css_set of the creating task to use it as the root css_set of the namespace. This extra reference stays as long as the namespace is around and makes "cgroup.subtree_control" think that the namespace root cgroup is not empty even when it is and thus reject controller enables. Fix it by making cgroup_subtree_control() walk and test emptiness of each css_set instead of testing whether the list_head is empty. While at it, update the comment of cgroup_task_count() to indicate that the returned value may be higher than the number of tasks, which has always been true due to temporary references and doesn't break anything. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Evgeny Vereshchagin <evvers@ya.ru> Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Aditya Kali <adityakali@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Fixes: a79a908f ("cgroup: introduce cgroup namespaces") Link: https://github.com/systemd/systemd/pull/3589#issuecomment-249089541Signed-off-by:
-
Joonwoo Park authored
commit 28b89b9e upstream. A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by:
Joonwoo Park <joonwoop@codeaurora.org> Acked-by:
Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 30 Sep, 2016 13 commits
-
-
Greg Kroah-Hartman authored
-
Wilfried Klaebe authored
commit 15f6d337 upstream. On May 4th, Bjørn Mork provided patch 697bbc7b ("builddeb: include objtool binary in headers package"). However, that one only works if $srctree=$objtree, because the objtool binaries are not written to the srctree, but to the objtree. Signed-off-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Fixes: 697bbc7b ("builddeb: include objtool binary in headers package") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Steve Wise authored
commit 12eb5137 upstream. There exists a race where the application can setup a connection and then disconnect it before iw_cxgb4 processes the fw4_ack message. For passive side connections, the fw4_ack message is used to know when to stop the ep timer for MPA_REPLY messages. If the application disconnects before the fw4_ack is handled then c4iw_ep_disconnect() needs to clean up the timer state and stop the timer before restarting it for the disconnect timer. Failure to do this results in a "timer already started" message and a premature stopping of the disconnect timer. Fixes: e4b76a2a ("RDMA/iw_cxgb4: stop_ep_timer() after MPA negotiation") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 4b3ec5a3 upstream. Currently we call quarantine_reduce() for ___GFP_KSWAPD_RECLAIM (implied by __GFP_RECLAIM) allocation. So, basically we call it on almost every allocation. quarantine_reduce() sometimes is heavy operation, and calling it with disabled interrupts may trigger hard LOCKUP: NMI watchdog: Watchdog detected hard LOCKUP on cpu 2irq event stamp: 1411258 Call Trace: <NMI> dump_stack+0x68/0x96 watchdog_overflow_callback+0x15b/0x190 __perf_event_overflow+0x1b1/0x540 perf_event_overflow+0x14/0x20 intel_pmu_handle_irq+0x36a/0xad0 perf_event_nmi_handler+0x2c/0x50 nmi_handle+0x128/0x480 default_do_nmi+0xb2/0x210 do_nmi+0x1aa/0x220 end_repeat_nmi+0x1a/0x1e <<EOE>> __kernel_text_address+0x86/0xb0 print_context_stack+0x7b/0x100 dump_trace+0x12b/0x350 save_stack_trace+0x2b/0x50 set_track+0x83/0x140 free_debug_processing+0x1aa/0x420 __slab_free+0x1d6/0x2e0 ___cache_free+0xb6/0xd0 qlist_free_all+0x83/0x100 quarantine_reduce+0x177/0x1b0 kasan_kmalloc+0xf3/0x100 Reduce the quarantine_reduce iff direct reclaim is allowed. Fixes: 55834c59("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1470062715-14077-2-git-send-email-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Acked-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Alexander Potapenko authored
commit c3cee372 upstream. If the total amount of memory assigned to quarantine is less than the amount of memory assigned to per-cpu quarantines, |new_quarantine_size| may overflow. Instead, set it to zero. [akpm@linux-foundation.org: cleanup: use WARN_ONCE return value] Link: http://lkml.kernel.org/r/1470063563-96266-1-git-send-email-glider@google.com Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation") Signed-off-by:
-
Dan Carpenter authored
commit 8a545f18 upstream. We can't pass error pointers to kfree() or it causes an oops. Fixes: 52b209f7 ('get rid of hostfs_read_inode()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Dan Carpenter authored
commit f4cceb2a upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)') Signed-off-by:
-
Jon Hunter authored
commit a83f1fc3 upstream. Commit 0259f522 ('soc/tegra: pmc: Restore base address on probe failure') fixes an issue where the PMC base address pointer is not restored on probe failure. However, this fix creates another problem where if early initialisation of the PMC driver fails and an initial mapping for the PMC address space is not created, then when the PMC device is probed, the PMC base address pointer will not be valid and this will cause a crash when tegra_pmc_init() is called and attempts to access a register. Although the PMC address space is mapped a 2nd time during the probe and so this could be fixed by populating the base address pointer earlier during the probe, this adds more complexity to the code. Moreover, the PMC probe also assumes the the soc data pointer is also initialised when the device is probed and if not will also lead to a crash when calling tegra_pmc_init_tsense_reset(). Given that if the early initialisation does fail then something bad has happen, it seems acceptable to allow the PMC device probe to fail as well. Therefore, if the PMC base address pointer or soc data pointer are not valid when probing the PMC device, WARN and return an error. Fixes: 0259f522 ('soc/tegra: pmc: Restore base address on probe failure') Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Kshitiz Gupta authored
commit 0066c8b6 upstream. Fix PHY delay compensation math in igb_ptp_tx_hwtstamp() and igb_ptp_rx_rgtstamp. Add PHY delay compensation in igb_ptp_rx_pktstamp(). In the IGB driver, there are two functions that retrieve timestamps received by the PHY - igb_ptp_rx_rgtstamp() and igb_ptp_rx_pktstamp(). The previous commit only changed igb_ptp_rx_rgtstamp(), and the change was incorrect. There are two instances in which PHY delay compensations should be made: - Before the packet transmission over the PHY, the latency between when the packet is timestamped and transmission of the packets, should be an add operation, but it is currently a subtract. - After the packets are received from the PHY, the latency between the receiving and timestamping of the packets should be a subtract operation, but it is currently an add. Signed-off-by:
Kshitiz Gupta <kshitiz.gupta@ni.com> Fixes: 3f544d2a (igb: adjust ptp timestamps for tx/rx latency) Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Alexander Duyck authored
commit 3d951822 upstream. Back when I submitted the GSO code I messed up and dropped the support for disabling the VLAN tag filtering via the feature bit. This patch re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the VLAN filtering independent of toggling promiscuous mode. Fixes: b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
commit f60439bc upstream. When I was adding the code for enabling VLAN promiscuous mode with SR-IOV enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has assumed there was code in another path that was setting it when we enabled SR-IOV. This wasn't the case and as a result we were just disabling VLAN filtering for all the VFs apparently. Also the previous patches were always clearing CFIEN which was always set to 0 by the hardware anyway so I am dropping the redundant bit clearing. Fixes: 16369564 ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by:
-
Sven Van Asbroeck authored
commit 5381cfb6 upstream. The device's model download function returns the model data as an array of u32s, which is later compared to the reference model data. However, since the latter is an array of u16s, the comparison does not happen correctly, and model verification fails. This in turn breaks the POR initialization sequence. Fixes: 39e7213e ("max17042_battery: Support regmap to access device's registers") Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Wei Yongjun authored
commit 33e7664a upstream. Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Fixes: 3636859b ("power_supply: Add support for tps65217-charger") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
