And move MIPS-specific header to include/linux.

Hi,

Patch 1 of 2 to enable the smc91x driver to be used by the IBM Redwood5
and Redwood6 boards.

Move drivers/net/arm/smc91x.[ch] to drivers/net
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>

The Marvell MV64340 is a system controller with PCI and 3 integrated GigE
interfaces.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers don't
reply to emails and haven't touched it in awhile.  Can't even config it to
try to build it without other patches to the kernel tree.

bk-rm-script:

#! /bin/sh
bk rm -r ./arch/i386/mach-pc9800
bk rm -r ./arch/i386/boot98
bk rm ./drivers/char/lp_old98.c
bk rm ./drivers/serial/serial98.c
bk rm ./drivers/scsi/scsi_pc98.c
bk rm ./drivers/scsi/pc980155.c
bk rm ./drivers/scsi/pc980155.h
bk rm ./drivers/block/floppy98.c
bk rm ./drivers/input/keyboard/98kbd.c
bk rm ./drivers/input/serio/98kbd-io.c
bk rm ./drivers/input/misc/98spkr.c
bk rm ./drivers/input/mouse/98busmouse.c
bk rm ./drivers/ide/legacy/pc9800.c
bk rm ./drivers/ide/legacy/hd98.c
bk rm -r ./include/asm-i386/mach-pc9800
bk rm ./include/asm-i386/pc9800_sca.h
bk rm ./include/asm-i386/pc9800.h
bk rm ./fs/partitions/nec98.c
bk rm ./fs/partitions/nec98.h
bk rm ./sound/isa/cs423x/pc98.c
bk rm ./sound/isa/cs423x/pc9801_118_magic.h
bk rm ./sound/isa/cs423x/sound_pc9800.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Contributed by VIA, cleaned up by Alan.

From: Yoshinori Sato <ysato@users.sourceforge.jp>

- ne2k compatible NIC support

Pete Popov, the author says

This driver is obsolete and broken in 2.4 (and I'm pretty sure in 2.6).
The hardware has not been available for a while. I wrote the driver
for 2.2 but after I left RedCreek (which went out of business),
someone in the community updated it to 2.4, but I don't think that
person even had the hardware to test it so the driver remained broken
in 2.4. So my recommendation is that it's really time to remove this
driver from the kernel tree. Just my opinion but I thought I'd share
it with you.
[...]
I can't imagine that there are any users because 2.4 was broken last
time I checked (admittedly that was a year ago).

The driver was copied from the very-buggy r8169 (pre-Francois),
and is for hardware that isn't even out of the lab yet.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This is the iSeries virtual ethernet driver.  David Gibson has taken you
previous comments and hopefully sitisfied most of them.  The driver has
also undergone some more testing which showed up some bugs which have been
addressed.

Unfortunately, Anton is about to submit some other patches of mine which
will sightly comflict with this.  I will send a patch shortly that will
(hopefully) fix that.

Contributed by Leonid Grossman @ S2IO

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch lets 2.6.3-rc4 build and boot on an PPC64 iSeries box (at least
for my configuration).  The veth.o bit in the networking Makefile got there
by accident and should be removed anyway ...

There is more to make it work properly (note the "Temporary hack"), but
this gets us closer.

Based on viro NE32-at1500
	ROTFL.  The last remnants of CONFIG_AT1500 removed - that was a hell
	of an ancient bug (at1500_probe() was never defined, AFAICS - all
	way back to 0.99.15).

The patch below switches MII to be select'ed instead of including it in
the Makefile.

Note that this patch requires a recent Linus' tree with the select CRC32
patch included.

diffstat output:

 drivers/net/Kconfig          |   11 +++++++++++
 drivers/net/Makefile         |   28 +++++++++++-----------------
 drivers/net/pcmcia/Kconfig   |    1 +
 drivers/net/tulip/Kconfig    |    1 +
 drivers/usb/net/Kconfig      |    2 ++
 drivers/usb/net/Makefile.mii |    6 ------
 6 files changed, 26 insertions(+), 23 deletions(-)


Tangential to the patch I observed a small problem (not fixed in the patch):
MII depends on NET_ETHERNET, but USB_PEGASUS and USB_USBNET depend
only on NET.

cu
Adrian

Rename ariadne2 to zorro8390, since this driver supports several NS8390-based
Zorro Ethernet cards. Kill all never used occurrencies of CONFIG_NE2K_ZORRO.

Support more chips and split out all the complex PHY
handling into a seperate file.

Move Acorn and ARM SCSI and net drivers to drivers/{net,scsi}/arm.
This also allows us to find a reasonable home for other ARM specific
net drivers.

This is the patch to support NEC PC-9800 subarchitecture
against 2.5.65-ac1. (9/14)

C-bus(PC98's legacy bus like ISA) network cards support.
Change IO port and IRQ assign.
Add NE2000 compatible driver for PC-9800.
  PCI netwwork card works fine without patch.

Regards,
Osamu Tomita

arlan, ray_cs, and strip.

Contributed by Randy Dunlap.

From the maintainer, Elmer Joandi(sp?):
	aironet4500 is superseded by cisco340 drivers (airo.c) by Ben Reed
and the  only strenght of my driver is that it allows to access absolutely
all registers on card. Which is useful for developers only. Besides there
is no normal interface to configure crypto in my driver, as the general
interface is not userfriendly at all. So in fact, I use Bens driver for my
ISP bussiness in general cases and my driver for troubleshooting.

series of network interface cards.

Does:
- NAPI
- Zero copy Tx
- VLAN hardware acceleration
- TCP Segmentation offload

One of the goals of the whole new modversions implementation:
export-objs is gone for good!

  Some ethernet drivers other than those in .../drivers/net need generic
  MII code too and this cset shows how we do it for .../drivers/usb/net;
  For now only pegasus.c is using this feature, but as soon as we find
  more MII compliant controllers we'll put them in Makefile.mii too.
  Note: drivers which use the generic mii routines should bracket the
  code with #ifdef CONFIG_MII #endif since CONFIG_MII may not be present.
  See pegasus.c for more details.

Makefiles no longer need to include Rules.make, which is currently an
empty file.  This patch removes it from the drivers tree Makefiles.

out-of-directory lib references.
  
Add smc91c92_cs driver's missing mii.o reference to this new section.