As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.

To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.

Fixes: c4d7eb57 ("net/mxl5e: Add change profile method")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of
actions starting after previous split and ending at the current action.
However, that range is not provided as arguments and
mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates
over all flow actions. Not only this is redundant, it also causes a bug
when mlx5e_tc_act->post_parse() callback is not idempotent since it will be
called for every split. For example, ct action tc_act_post_parse_ct()
callback obtains a reference to mlx5_ct_ft instance and calling it several
times during parsing stage will cause reference counter imbalance.

Fix the issue by providing a proper action range of the current split
subset to mlx5e_tc_act_post_parse() and only calling
mlx5e_tc_act->post_parse() for actions inside the subset range.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.

Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.

This fix applies only for legacy rq.

Fixes: 1b1e4868 ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.

Fix it by checking for the correct range.

Fixes: c71ad41c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There is no point in recovery during device removal. Also, if health
work started need to wait for it to avoid races and NULL pointer
access.

Hence, drain health WQ before removing device.

Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5 health mechanism is using devlink APIs, which are using devlink
notify APIs. After the cited patch, using devlink notify APIs after
devlink is unregistered triggers a WARN_ON().
Hence, drain health WQ before devlink is unregistered.

Fixes: cf530217 ("devlink: Notify users when objects are accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The shared buffer pools configuration which are stored in the SBCM
register are updated when the user changes the prio2buffer mapping.

However, in case the user desired prio2buffer change is invalid,
which can occur due to mapping a lossless priority to a not large enough
buffer, the SBCM update should not be performed, as the user command is
failed.

Thus, Perform the SBCM update only after xoff threshold calculation is
performed and the user prio2buffer mapping is validated.

Fixes: a440030d ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, when a user triggers a change in port buffer headroom
(buffers 0-7), the driver checks that the requested headroom does
not exceed the total port buffer size. However, this check does not
take into account the internal buffers (buffers 8-9), which are also
part of the total port buffer. This can result in treating invalid port
buffer change requests as valid, causing unintended changes to the shared
buffer.

To address this, include the internal buffers size in the calculation of
available port buffer space which ensures that port buffer requests do not
exceed the correct limit.

Furthermore, remove internal buffers (8-9) size from the total_size
calculation as these buffers are reserved for internal use and are not
exposed to the user.

While at it, add verbosity to the debug prints in
mlx5e_port_query_buffer() function to ease future debugging.

Fixes: ecdf2dad ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit adds a compeletion to remove dependency on rtnl
lock. But it causes a deadlock for multiple encapsulations:

 crash> bt ffff8aece8a64000
 PID: 1514557  TASK: ffff8aece8a64000  CPU: 3    COMMAND: "tc"
  #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45
  #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418
  #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898
  #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8
  #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb
  #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core]
  #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core]
  #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core]
  #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core]
  #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core]
 #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core]
 #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core]
 #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8
 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower]
 #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower]
 #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047
 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31
 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853
 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835
 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27
 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245
 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482
 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a
 #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2
 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2
 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f
 #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8
 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c
 crash> bt 0xffff8aeb07544000
 PID: 1110766  TASK: ffff8aeb07544000  CPU: 0    COMMAND: "kworker/u20:9"
  #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45
  #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418
  #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88
  #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b
  #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core]
  #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core]
  #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core]
  #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c
  #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012
  #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d
 #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f

After the first encap is attached, flow will be added to encap
entry's flows list. If neigh update is running at this time, the
following encaps of the flow can't hold the encap_tbl_lock and
sleep. If neigh update thread is waiting for that flow's init_done,
deadlock happens.

Fix it by holding lock outside of the for loop. If neigh update is
running, prevent encap flows from offloading. Since the lock is held
outside of the for loop, concurrent creation of encap entries is not
allowed. So remove unnecessary wait_for_completion call for res_ready.

Fixes: 95435ad7 ("net/mlx5e: Only access fully initialized flows in neigh update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Move set_encap_dests() and clean_encap_dests() to the tunnel encap
dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set()
and mlx5e_tc_tun_encap_dests_unset().

No functional change in this patch. It is needed in the next patch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: c61a4043 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2023-05-22

This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit c6d96df9 ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df49 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.

The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.

Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.

Hardware DSA untagging, introduced with the commit 2d7605a7 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.

Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.

So the correct way to handle this is:

For all SoCs:

Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).

For non MTK_NETSYS_V2 SoCs:

Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).

When a non MTK_NETSYS_V2 SoC MAC does not use DSA:

Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).

Fixes: c6d96df9 ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We had a good run, but after 4 weeks of use we heard someone
asking about pw-bot commands. Let's explain its existence
in the docs. It's not a complete documentation but hopefully
it's enough for the casual contributor. The project and scope
are in flux so the details would likely become out of date,
if we were to document more in depth.

Link: https://lore.kernel.org/all/20230522140057.GB18381@nucnuc.mle/Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522230903.1853151-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 50749f2d ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Fixes: 50749f2d ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.

Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.

Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.

Fixes: e1ed3e4d ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

page_pool_ring_[un]lock() use in_softirq() to decide which
spin lock variant to use, and when they are called in the
context with in_softirq() being false, spin_lock_bh() is
called in page_pool_ring_lock() while spin_unlock() is
called in page_pool_ring_unlock(), because spin_lock_bh()
has disabled the softirq in page_pool_ring_lock(), which
causes inconsistency for spin lock pair calling.

This patch fixes it by returning in_softirq state from
page_pool_producer_lock(), and use it to decide which
spin lock variant to use in page_pool_producer_unlock().

As pool->ring has both producer and consumer lock, so
rename it to page_pool_producer_[un]lock() to reflect
the actual usage. Also move them to page_pool.c as they
are only used there, and remove the 'inline' as the
compiler may have better idea to do inlining or not.

Fixes: 78862447 ("net: page_pool: Add bulk support for ptr_ring")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()),  is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.

For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.

For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It was noticing that after a while when unloading/loading the driver and
sending traffic through the switch, it would stop working. It would stop
forwarding any traffic and the only way to get out of this was to do a
power cycle of the board. The root cause seems to be that the switch
core is initialized twice. Apparently initializing twice the switch core
disturbs the pointers in the queue systems in the HW, so after a while
it would stop sending the traffic.
Unfortunetly, it is not possible to use a reset of the switch here,
because the reset line is connected to multiple devices like MDIO,
SGPIO, FAN, etc. So then all the devices will get reseted when the
network driver will be loaded.
So the fix is to check if the core is initialized already and if that is
the case don't initialize it again.

Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

After the cited patch, mlx5_irq xarray index can be different then
mlx5_irq MSIX table index.
Fix it by storing both mlx5_irq xarray index and MSIX table index.

Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited patch deny the user of changing the affinity of mlx5 irqs,
which break backward compatibility.
Hence, allow the user to change the affinity of mlx5 irqs.

Fixes: bbac70c7 ("net/mlx5: Use newer affinity descriptor")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Whenever a shutdown is invoked, free irqs only and keep mlx5_irq
synthetic wrapper intact in order to avoid use-after-free on
system shutdown.

for example:
==================================================================
BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80
Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608

CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G    B   W  O  6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
  <TASK>
  dump_stack_lvl+0x34/0x48
  print_report+0x170/0x473
  ? _find_first_bit+0x66/0x80
  kasan_report+0xad/0x130
  ? _find_first_bit+0x66/0x80
  _find_first_bit+0x66/0x80
  mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core]
  ? console_unlock+0x2fa/0x430
  ? _raw_spin_lock_irqsave+0x8d/0xf0
  ? _raw_spin_unlock_irqrestore+0x42/0x80
  ? preempt_count_add+0x7d/0x150
  ? __wake_up_klogd.part.0+0x7d/0xc0
  ? vprintk_emit+0xfe/0x2c0
  ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
  ? dev_attr_show.cold+0x35/0x35
  ? devlink_health_do_dump.part.0+0x174/0x340
  ? devlink_health_report+0x504/0x810
  ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  ? process_one_work+0x680/0x1050
  mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
  ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
  ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
  mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
  ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
  devlink_health_reporter_recover+0xa6/0x1f0
  devlink_health_report+0x2f7/0x810
  ? vsnprintf+0x854/0x15e0
  mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
  ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
  ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
  ? newidle_balance+0x9b7/0xe30
  ? psi_group_change+0x6a7/0xb80
  ? mutex_lock+0x96/0xf0
  ? __mutex_lock_slowpath+0x10/0x10
  mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  process_one_work+0x680/0x1050
  worker_thread+0x5a0/0xeb0
  ? process_one_work+0x1050/0x1050
  kthread+0x2a2/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>

Freed by task 1:
  kasan_save_stack+0x23/0x50
  kasan_set_track+0x21/0x30
  kasan_save_free_info+0x2a/0x40
  ____kasan_slab_free+0x169/0x1d0
  slab_free_freelist_hook+0xd2/0x190
  __kmem_cache_free+0x1a1/0x2f0
  irq_pool_free+0x138/0x200 [mlx5_core]
  mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core]
  mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core]
  shutdown+0x194/0x1aa [mlx5_core]
  pci_device_shutdown+0x75/0x120
  device_shutdown+0x35c/0x620
  kernel_restart+0x60/0xa0
  __do_sys_reboot+0x1cb/0x2c0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x4b/0xb5

The buggy address belongs to the object at ffff88823fc0d300
  which belongs to the cache kmalloc-192 of size 192
The buggy address is located 24 bytes inside of
  192-byte region [ffff88823fc0d300, ffff88823fc0d3c0)

The buggy address belongs to the physical page:
page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x23fc0c
head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                             ^
  ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
general protection fault, probably for non-canonical address
0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67]
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G    B   W  O  6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:__alloc_pages+0x141/0x5c0
Call Trace:
  <TASK>
  ? sysvec_apic_timer_interrupt+0xa0/0xc0
  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
  ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0
  ? _raw_spin_unlock_irqrestore+0x3d/0x80
  __kmalloc_large_node+0x80/0x120
  ? kvmalloc_node+0x4e/0x170
  __kmalloc_node+0xd4/0x150
  kvmalloc_node+0x4e/0x170
  mlx5e_open_channels+0x631/0x3a10 [mlx5_core]
  ? console_unlock+0x2fa/0x430
  ? _raw_spin_lock_irqsave+0x8d/0xf0
  ? _raw_spin_unlock_irqrestore+0x42/0x80
  ? preempt_count_add+0x7d/0x150
  ? __wake_up_klogd.part.0+0x7d/0xc0
  ? vprintk_emit+0xfe/0x2c0
  ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
  ? dev_attr_show.cold+0x35/0x35
  ? devlink_health_do_dump.part.0+0x174/0x340
  ? devlink_health_report+0x504/0x810
  ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  ? process_one_work+0x680/0x1050
  mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
  ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
  ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
  mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
  ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
  devlink_health_reporter_recover+0xa6/0x1f0
  devlink_health_report+0x2f7/0x810
  ? vsnprintf+0x854/0x15e0
  mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
  ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
  ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
  ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
  ? newidle_balance+0x9b7/0xe30
  ? psi_group_change+0x6a7/0xb80
  ? mutex_lock+0x96/0xf0
  ? __mutex_lock_slowpath+0x10/0x10
  mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
  process_one_work+0x680/0x1050
  worker_thread+0x5a0/0xeb0
  ? process_one_work+0x1050/0x1050
  kthread+0x2a2/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x22/0x30
  </TASK>
---[ end trace 0000000000000000  ]---
RIP: 0010:__alloc_pages+0x141/0x5c0
Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea
03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02
00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89
RSP: 0018:ffff888251f0f438 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000
RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60
RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a
R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003
R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380
FS:  0000000000000000(0000) GS:ffff88bf2be80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception  ]---]
Reported-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.comSigned-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.

Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.

Fixes: fadd59fc ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.

Fixes: fadd59fc ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:

	cpu0					cpu1
	----					----

 mlx5_devlink_eswitch_mode_set(dev0)
  esw_offloads_devcom_init()
   mlx5_devcom_register_component(esw0)
                                         mlx5_devlink_eswitch_mode_set(dev1)
                                          esw_offloads_devcom_init()
                                           mlx5_devcom_register_component(esw1)
                                           mlx5_devcom_send_event()
   mlx5_devcom_send_event()

Hence, check whether the eswitches are already un/paired before
free/allocation of resources.

Fixes: 09b27846 ("net: devlink: enable parallel ops on netlink interface")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited patch is using the eswitch object mapping pool while
in nic mode where it isn't initialized. This results in the
trace below [0].

Fix that by using either nic or eswitch object mapping pool
depending if eswitch is enabled or not.

[0]:
[  826.446057] ==================================================================
[  826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[  826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233

[  826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G        W          6.3.0-rc6+ #1
[  826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  826.449785] Call Trace:
[  826.450052]  <TASK>
[  826.450302]  dump_stack_lvl+0x33/0x50
[  826.450650]  print_report+0xc2/0x610
[  826.450998]  ? __virt_addr_valid+0xb1/0x130
[  826.451385]  ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[  826.451935]  kasan_report+0xae/0xe0
[  826.452276]  ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[  826.452829]  mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[  826.453368]  ? __kmalloc_node+0x5a/0x120
[  826.453733]  esw_add_restore_rule+0x20f/0x270 [mlx5_core]
[  826.454288]  ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core]
[  826.455011]  ? mutex_unlock+0x80/0xd0
[  826.455361]  ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[  826.455862]  ? mapping_add+0x2cb/0x440 [mlx5_core]
[  826.456425]  mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core]
[  826.457058]  ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core]
[  826.457636]  ? __kasan_kmalloc+0x77/0x90
[  826.458000]  ? __kmalloc+0x57/0x120
[  826.458336]  mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core]
[  826.458916]  ? ct_kernel_enter.constprop.0+0x48/0xa0
[  826.459360]  ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core]
[  826.459933]  ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core]
[  826.460507]  ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core]
[  826.461046]  ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core]
[  826.461635]  mlx5e_configure_flower+0x969/0x2110 [mlx5_core]
[  826.462217]  ? _raw_spin_lock_bh+0x85/0xe0
[  826.462597]  ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core]
[  826.463163]  ? kasan_save_stack+0x2e/0x40
[  826.463534]  ? down_read+0x115/0x1b0
[  826.463878]  ? down_write_killable+0x110/0x110
[  826.464288]  ? tc_setup_action.part.0+0x9f/0x3b0
[  826.464701]  ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core]
[  826.465253]  ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core]
[  826.465878]  tc_setup_cb_add+0x112/0x250
[  826.466247]  fl_hw_replace_filter+0x230/0x310 [cls_flower]
[  826.466724]  ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower]
[  826.467212]  fl_change+0x14e1/0x2030 [cls_flower]
[  826.467636]  ? sock_def_readable+0x89/0x120
[  826.468019]  ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[  826.468509]  ? kasan_unpoison+0x23/0x50
[  826.468873]  ? get_random_u16+0x180/0x180
[  826.469244]  ? __radix_tree_lookup+0x2b/0x130
[  826.469640]  ? fl_get+0x7b/0x140 [cls_flower]
[  826.470042]  ? fl_mask_put+0x200/0x200 [cls_flower]
[  826.470478]  ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[  826.470973]  ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[  826.471427]  tc_new_tfilter+0x644/0x1050
[  826.471795]  ? tc_get_tfilter+0x860/0x860
[  826.472170]  ? __thaw_task+0x130/0x130
[  826.472525]  ? arch_stack_walk+0x98/0xf0
[  826.472892]  ? cap_capable+0x9f/0xd0
[  826.473235]  ? security_capable+0x47/0x60
[  826.473608]  rtnetlink_rcv_msg+0x1d5/0x550
[  826.473985]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  826.474383]  ? __stack_depot_save+0x35/0x4c0
[  826.474779]  ? kasan_save_stack+0x2e/0x40
[  826.475149]  ? kasan_save_stack+0x1e/0x40
[  826.475518]  ? __kasan_record_aux_stack+0x9f/0xb0
[  826.475939]  ? task_work_add+0x77/0x1c0
[  826.476305]  netlink_rcv_skb+0xe0/0x210
[  826.476661]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  826.477057]  ? netlink_ack+0x7c0/0x7c0
[  826.477412]  ? rhashtable_jhash2+0xef/0x150
[  826.477796]  ? _copy_from_iter+0x105/0x770
[  826.484386]  netlink_unicast+0x346/0x490
[  826.484755]  ? netlink_attachskb+0x400/0x400
[  826.485145]  ? kernel_text_address+0xc2/0xd0
[  826.485535]  netlink_sendmsg+0x3b0/0x6c0
[  826.485902]  ? kernel_text_address+0xc2/0xd0
[  826.486296]  ? netlink_unicast+0x490/0x490
[  826.486671]  ? iovec_from_user.part.0+0x7a/0x1a0
[  826.487083]  ? netlink_unicast+0x490/0x490
[  826.487461]  sock_sendmsg+0x73/0xc0
[  826.487803]  ____sys_sendmsg+0x364/0x380
[  826.488186]  ? import_iovec+0x7/0x10
[  826.488531]  ? kernel_sendmsg+0x30/0x30
[  826.488893]  ? __copy_msghdr+0x180/0x180
[  826.489258]  ? kasan_save_stack+0x2e/0x40
[  826.489629]  ? kasan_save_stack+0x1e/0x40
[  826.490002]  ? __kasan_record_aux_stack+0x9f/0xb0
[  826.490424]  ? __call_rcu_common.constprop.0+0x46/0x580
[  826.490876]  ___sys_sendmsg+0xdf/0x140
[  826.491231]  ? copy_msghdr_from_user+0x110/0x110
[  826.491649]  ? fget_raw+0x120/0x120
[  826.491988]  ? ___sys_recvmsg+0xd9/0x130
[  826.492355]  ? folio_batch_add_and_move+0x80/0xa0
[  826.492776]  ? _raw_spin_lock+0x7a/0xd0
[  826.493137]  ? _raw_spin_lock+0x7a/0xd0
[  826.493500]  ? _raw_read_lock_irq+0x30/0x30
[  826.493880]  ? kasan_set_track+0x21/0x30
[  826.494249]  ? kasan_save_free_info+0x2a/0x40
[  826.494650]  ? do_sys_openat2+0xff/0x270
[  826.495016]  ? __fget_light+0x1b5/0x200
[  826.495377]  ? __virt_addr_valid+0xb1/0x130
[  826.495763]  __sys_sendmsg+0xb2/0x130
[  826.496118]  ? __sys_sendmsg_sock+0x20/0x20
[  826.496501]  ? __x64_sys_rseq+0x2e0/0x2e0
[  826.496874]  ? do_user_addr_fault+0x276/0x820
[  826.497273]  ? fpregs_assert_state_consistent+0x52/0x60
[  826.497727]  ? exit_to_user_mode_prepare+0x30/0x120
[  826.498158]  do_syscall_64+0x3d/0x90
[  826.498502]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  826.498949] RIP: 0033:0x7f9b67f4f887
[  826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887
[  826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003
[  826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
[  826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001
[  826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400
[  826.504304]  </TASK>

[  826.504753] Allocated by task 3764:
[  826.505090]  kasan_save_stack+0x1e/0x40
[  826.505453]  kasan_set_track+0x21/0x30
[  826.505810]  __kasan_kmalloc+0x77/0x90
[  826.506164]  __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core]
[  826.506742]  esw_offloads_enable+0x60d/0xfb0 [mlx5_core]
[  826.507292]  mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core]
[  826.507885]  mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core]
[  826.508513]  devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[  826.508969]  genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[  826.509427]  genl_rcv_msg+0x28d/0x3e0
[  826.509772]  netlink_rcv_skb+0xe0/0x210
[  826.510133]  genl_rcv+0x24/0x40
[  826.510448]  netlink_unicast+0x346/0x490
[  826.510810]  netlink_sendmsg+0x3b0/0x6c0
[  826.511179]  sock_sendmsg+0x73/0xc0
[  826.511519]  __sys_sendto+0x18d/0x220
[  826.511867]  __x64_sys_sendto+0x72/0x80
[  826.512232]  do_syscall_64+0x3d/0x90
[  826.512576]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  826.513220] Freed by task 5674:
[  826.513535]  kasan_save_stack+0x1e/0x40
[  826.513893]  kasan_set_track+0x21/0x30
[  826.514245]  kasan_save_free_info+0x2a/0x40
[  826.514629]  ____kasan_slab_free+0x11a/0x1b0
[  826.515021]  __kmem_cache_free+0x14d/0x280
[  826.515399]  tree_put_node+0x109/0x1c0 [mlx5_core]
[  826.515907]  mlx5_destroy_flow_table+0x119/0x630 [mlx5_core]
[  826.516481]  esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core]
[  826.517084]  esw_offloads_disable+0xe0/0x160 [mlx5_core]
[  826.517632]  mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[  826.518225]  mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[  826.518834]  devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[  826.519286]  genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[  826.519748]  genl_rcv_msg+0x28d/0x3e0
[  826.520101]  netlink_rcv_skb+0xe0/0x210
[  826.520458]  genl_rcv+0x24/0x40
[  826.520771]  netlink_unicast+0x346/0x490
[  826.521137]  netlink_sendmsg+0x3b0/0x6c0
[  826.521505]  sock_sendmsg+0x73/0xc0
[  826.521842]  __sys_sendto+0x18d/0x220
[  826.522191]  __x64_sys_sendto+0x72/0x80
[  826.522554]  do_syscall_64+0x3d/0x90
[  826.522894]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  826.523540] Last potentially related work creation:
[  826.523969]  kasan_save_stack+0x1e/0x40
[  826.524331]  __kasan_record_aux_stack+0x9f/0xb0
[  826.524739]  insert_work+0x30/0x130
[  826.525078]  __queue_work+0x34b/0x690
[  826.525426]  queue_work_on+0x48/0x50
[  826.525766]  __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core]
[  826.526365]  del_sw_flow_group+0x1b5/0x270 [mlx5_core]
[  826.526898]  tree_put_node+0x109/0x1c0 [mlx5_core]
[  826.527407]  esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core]
[  826.528009]  esw_offloads_disable+0xe0/0x160 [mlx5_core]
[  826.528616]  mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[  826.529218]  mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[  826.529823]  devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[  826.530276]  genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[  826.530733]  genl_rcv_msg+0x28d/0x3e0
[  826.531079]  netlink_rcv_skb+0xe0/0x210
[  826.531439]  genl_rcv+0x24/0x40
[  826.531755]  netlink_unicast+0x346/0x490
[  826.532123]  netlink_sendmsg+0x3b0/0x6c0
[  826.532487]  sock_sendmsg+0x73/0xc0
[  826.532825]  __sys_sendto+0x18d/0x220
[  826.533175]  __x64_sys_sendto+0x72/0x80
[  826.533533]  do_syscall_64+0x3d/0x90
[  826.533877]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  826.534521] The buggy address belongs to the object at ffff888194485800
                which belongs to the cache kmalloc-512 of size 512
[  826.535506] The buggy address is located 48 bytes inside of
                freed 512-byte region [ffff888194485800, ffff888194485a00)

[  826.536666] The buggy address belongs to the physical page:
[  826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480
[  826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[  826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2)
[  826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002
[  826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[  826.540417] page dumped because: kasan: bad access detected

[  826.541095] Memory state around the buggy address:
[  826.541519]  ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  826.542149]  ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  826.543400]                                      ^
[  826.543822]  ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  826.544452]  ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  826.545079] ==================================================================

Fixes: 67027828 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.

Fixes: 1880bc4e ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:

- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.

- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.

- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.

[0]:

[  164.599612] ======================================================
[  164.600142] WARNING: possible circular locking dependency detected
[  164.600667] 6.3.0-rc3+ #1 Not tainted
[  164.601021] ------------------------------------------------------
[  164.601557] handler1/3456 is trying to acquire lock:
[  164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.603078]
               but task is already holding lock:
[  164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.604459]
               which lock already depends on the new lock.

[  164.605190]
               the existing dependency chain (in reverse order) is:
[  164.605848]
               -> #1 (&comp->sem){++++}-{3:3}:
[  164.606380]        down_read+0x39/0x50
[  164.606772]        mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.607336]        mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[  164.607914]        mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[  164.608495]        mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[  164.609063]        mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[  164.609627]        __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.610175]        mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[  164.610741]        tc_setup_cb_add+0xd4/0x200
[  164.611146]        fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.611661]        fl_change+0xc95/0x18a0 [cls_flower]
[  164.612116]        tc_new_tfilter+0x3fc/0xd20
[  164.612516]        rtnetlink_rcv_msg+0x418/0x5b0
[  164.612936]        netlink_rcv_skb+0x54/0x100
[  164.613339]        netlink_unicast+0x190/0x250
[  164.613746]        netlink_sendmsg+0x245/0x4a0
[  164.614150]        sock_sendmsg+0x38/0x60
[  164.614522]        ____sys_sendmsg+0x1d0/0x1e0
[  164.614934]        ___sys_sendmsg+0x80/0xc0
[  164.615320]        __sys_sendmsg+0x51/0x90
[  164.615701]        do_syscall_64+0x3d/0x90
[  164.616083]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.616568]
               -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[  164.617210]        __lock_acquire+0x159e/0x26e0
[  164.617638]        lock_acquire+0xc2/0x2a0
[  164.618018]        __mutex_lock+0x92/0xcd0
[  164.618401]        mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.618943]        post_process_attr+0x153/0x2d0 [mlx5_core]
[  164.619471]        mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[  164.620021]        __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.620564]        mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[  164.621125]        tc_setup_cb_add+0xd4/0x200
[  164.621531]        fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.622047]        fl_change+0xc95/0x18a0 [cls_flower]
[  164.622500]        tc_new_tfilter+0x3fc/0xd20
[  164.622906]        rtnetlink_rcv_msg+0x418/0x5b0
[  164.623324]        netlink_rcv_skb+0x54/0x100
[  164.623727]        netlink_unicast+0x190/0x250
[  164.624138]        netlink_sendmsg+0x245/0x4a0
[  164.624544]        sock_sendmsg+0x38/0x60
[  164.624919]        ____sys_sendmsg+0x1d0/0x1e0
[  164.625340]        ___sys_sendmsg+0x80/0xc0
[  164.625731]        __sys_sendmsg+0x51/0x90
[  164.626117]        do_syscall_64+0x3d/0x90
[  164.626502]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.626995]
               other info that might help us debug this:

[  164.627725]  Possible unsafe locking scenario:

[  164.628268]        CPU0                    CPU1
[  164.628683]        ----                    ----
[  164.629098]   lock(&comp->sem);
[  164.629421]                                lock(&esw->offloads.encap_tbl_lock);
[  164.630066]                                lock(&comp->sem);
[  164.630555]   lock(&esw->offloads.encap_tbl_lock);
[  164.630993]
                *** DEADLOCK ***

[  164.631575] 3 locks held by handler1/3456:
[  164.631962]  #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[  164.632703]  #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[  164.633552]  #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.634435]
               stack backtrace:
[  164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1
[  164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  164.636340] Call Trace:
[  164.636616]  <TASK>
[  164.636863]  dump_stack_lvl+0x47/0x70
[  164.637217]  check_noncircular+0xfe/0x110
[  164.637601]  __lock_acquire+0x159e/0x26e0
[  164.637977]  ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core]
[  164.638472]  lock_acquire+0xc2/0x2a0
[  164.638828]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.639339]  ? lock_is_held_type+0x98/0x110
[  164.639728]  __mutex_lock+0x92/0xcd0
[  164.640074]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.640576]  ? __lock_acquire+0x382/0x26e0
[  164.640958]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.641468]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.641965]  mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.642454]  ? lock_release+0xbf/0x240
[  164.642819]  post_process_attr+0x153/0x2d0 [mlx5_core]
[  164.643318]  mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[  164.643835]  __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.644340]  mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[  164.644862]  ? lock_acquire+0xc2/0x2a0
[  164.645219]  tc_setup_cb_add+0xd4/0x200
[  164.645588]  fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.646067]  fl_change+0xc95/0x18a0 [cls_flower]
[  164.646488]  tc_new_tfilter+0x3fc/0xd20
[  164.646861]  ? tc_del_tfilter+0x810/0x810
[  164.647236]  rtnetlink_rcv_msg+0x418/0x5b0
[  164.647621]  ? rtnl_setlink+0x160/0x160
[  164.647982]  netlink_rcv_skb+0x54/0x100
[  164.648348]  netlink_unicast+0x190/0x250
[  164.648722]  netlink_sendmsg+0x245/0x4a0
[  164.649090]  sock_sendmsg+0x38/0x60
[  164.649434]  ____sys_sendmsg+0x1d0/0x1e0
[  164.649804]  ? copy_msghdr_from_user+0x6d/0xa0
[  164.650213]  ___sys_sendmsg+0x80/0xc0
[  164.650563]  ? lock_acquire+0xc2/0x2a0
[  164.650926]  ? lock_acquire+0xc2/0x2a0
[  164.651286]  ? __fget_files+0x5/0x190
[  164.651644]  ? find_held_lock+0x2b/0x80
[  164.652006]  ? __fget_files+0xb9/0x190
[  164.652365]  ? lock_release+0xbf/0x240
[  164.652723]  ? __fget_files+0xd3/0x190
[  164.653079]  __sys_sendmsg+0x51/0x90
[  164.653435]  do_syscall_64+0x3d/0x90
[  164.653784]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.654229] RIP: 0033:0x7f378054f8bd
[  164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48
[  164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[  164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd
[  164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014
[  164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c
[  164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0
[  164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540

Fixes: f9d196bd ("net/mlx5e: Use correct eswitch for stack devices with lag")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix spacing for the error and also the correct error code pointer.

Fixes: c9b9dcb4 ("net/mlx5: Move device memory management to mlx5_core")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.

[0]:

Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel:  <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel:  mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel:  worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? __kthread_parkme+0xd9/0x1d0

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.

Fixes: 7304d603 ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.

The solution is to switch the bytes from the crc result for all types
of arc.

Fixes: 40416d8e ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.

The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.

[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.

[  157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[  157.964662 ] #PF: supervisor read access in kernel mode
[  157.965123 ] #PF: error_code(0x0000) - not-present page
[  157.965582 ] PGD 0 P4D 0
[  157.965866 ] Oops: 0000 [#1] SMP
[  157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[  157.976164 ] Call Trace:
[  157.976437 ]  <TASK>
[  157.976690 ]  __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[  157.977230 ]  mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[  157.977767 ]  mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[  157.984653 ]  mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[  157.985212 ]  mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[  157.985714 ]  esw_offloads_disable+0x5a/0x110 [mlx5_core]
[  157.986209 ]  mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[  157.986757 ]  mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[  157.987248 ]  mlx5_unload+0x2a/0xb0 [mlx5_core]
[  157.987678 ]  mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[  157.988127 ]  remove_one+0x64/0xe0 [mlx5_core]
[  157.988549 ]  pci_device_remove+0x31/0xa0
[  157.988933 ]  device_release_driver_internal+0x18f/0x1f0
[  157.989402 ]  driver_detach+0x3f/0x80
[  157.989754 ]  bus_remove_driver+0x70/0xf0
[  157.990129 ]  pci_unregister_driver+0x34/0x90
[  157.990537 ]  mlx5_cleanup+0xc/0x1c [mlx5_core]
[  157.990972 ]  __x64_sys_delete_module+0x15a/0x250
[  157.991398 ]  ? exit_to_user_mode_prepare+0xea/0x110
[  157.991840 ]  do_syscall_64+0x3d/0x90
[  157.992198 ]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd9 ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.

Fix it by checking whether the command is known before collecting the
failure data.

Fixes: 34f46ae0 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

	sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL);
	^^^^                         ^^^^

sock_alloc_file() calls release_sock() on error but the left hand
side of the assignment dereferences "sock".  This isn't the bug and
I didn't report this earlier because there is an assert that it
doesn't fail.

net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed.
net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed.
net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed.
net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Should tc589_config() fail, some resources need to be released as already
done in the remove function.

Fixes: 15b99ac1 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.

Add it in the error handling path of the probe as already done in the
remove function.

Fixes: cac1c52c ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.

However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.

Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.

Fixes: b87641af ("sctp: do state transition when a probe succeeds on HB ACK recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix compiler warnings on btnxpuart
 - Fix potential double free on hci_conn_unlink
 - Fix UAF on hci_conn_hash_flush

* tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: btnxpuart: Fix compiler warnings
  Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
  Bluetooth: Fix UAF in hci_conn_hash_flush again
  Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
  Bluetooth: Fix potential double free caused by hci_conn_unlink
====================

Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>