commit a04e23d4 upstream.

Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure
if this is a late addition to the spec, or if I simply overlooked this
step when writing the original code.

This is what Bspec has to say about CDCLK_FREQ:
"Program this field to the CD clock frequency minus one. This is used to
 generate a divided down clock for miscellaneous timers in display."

And the "Broadwell Sequences for Changing CD Clock Frequency" section
clarifies this further:
"For CD clock 337.5 MHz, program 337 decimal.
 For CD clock 450 MHz, program 449 decimal.
 For CD clock 540 MHz, program 539 decimal.
 For CD clock 675 MHz, program 674 decimal."

Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: b432e5cf ("drm/i915: BDW clock change support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7f1052a8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 93f0750d upstream.

This patch causes a Kernel panic when called on a DVB driver.

This was also reported by David R <david@unsolicited.net>:

May  7 14:47:35 server kernel: [  501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
May  7 14:47:35 server kernel: [  501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.247354] PGD cae6f067 PUD ca99c067 PMD 0
May  7 14:47:35 server kernel: [  501.247426] Oops: 0000 [#1] SMP
May  7 14:47:35 server kernel: [  501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport
May  7 14:47:35 server kernel: [  501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3
May  7 14:47:35 server kernel: [  501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211    07/08/2009
May  7 14:47:35 server kernel: [  501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000
May  7 14:47:35 server kernel: [  501.249861] RIP: 0010:[<ffffffffa0222c71>]  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.250002] RSP: 0018:ffff8801e07a3de8  EFLAGS: 00010086
May  7 14:47:35 server kernel: [  501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283
May  7 14:47:35 server kernel: [  501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014
May  7 14:47:35 server kernel: [  501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000
May  7 14:47:35 server kernel: [  501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8
May  7 14:47:35 server kernel: [  501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828
May  7 14:47:35 server kernel: [  501.250528] FS:  00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40
May  7 14:47:35 server kernel: [  501.250631] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
May  7 14:47:35 server kernel: [  501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0
May  7 14:47:35 server kernel: [  501.250794] Stack:
May  7 14:47:35 server kernel: [  501.250822]  ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb
May  7 14:47:35 server kernel: [  501.250937]  0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000
May  7 14:47:35 server kernel: [  501.251051]  ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38
May  7 14:47:35 server kernel: [  501.251165] Call Trace:
May  7 14:47:35 server kernel: [  501.251200]  [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.251306]  [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251398]  [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100
May  7 14:47:35 server kernel: [  501.251482]  [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251569]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251662]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.255982]  [<ffffffff8106f984>] kthread+0xc4/0xe0
May  7 14:47:35 server kernel: [  501.260292]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.264615]  [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70
May  7 14:47:35 server kernel: [  501.268962]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e
May  7 14:47:35 server kernel: [  501.282146] RIP  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.286391]  RSP <ffff8801e07a3de8>
May  7 14:47:35 server kernel: [  501.290619] CR2: 0000000000000004
May  7 14:47:35 server kernel: [  501.294786] ---[ end trace b2b354153ccad110 ]---

This reverts commit 2c1f6951.

Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Fixes: 2c1f6951 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing")
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ae645d5 upstream.

NULL pointer derefence happens when booting with DTB because the
platform data for haptic device is not set in supplied data from parent
MFD device.

The MFD device creates only platform data (from Device Tree) for itself,
not for haptic child.

Unable to handle kernel NULL pointer dereference at virtual address 0000009c
pgd = c0004000
	[0000009c] *pgd=00000000
	Internal error: Oops: 5 [#1] PREEMPT SMP ARM
	(max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0)
	(platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0)
	(driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0)
	(__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c)
	(bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218)
	(bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8)
	(driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8)
	(do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
	(kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114)
	(kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 104594b0 ("Input: add driver support for MAX8997-haptic")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 99d82582 upstream.

Payloads of NM entries are not supposed to contain NUL.  When we run
into such, only the part prior to the first NUL goes into the
concatenation (i.e. the directory entry name being encoded by a bunch
of NM entries).  We do stop when the amount collected so far + the
claimed amount in the current NM entry exceed 254.  So far, so good,
but what we return as the total length is the sum of *claimed*
sizes, not the actual amount collected.  And that can grow pretty
large - not unlimited, since you'd need to put CE entries in
between to be able to get more than the maximum that could be
contained in one isofs directory entry / continuation chunk and
we are stop once we'd encountered 32 CEs, but you can get about 8Kb
easily.  And that's what will be passed to readdir callback as the
name length.  8Kb __copy_to_user() from a buffer allocated by
__get_free_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 106b816c upstream.

At the end of process_filter(), collapse_tree() was changed to update
the parg parameter, but the reassignment after the call wasn't removed.

What happens is that the "current_op" gets modified and freed and parg
is assigned to the new allocated argument. But after the call to
collapse_tree(), parg is assigned again to the just freed "current_op",
and this causes the tool to crash.

The current_op variable must also be assigned to NULL in case of error,
otherwise it will cause it to be free()ed twice.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 42d6194d ("tools lib traceevent: Refactor process_filter()")
Link: http://lkml.kernel.org/r/20160511150936.678c18a1@gandalf.local.homeSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2bcbc814 upstream.

The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff
which results in an allocation failure when allocating the block layer tags
for the driver's queues. This was introduced with the change for host wide
tags in commit 64d513ac - "scsi: use host wide tags by default".

Reduce can_queue to MAX_OUTSTANDING_COMMANDS (512) to solve the allocation
error.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 64d513ac - "scsi: use host wide tags by default"
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michael Reed <mdr@sgi.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 10c64cea upstream.

* if we have a hashed negative dentry and either CREAT|EXCL on
r/o filesystem, or CREAT|TRUNC on r/o filesystem, or CREAT|EXCL
with failing may_o_create(), we should fail with EROFS or the
error may_o_create() has returned, but not ENOENT.  Which is what
the current code ends up returning.

* if we have CREAT|TRUNC hitting a regular file on a read-only
filesystem, we can't fail with EROFS here.  At the very least,
not until we'd done follow_managed() - we might have a writable
file (or a device, for that matter) bound on top of that one.
Moreover, the code downstream will see that O_TRUNC and attempt
to grab the write access (*after* following possible mount), so
if we really should fail with EROFS, it will happen.  No need
to do that inside atomic_open().

The real logics is much simpler than what the current code is
trying to do - if we decided to go for simple lookup, ended
up with a negative dentry *and* had create_error set, fail with
create_error.  No matter whether we'd got that negative dentry
from lookup_real() or had found it in dcache.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a2262e5a upstream.

The minium voltage of 1800mV is a copy and paste error from the axp20x
regulator info. The correct minimum voltage for the ldo_io regulators
on the axp22x is 700mV.

Fixes: 1b82b4e4 ("regulator: axp20x: Add support for AXP22X regulators")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b672623 upstream.

The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff
instead of 0x1f) thus reading entire register as buck9's voltage. This
effectively caused regulator core to interpret values as higher voltages
than they were and then to set real voltage much lower than intended.

The buck9 provides power to other regulators, including LDO13
and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower
voltage caused SD card detection errors on Odroid XU3/XU4:
	mmc1: card never left busy state
	mmc1: error -110 whilst initialising SD card

During driver probe the regulator core was checking whether initial
voltage matches the constraints. With incorrect vsel_mask of 0xff and
default value of 0x50, the core interpreted this as 5 V which is outside
of constraints (3-3.775 V). Then the regulator core was adjusting the
voltage to match the constraints. With incorrect vsel_mask this new
voltage mapped to a vere low voltage in the driver.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7c17d26 upstream.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0
Modules linked in:
CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31
Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013
 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010
 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8
 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046
Call Trace:
 dump_stack+0x89/0xd4
 __warn+0xfd/0x120
 warn_slowpath_null+0x1d/0x20
 rebind_workers+0x1c0/0x1d0
 workqueue_cpu_up_callback+0xf5/0x1d0
 notifier_call_chain+0x64/0x90
 ? trace_hardirqs_on_caller+0xf2/0x220
 ? notify_prepare+0x80/0x80
 __raw_notifier_call_chain+0xe/0x10
 __cpu_notify+0x35/0x50
 notify_down_prepare+0x5e/0x80
 ? notify_prepare+0x80/0x80
 cpuhp_invoke_callback+0x73/0x330
 ? __schedule+0x33e/0x8a0
 cpuhp_down_callbacks+0x51/0xc0
 cpuhp_thread_fun+0xc1/0xf0
 smpboot_thread_fn+0x159/0x2a0
 ? smpboot_create_threads+0x80/0x80
 kthread+0xef/0x110
 ? wait_for_completion+0xf0/0x120
 ? schedule_tail+0x35/0xf0
 ret_from_fork+0x22/0x50
 ? __init_kthread_worker+0x70/0x70
---[ end trace eb12ae47d2382d8f ]---
notify_down_prepare: attempt to take down CPU 0 failed

This bug can be reproduced by below config w/ nohz_full= all cpus:

CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_NO_HZ_FULL=y

As Thomas pointed out:

| If a down prepare callback fails, then DOWN_FAILED is invoked for all
| callbacks which have successfully executed DOWN_PREPARE.
|
| But, workqueue has actually two notifiers. One which handles
| UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE.
|
| Now look at the priorities of those callbacks:
|
| CPU_PRI_WORKQUEUE_UP        = 5
| CPU_PRI_WORKQUEUE_DOWN      = -5
|
| So the call order on DOWN_PREPARE is:
|
| CB 1
| CB ...
| CB workqueue_up() -> Ignores DOWN_PREPARE
| CB ...
| CB X ---> Fails
|
| So we call up to CB X with DOWN_FAILED
|
| CB 1
| CB ...
| CB workqueue_up() -> Handles DOWN_FAILED
| CB ...
| CB X-1
|
| So the problem is that the workqueue stuff handles DOWN_FAILED in the up
| callback, while it should do it in the down callback. Which is not a good idea
| either because it wants to be called early on rollback...
|
| Brilliant stuff, isn't it? The hotplug rework will solve this problem because
| the callbacks become symetric, but for the existing mess, we need some
| workaround in the workqueue code.

The boot CPU handles housekeeping duty(unbound timers, workqueues,
timekeeping, ...) on behalf of full dynticks CPUs. It must remain
online when nohz full is enabled. There is a priority set to every
notifier_blocks:

workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down

So tick_nohz_cpu_down callback failed when down prepare cpu 0, and
notifier_blocks behind tick_nohz_cpu_down will not be called any
more, which leads to workers are actually not unbound. Then hotplug
state machine will fallback to undo and online cpu 0 again. Workers
will be rebound unconditionally even if they are not unbound and
trigger the warning in this progress.

This patch fix it by catching !DISASSOCIATED to avoid rebind bound
workers.

Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aab0a4c8 upstream.

The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.

This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Fixes: 863a81c3 ("clk: at91: make use of syscon to share PMC registers in several drivers")
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9409e22a upstream.

If a file is renamed to a hardlink of itself POSIX specifies that rename(2)
should do nothing and return success.

This condition is checked in vfs_rename().  However it won't detect hard
links on overlayfs where these are given separate inodes on the overlayfs
layer.

Overlayfs itself detects this condition and returns success without doing
anything, but then vfs_rename() will proceed as if this was a successful
rename (detach_mounts(), d_move()).

The correct thing to do is to detect this condition before even calling
into overlayfs.  This patch does this by calling vfs_select_inode() to get
the underlying inodes.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54d5ca87 upstream.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9f448cd3 upstream.

When the PMU driver reports a truncated AUX record, it effectively means
that there is no more usable room in the event's AUX buffer (even though
there may still be some room, so that perf_aux_output_begin() doesn't take
action). At this point the consumer still has to be woken up and the event
has to be disabled, otherwise the event will just keep spinning between
perf_aux_output_begin() and perf_aux_output_end() until its context gets
unscheduled.

Again, for cpu-wide events this means never, so once in this condition,
they will be forever losing data.

Fix this by disabling the event and waking up the consumer in case of a
truncated AUX record.
Reported-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1462886313-13660-3-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9d848cb upstream.

The commit b97511c5 ("perf tools: Add overhead/overhead_children
keys defaults via string") moved initialization of column headers but it
missed to check the sort__mode.  As 'perf diff' doesn't call
perf_hpp__init(), the setup_overhead() also should not be called.

Before:

  # Baseline    Delta  Children  Overhead  Shared Object        Symbol
  # ........  .......  ........  ........  ...................  .......................
  #
      28.48%  -28.47%    28.48%    28.48%  [kernel.vmlinux ]    [k] intel_idle
      11.51%  -11.47%    11.51%    11.51%  libxul.so            [.] 0x0000000001a360f7
       3.49%   -3.49%     3.49%     3.49%  [kernel.vmlinux]     [k] generic_exec_single
       2.91%   -2.89%     2.91%     2.91%  libdbus-1.so.3.8.11  [.] 0x000000000000cdc2
       2.86%   -2.85%     2.86%     2.86%  libxcb.so.1.1.0      [.] 0x000000000000c890
       2.44%   -2.39%     2.44%     2.44%  [kernel.vmlinux]     [k] perf_event_aux_ctx

After:

  # Baseline    Delta  Shared Object        Symbol
  # ........  .......  ...................  .......................
  #
      28.48%  -28.47%  [kernel.vmlinux]     [k] intel_idle
      11.51%  -11.47%  libxul.so            [.] 0x0000000001a360f7
       3.49%   -3.49%  [kernel.vmlinux]     [k] generic_exec_single
       2.91%   -2.89%  libdbus-1.so.3.8.11  [.] 0x000000000000cdc2
       2.86%   -2.85%  libxcb.so.1.1.0      [.] 0x000000000000c890
       2.44%   -2.39%  [kernel.vmlinux]     [k] perf_event_aux_ctx
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b97511c5 ("perf tools: Add overhead/overhead_children keys defaults via string")
Link: http://lkml.kernel.org/r/1462890384-12486-2-git-send-email-acme@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dec8e8f6 upstream.

Specifically for the case of reads that use the Extended Register
Read Long command, a multi-byte read operation is broken up into
8-byte chunks.  However the call to spmi_ext_register_readl() is
incorrectly passing 'val_size', which if greater than 8 will
always fail.  The argument should instead be 'len'.

Fixes: c9afbb05 ("regmap: spmi: support base and extended register spaces")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5305a7b7 upstream.

The default configuration of a pin is often with a value in the
pull-up/down field at chip reset. So, even if the internal logic of the
controller prevents writing a configuration with pull-up and pull-down at
the same time, we must ensure explicitly this condition before writing the
register.

This was leading to a pull-down condition not taken into account for
instance.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 77618084 ("pinctrl: introduce driver for Atmel PIO4 controller")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ff7760f upstream.

We clamp frame_len_words to a maximum of 4096, but do not actually
limit the number of words written or read through the DATA registers
or the length added to spi_message::actual_length.  This results in
silent data corruption for commands longer than this maximum.

Recalculate the length of each transfer, taking frame_len_words into
account.  Use this length in qspi_{read,write}_msg(), and to increment
spi_message::actual_length.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea1b60fb upstream.

Each transfer can specify 8, 16 or 32 bits per word independently of
the default for the device being addressed.  However, currently we
calculate the number of words in the frame assuming that the word size
is the device default.

If multiple transfers in the same message have differing
bits_per_word, we bitwise-or the different values in the WLEN register
field.

Fix both of these.  Also rename 'frame_length' to 'frame_len_words' to
make clear that it's not a byte count like spi_message::frame_length.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 66ec246e upstream.

Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI
capabilities register even they have one per port. Detection in
pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL
from spi_register_master() where chip select count is validated.

Fix this by not using SPI capabilities register on Sunrisepoint. They don't
have more than one chip select so use the default value 1 instead of
detection.

Fixes: 8b136baa ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit addacd80 upstream.

The HD-audio reconfig function got broken in the recent kernels,
typically resulting in a failure like:
  snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present

This is because of the code restructuring to move the PCM and control
instantiation into the codec drive probe, by the commit [bcd96557:
ALSA: hda - Build PCMs and controls at codec driver probe].  Although
the commit above removed the calls of snd_hda_codec_build_pcms() and
*_build_controls() at the controller driver probe, the similar calls
in the reconfig were still left forgotten.  This caused the
conflicting and duplicated PCMs and controls.

The fix is trivial: just remove these superfluous calls from
reconfig_codec().

Fixes: bcd96557 ('ALSA: hda - Build PCMs and controls at codec driver probe')
Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2da2dc9e upstream.

For reducing the noise from the headset output on ASUS UX501VW,
call the existing fixup, alc_fixup_headset_mode_alc668(), additionally.

Thread: https://bbs.archlinux.org/viewtopic.php?id=209554Signed-off-by: Kaho Ng <ngkaho1234@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3231e205 upstream.

Subwoofer does not work out of the box on ASUS N751/N551 laptops. This
patch fixes it. Patch tested on N751 laptop. N551 part is not tested,
but according to [1] and [2] this laptop requires similar changes, so I
included them in the patch.

1. https://github.com/honsiorovskyi/asus-n551-hda-fix
2. https://bugs.launchpad.net/ubuntu/+source/alsa-tools/+bug/1405691

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117781Signed-off-by: Yura Pakhuchiy <pakhuchiy@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 84add303 upstream.

Phoenix Audio has yet another device with another id (even a different
vendor id, 0556:0014) that requires the same quirk for the sample
rate.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d2c038a upstream.

Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the
same workaround as TMX320 for avoiding the firmware bug.  It fixes the
frequent error about the sample rate inquiries and the slow device
probe as consequence.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df27b26f upstream.

As akcipher uses an SG interface, you must not use vmalloc memory
as input for it.  This patch fixes testmgr to copy the vmalloc
test vectors to kmalloc memory before running the test.

This patch also removes a superfluous sg_virt call in do_test_rsa.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13f4bb78 upstream.

The crypto hash walk code is broken when supplied with an offset
greater than or equal to PAGE_SIZE.  This patch fixes it by adjusting
walk->pg and walk->offset when this happens.
Reported-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6dc5df71 upstream.

Fix undefined reference issue reported by kbuild test robot.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e209fcf upstream.

The pf2vf_resp_wq is a global so it has to be created at init
and destroyed at exit, instead of per device.
Tested-by: Suresh Marikkannu <sureshx.marikkannu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d0a07ed upstream.

This will provide fully accuracy to the mapcount calculation in the
write protect faults, so page pinning will not get broken by false
positive copy-on-writes.

total_mapcount() isn't the right calculation needed in
reuse_swap_page(), so this introduces a page_trans_huge_mapcount()
that is effectively the full accurate return value for page_mapcount()
if dealing with Transparent Hugepages, however we only use the
page_trans_huge_mapcount() during COW faults where it strictly needed,
due to its higher runtime cost.

This also provide at practical zero cost the total_mapcount
information which is needed to know if we can still relocate the page
anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we
can reuse the page no matter if it's a pte or a pmd_trans_huge
triggering the fault, but we can only relocate the page anon_vma to
the local vma->anon_vma if we're sure it's only this "vma" mapping the
whole THP physical range.

Kirill A. Shutemov discovered the problem with moving the page
anon_vma to the local vma->anon_vma in a previous version of this
patch and another problem in the way page_move_anon_rmap() was called.

Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a
previous version, because reuse_swap_page must be a macro to call
page_trans_huge_mapcount from swap.h, so this uses a macro again
instead of an inline function. With this change at least it's a less
dangerous usage than it was before, because "page" is used only once
now, while with the previous code reuse_swap_page(page++) would have
called page_mapcount on page+1 and it would have increased page twice
instead of just once.

Dean Luick noticed an uninitialized variable that could result in a
rmap inefficiency for the non-THP case in a previous version.

Mike Marciniszyn said:

: Our RDMA tests are seeing an issue with memory locking that bisects to
: commit 61f5d698 ("mm: re-enable THP")
:
: The test program registers two rather large MRs (512M) and RDMA
: writes data to a passive peer using the first and RDMA reads it back
: into the second MR and compares that data.  The sizes are chosen randomly
: between 0 and 1024 bytes.
:
: The test will get through a few (<= 4 iterations) and then gets a
: compare error.
:
: Tracing indicates the kernel logical addresses associated with the individual
: pages at registration ARE correct , the data in the "RDMA read response only"
: packets ARE correct.
:
: The "corruption" occurs when the packet crosse two pages that are not physically
: contiguous.   The second page reads back as zero in the program.
:
: It looks like the user VA at the point of the compare error no longer points to
: the same physical address as was registered.
:
: This patch totally resolves the issue!

Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.comSigned-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Josh Collier <josh.d.collier@intel.com>
Cc: Marc Haber <mh+linux-kernel@zugschlus.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 44f43e99 upstream.

zs_can_compact() has two race conditions in its core calculation:

unsigned long obj_wasted = zs_stat_get(class, OBJ_ALLOCATED) -
				zs_stat_get(class, OBJ_USED);

1) classes are not locked, so the numbers of allocated and used
   objects can change by the concurrent ops happening on other CPUs
2) shrinker invokes it from preemptible context

Depending on the circumstances, thus, OBJ_ALLOCATED can become
less than OBJ_USED, which can result in either very high or
negative `total_scan' value calculated later in do_shrink_slab().

do_shrink_slab() has some logic to prevent those cases:

 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-64
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62
 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62

However, due to the way `total_scan' is calculated, not every
shrinker->count_objects() overflow can be spotted and handled.
To demonstrate the latter, I added some debugging code to do_shrink_slab()
(x86_64) and the results were:

 vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615]
 vmscan: but total_scan > 0: 92679974445502
 vmscan: resulting total_scan: 92679974445502
[..]
 vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615]
 vmscan: but total_scan > 0: 22634041808232578
 vmscan: resulting total_scan: 22634041808232578

Even though shrinker->count_objects() has returned an overflowed value,
the resulting `total_scan' is positive, and, what is more worrisome, it
is insanely huge. This value is getting used later on in
shrinker->scan_objects() loop:

        while (total_scan >= batch_size ||
               total_scan >= freeable) {
                unsigned long ret;
                unsigned long nr_to_scan = min(batch_size, total_scan);

                shrinkctl->nr_to_scan = nr_to_scan;
                ret = shrinker->scan_objects(shrinker, shrinkctl);
                if (ret == SHRINK_STOP)
                        break;
                freed += ret;

                count_vm_events(SLABS_SCANNED, nr_to_scan);
                total_scan -= nr_to_scan;

                cond_resched();
        }

`total_scan >= batch_size' is true for a very-very long time and
'total_scan >= freeable' is also true for quite some time, because
`freeable < 0' and `total_scan' is large enough, for example,
22634041808232578. The only break condition, in the given scheme of
things, is shrinker->scan_objects() == SHRINK_STOP test, which is a
bit too weak to rely on, especially in heavy zsmalloc-usage scenarios.

To fix the issue, take a pool stat snapshot and use it instead of
racy zs_stat_get() calls.

Link: http://lkml.kernel.org/r/20160509140052.3389-1-sergey.senozhatsky@gmail.comSigned-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c25a1e06 upstream.

Commit 702e5bc6 ("ocfs2: use generic posix ACL infrastructure")
refactored code to use posix_acl_create.  The problem with this function
is that it is not mindful of the cluster wide inode lock making it
unsuitable for use with ocfs2 inode creation with ACLs.  For example,
when used in ocfs2_mknod, this function can cause deadlock as follows.
The parent dir inode lock is taken when calling posix_acl_create ->
get_acl -> ocfs2_iop_get_acl which takes the inode lock again.  This can
cause deadlock if there is a blocked remote lock request waiting for the
lock to be downconverted.  And same deadlock happened in ocfs2_reflink.
This fix is to revert back using ocfs2_init_acl.

Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure")
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ee0fbd5 upstream.

Commit 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
introduced this issue.  ocfs2_setattr called by chmod command holds
cluster wide inode lock when calling posix_acl_chmod.  This latter
function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl.  These
two are also called directly from vfs layer for getfacl/setfacl commands
and therefore acquire the cluster wide inode lock.  If a remote
conversion request comes after the first inode lock in ocfs2_setattr,
OCFS2_LOCK_BLOCKED will be set.  And this will cause the second call to
inode lock from the ocfs2_iop_get_acl() to block indefinetly.

The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which
does not call back into the filesystem.  Therefore, we restore
ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that
instead.

Fixes: 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 626abd59 ]

Currently, when creating or updating a route, no check is performed
in both ipv4 and ipv6 code to the hoplimit value.

The caller can i.e. set hoplimit to 256, and when such route will
 be used, packets will be sent with hoplimit/ttl equal to 0.

This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4
ipv6 route code, substituting any value greater than 255 with 255.

This is consistent with what is currently done for ADVMSS and MTU
in the ipv4 code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 10a81980 ]

In the very unlikely case __tcp_retransmit_skb() can not use the cloning
done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing
the copy and transmit, otherwise TCP TS val will be an exact copy of
original transmit.

Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 161de2ca ]

Reserved fields should be set to zero to avoid exposing
bits from the kernel stack.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 79e48650 ]

Stack object "dte_facilities" is allocated in x25_rx_call_request(),
which is supposed to be initialized in x25_negotiate_facilities.
However, 5 fields (8 bytes in total) are not initialized. This
object is then copied to userland via copy_to_user, thus infoleak
occurs.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4a91cb61 ]

glibc's net/if.h contains copies of definitions from linux/if.h and these
conflict and cause build failures if both files are included by application
source code. Changes in uapi headers, which fixed header file dependencies to
include linux/if.h when it was needed, e.g. commit 1ffad83d, made the
net/if.h and linux/if.h incompatibilities visible as build failures for
userspace applications like iproute2 and xtables-addons.

This patch fixes compile errors when glibc net/if.h is included before
linux/if.h:

./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’
./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’
./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’
./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’
./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’
./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’
./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’
./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’
./linux/if.h:252:8: error: redefinition of ‘struct ifconf’
./linux/if.h:203:8: error: redefinition of ‘struct ifreq’
./linux/if.h:169:8: error: redefinition of ‘struct ifmap’
./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’
./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’
./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’
./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’
./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’
./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’
./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’
./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’

The cases where linux/if.h is included before net/if.h need a similar fix in
the glibc side, or the order of include files can be changed userspace
code as a workaround.

This change was tested in x86 userspace on Debian unstable with
scripts/headers_compile_test.sh:

$ make headers_install && \
  cd usr/include && ../../scripts/headers_compile_test.sh -l -k
...
cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h
PASSED libc before kernel test: ./linux/if.h
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Stephen Hemminger <shemming@brocade.com>
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 856ce5d0 ]

With the newly introduced helper functions the skb pulling is hidden
in the checksumming function - and undone before returning to the
caller.

The IGMP and MLD query parsing functions in the bridge still
assumed that the skb is pointing to the beginning of the IGMP/MLD
message while it is now kept at the beginning of the IPv4/6 header.

If there is a querier somewhere else, then this either causes
the multicast snooping to stay disabled even though it could be
enabled. Or, if we have the querier enabled too, then this can
create unnecessary IGMP / MLD query messages on the link.

Fixing this by taking the offset between IP and IGMP/MLD header into
account, too.

Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code")
Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 31ca0458 ]

get_bridge_ifindices() is used from the old "deviceless" bridge ioctl
calls which aren't called with rtnl held. The comment above says that it is
called with rtnl but that is not really the case.
Here's a sample output from a test ASSERT_RTNL() which I put in
get_bridge_ifindices and executed "brctl show":
[  957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30)
[  957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G        W  O
4.6.0-rc4+ #157
[  957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[  957.423009]  0000000000000000 ffff880058adfdf0 ffffffff8138dec5
0000000000000400
[  957.423009]  ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32
0000000000000001
[  957.423009]  00007ffec1a444b0 0000000000000400 ffff880053c19130
0000000000008940
[  957.423009] Call Trace:
[  957.423009]  [<ffffffff8138dec5>] dump_stack+0x85/0xc0
[  957.423009]  [<ffffffffa05ead32>]
br_ioctl_deviceless_stub+0x212/0x2e0 [bridge]
[  957.423009]  [<ffffffff81515beb>] sock_ioctl+0x22b/0x290
[  957.423009]  [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700
[  957.423009]  [<ffffffff8126c159>] SyS_ioctl+0x79/0x90
[  957.423009]  [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1

Since it only reads bridge ifindices, we can use rcu to safely walk the net
device list. Also remove the wrong rtnl comment above.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>