- 15 Nov, 2023 3 commits
-
-
Andrii Nakryiko authored
Use 32-bit subranges to prune some 64-bit BPF_JEQ/BPF_JNE conditions that otherwise would be "inconclusive" (i.e., is_branch_taken() would return -1). This can happen, for example, when registers are initialized as 64-bit u64/s64, then compared for inequality as 32-bit subregisters, and then followed by 64-bit equality/inequality check. That 32-bit inequality can establish some pattern for lower 32 bits of a register (e.g., s< 0 condition determines whether the bit #31 is zero or not), while overall 64-bit value could be anything (according to a value range representation). This is not a fancy quirky special case, but actually a handling that's necessary to prevent correctness issue with BPF verifier's range tracking: set_range_min_max() assumes that register ranges are non-overlapping, and if that condition is not guaranteed by is_branch_taken() we can end up with invalid ranges, where min > max. [0] https://lore.kernel.org/bpf/CACkBjsY2q1_fUohD7hRmKGqv1MV=eP2f6XK8kjkYNw7BaiF8iQ@mail.gmail.com/Acked-by:
Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by:
Eduard Zingerman <eddyz87@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231112010609.848406-4-andrii@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Generalize is_branch_taken logic for SCALAR_VALUE register to handle cases when both registers are not constants. Previously supported <range> vs <scalar> cases are a natural subset of more generic <range> vs <range> set of cases. Generalized logic relies on straightforward segment intersection checks. Acked-by:
-
Andrii Nakryiko authored
Generalize bounds adjustment logic of reg_set_min_max() to handle not just register vs constant case, but in general any register vs any register cases. For most of the operations it's trivial extension based on range vs range comparison logic, we just need to properly pick min/max of a range to compare against min/max of the other range. For BPF_JSET we keep the original capabilities, just make sure JSET is integrated in the common framework. This is manifested in the internal-only BPF_JSET + BPF_X "opcode" to allow for simpler and more uniform rev_opcode() handling. See the code for details. This allows to reuse the same code exactly both for TRUE and FALSE branches without explicitly handling both conditions with custom code. Note also that now we don't need a special handling of BPF_JEQ/BPF_JNE case none of the registers are constants. This is now just a normal generic case handled by reg_set_min_max(). To make tnum handling cleaner, tnum_with_subreg() helper is added, as that's a common operator when dealing with 32-bit subregister bounds. This keeps the overall logic much less noisy when it comes to tnums. Acked-by:
-
- 14 Nov, 2023 8 commits
-
-
Alexei Starovoitov authored
Yafang Shao says: ==================== bpf: Add support for cgroup1, BPF part This is the BPF part of the series "bpf, cgroup: Add BPF support for cgroup1 hierarchy" with adjustment in the last two patches compared to the previous one. v3->v4: - use subsys_name instead of cgrp_name in get_cgroup_hierarchy_id() (Tejun) - use local bpf_link instead of modifying the skeleton in the selftests v3: https://lwn.net/Articles/949264/ ==================== Link: https://lore.kernel.org/r/20231111090034.4248-1-laoar.shao@gmail.comSigned-off-by: -
Yafang Shao authored
Add selftests for cgroup1 hierarchy. The result as follows, $ tools/testing/selftests/bpf/test_progs --name=cgroup1_hierarchy #36/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK #36/2 cgroup1_hierarchy/test_root_cgid:OK #36/3 cgroup1_hierarchy/test_invalid_level:OK #36/4 cgroup1_hierarchy/test_invalid_cgid:OK #36/5 cgroup1_hierarchy/test_invalid_hid:OK #36/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK #36/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK #36/8 cgroup1_hierarchy/test_sleepable_prog:OK #36 cgroup1_hierarchy:OK Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED Besides, I also did some stress test similar to the patch #2 in this series, as follows (with CONFIG_PROVE_RCU_LIST enabled): - Continuously mounting and unmounting named cgroups in some tasks, for example: cgrp_name=$1 while true do mount -t cgroup -o none,name=$cgrp_name none /$cgrp_name umount /$cgrp_name done - Continuously run this selftest concurrently, while true; do ./test_progs --name=cgroup1_hierarchy; done They can ran successfully without any RCU warnings in dmesg. Signed-off-by:Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20231111090034.4248-7-laoar.shao@gmail.comSigned-off-by:
-
Yafang Shao authored
A new cgroup helper function, get_cgroup1_hierarchy_id(), has been introduced to obtain the ID of a cgroup1 hierarchy based on the provided cgroup name. This cgroup name can be obtained from the /proc/self/cgroup file. Signed-off-by:
-
Yafang Shao authored
Introduce a new helper function to retrieve the cgroup ID from a net_cls cgroup directory. Signed-off-by:
-
Yafang Shao authored
Include the current pid in the classid cgroup path. This way, different testers relying on classid-based configurations will have distinct classid cgroup directories, enabling them to run concurrently. Additionally, we leverage the current pid as the classid, ensuring unique identification. Signed-off-by:
-
Yafang Shao authored
If the net_cls subsystem is already mounted, attempting to mount it again in setup_classid_environment() will result in a failure with the error code EBUSY. Despite this, tmpfs will have been successfully mounted at /sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory will be empty, causing subsequent setup operations to fail. Here's an error log excerpt illustrating the issue when net_cls has already been mounted at /sys/fs/cgroup/net_cls prior to running setup_classid_environment(): - Before that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs (cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs run_test:FAIL:join_classid unexpected error: 1 (errno 2) test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2) (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs #44 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED - After that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 #44 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
-
Yafang Shao authored
A new kfunc is added to acquire cgroup1 of a task: - bpf_task_get_cgroup1 Acquires the associated cgroup of a task whithin a specific cgroup1 hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID. This new kfunc enables the tracing of tasks within a designated container or cgroup directory in BPF programs. Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jordan Rome authored
This is a follow up to: commit b8e3a87a ("bpf: Add crosstask check to __bpf_get_stack"). This test ensures that the task iterator only gets a single user stack (for the current task). Signed-off-by:
Jordan Rome <linux@jordanrome.com> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com
-
- 11 Nov, 2023 1 commit
-
-
Yonghong Song authored
With latest clang18 (main branch of llvm-project repo), when building bpf selftests, [~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j The following compilation error happens: fatal error: error in backend: Branch target out of insn range ... Stack dump: 0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi -I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter /home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include -idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf -c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o 1. <eof> parser at end of file 2. Code generation ... The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay since cpu=v4 supports 32-bit branch target offset. The above failure is due to upstream llvm patch [1] where some inlining behavior are changed in clang18. To workaround the issue, previously all 180 loop iterations are fully unrolled. The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the compiler is clang18, the unrollng amount is unconditionally reduced. [1] https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16eSigned-off-by:Yonghong Song <yonghong.song@linux.dev> Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
-
- 10 Nov, 2023 28 commits
-
-
Jordan Rome authored
Currently get_perf_callchain only supports user stack walking for the current task. Passing the correct *crosstask* param will return 0 frames if the task passed to __bpf_get_stack isn't the current one instead of a single incorrect frame/address. This change passes the correct *crosstask* param but also does a preemptive check in __bpf_get_stack if the task is current and returns -EOPNOTSUPP if it is not. This issue was found using bpf_get_task_stack inside a BPF iterator ("iter/task"), which iterates over all tasks. bpf_get_task_stack works fine for fetching kernel stacks but because get_perf_callchain relies on the caller to know if the requested *task* is the current one (via *crosstask*) it was failing in a confusing way. It might be possible to get user stacks for all tasks utilizing something like access_process_vm but that requires the bpf program calling bpf_get_task_stack to be sleepable and would therefore be a breaking change. Fixes: fa28dcb8 ("bpf: Introduce helper bpf_get_task_stack()") Signed-off-by:Jordan Rome <jordalgo@meta.com> Signed-off-by:
-
Alexei Starovoitov authored
Merge branch 'for-6.8-bpf' of https://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup into bpf-next Merge cgroup prerequisite patches. Link: https://lore.kernel.org/bpf/20231029061438.4215-1-laoar.shao@gmail.com/Signed-off-by:
-
Yafang Shao authored
The kernel supports a minimum GCC version of 5.1.0 for building. However, the "__diag_ignore_all" directive only suppresses the "-Wmissing-prototypes" warning for GCC versions >= 8.0.0. As a result, when building the kernel with older GCC versions, warnings may be triggered. The example below illustrates the warnings reported by the kernel test robot using GCC 7.5.0: compiler: gcc-7 (Ubuntu 7.5.0-6ubuntu2) 7.5.0 All warnings (new ones prefixed by >>): kernel/bpf/helpers.c:1893:19: warning: no previous prototype for 'bpf_obj_new_impl' [-Wmissing-prototypes] __bpf_kfunc void *bpf_obj_new_impl(u64 local_type_id__k, void *meta__ign) ^~~~~~~~~~~~~~~~ kernel/bpf/helpers.c:1907:19: warning: no previous prototype for 'bpf_percpu_obj_new_impl' [-Wmissing-prototypes] __bpf_kfunc void *bpf_percpu_obj_new_impl(u64 local_type_id__k, void *meta__ign) [...] To address this, we should also suppress the "-Wmissing-prototypes" warning for older GCC versions. "#pragma GCC diagnostic push" is supported as of GCC 4.6, and both "-Wmissing-prototypes" and "-Wmissing-declarations" are supported for all the GCC versions that we currently support. Therefore, it is reasonable to suppress these warnings for all supported GCC versions. With this adjustment, it's important to note that after implementing "__diag_ignore_all", it will effectively suppress warnings for all the supported GCC versions. In the future, if you wish to suppress warnings that are only supported on higher GCC versions, it is advisable to explicitly use "__diag_ignore" to specify the GCC version you are targeting. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311031651.A7crZEur-lkp@intel.com/Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Yonghong Song authored
Martin and Vadim reported a verifier failure with bpf_dynptr usage. The issue is mentioned but Vadim workarounded the issue with source change ([1]). The below describes what is the issue and why there is a verification failure. int BPF_PROG(skb_crypto_setup) { struct bpf_dynptr algo, key; ... bpf_dynptr_from_mem(..., ..., 0, &algo); ... } The bpf program is using vmlinux.h, so we have the following definition in vmlinux.h: struct bpf_dynptr { long: 64; long: 64; }; Note that in uapi header bpf.h, we have struct bpf_dynptr { long: 64; long: 64; } __attribute__((aligned(8))); So we lost alignment information for struct bpf_dynptr by using vmlinux.h. Let us take a look at a simple program below: $ cat align.c typedef unsigned long long __u64; struct bpf_dynptr_no_align { __u64 :64; __u64 :64; }; struct bpf_dynptr_yes_align { __u64 :64; __u64 :64; } __attribute__((aligned(8))); void bar(void *, void *); int foo() { struct bpf_dynptr_no_align a; struct bpf_dynptr_yes_align b; bar(&a, &b); return 0; } $ clang --target=bpf -O2 -S -emit-llvm align.c Look at the generated IR file align.ll: ... %a = alloca %struct.bpf_dynptr_no_align, align 1 %b = alloca %struct.bpf_dynptr_yes_align, align 8 ... The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler could allocate variable %a with alignment 1 although in reallity the compiler may choose a different alignment by considering other local variables. In [1], the verification failure happens because variable 'algo' is allocated on the stack with alignment 4 (fp-28). But the verifer wants its alignment to be 8. To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))' to struct bpf_dynptr plus other similar structs. Andrii suggested that we could directly modify uapi struct with named fields like struct 'bpf_iter_num': struct bpf_iter_num { /* opaque iterator state; having __u64 here allows to preserve correct * alignment requirements in vmlinux.h, generated from BTF */ __u64 __opaque[1]; } __attribute__((aligned(8))); Indeed, adding named fields for those affected structs in this patch can preserve alignment when bpf program references them in vmlinux.h. With this patch, the verification failure in [1] can also be resolved. [1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/ [2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/ Cc: Vadim Fedorenko <vadfed@meta.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Suggested-by: -
Alexei Starovoitov authored
Dave Marchevsky says: ==================== Allow bpf_refcount_acquire of mapval obtained via direct LD Consider this BPF program: struct cgv_node { int d; struct bpf_refcount r; struct bpf_rb_node rb; }; struct val_stash { struct cgv_node __kptr *v; }; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(key, int); __type(value, struct val_stash); __uint(max_entries, 10); } array_map SEC(".maps"); long bpf_program(void *ctx) { struct val_stash *mapval; struct cgv_node *p; int idx = 0; mapval = bpf_map_lookup_elem(&array_map, &idx); if (!mapval || !mapval->v) { /* omitted */ } p = bpf_refcount_acquire(mapval->v); /* Verification FAILs here */ /* Add p to some tree */ return 0; } Verification fails on the refcount_acquire: 160: (79) r1 = *(u64 *)(r8 +8) ; R1_w=untrusted_ptr_or_null_cgv_node(id=11,off=0,imm=0) R8_w=map_value(id=10,off=0,ks=8,vs=16,imm=0) refs=6 161: (b7) r2 = 0 ; R2_w=0 refs=6 162: (85) call bpf_refcount_acquire_impl#117824 arg#0 is neither owning or non-owning ref The above verifier dump is actually from sched_ext's scx_flatcg [0], which is the motivating usecase for this series' changes. Specifically, scx_flatcg stashes a rb_node type w/ cgroup-specific info (struct cgv_node) in a map when the cgroup is created, then later puts that cgroup's node in a rbtree in .enqueue . Making struct cgv_node refcounted would simplify the code a bit by virtue of allowing us to remove the kptr_xchg's, but "later puts that cgroups node in a rbtree" is not possible without a refcount_acquire, which suffers from the above verification failure. If we get rid of PTR_UNTRUSTED flag, and add MEM_ALLOC | NON_OWN_REF, mapval->v would be a non-owning ref and verification would succeed. Due to the most recent set of refcount changes [1], which modified bpf_obj_drop behavior to not reuse refcounted graph node's underlying memory until after RCU grace period, this is safe to do. Once mapval->v has the correct flags it _is_ a non-owning reference and verification of the motivating example will succeed. [0]: https://github.com/sched-ext/sched_ext/blob/52911e1040a0f94b9c426dddcc00be5364a7ae9f/tools/sched_ext/scx_flatcg.bpf.c#L275 [1]: https://lore.kernel.org/bpf/20230821193311.3290257-1-davemarchevsky@fb.com/ Summary of patches: * Patch 1 fixes an issue with bpf_refcount_acquire verification letting MAYBE_NULL ptrs through * Patch 2 tests Patch 1's fix * Patch 3 broadens the use of "free only after RCU GP" to all user-allocated types * Patch 4 is a small nonfunctional refactoring * Patch 5 changes verifier to mark direct LD of stashed graph node kptr as non-owning ref * Patch 6 tests Patch 5's verifier changes Changelog: v1 -> v2: https://lore.kernel.org/bpf/20231025214007.2920506-1-davemarchevsky@fb.com/ Series title changed to "Allow bpf_refcount_acquire of mapval obtained via direct LD". V1's title was mistakenly truncated. * Patch 5 ("bpf: Mark direct ld of stashed bpf_{rb,list}_node as non-owning ref") * Direct LD of percpu kptr should not have MEM_ALLOC flag (Yonghong) * Patch 6 ("selftests/bpf: Test bpf_refcount_acquire of node obtained via direct ld") * Test read from stashed value as well ==================== Link: https://lore.kernel.org/r/20231107085639.3016113-1-davemarchevsky@fb.comSigned-off-by: -
Shung-Hsi Yu authored
The addition of is_reg_const() in commit 171de12646d2 ("bpf: generalize is_branch_taken to handle all conditional jumps in one place") has made the register_is_const() redundant. Give the former has more feature, plus the fact the latter is only used in one place, replace register_is_const() with is_reg_const(), and remove the definition of register_is_const. This requires moving the definition of is_reg_const() further up. And since the comment of reg_const_value() reference is_reg_const(), move it up as well. Signed-off-by: -
Dave Marchevsky authored
This patch demonstrates that verifier changes earlier in this series result in bpf_refcount_acquire(mapval->stashed_kptr) passing verification. The added test additionally validates that stashing a kptr in mapval and - in a separate BPF program - refcount_acquiring the kptr without unstashing works as expected at runtime. Signed-off-by:
Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20231107085639.3016113-7-davemarchevsky@fb.comSigned-off-by:
-
Andrii Nakryiko authored
Add ability to filter top B results, both in replay/verifier mode and comparison mode. Just adding `-n10` will emit only first 10 rows, or less, if there is not enough rows. This is not just a shortcut instead of passing veristat output through `head`, though. Filtering out all the other rows influences final table formatting, as table column widths are calculated based on actual emitted test. To demonstrate the difference, compare two "equivalent" forms below, one using head and another using -n argument. TOP N FEATURE ============= [vmuser@archvm bpf]$ sudo ./veristat -C ~/baseline-results-selftests.csv ~/sanity2-results-selftests.csv -e file,prog,insns,states -s '|insns_diff|' -n10 File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ---------------------------------------- --------------------- --------- --------- ------------ ---------- ---------- ------------- test_seg6_loop.bpf.linked3.o __add_egr_x 12440 12360 -80 (-0.64%) 364 357 -7 (-1.92%) async_stack_depth.bpf.linked3.o async_call_root_check 145 145 +0 (+0.00%) 3 3 +0 (+0.00%) async_stack_depth.bpf.linked3.o pseudo_call_check 139 139 +0 (+0.00%) 3 3 +0 (+0.00%) atomic_bounds.bpf.linked3.o sub 7 7 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o kmalloc 5 5 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o sched_process_fork 22 22 +0 (+0.00%) 2 2 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o socket_post_create 23 23 +0 (+0.00%) 2 2 +0 (+0.00%) bind4_prog.bpf.linked3.o bind_v4_prog 358 358 +0 (+0.00%) 33 33 +0 (+0.00%) bind6_prog.bpf.linked3.o bind_v6_prog 429 429 +0 (+0.00%) 37 37 +0 (+0.00%) bind_perm.bpf.linked3.o bind_v4_prog 15 15 +0 (+0.00%) 1 1 +0 (+0.00%) PIPING TO HEAD ============== [vmuser@archvm bpf]$ sudo ./veristat -C ~/baseline-results-selftests.csv ~/sanity2-results-selftests.csv -e file,prog,insns,states -s '|insns_diff|' | head -n12 File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ----------------------------------------------------- ---------------------------------------------------- --------- --------- ------------ ---------- ---------- ------------- test_seg6_loop.bpf.linked3.o __add_egr_x 12440 12360 -80 (-0.64%) 364 357 -7 (-1.92%) async_stack_depth.bpf.linked3.o async_call_root_check 145 145 +0 (+0.00%) 3 3 +0 (+0.00%) async_stack_depth.bpf.linked3.o pseudo_call_check 139 139 +0 (+0.00%) 3 3 +0 (+0.00%) atomic_bounds.bpf.linked3.o sub 7 7 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o kmalloc 5 5 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o sched_process_fork 22 22 +0 (+0.00%) 2 2 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o socket_post_create 23 23 +0 (+0.00%) 2 2 +0 (+0.00%) bind4_prog.bpf.linked3.o bind_v4_prog 358 358 +0 (+0.00%) 33 33 +0 (+0.00%) bind6_prog.bpf.linked3.o bind_v6_prog 429 429 +0 (+0.00%) 37 37 +0 (+0.00%) bind_perm.bpf.linked3.o bind_v4_prog 15 15 +0 (+0.00%) 1 1 +0 (+0.00%) Note all the wasted whitespace in the "PIPING TO HEAD" variant. Signed-off-by:
-
Dave Marchevsky authored
This patch enables the following pattern: /* mapval contains a __kptr pointing to refcounted local kptr */ mapval = bpf_map_lookup_elem(&map, &idx); if (!mapval || !mapval->some_kptr) { /* omitted */ } p = bpf_refcount_acquire(&mapval->some_kptr); Currently this doesn't work because bpf_refcount_acquire expects an owning or non-owning ref. The verifier defines non-owning ref as a type: PTR_TO_BTF_ID | MEM_ALLOC | NON_OWN_REF while mapval->some_kptr is PTR_TO_BTF_ID | PTR_UNTRUSTED. It's possible to do the refcount_acquire by first bpf_kptr_xchg'ing mapval->some_kptr into a temp kptr, refcount_acquiring that, and xchg'ing back into mapval, but this is unwieldy and shouldn't be necessary. This patch modifies btf_ld_kptr_type such that user-allocated types are marked MEM_ALLOC and if those types have a bpf_{rb,list}_node they're marked NON_OWN_REF as well. Additionally, due to changes to bpf_obj_drop_impl earlier in this series, rcu_protected_object now returns true for all user-allocated types, resulting in mapval->some_kptr being marked MEM_RCU. After this patch's changes, mapval->some_kptr is now: PTR_TO_BTF_ID | MEM_ALLOC | NON_OWN_REF | MEM_RCU which results in it passing the non-owning ref test, and the motivating example passing verification. Future work will likely get rid of special non-owning ref lifetime logic in the verifier, at which point we'll be able to delete the NON_OWN_REF flag entirely. Signed-off-by: -
Andrii Nakryiko authored
Add ability to sort results by absolute values of specified stats. This is especially useful to find biggest deviations in comparison mode. When comparing verifier change effect against a large base of BPF object files, it's necessary to see big changes both in positive and negative directions, as both might be a signal for regressions or bugs. The syntax is natural, e.g., adding `-s '|insns_diff|'^` will instruct veristat to sort by absolute value of instructions difference in ascending order. Signed-off-by:
-
Dave Marchevsky authored
This refactoring patch removes the unused BPF_GRAPH_NODE_OR_ROOT btf_field_type and moves BPF_GRAPH_{NODE,ROOT} macros into the btf_field_type enum. Further patches in the series will use BPF_GRAPH_NODE, so let's move this useful definition out of btf.c. Signed-off-by: -
Yonghong Song authored
Martin reported that there is a libbpf complaining of non-zero-value tail padding with LIBBPF_OPTS_RESET macro if struct bpf_netkit_opts is modified to have a 4-byte tail padding. This only happens to clang compiler. The commend line is: ./test_progs -t tc_netkit_multi_links Martin and I did some investigation and found this indeed the case and the following are the investigation details. Clang: clang version 18.0.0 <I tried clang15/16/17 and they all have similar results> tools/lib/bpf/libbpf_common.h: #define LIBBPF_OPTS_RESET(NAME, ...) \ do { \ memset(&NAME, 0, sizeof(NAME)); \ NAME = (typeof(NAME)) { \ .sz = sizeof(NAME), \ __VA_ARGS__ \ }; \ } while (0) #endif tools/lib/bpf/libbpf.h: struct bpf_netkit_opts { /* size of this struct, for forward/backward compatibility */ size_t sz; __u32 flags; __u32 relative_fd; __u32 relative_id; __u64 expected_revision; size_t :0; }; #define bpf_netkit_opts__last_field expected_revision In the above struct bpf_netkit_opts, there is no tail padding. prog_tests/tc_netkit.c: static void serial_test_tc_netkit_multi_links_target(int mode, int target) { ... LIBBPF_OPTS(bpf_netkit_opts, optl); ... LIBBPF_OPTS_RESET(optl, .flags = BPF_F_BEFORE, .relative_fd = bpf_program__fd(skel->progs.tc1), ); ... } Let us make the following source change, note that we have a 4-byte tailing padding now. diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h index 6cd9c501624f..0dd83910ae9a 100644 --- a/tools/lib/bpf/libbpf.h +++ b/tools/lib/bpf/libbpf.h @@ -803,13 +803,13 @@ bpf_program__attach_tcx(const struct bpf_program *prog, int ifindex, struct bpf_netkit_opts { /* size of this struct, for forward/backward compatibility */ size_t sz; - __u32 flags; __u32 relative_fd; __u32 relative_id; __u64 expected_revision; + __u32 flags; size_t :0; }; -#define bpf_netkit_opts__last_field expected_revision +#define bpf_netkit_opts__last_field flags The clang 18 generated asm code looks like below: ; LIBBPF_OPTS_RESET(optl, 55e3: 48 8d 7d 98 leaq -0x68(%rbp), %rdi 55e7: 31 f6 xorl %esi, %esi 55e9: ba 20 00 00 00 movl $0x20, %edx 55ee: e8 00 00 00 00 callq 0x55f3 <serial_test_tc_netkit_multi_links_target+0x18d3> 55f3: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp) 55fe: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax 5605: 48 8b 78 18 movq 0x18(%rax), %rdi 5609: e8 00 00 00 00 callq 0x560e <serial_test_tc_netkit_multi_links_target+0x18ee> 560e: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp) 5614: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp) 561e: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp) 5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) 5633: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax 563a: 48 89 45 98 movq %rax, -0x68(%rbp) 563e: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax 5645: 48 89 45 a0 movq %rax, -0x60(%rbp) 5649: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax 5650: 48 89 45 a8 movq %rax, -0x58(%rbp) 5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565b: 48 89 45 b0 movq %rax, -0x50(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); At -O0 level, the clang compiler creates an intermediate copy. We have below to store 'flags' with 4-byte store and leave another 4 byte in the same 8-byte-aligned storage undefined, 5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) and later we store 8-byte to the original zero'ed buffer 5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565b: 48 89 45 b0 movq %rax, -0x50(%rbp) This caused a problem as the 4-byte value at [%rbp-0x2dc, %rbp-0x2e0) may be garbage. gcc (gcc 11.4) does not have this issue as it does zeroing struct first before doing assignments: ; LIBBPF_OPTS_RESET(optl, 50fd: 48 8d 85 40 fc ff ff leaq -0x3c0(%rbp), %rax 5104: ba 20 00 00 00 movl $0x20, %edx 5109: be 00 00 00 00 movl $0x0, %esi 510e: 48 89 c7 movq %rax, %rdi 5111: e8 00 00 00 00 callq 0x5116 <serial_test_tc_netkit_multi_links_target+0x1522> 5116: 48 8b 45 f0 movq -0x10(%rbp), %rax 511a: 48 8b 40 18 movq 0x18(%rax), %rax 511e: 48 89 c7 movq %rax, %rdi 5121: e8 00 00 00 00 callq 0x5126 <serial_test_tc_netkit_multi_links_target+0x1532> 5126: 48 c7 85 40 fc ff ff 00 00 00 00 movq $0x0, -0x3c0(%rbp) 5131: 48 c7 85 48 fc ff ff 00 00 00 00 movq $0x0, -0x3b8(%rbp) 513c: 48 c7 85 50 fc ff ff 00 00 00 00 movq $0x0, -0x3b0(%rbp) 5147: 48 c7 85 58 fc ff ff 00 00 00 00 movq $0x0, -0x3a8(%rbp) 5152: 48 c7 85 40 fc ff ff 20 00 00 00 movq $0x20, -0x3c0(%rbp) 515d: 89 85 48 fc ff ff movl %eax, -0x3b8(%rbp) 5163: c7 85 58 fc ff ff 08 00 00 00 movl $0x8, -0x3a8(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); It is not clear how to resolve the compiler code generation as the compiler generates correct code w.r.t. how to handle unnamed padding in C standard. So this patch changed LIBBPF_OPTS_RESET macro to avoid uninitialized tail padding. We already knows LIBBPF_OPTS macro works on both gcc and clang, even with tail padding. So LIBBPF_OPTS_RESET is changed to be a LIBBPF_OPTS followed by a memcpy(), thus avoiding uninitialized tail padding. The below is asm code generated with this patch and with clang compiler: ; LIBBPF_OPTS_RESET(optl, 55e3: 48 8d bd 10 fd ff ff leaq -0x2f0(%rbp), %rdi 55ea: 31 f6 xorl %esi, %esi 55ec: ba 20 00 00 00 movl $0x20, %edx 55f1: e8 00 00 00 00 callq 0x55f6 <serial_test_tc_netkit_multi_links_target+0x18d6> 55f6: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp) 5601: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax 5608: 48 8b 78 18 movq 0x18(%rax), %rdi 560c: e8 00 00 00 00 callq 0x5611 <serial_test_tc_netkit_multi_links_target+0x18f1> 5611: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp) 5617: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp) 5621: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp) 562c: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) 5636: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax 563d: 48 89 45 98 movq %rax, -0x68(%rbp) 5641: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax 5648: 48 89 45 a0 movq %rax, -0x60(%rbp) 564c: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax 5653: 48 89 45 a8 movq %rax, -0x58(%rbp) 5657: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565e: 48 89 45 b0 movq %rax, -0x50(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); In the above code, a temporary buffer is zeroed and then has proper value assigned. Finally, values in temporary buffer are copied to the original variable buffer, hence tail padding is guaranteed to be 0. Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20231107201511.2548645-1-yonghong.song@linux.devSigned-off-by:
-
Dave Marchevsky authored
The use of bpf_mem_free_rcu to free refcounted local kptrs was added in commit 7e26cd12 ("bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes"). In the cover letter for the series containing that patch [0] I commented: Perhaps it makes sense to move to mem_free_rcu for _all_ non-owning refs in the future, not just refcounted. This might allow custom non-owning ref lifetime + invalidation logic to be entirely subsumed by MEM_RCU handling. IMO this needs a bit more thought and should be tackled outside of a fix series, so it's not attempted here. It's time to start moving in the "non-owning refs have MEM_RCU lifetime" direction. As mentioned in that comment, using bpf_mem_free_rcu for all local kptrs - not just refcounted - is necessarily the first step towards that goal. This patch does so. After this patch the memory pointed to by all local kptrs will not be reused until RCU grace period elapses. The verifier's understanding of non-owning ref validity and the clobbering logic it uses to enforce that understanding are not changed here, that'll happen gradually in future work, including further patches in the series. [0]: https://lore.kernel.org/all/20230821193311.3290257-1-davemarchevsky@fb.com/Signed-off-by:
-
Dave Marchevsky authored
The test added in this patch exercises the logic fixed in the previous patch in this series. Before the previous patch's changes, bpf_refcount_acquire accepts MAYBE_NULL local kptrs; after the change the verifier correctly rejects the such a call. Signed-off-by:
-
Dave Marchevsky authored
Refcounted local kptrs are kptrs to user-defined types with a bpf_refcount field. Recent commits ([0], [1]) modified the lifetime of refcounted local kptrs such that the underlying memory is not reused until RCU grace period has elapsed. Separately, verification of bpf_refcount_acquire calls currently succeeds for MAYBE_NULL non-owning reference input, which is a problem as bpf_refcount_acquire_impl has no handling for this case. This patch takes advantage of aforementioned lifetime changes to tag bpf_refcount_acquire_impl kfunc KF_RCU, thereby preventing MAYBE_NULL input to the kfunc. The KF_RCU flag applies to all kfunc params; it's fine for it to apply to the void *meta__ign param as that's populated by the verifier and is tagged __ign regardless. [0]: commit 7e26cd12 ("bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes") is the actual change to allocation behaivor [1]: commit 0816b8c6 ("bpf: Consider non-owning refs to refcounted nodes RCU protected") modified verifier understanding of refcounted local kptrs to match [0]'s changes Signed-off-by:
-
Andrii Nakryiko authored
Song Liu says: ==================== This set contains the first 3 patches of set [1]. Currently, [1] is waiting for [3] to be merged to bpf-next tree. So send these 3 patches first to unblock other works, such as [2]. This set is verified with new version of [1] in CI run [4]. Changes since v12 of [1]: 1. Reuse bpf_dynptr_slice() in __bpf_dynptr_data(). (Andrii) 2. Add Acked-by from Vadim Fedorenko. [1] https://lore.kernel.org/bpf/20231104001313.3538201-1-song@kernel.org/ [2] https://lore.kernel.org/bpf/20231031134900.1432945-1-vadfed@meta.com/ [3] https://lore.kernel.org/bpf/20231031215625.2343848-1-davemarchevsky@fb.com/ [4] https://github.com/kernel-patches/bpf/actions/runs/6779945063/job/18427926114 ==================== Signed-off-by:
-
Florian Lehner authored
When looking up an element in LPM trie, the condition 'matchlen == trie->max_prefixlen' will never return true, if key->prefixlen is larger than trie->max_prefixlen. Consequently all elements in the LPM trie will be visited and no element is returned in the end. To resolve this, check key->prefixlen first before walking the LPM trie. Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation") Signed-off-by:
Florian Lehner <dev@der-flo.net> Signed-off-by:
-
Song Liu authored
Similar to ARG_PTR_TO_CONST_STR for BPF helpers, KF_ARG_PTR_TO_CONST_STR specifies kfunc args that point to const strings. Annotation "__str" is used to specify kfunc arg of type KF_ARG_PTR_TO_CONST_STR. Also, add documentation for the "__str" annotation. bpf_get_file_xattr() will be the first kfunc that uses this type. Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/bpf/20231107045725.2278852-4-song@kernel.orgSigned-off-by:
-
Anders Roxell authored
Building an arm64 kernel and seftests/bpf with defconfig + selftests/bpf/config and selftests/bpf/config.aarch64 the fragment CONFIG_DEBUG_INFO_REDUCED is enabled in arm64's defconfig, it should be disabled in file sefltests/bpf/config.aarch64 since if its not disabled CONFIG_DEBUG_INFO_BTF wont be enabled. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Song Liu authored
ARG_PTR_TO_CONST_STR is used to specify constant string args for BPF helpers. The logic that verifies a reg is ARG_PTR_TO_CONST_STR is implemented in check_func_arg(). As we introduce kfuncs with constant string args, it is necessary to do the same check for kfuncs (in check_kfunc_args). Factor out the logic for ARG_PTR_TO_CONST_STR to a new check_reg_const_str() so that it can be reused. check_func_arg() ensures check_reg_const_str() is only called with reg of type PTR_TO_MAP_VALUE. Add a redundent type check in check_reg_const_str() to avoid misuse in the future. Other than this redundent check, there is no change in behavior. Signed-off-by:
-
Artem Savkov authored
bpftool's man page lists "program" as one of possible values for OBJECT, while in fact bpftool accepts "prog" instead. Reported-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20231103081126.170034-1-asavkov@redhat.comSigned-off-by:
-
Song Liu authored
Different types of bpf dynptr have different internal data storage. Specifically, SKB and XDP type of dynptr may have non-continuous data. Therefore, it is not always safe to directly access dynptr->data. Add __bpf_dynptr_data and __bpf_dynptr_data_rw to replace direct access to dynptr->data. Update bpf_verify_pkcs7_signature to use __bpf_dynptr_data instead of dynptr->data. Signed-off-by:
-
Manu Bretelle authored
Those configs are needed to be able to run VM somewhat consistently. For instance, ATM, s390x is missing the `CONFIG_VIRTIO_CONSOLE` which prevents s390x kernels built in CI to leverage qemu-guest-agent. By moving them to `config,vm`, we should have selftest kernels which are equal in term of VM functionalities when they include this file. The set of config unabled were picked using grep -h -E '(_9P|_VIRTIO)' config.x86_64 config | sort | uniq added to `config.vm` and then grep -vE '(_9P|_VIRTIO)' config.{x86_64,aarch64,s390x} as a side-effect, some config may have disappeared to the aarch64 and s390x kernels, but they should not be needed. CI will tell. Signed-off-by:Manu Bretelle <chantr4@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
Hou Tao says: ==================== From: Hou Tao <houtao1@huawei.com> Hi, BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. Patch #1 fixes the size of value passed to per-cpu map update API. The problem was found when fixing the ENOMEM problem, so also post it in this patchset. Patch #2 & #3 mitigates the ENOMEM problem by retrying the update operation for non-preallocated per-cpu map. Please see individual patches for more details. And comments are always welcome. Regards, Tao [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909 ==================== Signed-off-by:
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== BPF register bounds logic and testing improvements This patch set adds a big set of manual and auto-generated test cases validating BPF verifier's register bounds tracking and deduction logic. See details in the last patch. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. To make all this work, BPF verifier's logic needed a bunch of improvements to handle some cases that previously were not covered. This had no implications as to correctness of verifier logic, but it was incomplete enough to cause significant disagreements with alternative implementation of register bounds logic that tests in this patch set implement. So we need BPF verifier logic improvements to make all the tests pass. This is what we do in patches #3 through #9. The end goal of this work, though, is to extend BPF verifier range state tracking such as to allow to derive new range bounds when comparing non-const registers. There is some more investigative work required to investigate and fix existing potential issues with range tracking as part of ALU/ALU64 operations, so <range> x <range> part of v5 patch set ([0]) is dropped until these issues are sorted out. For now, we include preparatory refactorings and clean ups, that set up BPF verifier code base to extend the logic to <range> vs <range> logic in subsequent patch set. Patches #10-#16 perform preliminary refactorings without functionally changing anything. But they do clean up check_cond_jmp_op() logic and generalize a bunch of other pieces in is_branch_taken() logic. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=797178&state=* v5->v6: - dropped <range> vs <range> patches (original patches #18 through #23) to add more register range sanity checks and fix preexisting issues; - comments improvements, addressing other feedback on first 17 patches (Eduard, Alexei); v4->v5: - added entirety of verifier reg bounds tracking changes, now handling <range> vs <range> cases (Alexei); - added way more comments trying to explain why deductions added are correct, hopefully they are useful and clarify things a bit (Daniel, Shung-Hsi); - added two preliminary selftests fixes necessary for RELEASE=1 build to work again, it keeps breaking. v3->v4: - improvements to reg_bounds tester (progress report, split 32-bit and 64-bit ranges, fix various verbosity output issues, etc); v2->v3: - fix a subtle little-endianness assumption inside parge_reg_state() (CI); v1->v2: - fix compilation when building selftests with llvm-16 toolchain (CI). ==================== Link: https://lore.kernel.org/r/20231102033759.2541186-1-andrii@kernel.orgSigned-off-by:
-
Hou Tao authored
BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. So mitigate the problem by retrying the update operation for non-preallocated per-cpu map. [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Andrii Nakryiko authored
Change reg_set_min_max() to take FALSE/TRUE sets of two registers each, instead of assuming that we are always comparing to a constant. For now we still assume that right-hand side registers are constants (and make sure that's the case by swapping src/dst regs, if necessary), but subsequent patches will remove this limitation. reg_set_min_max() is now called unconditionally for any register comparison, so that might include pointer vs pointer. This makes it consistent with is_branch_taken() generality. But we currently only support adjustments based on SCALAR vs SCALAR comparisons, so reg_set_min_max() has to guard itself againts pointers. Taking two by two registers allows to further unify and simplify check_cond_jmp_op() logic. We utilize fake register for BPF_K conditional jump case, just like with is_branch_taken() part. Acked-by:
-
Hou Tao authored
Export map_update_retriable() to make it usable for other map_test cases. These cases may only need retry for specific errno, so add a new callback parameter to let map_update_retriable() decide whether or not the errno is retriable. Signed-off-by:
-
