- 08 Aug, 2024 3 commits
-
-
Zhang Yi authored
We found an input issue after initiation.So we added the default input source at initiation. Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20240807025356.24904-3-zhangyi@everest-semi.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Simon Trimmer authored
Now that regmap_read_bypassed() has been added to the kernel it is preferable to wake the device with a read rather than a write as the utility function can be called at a time before the device has been identified. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/20240807142715.47077-1-simont@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
So we can apply AMD patches that rely on them.
-
- 06 Aug, 2024 2 commits
-
-
Kuninori Morimoto authored
Bespoke trigger support was added when Linux v3.5 by this patch. commit 07bf84aa ("ASoC: dpcm: Add bespoke trigger()") test-component driver is using it, but this is because it indicates used function for debug/trace purpose. Except test-component driver, bespoke trigger has never been used over 10 years in upstream. We can re-support it if needed in the future, but let's remove it for now, because it just noise in upstream. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/87v80ewmdi.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Mark Brown authored
Merge series from Simon Trimmer <simont@opensource.cirrus.com>: This pair of patches extend wm_adsp to add a callback that can be used to control whether ALSA controls are added and then tweak cs35l56 to use it to suppress controls made from firmware coefficients.
-
- 05 Aug, 2024 5 commits
-
-
Richard Fitzgerald authored
Use the late-read buffer in the CS35L56 SoundWire interface to read OTP memory. The OTP memory has a longer access latency than chip registers and cannot guarantee to return the data value in the SoundWire control response if the bus clock is >4.8 MHz. The Cirrus SoundWire peripheral IP exposes the bridge-to-bus read buffer and status bits. For a read from OTP the bridge status bits are polled to wait for the OTP data to be loaded into the read buffer and the data is then read from there. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e1830f66 ("ASoC: cs35l56: Add helper functions for amp calibration") Link: https://patch.msgid.link/20240805140839.26042-1-rf@opensource.cirrus.comSigned-off-by:
-
Johan Hovold authored
Recent changes that started checking the codec version broke audio on the Lenovo ThinkPad X13s: wsa_macro 3240000.codec: Unsupported Codec version (0) wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22 rx_macro 3200000.rxmacro: Unsupported Codec version (0) rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22 Add the missing codec version to the lookup table so that the codec drivers probe successfully. Note that I'm just assuming that this is a 2.0 codec based on the fact that this device uses the older register layout. Fixes: 378918d5 ("ASoC: codecs: lpass-macro: add helpers to get codec version") Fixes: dbacef05 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions") Fixes: 727de4fb ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240729131351.27886-1-johan+linaro@kernel.orgSigned-off-by:
-
Richard Fitzgerald authored
Call efi_rt_services_supported() to check that efi.get_variable exists before calling it. Signed-off-by:
-
Simon Trimmer authored
A number of laptops have gone to market with old firmware versions that export controls that have since been hidden, but we can't just install a newer firmware because the firmware for each product is customized and qualified by the OEM. The issue is that alsactl save and restore has no idea what controls are good to persist which can lead to misconfiguration. There is no reason that the UCM or user should need to interact with any of the ALSA controls for the firmware coefficients so they can be removed entirely. Fixes: e4961125 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Signed-off-by:
-
Simon Trimmer authored
The callback allows codec drivers to affect how firmware coefficients are added as controls. For example a codec driver may selectively add controls by choosing to call wm_adsp_control_add() based on some filter logic. Signed-off-by:
-
- 02 Aug, 2024 19 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Add initial support for the PantherLake platform, and initial ACPI configurations.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: pahole reports a number of sub-optimal structure definitions with holes and cache-line alignment problems, this patchset optimizes a couple of structure frequently used. No functionality change, only re-ordering of structure members.
-
Christophe JAILLET authored
In order to constify `snd_soc_component_driver` struct, duplicate `soc_component_dev_cs43130` into a `soc_component_dev_cs43130_digital` and `soc_component_dev_cs43130_analog`. These 2 new structures share the same .dapm_widgets and .dapm_routes arrays but differ for .num_dapm_widgets and .num_dapm_routes. In the digital case, the last entries are not taken into account. Doing so has several advantages: - `snd_soc_component_driver` can be declared as const to move their declarations to read-only sections. - code in the probe is simpler. There is no need to concatenate some arrays to handle the "analog" case - this saves some memory because all_hp_widgets and analog_hp_routes can be removed. Before : ====== text data bss dec hex filename 53965 8265 4512 66742 104b6 sound/soc/codecs/cs43130.o After : ===== text data bss dec hex filename 54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/1f04bb0366d9640d7ee361dae114ff79e4b381c1.1722274212.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Yue Haibing authored
These symbols are not used outside of the files, make them static to fix sparse warnings: sound/soc/fsl/lpc3xxx-i2s.c:261:30: warning: symbol 'lpc3xxx_i2s_dai_ops' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-i2s.c:271:27: warning: symbol 'lpc3xxx_i2s_dai_driver' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-pcm.c:55:39: warning: symbol 'lpc3xxx_soc_platform_driver' was not declared. Should it be static? Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Link: https://patch.msgid.link/20240802101044.3302251-1-yuehaibing@huawei.comSigned-off-by:
-
Christophe JAILLET authored
In order to constify `snd_soc_component_driver` struct, simplify the logic and the `sti_sas_dev_data` struct. Since commit 165a57a3 ("ASoC: sti-sas: clean legacy in sti-sas") only only chip is supported and `sti_sas_driver` can be fully defined at compilation time. Before: ====== text data bss dec hex filename 8033 1547 16 9596 257c sound/soc/codecs/sti-sas.o After: ===== text data bss dec hex filename 8257 1163 16 9436 24dc sound/soc/codecs/sti-sas.o Signed-off-by:
-
Shenghao Ding authored
ASoC: tas2781: Fix a compiling warning reported by robot kernel test due to adding tas2563_dvc_table Move tas2563_dvc_table into a separate Header file, as only tas2781 codec driver use this table, and hda side codec driver won't use it. Fixes: 75ed63a5 ("ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume") Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20240802072055.1462-1-shenghao-ding@ti.comSigned-off-by:
-
Pierre-Louis Bossart authored
Invert members to remove hole. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20240802124609.188954-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Move waitq to make sure it's entirely in the same cache line, and move ipc_complete to reduce padding. struct snd_sof_ipc_msg { void * msg_data; /* 0 8 */ void * reply_data; /* 8 8 */ size_t msg_size; /* 16 8 */ size_t reply_size; /* 24 8 */ int reply_error; /* 32 4 */ bool ipc_complete; /* 36 1 */ /* XXX 3 bytes hole, try to pack */ wait_queue_head_t waitq; /* 40 88 */ /* --- cacheline 2 boundary (128 bytes) --- */ void * rx_data; /* 128 8 */ /* size: 136, cachelines: 3, members: 8 */ /* sum members: 133, holes: 1, sum holes: 3 */ /* last cacheline: 8 bytes */ }; Signed-off-by: -
Pierre-Louis Bossart authored
Reverse the two members to remove a hole. Signed-off-by:
-
Pierre-Louis Bossart authored
reshuffle members to remove hole. Signed-off-by:
-
Bard Liao authored
This patch adds match table for rt722 multiple function codec on link 0 and link3. The topology does not internally refer to link0 or link3, so we can simplify and use the same topology file name. We do need different tables though. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Bard Liao authored
Add rt711-sdca on sdw link0. Reviewed-by:
-
Pierre-Louis Bossart authored
Clone LNL for now. Reviewed-by:
-
Fred Oh authored
PTL has some differences from MTL/LNL. Need to use different register to power up. Reviewed-by:
Fred Oh <fred.oh@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
For now the tables are basic for mockup devices and headset codec support Reviewed-by:
-
Charles Keepax authored
The microphone/speaker privacy shutter ALSA control handlers need to call pm_runtime_resume, since the hardware needs to be powered up to check the hardware state of the shutter. The IRQ handler for the shutters also needs to notify the ALSA control to inform user-space the shutters updated. However this leads to a mutex inversion, between the sdw_dev_lock and the controls_rwsem. To avoid this mutex inversion cache the kctl pointers before the IRQ handler, which avoids the need to lookup the control and take the controls_rwsem. Suggested-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20240802105734.2309788-5-ckeepax@opensource.cirrus.comSigned-off-by:
-
Charles Keepax authored
No longer any need to hard code the addition of the name prefix, use the new helper function. Signed-off-by:
-
Charles Keepax authored
Add new helper functions snd_soc_component_get_kcontrol() and snd_soc_component_get_kcontrol_locked() that returns a kcontrol by name, but will factor in the components name_prefix, to handle situations where multiple components are present with the same controls. Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
- 01 Aug, 2024 11 commits
-
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Many drivers are selecting strings "playback" / "capture" by own handling, but we have snd_pcm_direction_name() function for it. This patch use it. One note is that snd_pcm_direction_name() will select "Playback" and "Capture", instead of "playback" / "capture". Almost all drivers are using it as dev_dbg() or dev_err() so no problem. But some other drivers are using it as other purpose. It might be issue (?). For example ASoC debugfs dir name will be changed by this patch.
-
Mark Brown authored
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>: This patch series majorly consists of below changes. - Rename structures, macros and codec helper names used in Intel SoundWire generic driver to make it generic. - Move Intel SoundWire driver common structures, macros and codec helper functions to common placeholder so that it can be used by other platform machine driver. - Refactor few SoundWire common codec helper functions. - AMD SOF based generic SoundWire machine driver for ACP 6.3 variant. This work started a couple of months ago to avoid duplication of code that wasn't really Intel-specific in the "sof_sdw" machine driver. The code went through multiple iterations, was tested for multiple weeks and a couple of build issues reported by the Intel kbuild bots were corrected. This is the initial version of SoundWire machine driver for AMD platforms. Additional code refactoring will be done in the next step on the AMD side. Link: https://github.com/thesofproject/linux/pull/5068Reviewed-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Kuninori Morimoto authored
We already have snd_pcm_direction_name(). Let's use it. Signed-off-by:
-
Rob Herring (Arm) authored
Use of_property_read_bool() to read boolean properties rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240731191312.1710417-20-robh@kernel.orgSigned-off-by:
-
Rob Herring (Arm) authored
Use of_property_present() to test for property presence rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
-
