- 26 Aug, 2015 24 commits
-
-
Catherine Sullivan authored
Bump version and update the copyright year for i40evf. Change-ID: Iddb81b9dba09f0dc57ab54937b5821ecdd721ff6 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Neerav Parikh authored
Store the CEE TLV status returned by firmware to allow drivers to dump that for debug purposes. Change-ID: Ie3c4cf8cebabee4f15e1e3fdc4fc8a68bbca40ee Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Anjali Singhai Jain authored
Add virtual channel offload capability to support RX polling mode in the VF. Change-ID: Ib643ae2a7506dfc75fc489fc207493fabefa4832 Signed-off-by:
Jingjing Wu <jingjing.wu@intel.com> Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Greg Rose authored
The kernel notifies all VXLAN capable registered drivers, i.e. any driver that implements ndo_add_vxlan_port(), of the addition of a port so that the driver can track which ports are in use. There's no need to log this - it just fills the system log with useless and irksome noise. Also, when failing to init SR-IOV interfaces the driver was printing the same message twice. Just remove the inner printk and let the outer message catch enable as well as the other failures. Change-ID: Id5ecb1d425c2a357ee2bc1635dab24553831dade Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Anjali Singhai Jain authored
There were quite a few issues when the wrong defines were getting used in the VF driver. This patch fixes the code where PF driver registers were getting used for VF driver, and also removes the registers that are not being used from the VF register file. Change-ID: If116a9730112950d006eb8ec763998fc914cc839 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Anjali Singhai Jain authored
Use CTLN1 instead of CTLN for the VF relative register space. Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318 Signed-off-by:
-
Mitch Williams authored
Turns out that 'inavlid' is an inavlid spelling for 'invalid'. Change-ID: Ie1fe2d0f8d1ba75ab880594875ec2e4152a76f61 Signed-off-by:
-
Greg Rose authored
The existing comment is incorrect. Add new comment to point out that the PF reset does not affect link but if the reset is changed to a different type that does affect link then the link test would need to be moved to before the reset. Change-ID: I28d786f46e9465860babdee61c1dba51016464df Reported-by:
Jeremiah Kyle <jeremiah.kyle@intel.com> Signed-off-by:
-
Neerav Parikh authored
This patch adds capability to update per VEB per TC statistics and dump it via ethtool. It also adds a structure to hold VEB per TC statistics. The fields can be filled by reading the GLVEBTC_* counters. Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538 Signed-off-by:
-
Greg Rose authored
Treat netqueues the same way we do virtual functions when someone wants to run the ethtool offline diagnostic test. Change-ID: Id48d2b933f1fd0db7be06305a93c6ebe3dc821f5 Signed-off-by:
-
Anjali Singhai Jain authored
This patch fixes the driver flow to take into account legacy interrupts. Over time we added code that assumes MSIX is the only mode that the driver runs in. It also enables a legacy workaround to trigger SWINT when the TX ring has non-cache aligned descriptors pending and interrupts are disabled. We work with a single vector in MSI mode too, so apply the same restrictions as Legacy. Change-ID: I826ddff1f9bd45d2dbe11f56a3ddcef0dbf42563 Signed-off-by:
-
Catherine Sullivan authored
We should be stopping the service task and flow director on shutdown not on suspension. Signed-off-by:
-
Shannon Nelson authored
The port.crc_errors is really an RX counter, so let's mark it as such. Change-ID: I179afd3f8a95d45229bb4163a6aeb01f0d2d250b Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Sparse cries when we compare an __le16 to a u16, almost like it cares about architectures other than x86. Weird. Use the le16_to_cpu macro to make it stop crying. Change-ID: Id068f4d7868a2d3df234a791a76d15938f37db35 Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== act_bpf: remove spinlock in fast path v1 version had a race condition in cleanup path of bpf_prog. I tried to fix it by adding new callback 'cleanup_rcu' to 'struct tcf_common' and call it out of act_api cleanup path, but Daniel noticed (thanks for the idea!) that most of the classifiers already do action cleanup out of rcu callback. So instead this set of patches converts tcindex and rsvp classifiers to call tcf_exts_destroy() after rcu grace period and since action cleanup logic in __tcf_hash_release() is only called when bind and refcnt goes to zero, it's guaranteed that cleanup() callback is called from rcu callback. More specifically: patches 1 and 2 - simple fixes patches 2 and 3 - convert tcf_exts_destroy in tcindex and rsvp to call_rcu patch 5 - removes spin_lock from act_bpf The cleanup of actions is now universally done after rcu grace period and in the future we can drop (now unnecessary) call_rcu from tcf_hash_destroy() patch 5 is using synchronize_rcu() in act_bpf replacement path, since it's very rare and alternative of dynamically allocating 'struct tcf_bpf_cfg' just to pass it to call_rcu looks even less appealing. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
Similar to act_gact/act_mirred, act_bpf can be lockless in packet processing with extra care taken to free bpf programs after rcu grace period. Replacement of existing act_bpf (very rare) is done with synchronize_rcu() and final destruction is done from tc_action_ops->cleanup() callback that is called from tcf_exts_destroy()->tcf_action_destroy()->__tcf_hash_release() when bind and refcnt reach zero which is only possible when classifier is destroyed. Previous two patches fixed the last two classifiers (tcindex and rsvp) to call tcf_exts_destroy() from rcu callback. Similar to gact/mirred there is a race between prog->filter and prog->tcf_action. Meaning that the program being replaced may use previous default action if it happened to return TC_ACT_UNSPEC. act_mirred race betwen tcf_action and tcfm_dev is similar. In all cases the race is harmless. Long term we may want to improve the situation by replacing the whole tc_action->priv as single pointer instead of updating inner fields one by one. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexei Starovoitov authored
Adjust destroy path of cls_rsvp to call tcf_exts_destroy() after rcu grace period. Signed-off-by:
-
Alexei Starovoitov authored
Adjust destroy path of cls_tcindex to call tcf_exts_destroy() after rcu grace period. Signed-off-by:
-
Alexei Starovoitov authored
Fix harmless typo and avoid unnecessary copy of empty 'prog' into unused 'strcut tcf_bpf_cfg old'. Fixes: f4eaed28 ("act_bpf: fix memory leaks when replacing bpf programs") Signed-off-by:
-
Alexei Starovoitov authored
tcf_hash_destroy() used once. Make it static. Signed-off-by:
-
Valentin Rothberg authored
The Kconfig option AVERAGE and its implementation has been removed by commit f4e774f5 ("average: remove out-of-line implementation"). Remove the dead build rule in lib/Makefile. Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== Documentation: dsa This patch series adds some documentation about DSA as a subsystem as well as the SF2 driver since it slightly diverges from your average DSA driver ;) ==================== Signed-off-by: -
Florian Fainelli authored
Add a document describing the Broadcom Starfigther 2 switch hardware, its specifics, and how the driver is implemented and its specifics. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Florian Fainelli authored
Describe how the DSA subsystem works, its design principles, limitations, and describe in details how to implement a DSA switch driver. Acked-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Scott Feldman <sfeldma@gmail.com> Reviewed-by:
-
- 25 Aug, 2015 16 commits
-
-
David S. Miller authored
Santosh Shilimkar says: ==================== RDS: Few more fixes As indicated in the earlier series [1], this is a follow-up series which addresses few issues around the RDS FMR code. With [1] and the subject series, now I can run many parallel threads with multiple sockets with N x N traffic. The stress tests has survived overnight runs. [1] https://lkml.org/lkml/2015/8/22/127 ==================== Signed-off-by:
-
santosh.shilimkar@oracle.com authored
Memory allocated for 'ibmr' uses kzalloc_node() which already initialises the memory to zero. There is no need to do memset() 0 on that memory. Signed-off-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
santosh.shilimkar@oracle.com authored
FMR flush is an expensive and time consuming operation. Reduce the frequency of FMR pool flush by 50% so that more FMR work gets accumulated for more efficient flushing. Signed-off-by:
-
santosh.shilimkar@oracle.com authored
RDS FMR flush operation and also it races with connect/reconect which happes a lot with RDS. FMR flush being on common rds_wq aggrevates the problem. Lets push RDS FMR pool flush work to its own worker. Signed-off-by:
-
Wengang Wang authored
In rds_ib_flush_mr_pool(), dirty_count accounts the clean ones which is wrong. This can lead to a negative dirty count value. Lets fix it. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by:
-
santosh.shilimkar@oracle.com authored
rds_rdma_unuse() drops the mr reference count which it hasn't taken. Correct way of removing mr is to remove mr from the tree and then rdma_destroy_mr() it first, then rds_mr_put() to decrement its reference count. Whichever thread holds last reference will free the mr via rds_mr_put() This bug was triggering weird null pointer crashes. One if the trace for it is captured below. BUG: unable to handle kernel NULL pointer dereference at 0000000000000104 IP: [<ffffffffa0899471>] rds_ib_free_mr+0x31/0x130 [rds_rdma] PGD 4366fa067 PUD 4366f9067 PMD 0 Oops: 0000 [#1] SMP [...] task: ffff88046da6a000 ti: ffff88046da6c000 task.ti: ffff88046da6c000 RIP: 0010:[<ffffffffa0899471>] [<ffffffffa0899471>] rds_ib_free_mr+0x31/0x130 [rds_rdma] RSP: 0018:ffff88046fa43bd8 EFLAGS: 00010286 RAX: 0000000071d38b80 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880079e7ff40 RBP: ffff88046fa43bf8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88046fa43ca8 R11: ffff88046a802ed8 R12: ffff880079e7fa40 R13: 0000000000000000 R14: ffff880079e7ff40 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88046fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000104 CR3: 00000004366fb000 CR4: 00000000000006e0 Stack: ffff880079e7fa40 ffff880671d38f08 ffff880079e7ff40 0000000000000296 ffff88046fa43c28 ffffffffa087a38b ffff880079e7fa40 ffff880671d38f10 0000000000000000 0000000000000292 ffff88046fa43c48 ffffffffa087a3b6 Call Trace: <IRQ> [<ffffffffa087a38b>] rds_destroy_mr+0x8b/0xa0 [rds] [<ffffffffa087a3b6>] __rds_put_mr_final+0x16/0x30 [rds] [<ffffffffa087a492>] rds_rdma_unuse+0xc2/0x120 [rds] [<ffffffffa08766d3>] rds_recv_incoming_exthdrs+0x83/0xa0 [rds] [<ffffffffa0876782>] rds_recv_incoming+0x92/0x200 [rds] [<ffffffffa0895269>] rds_ib_process_recv+0x259/0x320 [rds_rdma] [<ffffffffa08962a8>] rds_ib_recv_tasklet_fn+0x1a8/0x490 [rds_rdma] [<ffffffff810dcd78>] ? __remove_hrtimer+0x58/0x90 [<ffffffff810799e1>] tasklet_action+0xb1/0xc0 [<ffffffff81079b52>] __do_softirq+0xe2/0x290 [<ffffffff81079df6>] irq_exit+0xa6/0xb0 [<ffffffff81613915>] do_IRQ+0x65/0xf0 [<ffffffff816118ab>] common_interrupt+0x6b/0x6b Signed-off-by:
-
santosh.shilimkar@oracle.com authored
On rds_ib_frag_slab allocation failure, ensure rds_ib_incoming_slab is not pointing to the detsroyed memory. Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - code restyling and beautification - use int kernel types instead of C99 - update kereldoc - prevent potential hlist double deletion of VLAN objects - fix gw bandwidth calculation - convert list to hlist when needed - add lockdep_asserts calls in function with lock requirements described in kerneldoc ==================== Signed-off-by: -
Govindarajulu Varadarajan authored
posted_index is RO in firmware. We need not do ioread everytime to get posted index. Store posted index locally. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
Corinna Vinschen authored
The r8169 driver collects statistical information returned by @get_stats64 by counting them in the driver itself, even though many (but not all) of the values are already collected by tally counters (TCs) in the NIC. Some of these TC values are not returned by @get_stats64. Especially the received multicast packages are missing from /proc/net/dev. Rectify this by fetching the TCs and returning them from rtl8169_get_stats64. The counters collected in the driver obviously disappear as soon as the driver is unloaded so after a driver is loaded the counters always start at 0. The TCs on the other hand are only reset by a power cycle. Without further considerations the values collected by the driver would not match up against the TC values. This patch introduces a new function rtl8169_reset_counters which resets the TCs. Also, since rtl8169_reset_counters shares most of its code with rtl8169_update_counters, refactor the shared code into two new functions rtl8169_map_counters and rtl8169_unmap_counters. Unfortunately chip versions prior to RTL_GIGA_MAC_VER_19 don't allow to reset the TCs programatically. Therefore introduce an addition to the rtl8169_private struct and a function rtl8169_init_counter_offsets to store the TCs at first rtl_open. Use these values as offsets in rtl8169_get_stats64. Propagate a failure to reset *and* update the counters up to rtl_open and emit a warning message, if so. Signed-off-by:
Corinna Vinschen <vinschen@redhat.com> Signed-off-by:
-
David S. Miller authored
>> net/rds/ib_recv.c:382:28: sparse: incorrect type in initializer (different base types) net/rds/ib_recv.c:382:28: expected int [signed] can_wait net/rds/ib_recv.c:382:28: got restricted gfp_t net/rds/ib_recv.c:828:23: sparse: cast to restricted __le64 Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Shrikrishna Khare authored
Shreyas Bhatewara would no longer maintain the vmxnet3 driver. Taking over the role of vmxnet3 maintainer. Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Signed off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Jiri Benc authored
The vxlan_get_sk_family inline function was added after the last #endif, making multiple inclusion of net/vxlan.h fail. Move it to the proper place. Reported-by:
Mark Rustad <mark.d.rustad@intel.com> Fixes: 705cc62f ("vxlan: provide access function for vxlan socket address family") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David Ahern authored
Add entry for new VRF device driver. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
WANG Cong authored
This patch fixes the following crash: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc7+ #166 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88010656d280 ti: ffff880106570000 task.ti: ffff880106570000 RIP: 0010:[<ffffffff8182f91b>] [<ffffffff8182f91b>] dst_destroy+0xa6/0xef RSP: 0018:ffff880107603e38 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8800d225a000 RCX: ffffffff82250fd0 RDX: 0000000000000001 RSI: ffffffff82250fd0 RDI: 6b6b6b6b6b6b6b6b RBP: ffff880107603e58 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000000b530 R11: ffff880107609000 R12: 0000000000000000 R13: ffffffff82343c40 R14: 0000000000000000 R15: ffffffff8182fb4f FS: 0000000000000000(0000) GS:ffff880107600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fcabd9d3000 CR3: 00000000d7279000 CR4: 00000000000006e0 Stack: ffffffff82250fd0 ffff8801077d6f00 ffffffff82253c40 ffff8800d225a000 ffff880107603e68 ffffffff8182fb5d ffff880107603f08 ffffffff810d795e ffffffff810d7648 ffff880106574000 ffff88010656d280 ffff88010656d280 Call Trace: <IRQ> [<ffffffff8182fb5d>] dst_destroy_rcu+0xe/0x1d [<ffffffff810d795e>] rcu_process_callbacks+0x618/0x7eb [<ffffffff810d7648>] ? rcu_process_callbacks+0x302/0x7eb [<ffffffff8182fb4f>] ? dst_gc_task+0x1eb/0x1eb [<ffffffff8107e11b>] __do_softirq+0x178/0x39f [<ffffffff8107e52e>] irq_exit+0x41/0x95 [<ffffffff81a4f215>] smp_apic_timer_interrupt+0x34/0x40 [<ffffffff81a4d5cd>] apic_timer_interrupt+0x6d/0x80 <EOI> [<ffffffff8100b968>] ? default_idle+0x21/0x32 [<ffffffff8100b966>] ? default_idle+0x1f/0x32 [<ffffffff8100bf19>] arch_cpu_idle+0xf/0x11 [<ffffffff810b0bc7>] default_idle_call+0x1f/0x21 [<ffffffff810b0dce>] cpu_startup_entry+0x1ad/0x273 [<ffffffff8102fe67>] start_secondary+0x135/0x156 dst is freed right before lwtstate_put(), this is not correct... Fixes: 61adedf3 ("route: move lwtunnel state to dst_entry") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Masanari Iida authored
This patch fix following warnings. .//net/core/skbuff.c:407: warning: No description found for parameter 'len' .//net/core/skbuff.c:407: warning: Excess function parameter 'length' description in '__netdev_alloc_skb' .//net/core/skbuff.c:476: warning: No description found for parameter 'len' .//net/core/skbuff.c:476: warning: Excess function parameter 'length' description in '__napi_alloc_skb' Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
