- 18 Apr, 2014 31 commits
-
-
Peter Boström authored
[ Upstream commit dd38743b ] With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by:
Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Eric Dumazet authored
[ Upstream commit 2d8d40af ] Resizing fq hash table allocates memory while holding qdisc spinlock, with BH disabled. This is definitely not good, as allocation might sleep. We can drop the lock and get it when needed, we hold RTNL so no other changes can happen at the same time. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
-
Michael Chan authored
[ Upstream commit a8d9bc2e ] The pci shutdown handler added in: bnx2: Add pci shutdown handler commit 25bfb1dd created a shutdown down sequence without chip reset if the device was never brought up. This can cause the firmware to shutdown the PHY prematurely and cause MMIO read cycles to be unresponsive. On some systems, it may generate NMI in the bnx2's pci shutdown handler. The fix is to tell the firmware not to shutdown the PHY if there was no prior chip reset. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit c88507fb ] DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Anton Nayshtut authored
[ Upstream commit d2d273ff ] Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds). This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS header. The issue detected and the fix verified by running MS HCK Offload LSO test on top of QEMU Windows guests, as this test sends IPv6 packets with IPPROTO_DSTOPTS. Signed-off-by:
Anton Nayshtut <anton@swortex.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit de144391 ] Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit e588e2f2 ] Quoting Alexander Aring: While fragmentation and unloading of 6lowpan module I got this kernel Oops after few seconds: BUG: unable to handle kernel paging request at f88bbc30 [..] Modules linked in: ipv6 [last unloaded: 6lowpan] Call Trace: [<c012af4c>] ? call_timer_fn+0x54/0xb3 [<c012aef8>] ? process_timeout+0xa/0xa [<c012b66b>] run_timer_softirq+0x140/0x15f Problem is that incomplete frags are still around after unload; when their frag expire timer fires, we get crash. When a netns is removed (also done when unloading module), inet_frag calls the evictor with 'force' argument to purge remaining frags. The evictor loop terminates when accounted memory ('work') drops to 0 or the lru-list becomes empty. However, the mem accounting is done via percpu counters and may not be accurate, i.e. loop may terminate prematurely. Alter evictor to only stop once the lru list is empty when force is requested. Reported-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Reported-by:
Alexander Aring <alex.aring@gmail.com> Tested-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Erik Hugne authored
[ Upstream commit 2892505e ] Failure to schedule a TIPC tasklet with tipc_k_signal because the tasklet handler is disabled is not an error. It means TIPC is currently in the process of shutting down. We remove the error logging in this case. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Erik Hugne authored
[ Upstream commit 1bb8dce5 ] When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by:
-
Erik Hugne authored
[ Upstream commit edcc0511 ] When a topology server subscriber is disconnected, the associated connection id is set to zero. A check vs zero is then done in the subscription timeout function to see if the subscriber have been shut down. This is unnecessary, because all subscription timers will be cancelled when a subscriber terminates. Setting the connection id to zero is actually harmful because id zero is the identity of the topology server listening socket, and can cause a race that leads to this socket being closed instead. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
Ying Xue authored
[ Upstream commit 4652edb7 ] When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a connection instance, its reference count value is increased if it's found. But subsequently if it's found that the connection is closed, the work of sending message is not queued into its server send workqueue, and the connection reference count is not decreased. This will cause a reference count leak. To reproduce this problem, an application would need to open and closes topology server connections with high intensity. We fix this by immediately decrementing the connection reference count if a send fails due to the connection being closed. Signed-off-by:
-
Ying Xue authored
[ Upstream commit 6d4ebeb4 ] Currently connection shutdown callback function is called when connection instance is released in tipc_conn_kref_release(), and receiving packets and sending packets are running in different threads. Even if connection is closed by the thread of receiving packets, its shutdown callback may not be called immediately as the connection reference count is non-zero at that moment. So, although the connection is shut down by the thread of receiving packets, the thread of sending packets doesn't know it. Before its shutdown callback is invoked to tell the sending thread its connection has been closed, the sending thread may deliver messages by tipc_conn_sendmsg(), this is why the following error information appears: "Sending subscription event failed, no memory" To eliminate it, allow connection shutdown callback function to be called before connection id is removed in tipc_close_conn(), which makes the sending thread know the truth in time that its socket is closed so that it doesn't send message to it. We also remove the "Sending XXX failed..." error reporting for topology and config services. Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 6565b9ee ] MLD queries are supposed to have an IPv6 link-local source address according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch adds a sanity check to ignore such broken MLD queries. Without this check, such malformed MLD queries can result in a denial of service: The queries are ignored by any MLD listener therefore they will not respond with an MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Reviewed-by:
-
Daniel Borkmann authored
[ Upstream commit c485658b ] While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable"), we noticed that there's a skb memory leakage in the error path. Running the same reproducer as in ec0223ec and by unconditionally jumping to the error label (to simulate an error condition) in sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about the unfreed chunk->auth_chunk skb clone: Unreferenced object 0xffff8800b8f3a000 (size 256): comm "softirq", pid 0, jiffies 4294769856 (age 110.757s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X......... backtrace: [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210 [<ffffffff81566929>] skb_clone+0x49/0xb0 [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp] [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp] [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp] [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210 [<ffffffff815a64af>] nf_reinject+0xbf/0x180 [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue] [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink] [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0 [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink] [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250 [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0 [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0 [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380 What happens is that commit bbd0d598 clones the skb containing the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case that an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- When we enter sctp_sf_do_5_1D_ce() and before we actually get to the point where we process (and subsequently free) a non-NULL chunk->auth_chunk, we could hit the "goto nomem_init" path from an error condition and thus leave the cloned skb around w/o freeing it. The fix is to centrally free such clones in sctp_chunk_destroy() handler that is invoked from sctp_chunk_free() after all refs have dropped; and also move both kfree_skb(chunk->auth_chunk) there, so that chunk->auth_chunk is either NULL (since sctp_chunkify() allocs new chunks through kmem_cache_zalloc()) or non-NULL with a valid skb pointer. chunk->skb and chunk->auth_chunk are the only skbs in the sctp_chunk structure that need to be handeled. While at it, we should use consume_skb() for both. It is the same as dev_kfree_skb() but more appropriately named as we are not a device but a protocol. Also, this effectively replaces the kfree_skb() from both invocations into consume_skb(). Functions are the same only that kfree_skb() assumes that the frame was being dropped after a failure (e.g. for tools like drop monitor), usage of consume_skb() seems more appropriate in function sctp_chunk_destroy() though. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 24b9bf43 ] I stumbled upon this very serious bug while hunting for another one, it's a very subtle race condition between inet_frag_evictor, inet_frag_intern and the IPv4/6 frag_queue and expire functions (basically the users of inet_frag_kill/inet_frag_put). What happens is that after a fragment has been added to the hash chain but before it's been added to the lru_list (inet_frag_lru_add) in inet_frag_intern, it may get deleted (either by an expired timer if the system load is high or the timer sufficiently low, or by the fraq_queue function for different reasons) before it's added to the lru_list, then after it gets added it's a matter of time for the evictor to get to a piece of memory which has been freed leading to a number of different bugs depending on what's left there. I've been able to trigger this on both IPv4 and IPv6 (which is normal as the frag code is the same), but it's been much more difficult to trigger on IPv4 due to the protocol differences about how fragments are treated. The setup I used to reproduce this is: 2 machines with 4 x 10G bonded in a RR bond, so the same flow can be seen on multiple cards at the same time. Then I used multiple instances of ping/ping6 to generate fragmented packets and flood the machines with them while running other processes to load the attacked machine. *It is very important to have the _same flow_ coming in on multiple CPUs concurrently. Usually the attacked machine would die in less than 30 minutes, if configured properly to have many evictor calls and timeouts it could happen in 10 minutes or so. An important point to make is that any caller (frag_queue or timer) of inet_frag_kill will remove both the timer refcount and the original/guarding refcount thus removing everything that's keeping the frag from being freed at the next inet_frag_put. All of this could happen before the frag was ever added to the LRU list, then it gets added and the evictor uses a freed fragment. An example for IPv6 would be if a fragment is being added and is at the stage of being inserted in the hash after the hash lock is released, but before inet_frag_lru_add executes (or is able to obtain the lru lock) another overlapping fragment for the same flow arrives at a different CPU which finds it in the hash, but since it's overlapping it drops it invoking inet_frag_kill and thus removing all guarding refcounts, and afterwards freeing it by invoking inet_frag_put which removes the last refcount added previously by inet_frag_find, then inet_frag_lru_add gets executed by inet_frag_intern and we have a freed fragment in the lru_list. The fix is simple, just move the lru_add under the hash chain locked region so when a removing function is called it'll have to wait for the fragment to be added to the lru_list, and then it'll remove it (it works because the hash chain removal is done before the lru_list one and there's no window between the two list adds when the frag can get dropped). With this fix applied I couldn't kill the same machine in 24 hours with the same setup. Fixes: 3ef0eb0d ("net: frag, move LRU list maintenance outside of rwlock") CC: Florian Westphal <fw@strlen.de> CC: Jesper Dangaard Brouer <brouer@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Gerd Hoffmann authored
commit 121a6a17 upstream. Explicitly set 1024x768 as default mode, so the display doesn't come up with the largest supported mode. While being at it drop first three drm_add_modes_noedid calls. As drm_add_modes_noedid fills the mode list with modes from the database *up to* the specified size it is pretty pointless to call it multiple times with different sizes. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Gerd Hoffmann authored
commit 3cf70daf upstream. New helper function to set the preferred video mode. Can be called after drm_add_modes_noedid if you don't want the largest supported video mode be used by default. Signed-off-by:
-
Adam Jackson authored
commit 13ba0ad4 upstream. Calling this "conflicting" just makes people think there's a problem when there's not. Signed-off-by:
Adam Jackson <ajax@redhat.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Chris Wilson authored
commit 46eeb2c1 upstream. If we fail to remove a conflicting fb driver, we need to abort the loading of the second driver to avoid likely kernel panics. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Gu Zheng authored
commit 3a41c5db upstream. Following commits: 50e244cc fb: rework locking to fix lock ordering on takeover e93a9a86 fb: Yet another band-aid for fixing lockdep mess 054430e7 fbcon: fix locking harder reworked locking to fix related lock ordering on takeover, and introduced console_lock into fbmem, but it seems that the new lock sequence(fb_info->lock ---> console_lock) is against with the one in console_callback(console_lock ---> fb_info->lock), and leads to a potential dead lock as following: [ 601.079000] ====================================================== [ 601.079000] [ INFO: possible circular locking dependency detected ] [ 601.079000] 3.11.0 #189 Not tainted [ 601.079000] ------------------------------------------------------- [ 601.079000] kworker/0:3/619 is trying to acquire lock: [ 601.079000] (&fb_info->lock){+.+.+.}, at: [<ffffffff81397566>] lock_fb_info+0x26/0x60 [ 601.079000] but task is already holding lock: [ 601.079000] (console_lock){+.+.+.}, at: [<ffffffff8141aae3>] console_callback+0x13/0x160 [ 601.079000] which lock already depends on the new lock. [ 601.079000] the existing dependency chain (in reverse order) is: [ 601.079000] -> #1 (console_lock){+.+.+.}: [ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140 [ 601.079000] [<ffffffff810c6267>] console_lock+0x77/0x80 [ 601.079000] [<ffffffff81399448>] register_framebuffer+0x1d8/0x320 [ 601.079000] [<ffffffff81cfb4c8>] efifb_probe+0x408/0x48f [ 601.079000] [<ffffffff8144a963>] platform_drv_probe+0x43/0x80 [ 601.079000] [<ffffffff8144853b>] driver_probe_device+0x8b/0x390 [ 601.079000] [<ffffffff814488eb>] __driver_attach+0xab/0xb0 [ 601.079000] [<ffffffff814463bd>] bus_for_each_dev+0x5d/0xa0 [ 601.079000] [<ffffffff81447e6e>] driver_attach+0x1e/0x20 [ 601.079000] [<ffffffff81447a07>] bus_add_driver+0x117/0x290 [ 601.079000] [<ffffffff81448fea>] driver_register+0x7a/0x170 [ 601.079000] [<ffffffff8144a10a>] __platform_driver_register+0x4a/0x50 [ 601.079000] [<ffffffff8144a12d>] platform_driver_probe+0x1d/0xb0 [ 601.079000] [<ffffffff81cfb0a1>] efifb_init+0x273/0x292 [ 601.079000] [<ffffffff81002132>] do_one_initcall+0x102/0x1c0 [ 601.079000] [<ffffffff81cb80a6>] kernel_init_freeable+0x15d/0x1ef [ 601.079000] [<ffffffff8166d2de>] kernel_init+0xe/0xf0 [ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0 [ 601.079000] -> #0 (&fb_info->lock){+.+.+.}: [ 601.079000] [<ffffffff810dc1d8>] __lock_acquire+0x1e18/0x1f10 [ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140 [ 601.079000] [<ffffffff816835ca>] mutex_lock_nested+0x7a/0x3b0 [ 601.079000] [<ffffffff81397566>] lock_fb_info+0x26/0x60 [ 601.079000] [<ffffffff813a4aeb>] fbcon_blank+0x29b/0x2e0 [ 601.079000] [<ffffffff81418658>] do_blank_screen+0x1d8/0x280 [ 601.079000] [<ffffffff8141ab34>] console_callback+0x64/0x160 [ 601.079000] [<ffffffff8108d855>] process_one_work+0x1f5/0x540 [ 601.079000] [<ffffffff8108e04c>] worker_thread+0x11c/0x370 [ 601.079000] [<ffffffff81095fbd>] kthread+0xed/0x100 [ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0 [ 601.079000] other info that might help us debug this: [ 601.079000] Possible unsafe locking scenario: [ 601.079000] CPU0 CPU1 [ 601.079000] ---- ---- [ 601.079000] lock(console_lock); [ 601.079000] lock(&fb_info->lock); [ 601.079000] lock(console_lock); [ 601.079000] lock(&fb_info->lock); [ 601.079000] *** DEADLOCK *** so we reorder the lock sequence the same as it in console_callback() to avoid this issue. And following Tomi's suggestion, fix these similar issues all in fb subsystem. Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Takashi Iwai authored
commit c683f427 upstream. Currently drm_pick_cmdline_mode() doesn't care about the interlace when the given mode line has no "i" suffix. That is, when there are multiple entries for the same resolution, an interlace mode might be picked up just depending on the assigned order, and there is no way to exclude it. This patch changes the logic for the mode selection, to prefer the noninterlace mode unless the interlace mode is explicitly given. When no matching mode is found, it still tries the interlace mode as fallback. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 3803c8e5 upstream. Now that we disable audio while setting up the audio hw, we should be able to set this up without hangs. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 832eafaf upstream. Disable audio around audio hw setup. This may avoid hangs on certain asics. Signed-off-by:
-
Martin Koegler authored
commit 99d4a8ae upstream. Xorg fbdev driver requires smem_start/smem_len, otherwise it tries to map 0 bytes as video memory. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=856760Signed-off-by:
Martin Koegler <martin.koegler@chello.at> Signed-off-by:
-
Chris Wilson authored
commit a4945f95 upstream. The PIPEA quirk is specifically for the issue with the PIPEB PLL on 830gm being slaved to the PIPEA PLL, and so to use PIPEB requires PIPEA running. i845 doesn't even have the second PLL or pipe, and enabling the quirk results in a blank DVO LVDS. Signed-off-by:
-
Jiri Kosina authored
commit 7b7b68bb upstream. In case reading of block 0 during open() fails, it is not the right thing to let open() succeed. Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in case the bio callback encounters an error while trying to read block 0. As a bonus, this works around certain broken userspace (blkid), which is not able to properly handle read()s returning IO errors. Hence be nice to those, and bail out during open() already; if block 0 is not readable, read()s are not going to provide any meaningful data anyway. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 10542c22 upstream. When doing filesystem wide sync, there's no need to force transaction commit (or synchronously write inode buffer) separately for each inode because ext4_sync_fs() takes care of forcing commit at the end (VFS takes care of flushing buffer cache, respectively). Most of the time this slowness doesn't manifest because previous WB_SYNC_NONE writeback doesn't leave much to write but when there are processes aggressively creating new files and several filesystems to sync, the sync slowness can be noticeable. In the following test script sync(1) takes around 6 minutes when there are two ext4 filesystems mounted on a standard SATA drive. After this patch sync takes a couple of seconds so we have about two orders of magnitude improvement. function run_writers { for (( i = 0; i < 10; i++ )); do mkdir $1/dir$i for (( j = 0; j < 40000; j++ )); do dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null done & done } for dir in "$@"; do run_writers $dir done sleep 40 time sync Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Trond Myklebust authored
commit 62835679 upstream. The call to xprt_free_allocation() will call list_del() on req->rq_bc_pa_list, which is not attached to a list. This patch moves the list_del() out of xprt_free_allocation() and into those callers that need it. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 8f493b9c upstream. nfs3_proc_setacls is used internally by the NFSv3 create operations to set the acl after the file has been created. If the operation fails because the server doesn't support acls, then it must return '0', not -EOPNOTSUPP. Reported-by:
Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/20140201010328.GI15937@n2100.arm.linux.org.uk Cc: Christoph Hellwig <hch@lst.de> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Malahal Naineni authored
commit a1800aca upstream. Avoid returning incorrect acl mask attributes when the server doesn't support ACLs. Signed-off-by:
Malahal Naineni <malahal@us.ibm.com> Signed-off-by:
-
Jiri Slaby authored
commit a94cdd1f upstream. In read_all_bytes, we do unsigned char i; ... bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; ... for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time. Signed-off-by:
Rui Hui Dian <rhdian@novell.com> Cc: Tomas Cech <tcech@suse.cz> Cc: Corey Minyard <minyard@acm.org> Cc: <openipmi-developer@lists.sourceforge.net> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 13 Apr, 2014 7 commits
-
-
Finn Thain authored
commit e571c58f upstream. Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a fatal exception on 68030 (and presumably 68020 also). Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranetSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Heiko Carstens authored
commit 03b8c7b6 upstream. If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there is no runtime check necessary, allow to skip the test within futex_init(). This allows to get rid of some code which would always give the same result, and also allows the compiler to optimize a couple of if statements away. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20140302120947.GA3641@osirisSigned-off-by:
-
Paul Moore authored
commit f64410ec upstream. This patch is based on an earlier patch by Eric Paris, he describes the problem below: "If an inode is accessed before policy load it will get placed on a list of inodes to be initialized after policy load. After policy load we call inode_doinit() which calls inode_doinit_with_dentry() on all inodes accessed before policy load. In the case of inodes in procfs that means we'll end up at the bottom where it does: /* Default to the fs superblock SID. */ isec->sid = sbsec->sid; if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) { if (opt_dentry) { isec->sclass = inode_mode_to_security_class(...) rc = selinux_proc_get_sid(opt_dentry, isec->sclass, &sid); if (rc) goto out_unlock; isec->sid = sid; } } Since opt_dentry is null, we'll never call selinux_proc_get_sid() and will leave the inode labeled with the label on the superblock. I believe a fix would be to mimic the behavior of xattrs. Look for an alias of the inode. If it can't be found, just leave the inode uninitialized (and pick it up later) if it can be found, we should be able to call selinux_proc_get_sid() ..." On a system exhibiting this problem, you will notice a lot of files in /proc with the generic "proc_t" type (at least the ones that were accessed early in the boot), for example: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax However, with this patch in place we see the expected result: # ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }' system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Acked-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Sebastian Hesselbarth authored
commit b42285f6 upstream. The clock passed to PCI controller found on MVEBU SoCs may come from a clock gate. This requires the clock to be enabled before any registers are accessed. Therefore, move the clock enable before register iomap to ensure it is enabled. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Mikulas Patocka authored
commit 22c73795 upstream. This patch reorders reported frequencies from the highest to the lowest, just like in other frequency drivers. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mikulas Patocka authored
commit d82b922a upstream. The powernow-k6 driver used to read the initial multiplier from the powernow register. However, there is a problem with this: * If there was a frequency transition before, the multiplier read from the register corresponds to the current multiplier. * If there was no frequency transition since reset, the field in the register always reads as zero, regardless of the current multiplier that is set using switches on the mainboard and that the CPU is running at. The zero value corresponds to multiplier 4.5, so as a consequence, the powernow-k6 driver always assumes multiplier 4.5. For example, if we have 550MHz CPU with bus frequency 100MHz and multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5 and bus frequency is 122MHz. The powernow-k6 driver then sets the multiplier to 4.5, underclocking the CPU to 450MHz, but reports the current frequency as 550MHz. There is no reliable way how to read the initial multiplier. I modified the driver so that it contains a table of known frequencies (based on parameters of existing CPUs and some common overclocking schemes) and sets the multiplier according to the frequency. If the frequency is unknown (because of unusual overclocking or underclocking), the user must supply the bus speed and maximum multiplier as module parameters. This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by:
-
Mikulas Patocka authored
commit e20e1d0a upstream. I found out that a system with k6-3+ processor is unstable during network server load. The system locks up or the network card stops receiving. The reason for the instability is the CPU frequency scaling. During frequency transition the processor is in "EPM Stop Grant" state. The documentation says that the processor doesn't respond to inquiry requests in this state. Consequently, coherency of processor caches and bus master devices is not maintained, causing the system instability. This patch flushes the cache during frequency transition. It fixes the instability. Other minor changes: * u64 invalue changed to unsigned long because the variable is 32-bit * move the logic to set the multiplier to a separate function powernow_k6_set_cpu_multiplier * preserve lower 5 bits of the powernow port instead of 4 (the voltage field has 5 bits) * mask interrupts when reading the multiplier, so that the port is not open during other activity (running other kernel code with the port open shouldn't cause any misbehavior, but we should better be safe and keep the port closed) This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by:
-
- 03 Apr, 2014 2 commits
-
-
Jiri Slaby authored
-
Daniel Borkmann authored
commit b22f5126 upstream. Some occurences in the netfilter tree use skb_header_pointer() in the following way ... struct dccp_hdr _dh, *dh; ... skb_header_pointer(skb, dataoff, sizeof(_dh), &dh); ... where dh itself is a pointer that is being passed as the copy buffer. Instead, we need to use &_dh as the forth argument so that we're copying the data into an actual buffer that sits on the stack. Currently, we probably could overwrite memory on the stack (e.g. with a possibly mal-formed DCCP packet), but unintentionally, as we only want the buffer to be placed into _dh variable. Fixes: 2bc78049 ("[NETFILTER]: nf_conntrack: add DCCP protocol support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
