- 25 May, 2010 40 commits
-
-
Henrik Kretzschmar authored
This fixes a two section mismatches and makes remove() __devexit. Signed-off-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
We should be releasing "res->start" here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Cc: Wang Qiang <rurality.linux@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Albert Herranz authored
Fix a problem observed while using fb_defio with a short delay on a PowerPC platform. It is possible that page_mkclean() is invoked in the deferred io work function _before_ a PTE has been marked dirty. In this case, the page is removed from the defio pagelist but page_mkclean() does not write-protect the page again. The end result is that defio ignores all subsequent writes to the page and the corresponding portions of the framebuffer never get updated. The fix consists in keeping track of the pages with non-dirty PTEs, re-checking them again on the next deferred io work iteration. Note that those pages are not passed to the defio callback as they are not written by userspace yet. Signed-off-by:
Albert Herranz <albert_herranz@yahoo.es> Acked-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by:
-
Henrik Kretzschmar authored
Since the drivers probe call was changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") the fb_fix_screeninfo and fb_var_screeninfo structures must be changed from .init.data to .devinit.data, too. Also the drivers remove routine should be moved from .text to .devexit.text It removes these 7 section mismatch warnings from modpost: WARNING: vmlinux.o(.devinit.text+0x1e28): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_fix The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_fix. If sgivwfb_fix is only used by sgivwfb_probe then annotate sgivwfb_fix with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e50): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e59): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e60): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_fix The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_fix. If sgivwfb_fix is only used by sgivwfb_probe then annotate sgivwfb_fix with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e6a): Section mismatch in reference from the function sgivwfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit sgivwfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by sgivwfb_probe then annotate (unknown) with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e7f): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_var1600sw The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_var1600sw. If sgivwfb_var1600sw is only used by sgivwfb_probe then annotate sgivwfb_var1600sw with a matching annotation. WARNING: vmlinux.o(.devinit.text+0x1e91): Section mismatch in reference from the function sgivwfb_probe() to the variable .init.data:sgivwfb_var The function __devinit sgivwfb_probe() references a variable __initdata sgivwfb_var. If sgivwfb_var is only used by sgivwfb_probe then annotate sgivwfb_var with a matching annotation. Signed-off-by:
-
Henrik Kretzschmar authored
Since the drivers probe calls were changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") all the function from .init.text should be moved to .devinit.text, too. The drivers remove calls can also be move from .text to .devexit.text. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by:
-
Henrik Kretzschmar authored
Since the drivers probe call was changed from .init.text to .devinit.text in commit c2e13037 ("platform-drivers: move probe to .devinit.text in drivers/video") the fb_fix_screeninfo and fb_var_screeninfo structures must be changed from .init.data to .devinit.data, too. Also the drivers remove routine should be moved from .exit.text to .devexit.text Signed-off-by:
-
Grazvydas Ignotas authored
FBIO_WAITFORVSYNC is currently implemented by matroxfb, atyfb, intelfb and more. All of them keep redefining the same FBIO_WAITFORVSYNC macro over and over again, so move it to linux/fb.h and clean up those duplicate defines. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Maik Broemme <mbroemme@plusserver.de> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Hiremath, Vaibhav" <hvaibhav@ti.com> Signed-off-by:
-
Martin Ambrose authored
This work includes the following: - Implement handler for FBIO_WAITFORVSYNC ioctl. - Allocate the data and palette buffers separately. A consequence of this is that the palette and data loading is now done in different phases. And that the LCD must be disabled temporarily after the palette is loaded but this will only happen once after init and each time the palette is changed. I think this is OK. - Allocate two (ping and pong) framebuffers from memory. - Add pan_display handler which toggles the LCDC DMA registers between the ping and pong buffers. Signed-off-by:
Martin Ambrose <martin@ti.com> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Henrik Kretzschmar authored
Fix up the section in the w100fb driver, by moving: * w100fb_remove() from .text to .devexit.text * w100_get_xtal_table() from .text to .devinit.text * w100fb_init() from .devinit.text to .init.text Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@kernel.org> [if "platform-drivers: move probe to .devinit.text in drivers/video" was merged] Signed-off-by:
-
Henrik Kretzschmar authored
Fix up the sections in the vga16fb driver, by moving: * the variables vga16_defined and vga16fb from .init.data to .devinit.data * vga16fb_setup() from .text to .init.text * vga16fb_remove() from .text. to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/built-in.o(.devinit.text+0x1a420): Section mismatch in re ference from the function vga16fb_probe() to the (unknown reference) .init.data: (unknown) The function __devinit vga16fb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by vga16fb_probe then annotate (unknown) with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x1a437): Section mismatch in reference from the function vga16fb_probe() to the variable .init.data:vga16fb_defined The function __devinit vga16fb_probe() references a variable __initdata vga16fb_defined. If vga16fb_defined is only used by vga16fb_probe then annotate vga16fb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x1a457): Section mismatch in reference from the function vga16fb_probe() to the variable .init.data:vga16fb_fix The function __devinit vga16fb_probe() references a variable __initdata vga16fb_fix. If vga16fb_fix is only used by vga16fb_probe then annotate vga16fb_fix with a matching annotation. Signed-off-by:
-
Henrik Kretzschmar authored
Fix up the section in the vfb driver, by moving the variables vfb_default and vfb_fix from .init.data to .devinit.data This fixes the following warnings issued by modpost: WARNING: drivers/video/vfb.o(.devinit.text+0xf8): Section mismatch in reference from the function vfb_probe() to the variable .init.data:vfb_default The function __devinit vfb_probe() references a variable __initdata vfb_default. If vfb_default is only used by vfb_probe then annotate vfb_default with a matching annotation. WARNING: drivers/video/vfb.o(.devinit.text+0x114): Section mismatch in reference from the function vfb_probe() to the variable .init.data:vfb_fix The function __devinit vfb_probe() references a variable __initdata vfb_fix. If vfb_fix is only used by vfb_probe then annotate vfb_fix with a matching annotation. Signed-off-by:
-
Henrik Kretzschmar authored
Fix up the sections in the hgafb driver, by * moving hga_default_var and hga_fix from .init.data to .devinit.data * moving hga_detect() from .init.text to .devinit.text * moving hga_fb_remove() from .text to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/hgafb.o(.devinit.text+0x18): Section mismatch in referenc e from the function hgafb_probe() to the function .init.text:hga_card_detect() The function __devinit hgafb_probe() references a function __init hga_card_detect(). If hga_card_detect is only used by hgafb_probe then annotate hga_card_detect with a matching annotation. WARNING: drivers/video/hgafb.o(.devinit.text+0xfe): Section mismatch in referenc e from the function hgafb_probe() to the variable .init.data:hga_fix The function __devinit hgafb_probe() references a variable __initdata hga_fix. If hga_fix is only used by hgafb_probe then annotate hga_fix with a matching annotation. WARNING: drivers/video/hgafb.o(.devinit.text+0x105): Section mismatch in reference from the function hgafb_probe() to the variable .init.data:hga_default_var The function __devinit hgafb_probe() references a variable __initdata hga_default_var. If hga_default_var is only used by hgafb_probe then annotate hga_default_var with a matching annotation. Signed-off-by:
-
Henrik Kretzschmar authored
Fix the sections in the arcfb driver, by moving: * the variables arcfb_fix and arcfb_var from .init.data to .devinit.data * arcfb_remove() from .text to .devexit.text This fixes the following warnings issued by modpost: WARNING: drivers/video/built-in.o(.devinit.text+0x543): Section mismatch in reference from the function arcfb_probe() to the variable .init.data:arcfb_var The function __devinit arcfb_probe() references a variable __initdata arcfb_var. If arcfb_var is only used by arcfb_probe then annotate arcfb_var with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x558): Section mismatch in reference from the function arcfb_probe() to the variable .init.data:arcfb_fix The function __devinit arcfb_probe() references a variable __initdata arcfb_fix. If arcfb_fix is only used by arcfb_probe then annotate arcfb_fix with a matching annotation. Signed-off-by:
-
Dan Carpenter authored
These are different size buffers (40 chars vs 16), we may as well be cautious. Signed-off-by:
-
Michael Hennerich authored
This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Mark Brown authored
Now that the WM831x core uses genirq for the IRQ controller there is no need to use the WM831x-specific wrappers to request interrupts so convert to use genirq directly. Also use more meaningful strings to make /proc/interrupts more readily legible. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Dan Carpenter authored
The bug is an oops when dev_get_drvdata() returned null in cmos_update_irq_enable(). The call tree looks like this: rtc_dev_ioctl() => rtc_update_irq_enable() => cmos_update_irq_enable() It's caused by a race condition in the module initialization. It is rtc_device_register() which makes the ioctl operations live so I moved the call to dev_set_drvdata() before the call to rtc_device_register(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15963Reported-by:Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Marc Zyngier authored
The current ds1302 driver (or at least the one that lives in /drivers/rtc) seems to be designed for memory mapped devices only. This make it quite hard to add support for GPIO-based implementations (as this is the case for the upcoming Arcom Vulcan). This patch moves the direct register access to inline functions with explicit names. Still not as good as a proper platform driver, but at least neater. Signed-off-by:
Marc Zyngier <maz@misterjones.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
H Hartley Sweeten authored
Instead of individually creating and removing the sysfs device attribute files, wrap them in an attribute_group and use sysfs_{create/remove}_group. Signed-off-by:H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by:
-
Vladimir Zapolskiy authored
On imx SoCs rtc clock parent is CKIL, but clock rate shall be determined using rtc clock itself, that eliminates CKIL clock usage in the driver. Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by:
-
Maurus Cuelenaere authored
Add support for the S3C64xx SoC to the generic S3C RTC driver. Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> Acked-by:
Ben Dooks <ben-linux@fluff.org> Cc: Frans Pop <elendil@planet.nl> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in fs/smbfs/symlink.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled: drivers/xen/manage.c:223: error: implicit declaration of function 'handle_sysrq' Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Carsten Emde authored
The MSR IA32_TEMPERATURE_TARGET contains the TjMax value in the newer Intel processors. Signed-off-by:
Huaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by:
Carsten Emde <C.Emde@osadl.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by:
-
Carsten Emde authored
The thermal sensors of Intel(R) CPUs can be detected by CPUID instruction, indicated by CPUID.06H.EAX[0]. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by:
-
Paul Thomas authored
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Paul Thomas <pthomas8589@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Samu Onkalo authored
Set valid adjustment window (0 - 2000ms). Signed-off-by:
Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by:
Eric Piel <eric.piel@tremplin-utc.net> Cc: Daniel Mack <daniel@caiaq.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Samu Onkalo authored
Content for the 8bit device threaded interrupt handlers. Depending on the interrupt line and chip configuration, either click or wakeup / freefall handler is called. In case of click, BTN_ event is sent via input device. In case of wakeup or freefall, input device ABS_ events are updated immediatelly. It is still possible to configure interrupt line 1 for fast freefall detection and use the second line either for click or threshold based interrupts. Or both lines can be used for click / threshold interrupts. Polled input device can be set to stopped state and still get coordinate updates via input device using interrupt based method. Polled mode and interrupt mode can also be used parallel. BTN_ events are remapped based on existing axis remapping information. Signed-off-by:
-
Samu Onkalo authored
Original lis3 driver didn't provide interrupt handler(s) for click or threshold event handling. This patch adds threaded handlers for one or two interrupt lines for 8 bit device. Actual content for interrupt handling is provided in the separate patch. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
-
Samu Onkalo authored
8 bit device has two wakeup / free fall units. It was not possible to configure the second unit. This patch introduces configuration entry to the platform data and also corresponding changes to the 8 bit setup function. High pass filters were enabled by default. Patch introduces configuration option for high pass filter cut off frequency and also possibility to disable or enable the filter via platform data. Since the control is a new one and default state was filter enabled, new option is used to disable the filter. This way old platform data is still compatible with the change. Signed-off-by:
-
Samu Onkalo authored
Separate configuration function for 8 bit version of the chip. This way generic part of the init function stays little bit more readable. Signed-off-by:
-
Samu Onkalo authored
Definitions for click were missing. Signed-off-by:
-
Joakim Tjernlund authored
Since crc32.c contains a nifty test program that can be executed in user space, make sure endian detection works reliably in user space too. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
-
Joakim Tjernlund authored
Precompute more crc32 values(0xcc00, 0xcc0000 and 0xcc000000) into tables. This increases the table size from 1KB to 4KB but the performance benfit makes it worth it: 28% faster on MPC8321, 266 MHz 2x faster on Core 2 Duo, 3.1GHz [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Jean Delvare <khali@linux-fr.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andi Kleen authored
I've seen various new Kconfigs with rather unhelpful one liner descriptions. Add a Kconfig warning for a minimum length of the Kconfig help section. Right now I arbitarily chose 4. The exact value can be debated. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andy Shevchenko authored
Remove own implementation of hex_to_bin(). Signed-off-by:
Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
Instead of using own implementation involve hex_to_bin() function. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Andy Shevchenko authored
Remove own implementation of hex_to_bin(). Signed-off-by:
-
Andy Shevchenko authored
Instead of using own implementation involve hex_to_bin() function. Signed-off-by:
-
