- 09 Jun, 2014 1 commit
-
-
Tom Haynes authored
The save of the write offset was removed some time ago, so that part of the comment is bogus. The remainder is pretty self-evident. So off with it! Signed-off-by:
Tom Haynes <Thomas.Haynes@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
- 05 Jun, 2014 1 commit
-
-
Trond Myklebust authored
The addition of lockdep code to write_seqcount_begin/end has lead to a bunch of false positive claims of ABBA deadlocks with the so_lock spinlock. Audits show that this simply cannot happen because the read side code does not spin while holding so_lock. Cc: <stable@vger.kernel.org> # 3.13.x Signed-off-by:
-
- 04 Jun, 2014 25 commits
-
-
git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust authored
Pull NFS client side changes for RDMA from Anna Schumaker These patches are mostly cleanups and bugfixes for using RDMA as an over-the-wire transport. Highlights include: - Remove obsolete memory registration modes. - Removing BUG_ON()s to keep client's running. - Fix deadlocks, NULL-pointer dereferences, and memory leaks. * tag 'nfs-rdma-3.16' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (24 commits) xprtrdma: Disconnect on registration failure xprtrdma: Remove BUG_ON() call sites xprtrdma: Avoid deadlock when credit window is reset SUNRPC: Move congestion window constants to header file xprtrdma: Reset connection timeout after successful reconnect xprtrdma: Use macros for reconnection timeout constants xprtrdma: Allocate missing pagelist xprtrdma: Remove Tavor MTU setting xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting xprtrdma: Reduce the number of hardway buffer allocations xprtrdma: Limit work done by completion handler xprtrmda: Reduce calls to ib_poll_cq() in completion handlers xprtrmda: Reduce lock contention in completion handlers xprtrdma: Split the completion queue xprtrdma: Make rpcrdma_ep_destroy() return void xprtrdma: Simplify rpcrdma_deregister_external() synopsis xprtrdma: mount reports "Invalid mount option" if memreg mode not supported xprtrdma: Fall back to MTHCAFMR when FRMR is not supported xprtrdma: Remove REGISTER memory registration mode xprtrdma: Remove MEMWINDOWS registration modes ...
-
Chuck Lever authored
If rpcrdma_register_external() fails during request marshaling, the current RPC request is killed. Instead, this RPC should be retried after reconnecting the transport instance. The most likely reason for registration failure with FRMR is a failed post_send, which would be due to a remote transport disconnect or memory exhaustion. These issues can be recovered by a retry. Problems encountered in the marshaling logic itself will not be corrected by trying again, so these should still kill a request. Now that we've added a clean exit for marshaling errors, take the opportunity to defang some BUG_ON's. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
If an error occurs in the marshaling logic, fail the RPC request being processed, but leave the client running. Signed-off-by:
-
Chuck Lever authored
Update the cwnd while processing the server's reply. Otherwise the next task on the xprt_sending queue is still subject to the old credit window. Currently, no task is awoken if the old congestion window is still exceeded, even if the new window is larger, and a deadlock results. This is an issue during a transport reconnect. Servers don't normally shrink the credit window, but the client does reset it to 1 when reconnecting so the server can safely grow it again. As a minor optimization, remove the hack of grabbing the initial cwnd size (which happens to be RPC_CWNDSCALE) and using that value as the congestion scaling factor. The scaling value is invariant, and we are better off without the multiplication operation. Signed-off-by:
-
Chuck Lever authored
I would like to use one of the RPC client's congestion algorithm constants in transport-specific code. Signed-off-by:
-
Chuck Lever authored
If the new connection is able to make forward progress, reset the re-establish timeout. Otherwise it keeps growing even if disconnect events are rare. The same behavior as TCP is adopted: reconnect immediately if the transport instance has been able to make some forward progress. Signed-off-by:
-
Chuck Lever authored
Clean up: Ensure the same max and min constant values are used everywhere when setting reconnect timeouts. Signed-off-by:
-
Shirley Ma authored
GETACL relies on transport layer to alloc memory for reply buffer. However xprtrdma assumes that the reply buffer (pagelist) has been pre-allocated in upper layer. This problem was reported by IOL OFA lab test on PPC. Signed-off-by:
Shirley Ma <shirley.ma@oracle.com> Reviewed-by:
Edward Mossman <emossman@iol.unh.edu> Signed-off-by:
-
Chuck Lever authored
Clean up. Remove HCA-specific clutter in xprtrdma, which is supposed to be device-independent. Hal Rosenstock <hal@dev.mellanox.co.il> observes: > Note that there is OpenSM option (enable_quirks) to return 1K MTU > in SA PathRecord responses for Tavor so that can be used for this. > The default setting for enable_quirks is FALSE so that would need > changing. Signed-off-by:
-
Chuck Lever authored
Devesh Sharma <Devesh.Sharma@Emulex.Com> reports that after a disconnect, his HCA is failing to create a fresh QP, leaving ia_ri->ri_id->qp set to NULL. But xprtrdma still allows RPCs to wake up and post LOCAL_INV as they exit, causing an oops. rpcrdma_ep_connect() is allowing the wake-up by leaking the QP creation error code (-EPERM in this case) to the RPC client's generic layer. xprt_connect_status() does not recognize -EPERM, so it kills pending RPC tasks immediately rather than retrying the connect. Re-arrange the QP creation logic so that when it fails on reconnect, it leaves ->qp with the old QP rather than NULL. If pending RPC tasks wake and exit, LOCAL_INV work requests will flush rather than oops. On initial connect, leaving ->qp == NULL is OK, since there are no pending RPCs that might use ->qp. But be sure not to try to destroy a NULL QP when rpcrdma_ep_connect() is retried. Signed-off-by:
-
Chuck Lever authored
While marshaling an RPC/RDMA request, the inline_{rsize,wsize} settings determine whether an inline request is used, or whether read or write chunks lists are built. The current default value of these settings is 1024. Any RPC request smaller than 1024 bytes is sent to the NFS server completely inline. rpcrdma_buffer_create() allocates and pre-registers a set of RPC buffers for each transport instance, also based on the inline rsize and wsize settings. RPC/RDMA requests and replies are built in these buffers. However, if an RPC/RDMA request is expected to be larger than 1024, a buffer has to be allocated and registered for that RPC, and deregistered and released when the RPC is complete. This is known has a "hardway allocation." Since the introduction of NFSv4, the size of RPC requests has become larger, and hardway allocations are thus more frequent. Hardway allocations are significant overhead, and they waste the existing RPC buffers pre-allocated by rpcrdma_buffer_create(). We'd like fewer hardway allocations. Increasing the size of the pre-registered buffers is the most direct way to do this. However, a blanket increase of the inline thresholds has interoperability consequences. On my 64-bit system, rpcrdma_buffer_create() requests roughly 7000 bytes for each RPC request buffer, using kmalloc(). Due to internal fragmentation, this wastes nearly 1200 bytes because kmalloc() already returns an 8192-byte piece of memory for a 7000-byte allocation request, though the extra space remains unused. So let's round up the size of the pre-allocated buffers, and make use of the unused space in the kmalloc'd memory. This change reduces the amount of hardway allocated memory for an NFSv4 general connectathon run from 1322092 to 9472 bytes (99%). Signed-off-by:Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Chuck Lever authored
Sagi Grimberg <sagig@dev.mellanox.co.il> points out that a steady stream of CQ events could starve other work because of the boundless loop pooling in rpcrdma_{send,recv}_poll(). Instead of a (potentially infinite) while loop, return after collecting a budgeted number of completions. Signed-off-by:Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by:
-
Chuck Lever authored
Change the completion handlers to grab up to 16 items per ib_poll_cq() call. No extra ib_poll_cq() is needed if fewer than 16 items are returned. Signed-off-by:
-
Chuck Lever authored
Skip the ib_poll_cq() after re-arming, if the provider knows there are no additional items waiting. (Have a look at commit ed23a727 for more details). Signed-off-by:
-
Chuck Lever authored
The current CQ handler uses the ib_wc.opcode field to distinguish between event types. However, the contents of that field are not reliable if the completion status is not IB_WC_SUCCESS. When an error completion occurs on a send event, the CQ handler schedules a tasklet with something that is not a struct rpcrdma_rep. This is never correct behavior, and sometimes it results in a panic. To resolve this issue, split the completion queue into a send CQ and a receive CQ. The send CQ handler now handles only struct rpcrdma_mw wr_id's, and the receive CQ handler now handles only struct rpcrdma_rep wr_id's. Fix suggested by Shirley Ma <shirley.ma@oracle.com> Reported-by:
Rafael Reiter <rafael.reiter@ims.co.at> Fixes: 5c635e09 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=73211Signed-off-by:
Klemens Senn <klemens.senn@ims.co.at> Tested-by:
-
Chuck Lever authored
Clean up: rpcrdma_ep_destroy() returns a value that is used only to print a debugging message. rpcrdma_ep_destroy() already prints debugging messages in all error cases. Make rpcrdma_ep_destroy() return void instead. Signed-off-by:
-
Chuck Lever authored
Clean up: All remaining callers of rpcrdma_deregister_external() pass NULL as the last argument, so remove that argument. Signed-off-by:
-
Chuck Lever authored
If the selected memory registration mode is not supported by the underlying provider/HCA, the NFS mount command reports that there was an invalid mount option, and fails. This is misleading. Reporting a problem allocating memory is a lot closer to the truth. Signed-off-by:
-
Chuck Lever authored
An audit of in-kernel RDMA providers that do not support the FRMR memory registration shows that several of them support MTHCAFMR. Prefer MTHCAFMR when FRMR is not supported. If MTHCAFMR is not supported, only then choose ALLPHYSICAL. Signed-off-by:
-
Chuck Lever authored
All kernel RDMA providers except amso1100 support either MTHCAFMR or FRMR, both of which are faster than REGISTER. amso1100 can continue to use ALLPHYSICAL. The only other ULP consumer in the kernel that uses the reg_phys_mr verb is Lustre. Signed-off-by:
-
Chuck Lever authored
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were intended as stop-gap modes before the introduction of FRMR. They are now considered obsolete. MEMWINDOWS_ASYNC is also considered unsafe because it can leave client memory registered and exposed for an indeterminant time after each I/O. At this point, the MEMWINDOWS modes add needless complexity, so remove them. Signed-off-by:
-
Chuck Lever authored
Clean up: This memory registration mode is slow and was never meant for use in production environments. Remove it to reduce implementation complexity. Signed-off-by:
-
Chuck Lever authored
An IB provider can invoke rpcrdma_conn_func() in an IRQ context, thus rpcrdma_conn_func() cannot be allowed to directly invoke generic RPC functions like xprt_wake_pending_tasks(). Signed-off-by:
-
Allen Andrews authored
Two memory region leaks were found during testing: 1. rpcrdma_buffer_create: While allocating RPCRDMA_FRMR's ib_alloc_fast_reg_mr is called and then ib_alloc_fast_reg_page_list is called. If ib_alloc_fast_reg_page_list returns an error it bails out of the routine dropping the last ib_alloc_fast_reg_mr frmr region creating a memory leak. Added code to dereg the last frmr if ib_alloc_fast_reg_page_list fails. 2. rpcrdma_buffer_destroy: While cleaning up, the routine will only free the MR's on the rb_mws list if there are rb_send_bufs present. However, in rpcrdma_buffer_create while the rb_mws list is being built if one of the MR allocation requests fail after some MR's have been allocated on the rb_mws list the routine never gets to create any rb_send_bufs but instead jumps to the rpcrdma_buffer_destroy routine which will never free the MR's on rb_mws list because the rb_send_bufs were never created. This leaks all the MR's on the rb_mws list that were created prior to one of the MR allocations failing. Issue(2) was seen during testing. Our adapter had a finite number of MR's available and we created enough connections to where we saw an MR allocation failure on our Nth NFS connection request. After the kernel cleaned up the resources it had allocated for the Nth connection we noticed that FMR's had been leaked due to the coding error described above. Issue(1) was seen during a code review while debugging issue(2). Signed-off-by:
Allen Andrews <allen.andrews@emulex.com> Reviewed-by:
-
Steve Wise authored
Some rdma devices don't support a fast register page list depth of at least RPCRDMA_MAX_DATA_SEGS. So xprtrdma needs to chunk its fast register regions according to the minimum of the device max supported depth or RPCRDMA_MAX_DATA_SEGS. Signed-off-by:
-
- 30 May, 2014 3 commits
-
-
Tom Haynes authored
The object and block layouts already exist in their own subdirectories. This patch completes the set! Note that as a layout denotes nfs4 already, I stripped that prefix out of the file names. Signed-off-by:
Jeff Layton <jlayton@poochiereds.net> Signed-off-by:
-
Trond Myklebust authored
Return the NULL pointer when the allocation fails. Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Trond Myklebust authored
Return the NULL pointer when the allocation fails. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> # 3.5.x Signed-off-by:
-
- 29 May, 2014 10 commits
-
-
Scott Mayhew authored
Those flags are obsolete and checking them can incorrectly cause remount operations to fail. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
-
Andy Adamson authored
Place the call to resend the failed GETATTR under the error handler so that when appropriate, the GETATTR is retried more than once. The server can fail the GETATTR op in the OPEN compound with a recoverable error such as NFS4ERR_DELAY. In the case of an O_EXCL open, the server has created the file, so a retrans of the OPEN call will fail with NFS4ERR_EXIST. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Trond Myklebust authored
We cannot allow nfs_page_group_lock to use TASK_KILLABLE here, since the loop would cause a busy wait if somebody kills the task. Signed-off-by: -
Trond Myklebust authored
Handle the case where nfs_create_request() returns an error. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Rientjes authored
rpc_malloc() allocates with GFP_NOWAIT without making any attempt at reclaim so it easily fails when low on memory. This ends up spamming the kernel log: SLAB: Unable to allocate memory on node 0 (gfp=0x4000) cache: kmalloc-8192, object size: 8192, order: 1 node 0: slabs: 207/207, objs: 207/207, free: 0 rekonq: page allocation failure: order:1, mode:0x204000 CPU: 2 PID: 14321 Comm: rekonq Tainted: G O 3.15.0-rc3-12.gfc9498b-desktop+ #6 Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105 07/23/2010 0000000000000000 ffff880010ff17d0 ffffffff815e693c 0000000000204000 ffff880010ff1858 ffffffff81137bd2 0000000000000000 0000001000000000 ffff88011ffebc38 0000000000000001 0000000000204000 ffff88011ffea000 Call Trace: [<ffffffff815e693c>] dump_stack+0x4d/0x6f [<ffffffff81137bd2>] warn_alloc_failed+0xd2/0x140 [<ffffffff8113be19>] __alloc_pages_nodemask+0x7e9/0xa30 [<ffffffff811824a8>] kmem_getpages+0x58/0x140 [<ffffffff81183de6>] fallback_alloc+0x1d6/0x210 [<ffffffff81183be3>] ____cache_alloc_node+0x123/0x150 [<ffffffff81185953>] __kmalloc+0x203/0x490 [<ffffffffa06b0ee2>] rpc_malloc+0x32/0xa0 [sunrpc] [<ffffffffa06a6999>] call_allocate+0xb9/0x170 [sunrpc] [<ffffffffa06b19d8>] __rpc_execute+0x88/0x460 [sunrpc] [<ffffffffa06b2da9>] rpc_execute+0x59/0xc0 [sunrpc] [<ffffffffa06a932b>] rpc_run_task+0x6b/0x90 [sunrpc] [<ffffffffa077b5c1>] nfs4_call_sync_sequence+0x51/0x80 [nfsv4] [<ffffffffa077d45d>] _nfs4_do_setattr+0x1ed/0x280 [nfsv4] [<ffffffffa0782a72>] nfs4_do_setattr+0x72/0x180 [nfsv4] [<ffffffffa078334c>] nfs4_proc_setattr+0xbc/0x140 [nfsv4] [<ffffffffa074a7e8>] nfs_setattr+0xd8/0x240 [nfs] [<ffffffff811baa71>] notify_change+0x231/0x380 [<ffffffff8119cf5c>] chmod_common+0xfc/0x120 [<ffffffff8119df80>] SyS_chmod+0x40/0x90 [<ffffffff815f4cfd>] system_call_fastpath+0x1a/0x1f ... If the allocation fails, simply return NULL and avoid spamming the kernel log. Reported-by:
Marc Dietrich <marvin24@gmx.de> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Weston Andros Adamson authored
nfs_read_completion relied on the fact that there was a 1:1 mapping of page to nfs_request, but this has now changed. Regions not covered by a request have already been zeroed elsewhere. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
Use the new pg_test interface to adjust requests to fit in the current stripe / segment. Signed-off-by:
-
Weston Andros Adamson authored
Remove alignment checks that would revert to MDS and change pg_test to return the max ammount left in the segment (or other pg_test call) up to size of passed request, or 0 if no space is left. Signed-off-by:
-
Weston Andros Adamson authored
Support direct requests that span multiple pnfs data servers by comparing nfs_pgio_header->verf to a cached verf in pnfs_commit_bucket. Continue to use dreq->verf if the MDS is used / non-pNFS. Signed-off-by:
-
Weston Andros Adamson authored
Since the ability to split pages into subpage requests has been added, nfs_pgio_header->rpc_list only ever has one pgio data. Signed-off-by:
-
