Currently, there's no guarantee that udc->driver
will be valid when using soft_connect sysfs
interface. In fact, we can very easily trigger
a NULL pointer dereference by trying to disconnect
when a gadget driver isn't loaded.

Fix this bug:

~# echo disconnect > soft_connect
[   33.685743] Unable to handle kernel NULL pointer dereference at virtual address 00000014
[   33.694221] pgd = ed0cc000
[   33.697174] [00000014] *pgd=ae351831, *pte=00000000, *ppte=00000000
[   33.703766] Internal error: Oops: 17 [#1] SMP ARM
[   33.708697] Modules linked in: xhci_plat_hcd xhci_hcd snd_soc_davinci_mcasp snd_soc_tlv320aic3x snd_soc_edma snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd lis3lv02d_i2c matrix_keypad lis3lv02d dwc3_omap input_polldev soundcore
[   33.734372] CPU: 0 PID: 1457 Comm: bash Not tainted 3.17.0-09740-ga93416e-dirty #345
[   33.742457] task: ee71ce00 ti: ee68a000 task.ti: ee68a000
[   33.748116] PC is at usb_udc_softconn_store+0xa4/0xec
[   33.753416] LR is at mark_held_locks+0x78/0x90
[   33.758057] pc : [<c04df128>]    lr : [<c00896a4>]    psr: 20000013
[   33.758057] sp : ee68bec8  ip : c0c00008  fp : ee68bee4
[   33.770050] r10: ee6b394c  r9 : ee68bf80  r8 : ee6062c0
[   33.775508] r7 : 00000000  r6 : ee6062c0  r5 : 0000000b  r4 : ee739408
[   33.782346] r3 : 00000000  r2 : 00000000  r1 : ee71d390  r0 : ee664170
[   33.789168] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   33.796636] Control: 10c5387d  Table: ad0cc059  DAC: 00000015
[   33.802638] Process bash (pid: 1457, stack limit = 0xee68a248)
[   33.808740] Stack: (0xee68bec8 to 0xee68c000)
[   33.813299] bec0:                   0000000b c0411284 ee6062c0 00000000 ee68bef4 ee68bee8
[   33.821862] bee0: c04112ac c04df090 ee68bf14 ee68bef8 c01c2868 c0411290 0000000b ee6b3940
[   33.830419] bf00: 00000000 00000000 ee68bf4c ee68bf18 c01c1a24 c01c2818 00000000 00000000
[   33.838990] bf20: ee61b940 ee2f47c0 0000000b 000ce408 ee68bf80 c000f304 ee68a000 00000000
[   33.847544] bf40: ee68bf7c ee68bf50 c0152dd8 c01c1960 ee68bf7c c0170af8 ee68bf7c ee2f47c0
[   33.856099] bf60: ee2f47c0 000ce408 0000000b c000f304 ee68bfa4 ee68bf80 c0153330 c0152d34
[   33.864653] bf80: 00000000 00000000 0000000b 000ce408 b6e7fb50 00000004 00000000 ee68bfa8
[   33.873204] bfa0: c000f080 c01532e8 0000000b 000ce408 00000001 000ce408 0000000b 00000000
[   33.881763] bfc0: 0000000b 000ce408 b6e7fb50 00000004 0000000b 00000000 000c5758 00000000
[   33.890319] bfe0: 00000000 bec2c924 b6de422d b6e1d226 40000030 00000001 75716d2f 00657565
[   33.898890] [<c04df128>] (usb_udc_softconn_store) from [<c04112ac>] (dev_attr_store+0x28/0x34)
[   33.907920] [<c04112ac>] (dev_attr_store) from [<c01c2868>] (sysfs_kf_write+0x5c/0x60)
[   33.916200] [<c01c2868>] (sysfs_kf_write) from [<c01c1a24>] (kernfs_fop_write+0xd0/0x194)
[   33.924773] [<c01c1a24>] (kernfs_fop_write) from [<c0152dd8>] (vfs_write+0xb0/0x1bc)
[   33.932874] [<c0152dd8>] (vfs_write) from [<c0153330>] (SyS_write+0x54/0xb0)
[   33.940247] [<c0153330>] (SyS_write) from [<c000f080>] (ret_fast_syscall+0x0/0x48)
[   33.948160] Code: e1a01007 e12fff33 e5140004 e5143008 (e5933014)
[   33.954625] ---[ end trace f849bead94eab7ea ]---

Fixes: 2ccea03a (usb: gadget: introduce UDC Class)
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Felipe Balbi <balbi@ti.com>

So testing managed to configure musb in DMA mode but not load the
matching cppi41 driver for DMA. This results in

|musb-hdrc musb-hdrc.0.auto: Failed to request rx1.
|musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
|platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral

which is "okay". Once the driver is loaded we re-try probing and
everyone is happy. Until then if you try suspend say
    echo mem > /sys/power/state
then you go boom

|Unable to handle kernel NULL pointer dereference at virtual address 000003a4
|pgd = cf50c000
|[000003a4] *pgd=8f6a3831, *pte=00000000, *ppte=00000000
|Internal error: Oops: 17 [#1] ARM
|PC is at dsps_suspend+0x18/0x9c [musb_dsps]
|LR is at dsps_suspend+0x18/0x9c [musb_dsps]
|pc : [<bf08e268>] lr : [<bf08e268>] psr: a0000013
|sp : cbd97e00 ip : c0af4394 fp : 00000000
|r10: c0831d90 r9 : 00000002 r8 : cf6da410
|r7 : c03ba4dc r6 : bf08f224 r5 : 00000000 r4 : cbc5fcd0
|r3 : bf08e250 r2 : bf08f264 r1 : cf6da410 r0 : 00000000
|[<bf08e268>] (dsps_suspend [musb_dsps]) from [<c03ba508>] (platform_pm_suspend+0x2c/0x54)
|Code: e1a04000 e9900041 e2800010 eb4caa8e (e59053a4)

because platform_get_drvdata(glue->musb) returns a NULL pointer as long as the
device is not fully probed.
Tested-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Commit 468bcc2a ("usb: musb: dsps: kill OTG timer on suspend") stopped
the timer in suspend path but forgot the re-enable it in the resume
path. This patch fixes the behaviour.

Cc: <stable@vger.kernel.org> # v3.14+
Fixes 468bcc2a "usb: musb: dsps: kill OTG timer on suspend"
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

A request allocated from e.g. ep1out cannot
be queued to any other endpoint. This bug has
been in f_loopback at least since mid-2011 and
since nobody has really screamed about it, we're
not backporting to any stable kernels.

Debugged with MUSB since that's the only controller
which complains about this case.
Signed-off-by: Felipe Balbi <balbi@ti.com>

The commit '2e4c7553 usb: gadget: f_fs: add aio support' broke the
quirk implemented to align buffer size to maxpacketsize on out endpoint.
As result, functionfs does not work on Intel platforms using dwc3 driver
(i.e. Bay Trail and Merrifield). This patch fixes the issue.

This code is based on a previous Qiuxu's patch.

Fixes: 2e4c7553 (usb: gadget: f_fs: add aio support)
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

During FunctionFS bind, ffs_data_get() function was called twice
(in functionfs_bind() and in ffs_do_functionfs_bind()), while on unbind
ffs_data_put() was called once (in functionfs_unbind() function).
In result refcount never reached value 0, and ffs memory resources has
been never released.

Since ffs_data_get() call in ffs_do_functionfs_bind() is redundant
and not neccessary, we remove it to have equal number of gets ans puts,
and free allocated memory after refcount reach 0.

Fixes: 5920cda6 (usb: gadget: FunctionFS: convert to new function
	interface with backward compatibility)
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

If NO_DMA=y:

drivers/built-in.o: In function `xudc_done':
udc-xilinx.c:(.text+0x54f4d2): undefined reference to `usb_gadget_unmap_request'
drivers/built-in.o: In function `xudc_dma_send':
udc-xilinx.c:(.text+0x54f9f8): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `xudc_read_fifo':
udc-xilinx.c:(.text+0x54ff4a): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `xudc_ep_queue':
udc-xilinx.c:(.text+0x550e7c): undefined reference to `usb_gadget_map_request'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This reverts commit 02dae36a.

That commit is bogus in two ways:

1) There's no way dwc3-omap's ->suspend() can cause any effect
	on xhci's ->suspend(). Linux device driver model guarantees
	that a parent's ->suspend() will only be called after all
	children are suspended. dwc3-omap is the parent of the
	parent of xhci.

2) When implementing Deep Sleep states where context is lost,
	USBOTGSS_IRQ0 register, well, looses context so we
	_must_ rewrite it otherwise core IRQs will never be
	reenabled and USB will appear to be dead.

Fixes: 02dae36a (usb: dwc3: dwc3-omap: Disable/Enable only
	wrapper interrupts in prepare/complete)
Cc: <stable@vger.kernel.org> # v3.17
Cc: George Cherian <george.cherian@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

According to USB 2.0 ECN Errata for Link Power
Management (USB2-LPM-Errata-final.pdf), BESL
must be enabled if LPM is enabled.

This helps with USB30CV TD 9.21 LPM L1
Suspend Resume Test.
Signed-off-by: Felipe Balbi <balbi@ti.com>

commit c58d80f5 ("usb: musb: Ensure that cppi41 timer gets armed on
premature DMA TX irq") fixed hrtimer scheduling bug. There is one left
which does not trigger that often.
The following scenario is still possible:

    lock(&x->lock);
    hrtimer_start(&x->t);
    unlock(&x->lock);

expires:
    t->function();
                                lock(&x->lock);
    lock(&x->lock);             if (!hrtimer_queued(&x->t))
                                        hrtimer_start(&x->t);
                                unlock(&x->lock);

    if (!list_empty(x->early_tx_list))
           ret = HRTIMER_RESTART;
->         hrtimer_forward_now(...)
    } else
           ret = HRTIMER_NORESTART;

    unlock(&x->lock);

and the timer callback returns HRTIMER_RESTART for an armed timer. This
is wrong and we run into the BUG_ON() in __run_hrtimer().
This can happens on SMP or PREEMPT-RT.
The patch fixes the problem by only starting the timer if the timer is
not yet queued.

Cc: stable@vger.kernel.org
Reported-by: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: collected information and created a patch + description based
          on it]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

According to Section 8.5.3.2 of the USB 2.0 specification,
a USB device must terminate a Data Phase with either a
short packet or a ZLP (if the previous transfer was
a multiple of wMaxPacketSize).

For reference, here's what the USB 2.0 specification, section
8.5.3.2 says:

"
8.5.3.2 Variable-length Data Stage

A control pipe may have a variable-length data phase
in which the host requests more data than is contained
in the specified data structure. When all of the data
structure is returned to the host, the function should
indicate that the Data stage is ended by returning a
packet that is shorter than the MaxPacketSize for the
pipe. If the data structure is an exact multiple of
wMaxPacketSize for the pipe, the function will return
a zero-length packet to indicate the end of the Data
stage.
"
Signed-off-by: Felipe Balbi <balbi@ti.com>

if our list of requests is empty, return early.

There's really nothing to be done in case our
request list is empty anyway because the only
situation where we our list is empty, is when
we're transferring ZLPs.
Signed-off-by: Felipe Balbi <balbi@ti.com>

The device controller is the same but it has different PCI ID. Add this new
ID to the driver's list of supported IDs.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

On USB20CV's Interface Descriptor Test, a series
of SetInterface/GetInterface requests are issued
and gadget driver is required to always return
correct alternate setting.

In one step of the test, g_serial with f_obex
was returning the wrong value (1 instead of 0).

In order to fix this, we will now hold currently
selected alternate setting inside our struct f_obex
and just return that from our ->get_alt()
implementation.

Note that his also simplifies the code a bit.
Signed-off-by: Felipe Balbi <balbi@ti.com>

devices are required to provide a release method. This
patch fixes the following WARN():

[   42.611159] ------------[ cut here ]------------
[   42.616025] WARNING: CPU: 0 PID: 1453 at drivers/base/core.c:250 device_release+0x94/0xa0()
[   42.624820] Device 'snd_uac2.0' does not have a release() function, it is broken and must be fixed.
[   42.634328] Modules linked in: usb_f_uac2 g_audio(-) libcomposite configfs xhci_hcd snd_soc_davinci_mcasp snd_soc_edma snd_soc_tlv320aic3x snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress omapdrm snd_pcm_dmaengine snd_pcm snd_timer snd fb_sys_fops lis3lv02d_i2c matrix_keypad dwc3_omap lis3lv02d panel_dpi input_polldev soundcore
[   42.665687] CPU: 0 PID: 1453 Comm: modprobe Tainted: G      D        3.17.0-rc6-00448-g9f3d0ec-dirty #188
[   42.675756] [<c0017338>] (unwind_backtrace) from [<c0012fdc>] (show_stack+0x20/0x24)
[   42.683911] [<c0012fdc>] (show_stack) from [<c0647fbc>] (dump_stack+0x8c/0xa4)
[   42.691526] [<c0647fbc>] (dump_stack) from [<c0049950>] (warn_slowpath_common+0x7c/0xa0)
[   42.700004] [<c0049950>] (warn_slowpath_common) from [<c00499b4>] (warn_slowpath_fmt+0x40/0x48)
[   42.709194] [<c00499b4>] (warn_slowpath_fmt) from [<c0405f7c>] (device_release+0x94/0xa0)
[   42.717794] [<c0405f7c>] (device_release) from [<c032e8e8>] (kobject_cleanup+0x4c/0x7c)
[   42.726189] [<c032e8e8>] (kobject_cleanup) from [<c032e7c8>] (kobject_put+0x60/0x90)
[   42.734316] [<c032e7c8>] (kobject_put) from [<c0406320>] (put_device+0x24/0x28)
[   42.741995] [<c0406320>] (put_device) from [<c040c008>] (platform_device_unregister+0x2c/0x30)
[   42.751061] [<c040c008>] (platform_device_unregister) from [<bf2b6b70>] (afunc_unbind+0x2c/0x68 [usb_f_uac2])
[   42.761523] [<bf2b6b70>] (afunc_unbind [usb_f_uac2]) from [<bf29dbec>] (remove_config.isra.8+0xe8/0x100 [libcomposite])
[   42.772868] [<bf29dbec>] (remove_config.isra.8 [libcomposite]) from [<bf29f9a4>] (__composite_unbind+0x48/0xb0 [libcomposite])
[   42.784855] [<bf29f9a4>] (__composite_unbind [libcomposite]) from [<bf29fa28>] (composite_unbind+0x1c/0x20 [libcomposite])
[   42.796446] [<bf29fa28>] (composite_unbind [libcomposite]) from [<c04d229c>] (usb_gadget_remove_driver+0x78/0xb0)
[   42.807224] [<c04d229c>] (usb_gadget_remove_driver) from [<c04d2348>] (usb_gadget_unregister_driver+0x74/0xb8)
[   42.817742] [<c04d2348>] (usb_gadget_unregister_driver) from [<bf29db00>] (usb_composite_unregister+0x1c/0x20 [libcomposite])
[   42.829632] [<bf29db00>] (usb_composite_unregister [libcomposite]) from [<bf2b1084>] (audio_driver_exit+0x14/0x1c [g_audio])
[   42.841430] [<bf2b1084>] (audio_driver_exit [g_audio]) from [<c00c0fe0>] (SyS_delete_module+0x120/0x1b0)
[   42.851415] [<c00c0fe0>] (SyS_delete_module) from [<c000ed40>] (ret_fast_syscall+0x0/0x48)
[   42.860075] ---[ end trace bb22e678d8d6db7b ]---
root@saruman:~#
Signed-off-by: Felipe Balbi <balbi@ti.com>

without this check, f_uac2 would try to disable
the same endpoint twice. Fix that.
Signed-off-by: Felipe Balbi <balbi@ti.com>

Endpoint descriptors should pass wMaxPacketSize. Note
that this also fixes USB20CV Other Speed Endpoint
Descriptor Tests.
Signed-off-by: Felipe Balbi <balbi@ti.com>

when our ->disable() method is called, we must
make sure to teardown all our resources, including
endpoints.
Signed-off-by: Felipe Balbi <balbi@ti.com>

just like any other endpoint, we must enable/disable
our video control endpoint based on calls to our
->set_alt() method.
Signed-off-by: Felipe Balbi <balbi@ti.com>

During Halt Endpoint Test, our interrupt endpoint
will be disabled, which will clear out ep->desc
to NULL. Unless we call config_ep_by_speed() again,
we will not be able to enable this endpoint which
will make us fail that test.

Fixes: f9c56cdd (usb: gadget: Clear usb_endpoint_descriptor
	inside the struct usb_ep on disable)
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Felipe Balbi <balbi@ti.com>

If our alternate setting has been selected, we must
return that on a subsequent Get Interface request
even if we're not streaming.
Signed-off-by: Felipe Balbi <balbi@ti.com>

If a set_alt() to the same alternate setting that's
already selected is received, functions are required
to reset the interface state, this means we must disable
all endpoints and reenable them again.

This is also documented on our kdoc for struct usb_function

* @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
*	initialize usb_ep.driver data at this time (when it is used).
*	Note that setting an interface to its current altsetting resets
*	interface state, and that all interfaces have a disabled state.
Signed-off-by: Felipe Balbi <balbi@ti.com>

We shouldn't try to dequeue a NULL pointer.
Signed-off-by: Felipe Balbi <balbi@ti.com>

According to our Gadget Framework API documentation,
->set_halt() *must* return -EAGAIN if we have pending
transfers (on either direction) or FIFO isn't empty (on
TX endpoints).

Fix this bug so that the mass storage gadget can be used
without stall=0 parameter.

This patch should be backported to all kernels since v3.2.

Cc: <stable@vger.kernel.org> # v3.2+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Instead of releasing the lock and calling locked
versions of our set_halt() methods, let's hold
the lock all the way through and call unlocked
versions of those functions.
Signed-off-by: Felipe Balbi <balbi@ti.com>

__dwc3_gadget_ep_set_halt() is the function which
handles the actual halt feature. In order to cope
with some extra cleanup comming as a follow-up patch
let's move the isochronous endpoint check there too.
Signed-off-by: Felipe Balbi <balbi@ti.com>

dwc3_gadget_ep0_set_halt() will be called without
locks held in some cases, so we must hold the lock
on our own. While at that, also add a version without
locks to be called in certain conditions.
Signed-off-by: Felipe Balbi <balbi@ti.com>

The way trace works is that it won't decode strings
until we read the actual trace. Because of that, we
can't make assumptions of pointers still being valid
at the time we read the trace. In order to avoid that,
just copy all fields from every struct pointer we need
for our traces.

Ths patch fixes the following bug:

[ 2940.039229] Unable to handle kernel paging request at virtual address 814efa9e
[ 2940.046904] pgd = ec3dc000
[ 2940.049737] [814efa9e] *pgd=00000000
[ 2940.053552] Internal error: Oops: 5 [#1] SMP ARM
[ 2940.058379] Modules linked in: usb_f_acm u_serial g_serial usb_f_uac2 libcomposite configfs xhci_hcd dwc3 udc_core matrix_keypad dwc3_omap lis3lv02d_i2c lis3lv02d input_polldev [last unloaded: g_audio]
[ 2940.077238] CPU: 0 PID: 3020 Comm: tail Tainted: G        W
3.17.0-rc5-dirty #1097
[ 2940.085596] task: ed1b1040 ti: ed07c000 task.ti: ed07c000
[ 2940.091258] PC is at strnlen+0x18/0x68
[ 2940.095177] LR is at 0xfffffffe
[ 2940.098454] pc : [<c0356df8>]    lr : [<fffffffe>]    psr: a0000013
[ 2940.098454] sp : ed07ddb0  ip : ed07ddc0  fp : ed07ddbc
[ 2940.110445] r10: c070ff70  r9 : ed07de70  r8 : 00000000
[ 2940.115906] r7 : 814efa9e  r6 : ffffffff  r5 : ed4b6087  r4 : ed4b50c7
[ 2940.122726] r3 : 00000000  r2 : 814efa9e  r1 : ffffffff  r0 : 814efa9e
[ 2940.129546] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment user
[ 2940.137000] Control: 10c5387d  Table: ac3dc059  DAC: 00000015
[ 2940.143006] Process tail (pid: 3020, stack limit = 0xed07c248)
[ 2940.149098] Stack: (0xed07ddb0 to 0xed07e000)
[ 2940.153660] dda0:                                     ed07dde4 ed07ddc0 c0359628 c0356dec
[ 2940.162203] ddc0: 00000000 ed4b50c7 bf03ae9c ed4b6087 bf03ae9e 00000002 ed07de3c ed07dde8
[ 2940.170740] dde0: c035ab50 c0359600 ffffffff ffffffff ff0a0000 ffffffff ed07de30 ed4b5088
[ 2940.179275] de00: ed4b50c7 00000fc0 ff0a0004 ffffffff ed4b5088 ed4b5088 00000000 00001000
[ 2940.187810] de20: 00001008 00000fc0 ed4b5088 00000000 ed07de68 ed07de40 c00f1e64 c035a9c4
[ 2940.196341] de40: bf03dae0 ed07de70 ed4b4000 ec25b280 ed4b4000 ec25b280 bf03dae0 ed07de9c
[ 2940.204886] de60: ed07de78 bf033324 c00f1e0c bf03ae9c 814efa9e ed428bc0 814eca3e 00000000
[ 2940.213428] de80: 814eba3e ed4b4000 03bd1201 c0c34790 ed07ded4 ed07dea0 c00edc0c bf0332d0
[ 2940.221994] dea0: 000002c7 ed07df10 ed07decc ed07deb8 ed4b4000 0000209c ec278ac0 00000000
[ 2940.230536] dec0: 00002000 ec0db340 ed07def4 ed07ded8 c00ee7ec c00eda90 c00ee7b0 ec278ac0
[ 2940.239075] dee0: ed4b4000 000002d5 ed07df44 ed07def8 c018b8d0 c00ee7bc c0166d3c ec278af0
[ 2940.247621] df00: 0001f090 ed07df78 000002c7 00000000 000002c8 00000000 00000000 ec0db340
[ 2940.256173] df20: 0001f090 ed07df78 ec0db340 00002000 0001f090 00000000 ed07df74 ed07df48
[ 2940.264729] df40: c0166e98 c018b5f4 00000001 c018535c 000168c1 00000000 ec0db340 ec0db340
[ 2940.273284] df60: 00002000 0001f090 ed07dfa4 ed07df78 c01675c4 c0166e0c 000168c1 00000000
[ 2940.281829] df80: 00002000 0000000a 0001f090 00000003 c000f064 ed07c000 00000000 ed07dfa8
[ 2940.290365] dfa0: c000ede0 c0167584 00002000 0000000a 00000003 0001f090 00002000 00000000
[ 2940.298909] dfc0: 00002000 0000000a 0001f090 00000003 7fffe000 0001e1e0 00002004 0000002f
[ 2940.307445] dfe0: 00000000 beed38ec 000104c8 b6e6397c 40000010 00000003 00000000 00000000
[ 2940.315992] [<c0356df8>] (strnlen) from [<c0359628>] (string.isra.8+0x34/0xe8)
[ 2940.323534] [<c0359628>] (string.isra.8) from [<c035ab50>] (vsnprintf+0x198/0x3fc)
[ 2940.331461] [<c035ab50>] (vsnprintf) from [<c00f1e64>] (trace_seq_printf+0x68/0x94)
[ 2940.339494] [<c00f1e64>] (trace_seq_printf) from [<bf033324>] (ftrace_raw_output_dwc3_log_request+0x60/0x78 [dwc3])
[ 2940.350424] [<bf033324>] (ftrace_raw_output_dwc3_log_request [dwc3]) from [<c00edc0c>] (print_trace_line+0x188/0x418)
[ 2940.361507] [<c00edc0c>] (print_trace_line) from [<c00ee7ec>] (s_show+0x3c/0x12c)
[ 2940.369330] [<c00ee7ec>] (s_show) from [<c018b8d0>] (seq_read+0x2e8/0x4a0)
[ 2940.376519] [<c018b8d0>] (seq_read) from [<c0166e98>] (vfs_read+0x98/0x158)
[ 2940.383796] [<c0166e98>] (vfs_read) from [<c01675c4>] (SyS_read+0x4c/0xa0)
[ 2940.390981] [<c01675c4>] (SyS_read) from [<c000ede0>] (ret_fast_syscall+0x0/0x48)
[ 2940.398792] Code: e24cb004 e3510000 e241e001 0a000011 (e5d01000)
[ 2940.406980] ---[ end trace d8b38370fbb531f3 ]---
Signed-off-by: Felipe Balbi <balbi@ti.com>

Pull ARM SoC fixes from Olof Johansson:
 "A batch of fixes that have come in during the merge window.

  Some of them are defconfig updates for things that have now landed,
  some errata additions and a few general scattered fixes.

  There's also a qcom DT update that adds support for SATA on AP148, and
  basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed
  isolated enough that we could merge it even if it's late"

* tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: corrected bcm2835 search
  ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa
  ARM: dts: Explicitly set dr_mode on exynos Peach boards
  ARM: dts: qcom: add CM-QS600 board
  ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone
  ARM: dts: qcom: Add SATA support on IPQ8064/AP148
  MAINTAINERS: Update Santosh Shilimkar's email id
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR
  ARM: dts: Disable smc91x on n900 until bootloader dependency is removed
  ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3
  ARM: exynos_defconfig: enable USB gadget support
  ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers
  ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops
  ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n
  ARM: SAMSUNG: Restore Samsung PM Debug functionality
  ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12
  ARM: exynos_defconfig: Enable SBS battery support
  ARM: exynos_defconfig: Enable Control Groups support
  ARM: exynos_defconfig: Enable Atmel maXTouch support
  ARM: exynos_defconfig: Enable MAX77802

Pull audit updates from Eric Paris:
 "So this change across a whole bunch of arches really solves one basic
  problem.  We want to audit when seccomp is killing a process.  seccomp
  hooks in before the audit syscall entry code.  audit_syscall_entry
  took as an argument the arch of the given syscall.  Since the arch is
  part of what makes a syscall number meaningful it's an important part
  of the record, but it isn't available when seccomp shoots the
  syscall...

  For most arch's we have a better way to get the arch (syscall_get_arch)
  So the solution was two fold: Implement syscall_get_arch() everywhere
  there is audit which didn't have it.  Use syscall_get_arch() in the
  seccomp audit code.  Having syscall_get_arch() everywhere meant it was
  a useless flag on the stack and we could get rid of it for the typical
  syscall entry.

  The other changes inside the audit system aren't grand, fixed some
  records that had invalid spaces.  Better locking around the task comm
  field.  Removing some dead functions and structs.  Make some things
  static.  Really minor stuff"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: rename audit_log_remove_rule to disambiguate for trees
  audit: cull redundancy in audit_rule_change
  audit: WARN if audit_rule_change called illegally
  audit: put rule existence check in canonical order
  next: openrisc: Fix build
  audit: get comm using lock to avoid race in string printing
  audit: remove open_arg() function that is never used
  audit: correct AUDIT_GET_FEATURE return message type
  audit: set nlmsg_len for multicast messages.
  audit: use union for audit_field values since they are mutually exclusive
  audit: invalid op= values for rules
  audit: use atomic_t to simplify audit_serial()
  kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
  audit: reduce scope of audit_log_fcaps
  audit: reduce scope of audit_net_id
  audit: arm64: Remove the audit arch argument to audit_syscall_entry
  arm64: audit: Add audit hook in syscall_trace_enter/exit()
  audit: x86: drop arch from __audit_syscall_entry() interface
  sparc: implement is_32bit_task
  sparc: properly conditionalize use of TIF_32BIT
  ...

Merge tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes

Merge "qcom DT changes for v3.18-3" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18-3

* Added Board support for CM-QS600 and Sony Xperia Z1 phone
* Added SATA support on IPQ8064/AP148

* tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: dts: qcom: add CM-QS600 board
  ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone
  ARM: dts: qcom: Add SATA support on IPQ8064/AP148

Merge tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Pull more fixes from Kukjin Kim:

2nd Samsung fixes for v3.18
- Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit
  and exynos5420-arndale-octa boards, because the USB dwc3 controller
  will not work properly without dr_mode as host on above boards if
  the USB host and gadget are enabled in kernel configuration both.

* tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa
  ARM: dts: Explicitly set dr_mode on exynos Peach boards
Signed-off-by: Olof Johansson <olof@lixom.net>

Corrected bcm2835 maintainer info by using N: to specify any files with
bcm2835 in are directed to the proper maintainer.
Also corrected minor mispelling of ARCHITECTURE in 2 comment locations.
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ntb (non-transparent bridge) updates from Jon Mason:
 "Add support for Haswell NTB split BARs, a debugfs entry for basic
  debugging info, and some code clean-ups"

* tag 'ntb-3.18' of git://github.com/jonmason/ntb:
  ntb: Adding split BAR support for Haswell platforms
  ntb: use errata flag set via DID to implement workaround
  ntb: conslidate reading of PPD to move platform detection earlier
  ntb: move platform detection to separate function
  NTB: debugfs device entry

Pull i2c updates from Wolfram Sang:
 "Highlights from the I2C subsystem for 3.18:

   - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC.

   - designware driver gained AMD support, exynos gained exynos7 support

  The rest is usual driver stuff.  Hopefully no lowlights this time"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Add Device IDs for Intel Sunrise Point PCH
  i2c: hix5hd2: add i2c controller driver
  i2c-imx: Disable the clock on probe failure
  i2c: designware: Add support for AMD I2C controller
  i2c: designware: Rework probe() to get clock a bit later
  i2c: designware: Default to fast mode in case of ACPI
  i2c: axxia: Add I2C driver for AXM55xx
  i2c: exynos: add support for HSI2C module on Exynos7
  i2c: mxs: detect No Slave Ack on SELECT in PIO mode
  i2c: cros_ec: Remove EC_I2C_FLAG_10BIT
  i2c: cros-ec-tunnel: Add of match table
  i2c: rcar: remove sign-compare flaw
  i2c: ismt: Use minimum descriptor size
  i2c: imx: Add arbitration lost check
  i2c: rk3x: Remove unlikely() annotations
  i2c: rcar: check for no IRQ in rcar_i2c_irq()
  i2c: rcar: make rcar_i2c_prepare_msg() *void*
  i2c: rcar: simplify check for last message
  i2c: designware: add support of platform data to set I2C mode
  i2c: designware: add support of I2C standard mode

Pull sound fixes from Takashi Iwai:
 "Here are a collection of small fixes after 3.18 merge.

  The urgent one is the fix for kernel panics with linked PCM substream
  triggered by the recent nonatomic PCM ops support.  Other two fixes
  (emu10k1 and bebob) are stable fixes, and one easy PCI ID addition for
  a new Intel HD-audio controller"

* tag 'sound-fix-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda_intel: Add Device IDs for Intel Sunrise Point PCH
  ALSA: emu10k1: Fix deadlock in synth voice lookup
  ALSA: pcm: Fix referred substream in snd_pcm_action_group() unlock loop
  ALSA: bebob: Fix failure to detect source of clock for Terratec Phase 88

Pull second round of input updates from Dmitry Torokhov:
 "Mostly simple bug fixes, although we do have one brand new driver for
  Microchip AR1021 i2c touchscreen.

  Also there is the change to stop trying to use i8042 active
  multiplexing by default (it is still possible to activate it via
  i8042.nomux=0 on boxes that implement it)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - add Thrustmaster as Xbox 360 controller vendor
  Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel
  Input: max77693-haptic - fix state check in imax77693_haptic_disable()
  Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend
  Input: alps - fix v4 button press recognition
  Input: i8042 - disable active multiplexing by default
  Input: i8042 - add noloop quirk for Asus X750LN
  Input: synaptics - gate forcepad support by DMI check
  Input: Add Microchip AR1021 i2c touchscreen
  Input: cros_ec_keyb - add of match table
  Input: serio - avoid negative serio device numbers
  Input: avoid negative input device numbers
  Input: automatically set EV_ABS bit in input_set_abs_params
  Input: adp5588-keys - cancel workqueue in failure path
  Input: opencores-kbd - switch to using managed resources
  Input: evdev - fix EVIOCG{type} ioctl

Pull infiniband/RDMA updates from Roland Dreier:
 - large set of iSER initiator improvements
 - hardware driver fixes for cxgb4, mlx5 and ocrdma
 - small fixes to core midlayer

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (47 commits)
  RDMA/cxgb4: Fix ntuple calculation for ipv6 and remove duplicate line
  RDMA/cxgb4: Add missing neigh_release in find_route
  RDMA/cxgb4: Take IPv6 into account for best_mtu and set_emss
  RDMA/cxgb4: Make c4iw_wr_log_size_order static
  IB/core: Fix XRC race condition in ib_uverbs_open_qp
  IB/core: Clear AH attr variable to prevent garbage data
  RDMA/ocrdma: Save the bit environment, spare unncessary parenthesis
  RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use it
  RDMA/ocrdma: Don't memset() buffers we just allocated with kzalloc()
  RDMA/ocrdma: Remove a unused-label warning
  RDMA/ocrdma: Convert kernel VA to PA for mmap in user
  RDMA/ocrdma: Get vlan tag from ib_qp_attrs
  RDMA/ocrdma: Add default GID at index 0
  IB/mlx5, iser, isert: Add Signature API additions
  Target/iser: Centralize ib_sig_domain setting
  IB/iser: Centralize ib_sig_domain settings
  IB/mlx5: Use extended internal signature layout
  IB/iser: Set IP_CSUM as default guard type
  IB/iser: Remove redundant assignment
  IB/mlx5: Use enumerations for PI copy mask
  ...

Pull more perf updates from Ingo Molnar:
 "A second (and last) round of late coming fixes and changes, almost all
  of them in perf tooling:

  User visible tooling changes:

   - Add period data column and make it default in 'perf script' (Jiri
     Olsa)

   - Add a visual cue for toggle zeroing of samples in 'perf top'
     (Taeung Song)

   - Improve callchains when using libunwind (Namhyung Kim)

  Tooling fixes and infrastructure changes:

   - Fix for double free in 'perf stat' when using some specific invalid
     command line combo (Yasser Shalabi)

   - Fix off-by-one bugs in map->end handling (Stephane Eranian)

   - Fix off-by-one bug in maps__find(), also related to map->end
     handling (Namhyung Kim)

   - Make struct symbol->end be the first addr after the symbol range,
     to make it match the convention used for struct map->end.  (Arnaldo
     Carvalho de Melo)

   - Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat
     live' (Jiri Olsa)

   - Fix python test build by moving callchain_param to an object linked
     into the python binding (Jiri Olsa)

   - Document sysfs events/ interfaces (Cody P Schafer)

   - Fix typos in perf/Documentation (Masanari Iida)

   - Add missing 'struct option' forward declaration (Arnaldo Carvalho
     de Melo)

   - Add option to copy events when queuing for sorting across cpu
     buffers and enable it for 'perf kvm stat live', to avoid having
     events left in the queue pointing to the ring buffer be rewritten
     in high volume sessions.  (Alexander Yarygin, improving work done
     by David Ahern):

   - Do not include a struct hists per perf_evsel, untangling the
     histogram code from perf_evsel, to pave the way for exporting a
     minimalistic tools/lib/api/perf/ library usable by tools/perf and
     initially by the rasd daemon being developed by Borislav Petkov,
     Robert Richter and Jean Pihet.  (Arnaldo Carvalho de Melo)

   - Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and
     thread maps mean syswide monitoring, reducing the boilerplate for
     tools that only want system wide mode.  (Arnaldo Carvalho de Melo)

   - Move exit stuff from perf_evsel__delete to perf_evsel__exit, delete
     should be just a front end for exit + free (Arnaldo Carvalho de
     Melo)

   - Add support to new style format of kernel PMU event.  (Kan Liang)

  and other misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  perf script: Add period as a default output column
  perf script: Add period data column
  perf evsel: No need to drag util/cgroup.h
  perf evlist: Add missing 'struct option' forward declaration
  perf evsel: Move exit stuff from __delete to __exit
  kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE define
  perf kvm stat live: Enable events copying
  perf session: Add option to copy events when queueing
  perf Documentation: Fix typos in perf/Documentation
  perf trace: Use thread_{,_set}_priv helpers
  perf kvm: Use thread_{,_set}_priv helpers
  perf callchain: Create an address space per thread
  perf report: Set callchain_param.record_mode for future use
  perf evlist: Fix for double free in tools/perf stat
  perf test: Add test case for pmu event new style format
  perf tools: Add support to new style format of kernel PMU event
  perf tools: Parse the pmu event prefix and suffix
  Revert "perf tools: Default to cpu// for events v5"
  perf Documentation: Remove Ruplicated docs for powerpc cpu specific events
  perf Documentation: sysfs events/ interfaces
  ...