- 30 Jul, 2010 21 commits
-
-
FUJITA Tomonori authored
In 2.6.34, we transformed the PCI DMA API into the generic device mode. The PCI DMA API is just the wrapper of the DMA API. So we don't need HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE or HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY (which enable architectures to have the own implementations). Both haven't been used anyway. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jacob Pan authored
It is a known issue that mmio decoding shall be disabled while doing PCI bar sizing. Host bridge and other devices (PCI PIC) shall be excluded for certain platforms. This patch mainly comes from Mathew Willcox's patch in http://kerneltrap.org/mailarchive/linux-kernel/2007/9/13/258969. A new flag bit "mmio_alway_on" is added to pci_dev with the intention that devices with their mmio decoding cannot be disabled during BAR sizing shall have this bit set, preferrablly in their quirks. Without this patch, Intel Moorestown platform graphics unit will be corrupted during bar sizing activities. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
-
Ben Hutchings authored
During suspend on an SMP system, {read,write}_msi_msg_desc() may be called to mask and unmask interrupts on a device that is already in a reduced power state. At this point memory-mapped registers including MSI-X tables are not accessible, and config space may not be fully functional either. While a device is in a reduced power state its interrupts are effectively masked and its MSI(-X) state will be restored when it is brought back to D0. Therefore these functions can simply read and write msi_desc::msg for devices not in D0. Further, read_msi_msg_desc() should only ever be used to update a previously written message, so it can always read msi_desc::msg and never needs to touch the hardware. Tested-by:"Michael Chan" <mchan@broadcom.com> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Matthew Garrett authored
The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by:
-
Kenji Kaneshige authored
I encountered the problem that /proc/bus/pci/XX/YY is not removed even after the corresponding device is hot-removed, if the file is still being opened. In addtion, accessing this file in this situation causes kernel panic (see below). Becasue the pci_proc_detach_device() doesn't call remove_proc_entry() if struct proc_dir_entry->count > 1, access to /proc/bus/pci/XX/YY would refer to struct pci_dev that was already freed. Though I don't know why the check for proc_dir_entry->count was added, I don't think it is needed. Removing this check fixes the problem. Steps to reproduce ------------------ # cd /sys/bus/pci/slots/2/ # PROC_BUS_PCI_FILE=/proc/bus/pci/`awk -F: '{print $2"/"$3}' < address`.0 # sleep 10000 < $PROC_BUS_PCI_FILE & # echo 0 > power # while true; do cat $PROC_BUS_PCI_FILE > /dev/null; done Oops Messages ------------- BUG: unable to handle kernel NULL pointer dereference at 00000042 IP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 *pdpt = 000000002185e001 *pde = 0000000476a79067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:10:00.0/local_cpus Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq ipv6 dm_mirror dm_region_hash dm_log dm_mod e1000e i2c_i801 i2c_core iTCO_wdt igb sg pcspkr dca iTCO_vendor_support ext4 mbcache jbd2 sd_mod crc_t10dif lpfc mptsas scsi_transport_fc mptscsih mptbase scsi_tgt scsi_transport_sas [last unloaded: microcode] Pid: 2997, comm: cat Not tainted 2.6.34-kk #32 SB/PRIMEQUEST 1800E EIP: 0060:[<c05c82d5>] EFLAGS: 00010046 CPU: 19 EIP is at pci_user_read_config_dword+0x65/0xa0 EAX: 00000002 EBX: e44f1800 ECX: e144df14 EDX: 155668c7 ESI: 00000087 EDI: 00000000 EBP: e144df40 ESP: e144df0c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 2997, ti=e144c000 task=e26f2570 task.ti=e144c000) Stack: c09ceac0 c0570f72 ffffffff 08c57000 00000000 00001000 e44f1800 c05d2404 <0> e144df40 00001000 00000000 00001000 08c57000 3093ae50 e420cb40 e358d5c0 <0> c05d2300 fffffffb c054984f e144df9c 00008000 08c57000 e358d5c0 00008000 Call Trace: [<c0570f72>] ? security_capable+0x22/0x30 [<c05d2404>] ? proc_bus_pci_read+0x104/0x220 [<c05d2300>] ? proc_bus_pci_read+0x0/0x220 [<c054984f>] ? proc_reg_read+0x5f/0x90 [<c05497f0>] ? proc_reg_read+0x0/0x90 [<c050694d>] ? vfs_read+0x9d/0x190 [<c04958f4>] ? audit_syscall_entry+0x204/0x230 [<c0506a81>] ? sys_read+0x41/0x70 [<c0402f1f>] ? sysenter_do_call+0x12/0x28 Code: b4 26 00 00 00 00 b8 20 88 b1 c0 c7 44 24 08 ff ff ff ff e8 3e 52 22 00 f6 83 24 04 00 00 20 75 34 8b 43 08 8d 4c 24 08 8b 53 1c <8b> 70 40 89 4c 24 04 89 f9 c7 04 24 04 00 00 00 ff 16 89 c6 f0 EIP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 SS:ESP 0068:e144df0c CR2: 0000000000000042 Acked-by:Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Kulikov Vasiliy authored
Remove unnesessary casts from void*. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Matthew Garrett authored
The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control. Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Yinghai Lu authored
Found one PCIe Module with several bridges built-in where a "cold" hotadd doesn't work. If we end up reassigning bridge windows at hotadd time, and have to loop through assigning new ranges, we won't end up enabling the child bridges because the first assignment pass already tried to enable them, which prevents __pci_bridge_assign_resource from updating the windows. So try to move enabling of child bridges to the end, and only do it once. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Praveen Kalamegham authored
Removed check to prevent hotplug of display devices within shpchp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by:
Praveen Kalamegham <praveen@nextio.com> Signed-off-by:
-
Praveen Kalamegham authored
pciehp_unconfigure_device() should return -EINVAL, not EINVAL. Signed-off-by:
-
Matthew Garrett authored
The aspm code will currently set the configured aspm policy before drivers have had an opportunity to indicate that their hardware doesn't support it. Unfortunately, putting some hardware in L0 or L1 can result in the hardware no longer responding to any requests, even after aspm is disabled. It makes more sense to leave aspm policy at the BIOS defaults at initial setup time, reconfiguring it after pci_enable_device() is called. This allows the driver to blacklist individual devices beforehand. Reviewed-by:
-
Kenji Kaneshige authored
Use resource_size_t for MMIO address instead of unsigned long. Otherwise, higher 32-bits of MMIO address are cleared unexpectedly in x86-32 PAE. Acked-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Junchang Wang authored
pci_enable_device can fail. In that case, a printed warning would be more appropriate. Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
Junchang Wang <junchangwang@gmail.com> Signed-off-by:
-
Stephen Hemminger authored
Assigning zero where NULL should be used. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Mike Habeck authored
The Linux kernel assigns BARs that a BIOS did not assign, most likely to handle broken BIOSes that didn't enumerate the devices correctly. On UV the BIOS purposely doesn't assign I/O BARs for certain devices/ drivers we know don't use them (examples, LSI SAS, Qlogic FC, ...). We purposely don't assign these I/O BARs because I/O Space is a very limited resource. There is only 64k of I/O Space, and in a PCIe topology that space gets divided up into 4k chucks (this is due to the fact that a pci-to-pci bridge's I/O decoder is aligned at 4k)... Thus a system can have at most 16 cards with I/O BARs: (64k / 4k = 16) SGI needs to scale to >16 devices with I/O BARs. So by not assigning I/O BARs on devices we know don't use them, we can do that (iff the kernel doesn't go and assign these BARs that the BIOS purposely didn't assign). This patch will not assign a resource to a device BAR if that BAR was not assigned by the BIOS, and the kernel cmdline option 'pci=nobar' was specified. This patch is closely modeled after the 'pci=norom' option that currently exists in the tree. Signed-off-by:
Mike Habeck <habeck@sgi.com> Signed-off-by:
Mike Travis <travis@sgi.com> Signed-off-by:
-
Tejun Heo authored
MSI delivery from on-board ahci controller doesn't work on K8M800. At this point, it's unclear whether the culprit is with the ahci controller or the host bridge. Given the track record and considering the rather minimal impact of MSI, disabling it seems reasonable. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com> Cc: stable@kernel.org Signed-off-by:
-
Clemens Ladisch authored
In all AMD 780 family northbridges, the vendor ID of the internal graphics PCI/PCI bridge reads not as AMD but as that of the mainboard vendor, because the hardware actually returns the value of the subsystem vendor ID (erratum 18). We currently have additional quirk entries for Asus and Acer, but it is likely that we will encounter more systems with other vendor IDs. Since we do not know in advance all possible vendor IDs, a better way to find the device is to declare the quirk on the host bridge, whose ID is always correct, and use that device as a stepping stone to find the PCI/ PCI bridge, if present. Reviewed-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Dan Carpenter authored
The SLOT_REG_RSVDZ_MASK macro is normally used like this: slot_reg &= ~SLOT_REG_RSVDZ_MASK; The ~ operator has higher precedence than the | operator from inside the macro, so it needs parenthesis. Reviewed-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Linus Torvalds authored
Some compiler generates following warnings: In function 'aer_isr': warning: 'e_src.id' may be used uninitialized in this function warning: 'e_src.status' may be used uninitialized in this function Avoid status flag "int ret" and return constants instead, so that gcc sees the return value matching "it is initialized" better. Acked-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
pcibios_scan_specific_bus calls pci_scan_bus_on_node which is __devinit. Mark pcibios_scan_specific_bus __devinit as well since all users are now __init or __devinit. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Alan Stern authored
This patch (as1388) changes the way the PCI core handles runtime PM settings when probing or unbinding drivers. Now the core will make sure the device is enabled for runtime PM, with a usage count >= 1, when a driver is probed. It does the same when calling a driver's remove method. If the driver wants to use runtime PM, all it has to do is call pm_runtime_pu_noidle() near the end of its probe routine (to cancel the core's usage increment) and pm_runtime_get_noresume() near the start of its remove routine (to restore the usage count). It does not need to mess around with setting the runtime state to enabled, disabled, active, or suspended. The patch updates e1000e and r8169, the only PCI drivers that already use the existing runtime PM interface. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
-
- 29 Jul, 2010 12 commits
-
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] etr: fix clock synchronization race [S390] Fix IRQ tracing in case of PER
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: update MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add a PC-beep workaround for ASUS P5-V ALSA: hda - Assume PC-beep as default for Realtek ALSA: hda - Don't register beep input device when no beep is available ALSA: hda - Fix pin-detection of Nvidia HDMI
-
David Howells authored
Fix __task_cred()'s lockdep check by removing the following validation condition: lockdep_tasklist_lock_is_held() as commit_creds() does not take the tasklist_lock, and nor do most of the functions that call it, so this check is pointless and it can prevent detection of the RCU lock not being held if the tasklist_lock is held. Instead, add the following validation condition: task->exit_state >= 0 to permit the access if the target task is dead and therefore unable to change its own credentials. Fix __task_cred()'s comment to: (1) discard the bit that says that the caller must prevent the target task from being deleted. That shouldn't need saying. (2) Add a comment indicating the result of __task_cred() should not be passed directly to get_cred(), but rather than get_task_cred() should be used instead. Also put a note into the documentation to enforce this point there too. Signed-off-by:David Howells <dhowells@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
David Howells authored
It's possible for get_task_cred() as it currently stands to 'corrupt' a set of credentials by incrementing their usage count after their replacement by the task being accessed. What happens is that get_task_cred() can race with commit_creds(): TASK_1 TASK_2 RCU_CLEANER -->get_task_cred(TASK_2) rcu_read_lock() __cred = __task_cred(TASK_2) -->commit_creds() old_cred = TASK_2->real_cred TASK_2->real_cred = ... put_cred(old_cred) call_rcu(old_cred) [__cred->usage == 0] get_cred(__cred) [__cred->usage == 1] rcu_read_unlock() -->put_cred_rcu() [__cred->usage == 1] panic() However, since a tasks credentials are generally not changed very often, we can reasonably make use of a loop involving reading the creds pointer and using atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero. If successful, we can safely return the credentials in the knowledge that, even if the task we're accessing has released them, they haven't gone to the RCU cleanup code. We then change task_state() in procfs to use get_task_cred() rather than calling get_cred() on the result of __task_cred(), as that suffers from the same problem. Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be tripped when it is noticed that the usage count is not zero as it ought to be, for example: kernel BUG at kernel/cred.c:168! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run CPU 0 Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex 745 RIP: 0010:[<ffffffff81069881>] [<ffffffff81069881>] __put_cred+0xc/0x45 RSP: 0018:ffff88019e7e9eb8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0 RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0 R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001 FS: 00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0) Stack: ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45 <0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000 <0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246 Call Trace: [<ffffffff810698cd>] put_cred+0x13/0x15 [<ffffffff81069b45>] commit_creds+0x16b/0x175 [<ffffffff8106aace>] set_current_groups+0x47/0x4e [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00 48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b 04 25 00 cc 00 00 48 3b b8 58 04 00 00 75 RIP [<ffffffff81069881>] __put_cred+0xc/0x45 RSP <ffff88019e7e9eb8> ---[ end trace df391256a100ebdd ]--- Signed-off-by:
-
Wim Van Sebroeck authored
Add Mailing-list and website to watchdog MAINTAINERS entry. Signed-off-by:Wim Van Sebroeck <wim@iguana.be>
-
Takashi Iwai authored
ASUS P5-V provides a SSID that unexpectedly matches with the value compilant with Realtek's specification. Thus the driver interprets it badly, resulting in non-working PC beep. This patch adds a white-list for such a case; a white-list of known devices with working PC beep. Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: x86,kgdb: Fix hw breakpoint regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe [SCSI] zfcp: Update status read mempool [SCSI] zfcp: Do not wait for SBALs on stopped queue [SCSI] zfcp: Fix check whether unchained ct_els is possible [SCSI] ipr: fix resource path display and formatting
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register wm8350-regulator: fix wm8350_register_regulator error handling ab3100: fix off-by-one value range checking for voltage selector
-
Andre Osterhues authored
The function ecryptfs_uid_hash wrongly assumes that the second parameter to hash_long() is the number of hash buckets instead of the number of hash bits. This patch fixes that and renames the variable ecryptfs_hash_buckets to ecryptfs_hash_bits to make it clearer. Fixes: CVE-2010-2492 Signed-off-by:
Andre Osterhues <aosterhues@escrypt.com> Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
Jason Wessel authored
HW breakpoints events stopped working correctly with kgdb as a result of commit: 018cbffe (Merge commit 'v2.6.33' into perf/core). The regression occurred because the behavior changed for setting NOTIFY_STOP as the return value to the die notifier if the breakpoint was known to the HW breakpoint API. Because kgdb is using the HW breakpoint API to register HW breakpoints slots, it must also now implement the overflow_handler call back else kgdb does not get to see the events from the die notifier. The kgdb_ll_trap function will be changed to be general purpose code which can allow an easy way to implement the hw_breakpoint API overflow call back. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Acked-by:
Dongdong Deng <dongdong.deng@windriver.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
- 28 Jul, 2010 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: use complete_all and wake_up_all ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES" ceph: fix dentry lease release ceph: fix leak of dentry in ceph_init_dentry() error path ceph: fix pg_mapping leak on pg_temp updates ceph: fix d_release dop for snapdir, snapped dentries ceph: avoid dcache readdir for snapdir
-
Steven Whitehouse authored
If we don't need a huge amount of memory in ->readdir() then we can use kmalloc rather than vmalloc to allocate it. This should cut down on the greater overheads associated with vmalloc for smaller directories. We may be able to eliminate vmalloc entirely at some stage, but this is easy to do right away. Also using GFP_NOFS to avoid any issues wrt to deleting inodes while under a glock, and suggestion from Linus to factor out the alloc/dealloc. I've given this a test with a variety of different sized directories and it seems to work ok. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Takashi Iwai authored
Enable PC-beep as default for hardwares that aren't compliant with the SSID value Realtek requires. In such a case, better to enable the beep to avoid a regression. Signed-off-by: -
Takashi Iwai authored
We check now the availability of PC beep and skip the build of beep mixers, but the driver still registers the input device. This should be checked as well. Signed-off-by: -
Sekhar Nori authored
Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by:Sekhar Nori <nsekhar@ti.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Liam Girdwood <lrg@slimlogic.co.uk>
-
Anuj Aggarwal authored
Acked-by:
Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by:
-
Takashi Iwai authored
The behavior of Nvidia HDMI codec regarding the pin-detection unsol events is based on the old HD-audio spec, i.e. PD bit indicates only the update and doesn't show the current state. Since the current code assumes the new behavior, the pin-detection doesn't work relialby with these h/w. This patch adds a flag for indicating the old spec, and fixes the issue by checking the pin-detection explicitly for such hardware. Tested-by:
Wei Ni <wni@nvidia.com> Cc: <stable@kernel.org> Signed-off-by:
-
