1. 30 Aug, 2017 40 commits
    • Aaro Koskinen's avatar
      ASoC: simple-card: don't fail if sysclk setting is not supported · bfba69dc
      Aaro Koskinen authored
      commit ee43a1a0 upstream.
      
      Commit e2257971 ("ASoC: simple card: set cpu-dai sysclk
      with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
      asoc_simple_card_hw_params fail if the operation is not supported,
      although the intention clearly was to ignore ENOTSUPP. Fix it.
      
      The patch fixes audio playback on Kirkwood / OpenRD client,
      where the following errors are seen:
      
      	asoc-simple-card sound: ASoC: machine hw_params failed: -524
      	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524
      
      Fixes: e2257971 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
      Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bfba69dc
    • Charles Milette's avatar
      staging: rtl8188eu: add RNX-N150NUB support · eb2ba09b
      Charles Milette authored
      commit f299aec6 upstream.
      
      Add support for USB Device Rosewill RNX-N150NUB.
      VendorID: 0x0bda, ProductID: 0xffef
      Signed-off-by: default avatarCharles Milette <charles.milette@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eb2ba09b
    • Srinivas Pandruvada's avatar
      iio: hid-sensor-trigger: Fix the race with user space powering up sensors · 1d7e8cf0
      Srinivas Pandruvada authored
      commit f1664eaa upstream.
      
      It has been reported for a while that with iio-sensor-proxy service the
      rotation only works after one suspend/resume cycle. This required a wait
      in the systemd unit file to avoid race. I found a Yoga 900 where I could
      reproduce this.
      
      The problem scenerio is:
      - During sensor driver init, enable run time PM and also set a
        auto-suspend for 3 seconds.
      	This result in one runtime resume. But there is a check to avoid
      a powerup in this sequence, but rpm is active
      - User space iio-sensor-proxy tries to power up the sensor. Since rpm is
        active it will simply return. But sensors were not actually
      powered up in the prior sequence, so actaully the sensors will not work
      - After 3 seconds the auto suspend kicks
      
      If we add a wait in systemd service file to fire iio-sensor-proxy after
      3 seconds, then now everything will work as the runtime resume will
      actually powerup the sensor as this is a user request.
      
      To avoid this:
      - Remove the check to match user requested state, this will cause a
        brief powerup, but if the iio-sensor-proxy starts immediately it will
      still work as the sensors are ON.
      - Also move the autosuspend delay to place when user requested turn off
        of sensors, like after user finished raw read or buffer disable
      Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
      Tested-by: default avatarBastien Nocera <hadess@hadess.net>
      Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1d7e8cf0
    • Dragos Bogdan's avatar
      iio: imu: adis16480: Fix acceleration scale factor for adis16480 · d2c072cb
      Dragos Bogdan authored
      commit fdd0d32e upstream.
      
      According to the datasheet, the range of the acceleration is [-10 g, + 10 g],
      so the scale factor should be 10 instead of 5.
      Signed-off-by: default avatarDragos Bogdan <dragos.bogdan@analog.com>
      Acked-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d2c072cb
    • Martijn Coenen's avatar
      ANDROID: binder: fix proc->tsk check. · 9dac44d5
      Martijn Coenen authored
      commit b2a6d1b9 upstream.
      
      Commit c4ea41ba ("binder: use group leader instead of open thread")'
      was incomplete and didn't update a check in binder_mmap(), causing all
      mmap() calls into the binder driver to fail.
      Signed-off-by: default avatarMartijn Coenen <maco@android.com>
      Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9dac44d5
    • Riley Andrews's avatar
      binder: Use wake up hint for synchronous transactions. · 1792d6c1
      Riley Andrews authored
      commit 00b40d61 upstream.
      
      Use wake_up_interruptible_sync() to hint to the scheduler binder
      transactions are synchronous wakeups. Disable preemption while waking
      to avoid ping-ponging on the binder lock.
      Signed-off-by: default avatarTodd Kjos <tkjos@google.com>
      Signed-off-by: default avatarOmprakash Dhyade <odhyade@codeaurora.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1792d6c1
    • Todd Kjos's avatar
      binder: use group leader instead of open thread · 596b97ec
      Todd Kjos authored
      commit c4ea41ba upstream.
      
      The binder allocator assumes that the thread that
      called binder_open will never die for the lifetime of
      that proc. That thread is normally the group_leader,
      however it may not be. Use the group_leader instead
      of current.
      Signed-off-by: default avatarTodd Kjos <tkjos@google.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      596b97ec
    • Jeffy Chen's avatar
      Bluetooth: bnep: fix possible might sleep error in bnep_session · e1c7a447
      Jeffy Chen authored
      commit 25717382 upstream.
      
      It looks like bnep_session has same pattern as the issue reported in
      old rfcomm:
      
      	while (1) {
      		set_current_state(TASK_INTERRUPTIBLE);
      		if (condition)
      			break;
      		// may call might_sleep here
      		schedule();
      	}
      	__set_current_state(TASK_RUNNING);
      
      Which fixed at:
      	dfb2fae7 Bluetooth: Fix nested sleeps
      
      So let's fix it at the same way, also follow the suggestion of:
      https://lwn.net/Articles/628628/Signed-off-by: default avatarJeffy Chen <jeffy.chen@rock-chips.com>
      Reviewed-by: default avatarBrian Norris <briannorris@chromium.org>
      Reviewed-by: default avatarAL Yu-Chen Cho <acho@suse.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Cc: Jiri Slaby <jslaby@suse.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e1c7a447
    • Jeffy Chen's avatar
      Bluetooth: cmtp: fix possible might sleep error in cmtp_session · f9adf422
      Jeffy Chen authored
      commit f06d9773 upstream.
      
      It looks like cmtp_session has same pattern as the issue reported in
      old rfcomm:
      
      	while (1) {
      		set_current_state(TASK_INTERRUPTIBLE);
      		if (condition)
      			break;
      		// may call might_sleep here
      		schedule();
      	}
      	__set_current_state(TASK_RUNNING);
      
      Which fixed at:
      	dfb2fae7 Bluetooth: Fix nested sleeps
      
      So let's fix it at the same way, also follow the suggestion of:
      https://lwn.net/Articles/628628/Signed-off-by: default avatarJeffy Chen <jeffy.chen@rock-chips.com>
      Reviewed-by: default avatarBrian Norris <briannorris@chromium.org>
      Reviewed-by: default avatarAL Yu-Chen Cho <acho@suse.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Cc: Jiri Slaby <jslaby@suse.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f9adf422
    • Jeffy Chen's avatar
      Bluetooth: hidp: fix possible might sleep error in hidp_session_thread · 172bbb8e
      Jeffy Chen authored
      commit 5da8e47d upstream.
      
      It looks like hidp_session_thread has same pattern as the issue reported in
      old rfcomm:
      
      	while (1) {
      		set_current_state(TASK_INTERRUPTIBLE);
      		if (condition)
      			break;
      		// may call might_sleep here
      		schedule();
      	}
      	__set_current_state(TASK_RUNNING);
      
      Which fixed at:
      	dfb2fae7 Bluetooth: Fix nested sleeps
      
      So let's fix it at the same way, also follow the suggestion of:
      https://lwn.net/Articles/628628/Signed-off-by: default avatarJeffy Chen <jeffy.chen@rock-chips.com>
      Tested-by: default avatarAL Yu-Chen Cho <acho@suse.com>
      Tested-by: default avatarRohit Vaswani <rvaswani@nvidia.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Cc: Jiri Slaby <jslaby@suse.cz>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      172bbb8e
    • Mark Rutland's avatar
      perf/core: Fix group {cpu,task} validation · 708d19ea
      Mark Rutland authored
      commit 64aee2a9 upstream.
      
      Regardless of which events form a group, it does not make sense for the
      events to target different tasks and/or CPUs, as this leaves the group
      inconsistent and impossible to schedule. The core perf code assumes that
      these are consistent across (successfully intialised) groups.
      
      Core perf code only verifies this when moving SW events into a HW
      context. Thus, we can violate this requirement for pure SW groups and
      pure HW groups, unless the relevant PMU driver happens to perform this
      verification itself. These mismatched groups subsequently wreak havoc
      elsewhere.
      
      For example, we handle watchpoints as SW events, and reserve watchpoint
      HW on a per-CPU basis at pmu::event_init() time to ensure that any event
      that is initialised is guaranteed to have a slot at pmu::add() time.
      However, the core code only checks the group leader's cpu filter (via
      event_filter_match()), and can thus install follower events onto CPUs
      violating thier (mismatched) CPU filters, potentially installing them
      into a CPU without sufficient reserved slots.
      
      This can be triggered with the below test case, resulting in warnings
      from arch backends.
      
        #define _GNU_SOURCE
        #include <linux/hw_breakpoint.h>
        #include <linux/perf_event.h>
        #include <sched.h>
        #include <stdio.h>
        #include <sys/prctl.h>
        #include <sys/syscall.h>
        #include <unistd.h>
      
        static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
      			   int group_fd, unsigned long flags)
        {
      	return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
        }
      
        char watched_char;
      
        struct perf_event_attr wp_attr = {
      	.type = PERF_TYPE_BREAKPOINT,
      	.bp_type = HW_BREAKPOINT_RW,
      	.bp_addr = (unsigned long)&watched_char,
      	.bp_len = 1,
      	.size = sizeof(wp_attr),
        };
      
        int main(int argc, char *argv[])
        {
      	int leader, ret;
      	cpu_set_t cpus;
      
      	/*
      	 * Force use of CPU0 to ensure our CPU0-bound events get scheduled.
      	 */
      	CPU_ZERO(&cpus);
      	CPU_SET(0, &cpus);
      	ret = sched_setaffinity(0, sizeof(cpus), &cpus);
      	if (ret) {
      		printf("Unable to set cpu affinity\n");
      		return 1;
      	}
      
      	/* open leader event, bound to this task, CPU0 only */
      	leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
      	if (leader < 0) {
      		printf("Couldn't open leader: %d\n", leader);
      		return 1;
      	}
      
      	/*
      	 * Open a follower event that is bound to the same task, but a
      	 * different CPU. This means that the group should never be possible to
      	 * schedule.
      	 */
      	ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
      	if (ret < 0) {
      		printf("Couldn't open mismatched follower: %d\n", ret);
      		return 1;
      	} else {
      		printf("Opened leader/follower with mismastched CPUs\n");
      	}
      
      	/*
      	 * Open as many independent events as we can, all bound to the same
      	 * task, CPU0 only.
      	 */
      	do {
      		ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
      	} while (ret >= 0);
      
      	/*
      	 * Force enable/disble all events to trigger the erronoeous
      	 * installation of the follower event.
      	 */
      	printf("Opened all events. Toggling..\n");
      	for (;;) {
      		prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
      		prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
      	}
      
      	return 0;
        }
      
      Fix this by validating this requirement regardless of whether we're
      moving events.
      Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Zhou Chengming <zhouchengming1@huawei.com>
      Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      708d19ea
    • Chuck Lever's avatar
      nfsd: Limit end of page list when decoding NFSv4 WRITE · 87ac57ff
      Chuck Lever authored
      commit fc788f64 upstream.
      
      When processing an NFSv4 WRITE operation, argp->end should never
      point past the end of the data in the final page of the page list.
      Otherwise, nfsd4_decode_compound can walk into uninitialized memory.
      
      More critical, nfsd4_decode_write is failing to increment argp->pagelen
      when it increments argp->pagelist.  This can cause later xdr decoders
      to assume more data is available than really is, which can cause server
      crashes on malformed requests.
      Signed-off-by: default avatarChuck Lever <chuck.lever@oracle.com>
      Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      87ac57ff
    • Ronnie Sahlberg's avatar
      cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup() · e6066962
      Ronnie Sahlberg authored
      commit d3edede2 upstream.
      
      Add checking for the path component length and verify it is <= the maximum
      that the server advertizes via FileFsAttributeInformation.
      
      With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT
      when users to access an overlong path.
      
      To test this, try to cd into a (non-existing) directory on a CIFS share
      that has a too long name:
      cd /mnt/aaaaaaaaaaaaaaa...
      
      and it now should show a good error message from the shell:
      bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long
      
      rh bz 1153996
      Signed-off-by: default avatarRonnie Sahlberg <lsahlber@redhat.com>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e6066962
    • Sachin Prabhu's avatar
      cifs: Fix df output for users with quota limits · 210b41b4
      Sachin Prabhu authored
      commit 42bec214 upstream.
      
      The df for a SMB2 share triggers a GetInfo call for
      FS_FULL_SIZE_INFORMATION. The values returned are used to populate
      struct statfs.
      
      The problem is that none of the information returned by the call
      contains the total blocks available on the filesystem. Instead we use
      the blocks available to the user ie. quota limitation when filling out
      statfs.f_blocks. The information returned does contain Actual free units
      on the filesystem and is used to populate statfs.f_bfree. For users with
      quota enabled, it can lead to situations where the total free space
      reported is more than the total blocks on the system ending up with df
      reports like the following
      
       # df -h /mnt/a
      Filesystem         Size  Used Avail Use% Mounted on
      //192.168.22.10/a  2.5G -2.3G  2.5G    - /mnt/a
      
      To fix this problem, we instead populate both statfs.f_bfree with the
      same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This
      is similar to what is done already in the code for cifs and df now
      reports the quota information for the user used to mount the share.
      
       # df --si /mnt/a
      Filesystem         Size  Used Avail Use% Mounted on
      //192.168.22.10/a  2.7G  101M  2.6G   4% /mnt/a
      Signed-off-by: default avatarSachin Prabhu <sprabhu@redhat.com>
      Signed-off-by: default avatarPierguido Lambri <plambri@redhat.com>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      210b41b4
    • Steven Rostedt (VMware)'s avatar
      tracing: Fix freeing of filter in create_filter() when set_str is false · 9f57741b
      Steven Rostedt (VMware) authored
      commit 8b0db1a5 upstream.
      
      Performing the following task with kmemleak enabled:
      
       # cd /sys/kernel/tracing/events/irq/irq_handler_entry/
       # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
       # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
       # echo scan > /sys/kernel/debug/kmemleak
       # cat /sys/kernel/debug/kmemleak
      unreferenced object 0xffff8800b9290308 (size 32):
        comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
        hex dump (first 32 bytes):
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
        backtrace:
          [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
          [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
          [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
          [<ffffffff812639c9>] create_filter+0xa9/0x160
          [<ffffffff81263bdc>] create_event_filter+0xc/0x10
          [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
          [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
          [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
          [<ffffffff8138cf87>] __vfs_write+0xd7/0x380
          [<ffffffff8138f421>] vfs_write+0x101/0x260
          [<ffffffff8139187b>] SyS_write+0xab/0x130
          [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
          [<ffffffffffffffff>] 0xffffffffffffffff
      
      The function create_filter() is passed a 'filterp' pointer that gets
      allocated, and if "set_str" is true, it is up to the caller to free it, even
      on error. The problem is that the pointer is not freed by create_filter()
      when set_str is false. This is a bug, and it is not up to the caller to free
      the filter on error if it doesn't care about the string.
      
      Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
      
      Fixes: 38b78eb8 ("tracing: Factorize filter creation")
      Reported-by: default avatarChunyu Hu <chuhu@redhat.com>
      Tested-by: default avatarChunyu Hu <chuhu@redhat.com>
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9f57741b
    • Koji Matsuoka's avatar
      drm: rcar-du: Fix H/V sync signal polarity configuration · 0d2b7767
      Koji Matsuoka authored
      commit fd1adef3 upstream.
      
      The VSL and HSL bits in the DSMR register set the corresponding
      horizontal and vertical sync signal polarity to active high. The code
      got it the wrong way around, fix it.
      Signed-off-by: default avatarKoji Matsuoka <koji.matsuoka.xm@renesas.com>
      Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0d2b7767
    • Koji Matsuoka's avatar
      drm: rcar-du: Fix display timing controller parameter · 64f3c534
      Koji Matsuoka authored
      commit 9cdced8a upstream.
      
      There is a bug in the setting of the DES (Display Enable Signal)
      register. This current setting occurs 1 dot left shift. The DES
      register should be set minus one value about the specifying value
      with H/W specification. This patch corrects it.
      Signed-off-by: default avatarKoji Matsuoka <koji.matsuoka.xm@renesas.com>
      Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      64f3c534
    • Laurent Pinchart's avatar
      drm: rcar-du: Fix crash in encoder failure error path · fbf58391
      Laurent Pinchart authored
      commit 05ee29e9 upstream.
      
      When an encoder fails to initialize the driver prints an error message
      to the kernel log. The message contains the name of the encoder's DT
      node, which is NULL for internal encoders. Use the of_node_full_name()
      macro to avoid dereferencing a NULL pointer, print the output number to
      add more context to the error, and make sure we still own a reference to
      the encoder's DT node by delaying the of_node_put() call.
      Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
      Reviewed-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fbf58391
    • Laurent Pinchart's avatar
      drm: rcar-du: lvds: Rename PLLEN bit to PLLON · 766a097c
      Laurent Pinchart authored
      commit 82e7c5e4 upstream.
      
      The bit is named PLLON in the datasheet, rename it.
      Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      766a097c
    • Laurent Pinchart's avatar
      drm: rcar-du: lvds: Fix PLL frequency-related configuration · 2b60c153
      Laurent Pinchart authored
      commit 5e1ac3bd upstream.
      
      The frequency checks don't match the datasheet, fix them.
      Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
      Signed-off-by: default avatarThong Ho <thong.ho.px@rvc.renesas.com>
      Signed-off-by: default avatarNhan Nguyen <nhan.nguyen.yb@renesas.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2b60c153
    • Maarten Lankhorst's avatar
      drm/atomic: If the atomic check fails, return its value first · 3416ee45
      Maarten Lankhorst authored
      commit a0ffc51e upstream.
      
      The last part of drm_atomic_check_only is testing whether we need to
      fail with -EINVAL when modeset is not allowed, but forgets to return
      the value when atomic_check() fails first.
      
      This results in -EDEADLK being replaced by -EINVAL, and the sanity
      check in drm_modeset_drop_locks kicks in:
      
      [  308.531734] ------------[ cut here ]------------
      [  308.531791] WARNING: CPU: 0 PID: 1886 at drivers/gpu/drm/drm_modeset_lock.c:217 drm_modeset_drop_locks+0x33/0xc0 [drm]
      [  308.531828] Modules linked in:
      [  308.532050] CPU: 0 PID: 1886 Comm: kms_atomic Tainted: G     U  W 4.13.0-rc5-patser+ #5225
      [  308.532082] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
      [  308.532124] task: ffff8800cd9dae00 task.stack: ffff8800ca3b8000
      [  308.532168] RIP: 0010:drm_modeset_drop_locks+0x33/0xc0 [drm]
      [  308.532189] RSP: 0018:ffff8800ca3bf980 EFLAGS: 00010282
      [  308.532211] RAX: dffffc0000000000 RBX: ffff8800ca3bfaf8 RCX: 0000000013a171e6
      [  308.532235] RDX: 1ffff10019477f69 RSI: ffffffffa8ba4fa0 RDI: ffff8800ca3bfb48
      [  308.532258] RBP: ffff8800ca3bf998 R08: 0000000000000000 R09: 0000000000000003
      [  308.532281] R10: 0000000079dbe066 R11: 00000000f760b34b R12: 0000000000000001
      [  308.532304] R13: dffffc0000000000 R14: 00000000ffffffea R15: ffff880096889680
      [  308.532328] FS:  00007ff00959cec0(0000) GS:ffff8800d4e00000(0000) knlGS:0000000000000000
      [  308.532359] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  308.532380] CR2: 0000000000000008 CR3: 00000000ca2e3000 CR4: 00000000003406f0
      [  308.532402] Call Trace:
      [  308.532440]  drm_mode_atomic_ioctl+0x19fa/0x1c00 [drm]
      [  308.532488]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
      [  308.532565]  ? avc_has_extended_perms+0xc39/0xff0
      [  308.532593]  ? lock_downgrade+0x610/0x610
      [  308.532640]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
      [  308.532680]  drm_ioctl_kernel+0x154/0x1a0 [drm]
      [  308.532755]  drm_ioctl+0x624/0x8f0 [drm]
      [  308.532858]  ? drm_atomic_set_property+0x1220/0x1220 [drm]
      [  308.532976]  ? drm_getunique+0x210/0x210 [drm]
      [  308.533061]  do_vfs_ioctl+0xd92/0xe40
      [  308.533121]  ? ioctl_preallocate+0x1b0/0x1b0
      [  308.533160]  ? selinux_capable+0x20/0x20
      [  308.533191]  ? do_fcntl+0x1b1/0xbf0
      [  308.533219]  ? kasan_slab_free+0xa2/0xb0
      [  308.533249]  ? f_getown+0x4b/0xa0
      [  308.533278]  ? putname+0xcf/0xe0
      [  308.533309]  ? security_file_ioctl+0x57/0x90
      [  308.533342]  SyS_ioctl+0x4e/0x80
      [  308.533374]  entry_SYSCALL_64_fastpath+0x18/0xad
      [  308.533405] RIP: 0033:0x7ff00779e4d7
      [  308.533431] RSP: 002b:00007fff66a043d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
      [  308.533481] RAX: ffffffffffffffda RBX: 000000e7c7ca5910 RCX: 00007ff00779e4d7
      [  308.533560] RDX: 00007fff66a04430 RSI: 00000000c03864bc RDI: 0000000000000003
      [  308.533608] RBP: 00007ff007a5fb00 R08: 000000e7c7ca4620 R09: 000000e7c7ca5e60
      [  308.533647] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000070
      [  308.533685] R13: 0000000000000000 R14: 0000000000000000 R15: 000000e7c7ca5930
      [  308.533770] Code: ff df 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 c7
      50 48 89 fa 48 c1 ea 03 80 3c 02 00 74 05 e8 94 d4 16 e7 48 83 7b 50 00
      74 02 <0f> ff 4c 8d 6b 58 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1
      [  308.534086] ---[ end trace 77f11e53b1df44ad ]---
      
      Solve this by adding the missing return.
      
      This is also a bugfix because we could end up rejecting updates with
      -EINVAL because of a early -EDEADLK, while if atomic_check ran to
      completion it might have downgraded the modeset to a fastset.
      Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Testcase: kms_atomic
      Link: https://patchwork.freedesktop.org/patch/msgid/20170815095706.23624-1-maarten.lankhorst@linux.intel.com
      Fixes: d34f20d6 ("drm: Atomic modeset ioctl")
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3416ee45
    • Chris Wilson's avatar
      drm: Release driver tracking before making the object available again · 2a9d7664
      Chris Wilson authored
      commit fe4600a5 upstream.
      
      This is the same bug as we fixed in commit f6cd7dae ("drm: Release
      driver references to handle before making it available again"), but now
      the exposure is via the PRIME lookup tables. If we remove the
      object/handle from the PRIME lut, then a new request for the same
      object/fd will generate a new handle, thus for a short window that
      object is known to userspace by two different handles. Fix this by
      releasing the driver tracking before PRIME.
      
      Fixes: 0ff926c7 ("drm/prime: add exported buffers to current fprivs
      imported buffer list (v2)")
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: David Airlie <airlied@linux.ie>
      Cc: Daniel Vetter <daniel.vetter@intel.com>
      Cc: Rob Clark <robdclark@gmail.com>
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Cc: Thierry Reding <treding@nvidia.com>
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Signed-off-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.ukSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a9d7664
    • Ulf Hansson's avatar
      i2c: designware: Fix system suspend · 33e4c637
      Ulf Hansson authored
      commit a23318fe upstream.
      
      The commit 8503ff16 ("i2c: designware: Avoid unnecessary resuming
      during system suspend"), may suggest to the PM core to try out the so
      called direct_complete path for system sleep. In this path, the PM core
      treats a runtime suspended device as it's already in a proper low power
      state for system sleep, which makes it skip calling the system sleep
      callbacks for the device, except for the ->prepare() and the ->complete()
      callbacks.
      
      However, the PM core may unset the direct_complete flag for a parent
      device, in case its child device are being system suspended before. In this
      scenario, the PM core invokes the system sleep callbacks, no matter if the
      device is runtime suspended or not.
      
      Particularly in cases of an existing i2c slave device, the above path is
      triggered, which breaks the assumption that the i2c device is always
      runtime resumed whenever the dw_i2c_plat_suspend() is being called.
      
      More precisely, dw_i2c_plat_suspend() calls clk_core_disable() and
      clk_core_unprepare(), for an already disabled/unprepared clock, leading to
      a splat in the log about clocks calls being wrongly balanced and breaking
      system sleep.
      
      To still allow the direct_complete path in cases when it's possible, but
      also to keep the fix simple, let's runtime resume the i2c device in the
      ->suspend() callback, before continuing to put the device into low power
      state.
      
      Note, in cases when the i2c device is attached to the ACPI PM domain, this
      problem doesn't occur, because ACPI's ->suspend() callback, assigned to
      acpi_subsys_suspend(), already calls pm_runtime_resume() for the device.
      
      It should also be noted that this change does not fix commit 8503ff16
      ("i2c: designware: Avoid unnecessary resuming during system suspend").
      Because for the non-ACPI case, the system sleep support was already broken
      prior that point.
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Acked-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Tested-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      33e4c637
    • Alexey Brodkin's avatar
      ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses · 10814c14
      Alexey Brodkin authored
      commit 7d79cee2 upstream.
      
      It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1
      which hold MSB bits of the physical address correspondingly of region start
      and end otherwise SLC region operation is executed in unpredictable manner
      
      Without this patch, SLC flushes on HSDK (IOC disabled) were taking
      seconds.
      Reported-by: default avatarVladimir Kondratiev <vladimir.kondratiev@intel.com>
      Signed-off-by: default avatarAlexey Brodkin <abrodkin@synopsys.com>
      Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
      [vgupta: PAR40 regs only written if PAE40 exist]
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      10814c14
    • Takashi Iwai's avatar
      ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978) · 6b1c81dd
      Takashi Iwai authored
      commit bbba6f9d upstream.
      
      Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
      similar workaround for the inverted stereo dmic like other Lenovo
      models.
      
      Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6b1c81dd
    • Takashi Iwai's avatar
      ALSA: core: Fix unexpected error at replacing user TLV · 099e57fc
      Takashi Iwai authored
      commit 88c54cdf upstream.
      
      When user tries to replace the user-defined control TLV, the kernel
      checks the change of its content via memcmp().  The problem is that
      the kernel passes the return value from memcmp() as is.  memcmp()
      gives a non-zero negative value depending on the comparison result,
      and this shall be recognized as an error code.
      
      The patch covers that corner-case, return 1 properly for the changed
      TLV.
      
      Fixes: 8aa9b586 ("[ALSA] Control API - more robust TLV implementation")
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      099e57fc
    • KT Liao's avatar
      Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310 · 07051c17
      KT Liao authored
      commit 1d2226e4 upstream.
      
      Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN
      touchpads found in Lenovo Yoga310.
      Signed-off-by: default avatarKT Liao <kt.liao@emc.com.tw>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      07051c17
    • Aaron Ma's avatar
      Input: trackpoint - add new trackpoint firmware ID · 5609ae96
      Aaron Ma authored
      commit ec667683 upstream.
      
      Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits
      are indicated as TP. Change the constant to bitwise values.
      
      This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead
      of it being identified as "PS/2 Generic Mouse".
      Signed-off-by: default avatarAaron Ma <aaron.ma@canonical.com>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5609ae96
    • Tomas Winkler's avatar
      mei: me: add lewisburg device ids · a56800ae
      Tomas Winkler authored
      commit 9ff2007b upstream.
      
      Add MEI Lewisburg PCH IDs for Purley based workstations.
      Signed-off-by: default avatarAlexander Usyskin <alexander.usyskin@intel.com>
      Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a56800ae
    • Tomas Winkler's avatar
      mei: me: add broxton pci device ids · 707352e6
      Tomas Winkler authored
      commit dd16f6cd upstream.
      
      Add device ids for Broxton SoC based devices.
      Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      707352e6
    • Konstantin Khlebnikov's avatar
      net_sched: fix order of queue length updates in qdisc_replace() · 58079f56
      Konstantin Khlebnikov authored
      
      [ Upstream commit 68a66d14 ]
      
      This important to call qdisc_tree_reduce_backlog() after changing queue
      length. Parent qdisc should deactivate class in ->qlen_notify() called from
      qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.
      
      Missed class deactivations leads to crashes/warnings at picking packets
      from empty qdisc and corrupting state at reactivating this class in future.
      Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
      Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper")
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      58079f56
    • Xin Long's avatar
      net: sched: fix NULL pointer dereference when action calls some targets · 248af6aa
      Xin Long authored
      
      [ Upstream commit 4f8a881a ]
      
      As we know in some target's checkentry it may dereference par.entryinfo
      to check entry stuff inside. But when sched action calls xt_check_target,
      par.entryinfo is set with NULL. It would cause kernel panic when calling
      some targets.
      
      It can be reproduce with:
        # tc qd add dev eth1 ingress handle ffff:
        # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \
          -j ECN --ecn-tcp-remove
      
      It could also crash kernel when using target CLUSTERIP or TPROXY.
      
      By now there's no proper value for par.entryinfo in ipt_init_target,
      but it can not be set with NULL. This patch is to void all these
      panics by setting it with an ipt_entry obj with all members = 0.
      
      Note that this issue has been there since the very beginning.
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      248af6aa
    • Colin Ian King's avatar
      irda: do not leak initialized list.dev to userspace · eece6c91
      Colin Ian King authored
      
      [ Upstream commit b024d949 ]
      
      list.dev has not been initialized and so the copy_to_user is copying
      data from the stack back to user space which is a potential
      information leak. Fix this ensuring all of list is initialized to
      zero.
      
      Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eece6c91
    • Neal Cardwell's avatar
      tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP · 4e39b740
      Neal Cardwell authored
      
      [ Upstream commit cdbeb633 ]
      
      In some situations tcp_send_loss_probe() can realize that it's unable
      to send a loss probe (TLP), and falls back to calling tcp_rearm_rto()
      to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto()
      realizes that the RTO was eligible to fire immediately or at some
      point in the past (delta_us <= 0). Previously in such cases
      tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now +
      icsk_rto, which caused needless delays of hundreds of milliseconds
      (and non-linear behavior that made reproducible testing
      difficult). This commit changes the logic to schedule "overdue" RTOs
      ASAP, rather than at now + icsk_rto.
      
      Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)")
      Suggested-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4e39b740
    • Wei Wang's avatar
      ipv6: repair fib6 tree in failure case · ece3ff17
      Wei Wang authored
      
      [ Upstream commit 348a4002 ]
      
      In fib6_add(), it is possible that fib6_add_1() picks an intermediate
      node and sets the node's fn->leaf to NULL in order to add this new
      route. However, if fib6_add_rt2node() fails to add the new
      route for some reason, fn->leaf will be left as NULL and could
      potentially cause crash when fn->leaf is accessed in fib6_locate().
      This patch makes sure fib6_repair_tree() is called to properly repair
      fn->leaf in the above failure case.
      
      Here is the syzkaller reported general protection fault in fib6_locate:
      kasan: CONFIG_KASAN_INLINE enabled
      kasan: GPF could be caused by NULL-ptr deref or user memory access
      general protection fault: 0000 [#1] SMP KASAN
      Modules linked in:
      CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
      RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
      RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
      RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
      RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
      RSP: 0018:ffff8801d01a36a8  EFLAGS: 00010202
      RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
      RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
      RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
      R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
      R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
      FS:  00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Stack:
       ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
       ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
       ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
      Call Trace:
       [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
       [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
       [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
       [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
       [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
       [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
       [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
       [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
       [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
       [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
       [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
       [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
       [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
       [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
       [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
       [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
       [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17
      
      Note: there is no "Fixes" tag as this seems to be a bug introduced
      very early.
      Signed-off-by: default avatarWei Wang <weiwan@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ece3ff17
    • Wei Wang's avatar
      ipv6: reset fn->rr_ptr when replacing route · 6415a71d
      Wei Wang authored
      
      [ Upstream commit 383143f3 ]
      
      syzcaller reported the following use-after-free issue in rt6_select():
      BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8
      BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8
      Read of size 4 by task syz-executor1/439628
      CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
       0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00
       ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0
       ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380
      Call Trace:
       [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline]
       [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
      sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option.
      Use struct sctp_sack_info instead
       [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
       [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline]
       [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285
       [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline]
       [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325
       [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline]
       [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084
       [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203
       [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95
       [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223
       [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41
       [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224
       [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943
       [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079
       [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91
       [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline]
       [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272
       [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284
       [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564
       [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582
       [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563
       [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17
      Object at ffff8800bc699380, in cache ip6_dst_cache size: 384
      
      The root cause of it is that in fib6_add_rt2node(), when it replaces an
      existing route with the new one, it does not update fn->rr_ptr.
      This commit resets fn->rr_ptr to NULL when it points to a route which is
      replaced in fib6_add_rt2node().
      
      Fixes: 27596472 ("ipv6: fix ECMP route replacement")
      Signed-off-by: default avatarWei Wang <weiwan@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6415a71d
    • Eric Dumazet's avatar
      tipc: fix use-after-free · 69827c39
      Eric Dumazet authored
      
      [ Upstream commit 5bfd37b4 ]
      
      syszkaller reported use-after-free in tipc [1]
      
      When msg->rep skb is freed, set the pointer to NULL,
      so that caller does not free it again.
      
      [1]
      
      ==================================================================
      BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466
      Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115
      
      CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:16 [inline]
       dump_stack+0x194/0x257 lib/dump_stack.c:52
       print_address_description+0x73/0x250 mm/kasan/report.c:252
       kasan_report_error mm/kasan/report.c:351 [inline]
       kasan_report+0x24e/0x340 mm/kasan/report.c:409
       __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
       skb_push+0xd4/0xe0 net/core/skbuff.c:1466
       tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209
       genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
       genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
       netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
       genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
       netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
       netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
       netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       sock_write_iter+0x31a/0x5d0 net/socket.c:898
       call_write_iter include/linux/fs.h:1743 [inline]
       new_sync_write fs/read_write.c:457 [inline]
       __vfs_write+0x684/0x970 fs/read_write.c:470
       vfs_write+0x189/0x510 fs/read_write.c:518
       SYSC_write fs/read_write.c:565 [inline]
       SyS_write+0xef/0x220 fs/read_write.c:557
       entry_SYSCALL_64_fastpath+0x1f/0xbe
      RIP: 0033:0x4512e9
      RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001
      RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9
      RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006
      RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76
      R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000
      
      Allocated by task 4115:
       save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
       save_stack+0x43/0xd0 mm/kasan/kasan.c:447
       set_track mm/kasan/kasan.c:459 [inline]
       kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
       kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
       kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651
       __alloc_skb+0xf1/0x740 net/core/skbuff.c:219
       alloc_skb include/linux/skbuff.h:903 [inline]
       tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148
       tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248
       tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
       tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
       genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
       genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
       netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
       genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
       netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
       netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
       netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       sock_write_iter+0x31a/0x5d0 net/socket.c:898
       call_write_iter include/linux/fs.h:1743 [inline]
       new_sync_write fs/read_write.c:457 [inline]
       __vfs_write+0x684/0x970 fs/read_write.c:470
       vfs_write+0x189/0x510 fs/read_write.c:518
       SYSC_write fs/read_write.c:565 [inline]
       SyS_write+0xef/0x220 fs/read_write.c:557
       entry_SYSCALL_64_fastpath+0x1f/0xbe
      
      Freed by task 4115:
       save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
       save_stack+0x43/0xd0 mm/kasan/kasan.c:447
       set_track mm/kasan/kasan.c:459 [inline]
       kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
       __cache_free mm/slab.c:3503 [inline]
       kmem_cache_free+0x77/0x280 mm/slab.c:3763
       kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622
       __kfree_skb net/core/skbuff.c:682 [inline]
       kfree_skb+0x165/0x4c0 net/core/skbuff.c:699
       tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260
       tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
       tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
       genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
       genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
       netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
       genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
       netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
       netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
       netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       sock_write_iter+0x31a/0x5d0 net/socket.c:898
       call_write_iter include/linux/fs.h:1743 [inline]
       new_sync_write fs/read_write.c:457 [inline]
       __vfs_write+0x684/0x970 fs/read_write.c:470
       vfs_write+0x189/0x510 fs/read_write.c:518
       SYSC_write fs/read_write.c:565 [inline]
       SyS_write+0xef/0x220 fs/read_write.c:557
       entry_SYSCALL_64_fastpath+0x1f/0xbe
      
      The buggy address belongs to the object at ffff8801c6e71dc0
       which belongs to the cache skbuff_head_cache of size 224
      The buggy address is located 208 bytes inside of
       224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0)
      The buggy address belongs to the page:
      page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0
      flags: 0x200000000000100(slab)
      raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c
      raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
       ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
                               ^
       ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      ==================================================================
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarDmitry Vyukov  <dvyukov@google.com>
      Cc: Jon Maloy <jon.maloy@ericsson.com>
      Cc: Ying Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      69827c39
    • Alexander Potapenko's avatar
      sctp: fully initialize the IPv6 address in sctp_v6_to_addr() · 0e8d6286
      Alexander Potapenko authored
      
      [ Upstream commit 15339e44 ]
      
      KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and
      sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below).
      Make sure all fields of an IPv6 address are initialized, which
      guarantees that the IPv4 fields are also initialized.
      
      ==================================================================
       BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
       net/sctp/ipv6.c:517
       CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
       Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
       01/01/2011
       Call Trace:
        dump_stack+0x172/0x1c0 lib/dump_stack.c:42
        is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
        kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
        native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
        arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
        arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
        __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
        sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
        sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
        sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
        sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
        sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
        inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
        sock_sendmsg_nosec net/socket.c:633 [inline]
        sock_sendmsg net/socket.c:643 [inline]
        SYSC_sendto+0x608/0x710 net/socket.c:1696
        SyS_sendto+0x8a/0xb0 net/socket.c:1664
        entry_SYSCALL_64_fastpath+0x13/0x94
       RIP: 0033:0x44b479
       RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
       RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
       RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
       RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
       R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
       R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
       origin description: ----dst_saddr@sctp_v6_get_dst
       local variable created at:
        sk_fullsock include/net/sock.h:2321 [inline]
        inet6_sk include/linux/ipv6.h:309 [inline]
        sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
        sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
      ==================================================================
       BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
       net/sctp/ipv6.c:517
       CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
       Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
       01/01/2011
       Call Trace:
        dump_stack+0x172/0x1c0 lib/dump_stack.c:42
        is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
        kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
        native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
        arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
        arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
        __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
        sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
        sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
        sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
        sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
        sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
        inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
        sock_sendmsg_nosec net/socket.c:633 [inline]
        sock_sendmsg net/socket.c:643 [inline]
        SYSC_sendto+0x608/0x710 net/socket.c:1696
        SyS_sendto+0x8a/0xb0 net/socket.c:1664
        entry_SYSCALL_64_fastpath+0x13/0x94
       RIP: 0033:0x44b479
       RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
       RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
       RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
       RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
       R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
       R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
       origin description: ----dst_saddr@sctp_v6_get_dst
       local variable created at:
        sk_fullsock include/net/sock.h:2321 [inline]
        inet6_sk include/linux/ipv6.h:309 [inline]
        sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
        sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
      ==================================================================
      Signed-off-by: default avatarAlexander Potapenko <glider@google.com>
      Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0e8d6286
    • Eric Dumazet's avatar
      ipv4: better IP_MAX_MTU enforcement · 1bd54371
      Eric Dumazet authored
      
      [ Upstream commit c780a049 ]
      
      While working on yet another syzkaller report, I found
      that our IP_MAX_MTU enforcements were not properly done.
      
      gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and
      final result can be bigger than IP_MAX_MTU :/
      
      This is a problem because device mtu can be changed on other cpus or
      threads.
      
      While this patch does not fix the issue I am working on, it is
      probably worth addressing it.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1bd54371
    • Konstantin Khlebnikov's avatar
      net_sched/sfq: update hierarchical backlog when drop packet · 7e1fe006
      Konstantin Khlebnikov authored
      
      [ Upstream commit 325d5dc3 ]
      
      When sfq_enqueue() drops head packet or packet from another queue it
      have to update backlog at upper qdiscs too.
      
      Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too")
      Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7e1fe006