- 18 Jun, 2021 16 commits
-
-
Michal Wajdeczko authored
GuC ABI documentation is now ready to be included in i915.rst Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616001302.84233-4-matthew.brost@intel.com
-
Michal Wajdeczko authored
Most of the changes to the 62.0.0 firmware revolved around CTB communication channel. Conform to the new (stable) CTB protocol. v2: (Michal) Add values back to kernel DOC for actions (Docs) Add 'CT buffer' back in to fix warning Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> [mattrope: Tweaked kerneldoc while pushing as suggested by Daniele/Michal] Signed-off-by:
-
Michal Wajdeczko authored
New GuC firmware will unify format of MMIO and CTB H2G messages. Introduce their definitions now to allow gradual transition of our code to match new changes. Signed-off-by:
-
Matthew Brost authored
The submission tasklet operates on i915_sched_engine, thus it is the correct place for it. v3: (Jason Ekstrand) Change sched_engine->engine to a void* private data pointer Add kernel doc v4: (Daniele) Update private_data comment Set queue_priority_hint in kick_execlists v5: (CI) Rebase and fix build error Signed-off-by:
-
Matthew Brost authored
Rather passing around an intel_engine_cs in the scheduling code, pass around a i915_sched_engine. v3: (Jason Ekstrand) Add READ_ONCE around rq->engine in lock_sched_engine Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Signed-off-by:
-
Matthew Brost authored
Not all back-ends require a kick after a scheduling update, so make the kick a call-back function that the back-end can opt-in to. Also move the current kick function from the scheduler to the execlists file as it is specific to that back-end. Signed-off-by:
-
Matthew Brost authored
The schedule function should be in the schedule object. v3: (Jason Ekstrand) Add kernel doc Signed-off-by:
-
Matthew Brost authored
Move active request tracking and its lock to i915_sched_engine. This lock is also the submission lock so having it in the i915_sched_engine is the correct place. v3: (Jason Ekstrand) Add kernel doc v6: Rebase Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.comk> Signed-off-by:
-
Matthew Brost authored
Rather than touching schedule state in the generic PM code, reset the priolist allocation when empty in the submission code. Add a wrapper function to do this and update the backends to call it in the correct place. v3: (Jason Ekstrand) Update patch commit message with a better description Signed-off-by:
-
Matthew Brost authored
Add wrapper function around RB tree to determine if i915_sched_engine is empty. Signed-off-by:
-
Matthew Brost authored
Introduce i915_sched_engine object which is lower level data structure that i915_scheduler / generic code can operate on without touching execlist specific structures. This allows additional submission backends to be added without breaking the layering. Currently the execlists backend uses 1 of these object per each engine (physical or virtual) but future backends like the GuC will point to less instances utilizing the reference counting. This is a bit of detour to integrating the i915 with the DRM scheduler but this object will still exist when the DRM scheduler lands in the i915. It will however look a bit different. It will encapsulate the drm_gpu_scheduler object plus and common variables (to the backends) related to scheduling. Regardless this is a step in the right direction. This patch starts the aforementioned transition by moving the priolist into the i915_sched_engine object. v3: (Jason Ekstrand) Update comment next to intel_engine_cs.virtual Add kernel doc (Checkpatch) Fix double the in commit message v4: (Daniele) Update comment message. Add comment about subclass field Signed-off-by:
-
Matthew Auld authored
When we resurrected the selftest we forgot to add back the selftest() hook, meaning the test is not currently run. References: d1487389 ("drm/i915/ttm Initialize the ttm device and memory managers") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210618133150.700375-1-matthew.auld@intel.com
-
Thomas Hellström authored
We have assumed that if the current placement was not the requested placement, but instead one of the busy placements, a TTM move would have been triggered. That is not the case. So when we initially place LMEM objects in "Limbo", (that is system placement without any pages allocated), to be able to defer clearing objects until first get_pages(), the first get_pages() would happily keep objects in system memory if that is one of the allowed placements. And since we don't yet support i915 GEM system memory from TTM, everything breaks apart. So make sure we try the requested placement first, if no eviction is needed. If that fails, retry with all allowed placements also allowing evictions. Also make sure we handle TTM failure codes correctly. Also temporarily (until we support i915 GEM system on TTM), restrict allowed placements to the requested placement to avoid things falling apart should LMEM be full. Fixes: 38f28c06 ("drm/i915/ttm: Calculate the object placement at get_pages time") Signed-off-by:
-
Matt Roper authored
Because Render Power Gating restricts us to just a single subslice as a valid steering target for reads of multicast registers in a SUBSLICE range, the default steering we setup at init may not lead to a suitable target for L3BANK multicast register. In cases where it does not, use explicit runtime steering whenever an L3BANK multicast register is read. While we're at it, let's simplify the function a little bit and drop its support for gen10/CNL since no such platforms ever materialized for real use. Multicast register steering is already an area that causes enough confusion; no need to complicate it with what's effectively dead code. v2: - Use gt->uncore instead of gt->i915->uncore. (Tvrtko) - Use {} as table terminator. (Rodrigo) v3: - L3bank fuse register is a disable mask rather than an enable mask. We need to invert it before use. (CI) v4: - L3bank ID goes in the subslice field, not the slice field. (CI) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-4-matthew.d.roper@intel.com
-
Matt Roper authored
Although most of our multicast registers are replicated per-subslice, we also have a small number of multicast registers that are replicated per-l3 bank instead. For both types of multicast registers we need to make sure we steer reads of these registers to a valid instance. Ideally we'd like to find a specific instance ID that would steer reads of either type of multicast register to a valid instance (i.e., not fused off and not powered down), but sometimes the combination of part-specific fusing and the additional restrictions imposed by Render Power Gating make it impossible to find any overlap between the set of valid subslices and valid l3 banks. This problem will become even more noticeable on our upcoming platforms since they will be adding additional types of multicast registers with new types of replication and rules for finding valid instances for reads. To handle this we'll continue to pick a suitable subslice instance at driver startup and program this as the default (sliceid,subsliceid) setting in the steering control register (0xFDC). In cases where we need to read another type of multicast GT register, but the default subslice steering would not correspond to a valid instance, we'll explicitly re-steer the single read to a valid value, perform the read, and then reset the steering to it's "subslice" default. This patch adds the general functionality to prepare for this explicit steering of other multicast register types. We'll plug L3 bank steering into this in the next patch, and then add additional types of multicast registers when the support for our next upcoming platform arrives. v2: - Use entry->end==0 as table terminator. (Rodrigo) - Grab forcewake in wa_list_verify() now that we're using accessors that assume forcewake is already held. v3: - Fix loop condition when iterating over steering range tables. (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
New steering cases will be added in the follow-up patches, so prepare a common helper to avoid code duplication. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 17 Jun, 2021 16 commits
-
-
Wan Jiabing authored
Fix the following checkinclude.pl warning: drivers/gpu/drm/i915/gt/intel_region_lmem.c 8 #include "intel_region_lmem.h" 12 #include "intel_region_lmem.h" Signed-off-by:Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210615113522.6867-1-wanjiabing@vivo.com
-
Thomas Hellström authored
To help avoid evicting already resident buffers from the batch we're processing, perform locking as a separate step. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Thomas Hellström authored
It's unused with the exception of selftest. Replace a call in the memory_region live selftest with a call into a corresponding function in the new migrate code. Signed-off-by:
-
Thomas Hellström authored
It's not used anywhere. Signed-off-by:
-
Ramalingam C authored
Invokes the pipelined page migration through blt, for i915_ttm_move requests of eviction and also obj clear. Signed-off-by:
-
Chris Wilson authored
Set up a default migration context on the GT and use it from the selftests. Add a perf selftest and make sure we exercise LMEM if available. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Co-developed-by:
-
Chris Wilson authored
Update the PTE and emit a clear within a single unpreemptible packet such that we can schedule and pipeline clears. Signed-off-by:
-
Chris Wilson authored
If we pipeline the PTE updates and then do the copy of those pages within a single unpreemptible command packet, we can submit the copies and leave them to be scheduled without having to synchronously wait under a global lock. In order to manage migration, we need to preallocate the page tables (and keep them pinned and available for use at any time), causing a bottleneck for migrations as all clients must contend on the limited resources. By inlining the ppGTT updates and performing the blit atomically, each client only owns the PTE while in use, and so we can reschedule individual operations however we see fit. And most importantly, we do not need to take a global lock on the shared vm, and wait until the operation is complete before releasing the lock for others to claim the PTE for themselves. Signed-off-by:
-
Chris Wilson authored
Allow internal clients to create and destroy a pinned context. Signed-off-by:
-
Chris Wilson authored
In the next patch, we will want to look at the dma addresses of individual page tables, so add a routine to iterate over them. Signed-off-by:
-
Chris Wilson authored
In the next patch, we will want to write a PTE for an explicit dma address, outside of the usual vma. Signed-off-by:
-
Thomas Hellström authored
Introduce a for_i915_gem_ww(){} utility to help make the code around a ww transaction more readable. Signed-off-by: -
Thomas Hellström authored
As we're about to add more ww-related functionality, break out the dma_resv ww locking utilities to their own files Signed-off-by:
-
Thomas Hellström authored
Since the ww transaction endpoint easily end up far out-of-scope of the objects on the ww object list, particularly for contending lock objects, make sure we reference objects on the list so they don't disappear under us. This comes with a performance penalty so it's been debated whether this is really needed. But I think this is motivated by the fact that locking is typically difficult to get right, and whatever we can do to make it simpler for developers moving forward should be done, unless the performance impact is far too high. Signed-off-by:
-
Matthew Auld authored
intel_region_ttm_node_free is no longer used. Also fixup the related kerneldoc. Reported-by:
-
Daniel Vetter authored
Between commit ae30af84 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Mar 23 16:50:00 2021 +0100 drm/i915: Disable userptr pread/pwrite support. and commit 0049b688 Author: Matthew Auld <matthew.auld@intel.com> Date: Thu Nov 5 15:49:33 2020 +0000 drm/i915/gem: Allow backends to override pread implementation this accidentally landed twice. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616090350.828696-1-daniel.vetter@ffwll.ch
-
- 16 Jun, 2021 8 commits
-
-
Matthew Auld authored
We now have bo->page_alignment which perfectly describes what we need if we have min page size restrictions for lmem. We can also drop the flag here, since this is the default behaviour for all objects. v2(Thomas): - bo->page_alignment is in page units Signed-off-by: -
Matthew Auld authored
Move back to the buddy allocator for managing device local memory, and restore the lost mock selftests. Keep around the range manager related bits, since we likely need this for managing stolen at some point. For stolen we also don't need to reserve anything so no need to support a generic reserve interface. v2(Thomas): - bo->page_alignment is in page units, not bytes Signed-off-by: -
Matthew Auld authored
Now that ttm_resource_manager just returns a generic ttm_resource we don't need to reference the mm_node stuff anymore which mostly only makes sense for drm_mm_node. In the next few patches we want switch over to the ttm_buddy_man which is just another type of ttm_resource so reflect that in the naming. Signed-off-by:
-
Matthew Auld authored
Currently we just ignore the I915_BO_ALLOC_CONTIGUOUS flag, which is fine since everything is already contiguous with the ttm range manager. However in the next patch we want to switch over to the ttm buddy manager, where allocations are by default not contiguous. v2(Thomas): - Forward ALLOC_CONTIG for all regions Signed-off-by: -
Thomas Hellström authored
Instead of relying on a static placement, calculate at get_pages() time. This should work for LMEM regions and system for now. For stolen we need to take preallocated range into account. That will if needed be added later. Signed-off-by:
-
Matthew Auld authored
We need to be able to build an sg table from our list of buddy blocks, so that we can later plug this into our ttm backend, and replace our use of the range manager. Signed-off-by:
-
Matthew Auld authored
Add back our standalone i915_buddy allocator and integrate it into a ttm_resource_manager. This will plug into our ttm backend for managing device local-memory in the next couple of patches. v2(Thomas): - Return -ENOSPC from the buddy; ttm expects this in order to trigger eviction - Drop the unnecessary inline - bo->page_alignment is in page units Signed-off-by: -
Thomas Hellström authored
Fix two memory leaks introduced with the ttm backend. Fixes: 213d5092 ("drm/i915/ttm: Introduce a TTM i915 gem object backend") Signed-off-by:
-
