- 02 May, 2020 6 commits
-
-
Nathan Chancellor authored
commit 09b04abb upstream. When building with Clang + -Wtautological-pointer-compare: drivers/usb/gadget/udc/bdc/bdc_ep.c:543:28: warning: comparison of address of 'req->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~ ~~~~ drivers/usb/gadget/udc/bdc/bdc_ep.c:543:51: warning: comparison of address of 'req->usb_req' equal to a null pointer is always false [-Wtautological-pointer-compare] if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) ~~~~~^~~~~~~ ~~~~ 2 warnings generated. As it notes, these statements will always evaluate to false so remove them. Fixes: efed421a ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Link: https://github.com/ClangBuiltLinux/linux/issues/749Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit d0550cd2 upstream. The controller always supports link recovery for device in SS and SSP. Remove the speed limit check. Also, when the device is in RESUME or RESET state, it means the controller received the resume/reset request. The driver must send the link recovery to acknowledge the request. They are valid states for the driver to send link recovery. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Fixes: ee5cd41c ("usb: dwc3: Update speed checks for SuperSpeedPlus") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Tyler Hicks authored
commit 60d48857 upstream. Restore the behavior of locking mmap_sem for reading in binder_alloc_free_page(), as was first done in commit 3013bf62 ("binder: reduce mmap_sem write-side lock"). That change was inadvertently reverted by commit 5cec2d2e ("binder: fix race between munmap() and direct reclaim"). In addition, change the name of the label for the error path to accurately reflect that we're taking the lock for reading. Backporting note: This fix is only needed when *both* of the commits mentioned above are applied. That's an unlikely situation since they both landed during the development of v5.1 but only one of them is targeted for stable. Fixes: 5cec2d2e ("binder: fix race between munmap() and direct reclaim") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Todd Kjos <tkjos@android.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Christian Borntraeger authored
commit 467d12f5 upstream. QEMU has a funny new build error message when I use the upstream kernel headers: CC block/file-posix.o In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4, from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29, from /home/cborntra/REPOS/qemu/include/block/accounting.h:28, from /home/cborntra/REPOS/qemu/include/block/block_int.h:27, from /home/cborntra/REPOS/qemu/block/file-posix.c:30: /usr/include/linux/swab.h: In function `__swab': /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef] 20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE) | ^~~~~~ /home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "(" 20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE) | ^ cc1: all warnings being treated as errors make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1 rm tests/qemu-iotests/socket_scm_helper.o This was triggered by commit d5767057 ("uapi: rename ext2_swab() to swab() and share globally in swab.h"). That patch is doing #include <asm/bitsperlong.h> but it uses BITS_PER_LONG. The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG. Let us use the __ variant in swap.h Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com Fixes: d5767057 ("uapi: rename ext2_swab() to swab() and share globally in swab.h") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Allison Randal <allison@lohutok.net> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Liu Jian authored
commit d9b8a67b upstream. In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae107("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by:
Yi Huaijie <yihuaijie@huawei.com> Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Clement Leger authored
commit 00a0eec5 upstream. Index of rvring is computed using pointer arithmetic. However, since rvring->rvdev->vring is the base of the vring array, computation of rvring idx should be reversed. It previously lead to writing at negative indices in the resource table. Signed-off-by:
Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20191004073736.8327-1-cleger@kalray.euSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
-
- 29 Apr, 2020 34 commits
-
-
Greg Kroah-Hartman authored
-
Christian Borntraeger authored
commit 316ec154 upstream. A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # 4.15+ Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> References: CVE-2020-11884 Signed-off-by:
-
kaixuxia authored
commit bc56ad8c upstream. When performing rename operation with RENAME_WHITEOUT flag, we will hold AGF lock to allocate or free extents in manipulating the dirents firstly, and then doing the xfs_iunlink_remove() call last to hold AGI lock to modify the tmpfile info, so we the lock order AGI->AGF. The big problem here is that we have an ordering constraint on AGF and AGI locking - inode allocation locks the AGI, then can allocate a new extent for new inodes, locking the AGF after the AGI. Hence the ordering that is imposed by other parts of the code is AGI before AGF. So we get an ABBA deadlock between the AGI and AGF here. Process A: Call trace: ? __schedule+0x2bd/0x620 schedule+0x33/0x90 schedule_timeout+0x17d/0x290 __down_common+0xef/0x125 ? xfs_buf_find+0x215/0x6c0 [xfs] down+0x3b/0x50 xfs_buf_lock+0x34/0xf0 [xfs] xfs_buf_find+0x215/0x6c0 [xfs] xfs_buf_get_map+0x37/0x230 [xfs] xfs_buf_read_map+0x29/0x190 [xfs] xfs_trans_read_buf_map+0x13d/0x520 [xfs] xfs_read_agf+0xa6/0x180 [xfs] ? schedule_timeout+0x17d/0x290 xfs_alloc_read_agf+0x52/0x1f0 [xfs] xfs_alloc_fix_freelist+0x432/0x590 [xfs] ? down+0x3b/0x50 ? xfs_buf_lock+0x34/0xf0 [xfs] ? xfs_buf_find+0x215/0x6c0 [xfs] xfs_alloc_vextent+0x301/0x6c0 [xfs] xfs_ialloc_ag_alloc+0x182/0x700 [xfs] ? _xfs_trans_bjoin+0x72/0xf0 [xfs] xfs_dialloc+0x116/0x290 [xfs] xfs_ialloc+0x6d/0x5e0 [xfs] ? xfs_log_reserve+0x165/0x280 [xfs] xfs_dir_ialloc+0x8c/0x240 [xfs] xfs_create+0x35a/0x610 [xfs] xfs_generic_create+0x1f1/0x2f0 [xfs] ... Process B: Call trace: ? __schedule+0x2bd/0x620 ? xfs_bmapi_allocate+0x245/0x380 [xfs] schedule+0x33/0x90 schedule_timeout+0x17d/0x290 ? xfs_buf_find+0x1fd/0x6c0 [xfs] __down_common+0xef/0x125 ? xfs_buf_get_map+0x37/0x230 [xfs] ? xfs_buf_find+0x215/0x6c0 [xfs] down+0x3b/0x50 xfs_buf_lock+0x34/0xf0 [xfs] xfs_buf_find+0x215/0x6c0 [xfs] xfs_buf_get_map+0x37/0x230 [xfs] xfs_buf_read_map+0x29/0x190 [xfs] xfs_trans_read_buf_map+0x13d/0x520 [xfs] xfs_read_agi+0xa8/0x160 [xfs] xfs_iunlink_remove+0x6f/0x2a0 [xfs] ? current_time+0x46/0x80 ? xfs_trans_ichgtime+0x39/0xb0 [xfs] xfs_rename+0x57a/0xae0 [xfs] xfs_vn_rename+0xe4/0x150 [xfs] ... In this patch we move the xfs_iunlink_remove() call to before acquiring the AGF lock to preserve correct AGI/AGF locking order. [Minor massage required due to upstream change making xfs_bumplink() a void function where as in the 4.19.y tree the return value is checked, even though it is always zero. Only change was to the last code block removed by the patch. Functionally equivalent to upstream.] Signed-off-by:
kaixuxia <kaixuxia@tencent.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by:
-
Kazuhiro Fujita authored
commit 3dc4db36 upstream. For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: <stable@vger.kernel.org> Signed-off-by:
Kazuhiro Fujita <kazuhiro.fujita.jg@renesas.com> Signed-off-by:
Hao Bui <hao.bui.yg@renesas.com> Signed-off-by:
KAZUMI HARADA <kazumi.harada.rh@renesas.com> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.comSigned-off-by:
-
Mathias Nyman authored
commit e9fb08d6 upstream. Suspending the bus and host controller while a port is in a over-current condition may halt the host. Also keep the roothub running if over-current is active. Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200421140822.28233-3-mathias.nyman@linux.intel.comSigned-off-by:
-
Udipto Goswami authored
commit 1c2e54fb upstream. For userspace functions using OS Descriptors, if a function also supplies Extended Property descriptors currently the counts and lengths stored in the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not getting reset to 0 during an unbind or when the epfiles are closed. If the same function is re-bound and the descriptors are re-written, this results in those count/length variables to monotonically increase causing the VLA allocation in _ffs_func_bind() to grow larger and larger at each bind/unbind cycle and eventually fail to allocate. Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in ffs_data_reset(). Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Signed-off-by:
Udipto Goswami <ugoswami@codeaurora.org> Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> Reviewed-by:
Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/20200402044521.9312-1-sallenki@codeaurora.orgSigned-off-by:
-
Thinh Nguyen authored
commit 49e0590e upstream. A request may not be completed because not all the TRBs are prepared for it. This happens when we run out of available TRBs. When some TRBs are completed, the driver needs to prepare the rest of the TRBs for the request. The check dwc3_gadget_ep_request_completed() shouldn't be checking the amount of data received but rather the number of pending TRBs. Revise this request completion check. Cc: stable@vger.kernel.org Fixes: e0c42ce5 ("usb: dwc3: gadget: simplify IOC handling") Signed-off-by:
-
Oliver Neukum authored
commit f6cc6093 upstream. A SCSI error handler and block runtime PM must not allocate memory with GFP_KERNEL. Furthermore they must not wait for tasks allocating memory with GFP_KERNEL. That means that they cannot share a workqueue with arbitrary tasks. Fix this for UAS using a private workqueue. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: f9dc024a ("uas: pre_reset and suspend: Fix a few races") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.comSigned-off-by:
-
Oliver Neukum authored
commit 5963dec9 upstream. Once a device is gone, the internal state does not matter anymore. There is no need to spam the logs. Signed-off-by:
-
Oliver Neukum authored
commit a4e7279c upstream. Immediate submission in case of a babbling device can lead to a busy loop. Introducing a delayed work. Signed-off-by:
Jonas Karlsson <jonas.karlsson@actia.se> Link: https://lore.kernel.org/r/20200415151358.32664-2-oneukum@suse.comSigned-off-by:
-
Oliver Neukum authored
commit 0afccd76 upstream. Suspend increments a counter, then kills the URBs, then kills the scheduled work. The scheduled work, however, may reschedule the URBs. Fix this by having the work check the counter. Signed-off-by:
-
Malcolm Priestley authored
commit ea81c348 upstream. conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9b ("staging: vt6656: implement power saving code.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.comSigned-off-by:
-
Malcolm Priestley authored
commit 0b59f10b upstream. The problem is that the group key was saved as VNT_KEY_DEFAULTKEY was over written by the VNT_KEY_GROUP_ADDRESS index. mac80211 could not clear the mac_addr in the default key. The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as VNT_KEY_GROUP_ADDRESS. mac80211 can clear any key using vnt_mac_disable_keyentry. Fixes: f9ef05ce ("staging: vt6656: Fix pairwise key for non station modes") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit 09057742 upstream. The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c1515879 ("staging: vt6656: implement TSF counter") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit 664ba518 upstream. vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES, BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode. Fixes an issue that preamble mode is not being updated correctly. Fixes: c1260357 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit 0f8240bf upstream. mac80211/users control whether multicast is on or off don't enable it by default. Fixes an issue when multicast/broadcast is always on allowing other beacons through in power save. Fixes: db8f37fa ("staging: vt6656: mac80211 conversion: main_usb add functions...") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Nicolas Pitre authored
commit 9a98e7a8 upstream. Even if the actual screen size is bounded in vc_do_resize(), the unicode buffer is still a little more than twice the size of the glyph buffer and may exceed MAX_ORDER down the kmalloc() path. This can be triggered from user space. Since there is no point having a physically contiguous buffer here, let's avoid the above issue as well as reducing pressure on high order allocations by using vmalloc() instead. Signed-off-by:
Nicolas Pitre <nico@fluxnic.net> Cc: <stable@vger.kernel.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003282214210.2671@knanqh.ubzrSigned-off-by:
-
Nicolas Pitre authored
commit 2717769e upstream. The code in vc_do_resize() bounds the memory allocation size to avoid exceeding MAX_ORDER down the kzalloc() call chain and generating a runtime warning triggerable from user space. However, not only is it unwise to use a literal value here, but MAX_ORDER may also be configurable based on CONFIG_FORCE_MAX_ZONEORDER. Let's use KMALLOC_MAX_SIZE instead. Note that prior commit bb1107f7 ("mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value could not be relied upon. Signed-off-by:
-
Xiyu Yang authored
commit 332e0e17 upstream. comedi_open() invokes comedi_dev_get_from_minor(), which returns a reference of the COMEDI device to "dev" with increased refcount. When comedi_open() returns, "dev" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of comedi_open(). When "cfp" allocation is failed, the refcnt increased by comedi_dev_get_from_minor() is not decreased, causing a refcnt leak. Fix this issue by calling comedi_dev_put() on this error path when "cfp" allocation is failed. Fixes: 20f083c0 ("staging: comedi: prepare support for per-file read and write subdevices") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
Ian Abbott authored
commit ed87d33d upstream. The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by:
-
Chris Packham authored
commit 94c0b013 upstream. If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reported-by:
Qian Cai <cai@lca.pw> [mpe: Add even more detail to change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
Ahmad Fatoum authored
commit f1baca88 upstream. 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: <stable@vger.kernel.org> Fixes: 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by:
Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Tested-by:
Roland Hieber <rhi@pengutronix.de> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mordechay Goodstein authored
commit 290d5e49 upstream. We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeidSigned-off-by:
-
Johannes Berg authored
commit b98b33d5 upstream. The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Fixes: 6b35ff91 ("iwlwifi: pcie: introduce a000 TX queues management") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Gyeongtaek Lee authored
commit ebf14747 upstream. snd_soc_dapm_kcontrol widget which is created by autodisable control should contain correct on_val, mask and shift because it is set when the widget is powered and changed value is applied on registers by following code in dapm_seq_run_coalesced(). mask |= w->mask << w->shift; if (w->power) value |= w->on_val << w->shift; else value |= w->off_val << w->shift; Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent double shift. And, on_val in dapm_kcontrol_set_value() is modified to get correct value in the dapm_seq_run_coalesced(). Signed-off-by:
Gyeongtaek Lee <gt82.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Paul Moore authored
commit 763dafc5 upstream. Commit 75612528 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 75612528 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Alan Stern authored
commit 94f9c8c3 upstream. Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails to handle WRITE commands with the FUA bit set, even though it claims to support FUA. (Oddly enough, a later version of the same bridge, version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also oddly, the bridge _does_ support FUA when using the UAS transport instead of the Bulk-Only transport -- but this device was blacklisted for uas in commit bc3bdb12 ("usb-storage: Disable UAS on JMicron SATA enclosure") for apparently unrelated reasons.) This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA flag. This allows the bridge to work properly with usb-storage. Reported-and-tested-by:
Cyril Roelandt <tipecaml@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.orgSigned-off-by:
-
Jiri Slaby authored
commit 7127d243 upstream. init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200417105959.15201-2-jslaby@suse.czSigned-off-by:
-
Andrew Melnychenko authored
commit 9a9fc42b upstream. If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by:
Andrew Melnychenko <andrew@daynix.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.comSigned-off-by:
-
Uros Bizjak authored
commit fb56baae upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Fixes: a0861c02 ("KVM: Add VT-x machine check support") Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit b6467ab1 upstream. Check that the resolved slot (somewhat confusingly named 'start') is a valid/allocated slot before doing the final comparison to see if the specified gfn resides in the associated slot. The resolved slot can be invalid if the binary search loop terminated because the search index was incremented beyond the number of used slots. This bug has existed since the binary search algorithm was introduced, but went unnoticed because KVM statically allocated memory for the max number of slots, i.e. the access would only be truly out-of-bounds if all possible slots were allocated and the specified gfn was less than the base of the lowest memslot. Commit 36947254 ("KVM: Dynamically size memslot array based on number of used slots") eliminated the "all possible slots allocated" condition and made the bug embarrasingly easy to hit. Fixes: 9c1a5d38 ("kvm: optimize GFN to memslot lookup with large slots amount") Reported-by: syzbot+d889b59b2bb87d4047a2@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-2-sean.j.christopherson@intel.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 97daa028 upstream. Return the index of the last valid slot from gfn_to_memslot_approx() if its binary search loop yielded an out-of-bounds index. The index can be out-of-bounds if the specified gfn is less than the base of the lowest memslot (which is also the last valid memslot). Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is non-zero. Fixes: afdad616 ("KVM: s390: Fix storage attributes migration with memory slots") Cc: stable@vger.kernel.org # 4.19.x: 0774a964: KVM: Fix out of range accesses to memslots Cc: stable@vger.kernel.org # 4.19.x Signed-off-by:
-
George Wilson authored
commit eba5cf3d upstream. tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The "partner partition suspended" transport event disables the associated CRQ such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.' This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and retries the ibmvtpm_send_crq() once. Cc: stable@vger.kernel.org # 3.7.x Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Reported-by:
Linh Pham <phaml@us.ibm.com> Reviewed-by:
Stefan Berger <stefanb@linux.ibm.com> Signed-off-by:
George Wilson <gcwilson@linux.ibm.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit b160c94b upstream. Call disable_interrupts() if we have to revert to polling in order not to unnecessarily reserve the IRQ for the life-cycle of the driver. Cc: stable@vger.kernel.org # 4.5.x Reported-by:
Hans de Goede <hdegoede@redhat.com> Fixes: e3837e74 ("tpm_tis: Refactor the interrupt setup") Signed-off-by:
-
