- 10 Aug, 2021 6 commits
-
-
kernel test robot authored
for_each_node_by_type should have of_node_put() before return. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2108031654080.17639@hadrien
-
Laurent Dufour authored
When a CPU is hot added, the CPU ids are taken from the available mask from the lower possible set. If that set of values was previously used for a CPU attached to a different node, it appears to an application as if these CPUs have migrated from one node to another node which is not expected. To prevent this, it is needed to record the CPU ids used for each node and to not reuse them on another node. However, to prevent CPU hot plug to fail, in the case the CPU ids is starved on a node, the capability to reuse other nodes’ free CPU ids is kept. A warning is displayed in such a case to warn the user. A new CPU bit mask (node_recorded_ids_map) is introduced for each possible node. It is populated with the CPU onlined at boot time, and then when a CPU is hot plugged to a node. The bits in that mask remain when the CPU is hot unplugged, to remind this CPU ids have been used for this node. If no id set was found, a retry is made without removing the ids used on the other nodes to try reusing them. This is the way ids have been allocated prior to this patch. The effect of this patch can be seen by removing and adding CPUs using the Qemu monitor. In the following case, the first CPU from the node 2 is removed, then the first one from the node 1 is removed too. Later, the first CPU of the node 2 is added back. Without that patch, the kernel will number these CPUs using the first CPU ids available which are the ones freed when removing the second CPU of the node 0. This leads to the CPU ids 16-23 to move from the node 1 to the node 2. With the patch applied, the CPU ids 32-39 are used since they are the lowest free ones which have not been used on another node. At boot time: [root@vm40 ~]# numactl -H | grep cpus node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Vanilla kernel, after the CPU hot unplug/plug operations: [root@vm40 ~]# numactl -H | grep cpus node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 1 cpus: 24 25 26 27 28 29 30 31 node 2 cpus: 16 17 18 19 20 21 22 23 40 41 42 43 44 45 46 47 Patched kernel, after the CPU hot unplug/plug operations: [root@vm40 ~]# numactl -H | grep cpus node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 1 cpus: 24 25 26 27 28 29 30 31 node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Laurent Dufour authored
After a LPM, the device tree node ibm,dynamic-reconfiguration-memory may be updated by the hypervisor in the case the NUMA topology of the LPAR's memory is updated. This is handled by the kernel, but the memory's node is not updated because there is no way to move a memory block between nodes from the Linux kernel point of view. If later a memory block is added or removed, drmem_update_dt() is called and it is overwriting the DT node ibm,dynamic-reconfiguration-memory to match the added or removed LMB. But the LMB's associativity node has not been updated after the DT node update and thus the node is overwritten by the Linux's topology instead of the hypervisor one. Introduce a hook called when the ibm,dynamic-reconfiguration-memory node is updated to force an update of the LMB's associativity. However, ignore the call to that hook when the update has been triggered by drmem_update_dt(). Because, in that case, the LMB tree has been used to set the DT property and thus it doesn't need to be updated back. Since drmem_update_dt() is called under the protection of the device_hotplug_lock and the hook is called in the same context, use a simple boolean variable to detect that call. Signed-off-by:
-
Laurent Dufour authored
When a LPAR is migratable, we should consider the maximum possible NUMA node instead of the number of NUMA nodes from the actual system. The DT property 'ibm,current-associativity-domains' defines the maximum number of nodes the LPAR can see when running on that box. But if the LPAR is being migrated on another box, it may see up to the nodes defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable, that value should be used. Unfortunately, there is no easy way to know if an LPAR is migratable or not. The hypervisor exports the property 'ibm,migratable-partition' in the case it set to migrate partition, but that would not mean that the current partition is migratable. Without this patch, when a LPAR is started on a 2 node box and then migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on the 3rd node. In that case if a CPU from that 3rd node is added to the LPAR, it will be wrongly assigned to the node because the kernel has been set to use up to 2 nodes (the configuration of the departure node). With this patch applies, the CPU is correctly added to the 3rd node. Fixes: f9f130ff ("powerpc/numa: Detect support for coregroup") Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
Commit 3ccfebed ("powerpc, membarrier: Skip memory barrier in switch_mm()") added some logic to skip the smp_mb() in switch_mm_irqs_off() before the call to switch_mmu_context(). However, on non SMP smp_mb() is just a compiler barrier and doing it unconditionaly is simpler than the logic used to check whether the barrier is needed or not. After the patch: 00000000 <switch_mm_irqs_off>: ... c: 7c 04 18 40 cmplw r4,r3 10: 81 24 00 24 lwz r9,36(r4) 14: 91 25 04 c8 stw r9,1224(r5) 18: 4d 82 00 20 beqlr 1c: 48 00 00 00 b 1c <switch_mm_irqs_off+0x1c> 1c: R_PPC_REL24 switch_mmu_context Before the patch: 00000000 <switch_mm_irqs_off>: ... c: 7c 04 18 40 cmplw r4,r3 10: 81 24 00 24 lwz r9,36(r4) 14: 91 25 04 c8 stw r9,1224(r5) 18: 4d 82 00 20 beqlr 1c: 81 24 00 28 lwz r9,40(r4) 20: 71 29 00 0a andi. r9,r9,10 24: 40 82 00 34 bne 58 <switch_mm_irqs_off+0x58> 28: 48 00 00 00 b 28 <switch_mm_irqs_off+0x28> 28: R_PPC_REL24 switch_mmu_context ... 58: 2c 03 00 00 cmpwi r3,0 5c: 41 82 ff cc beq 28 <switch_mm_irqs_off+0x28> 60: 48 00 00 00 b 60 <switch_mm_irqs_off+0x60> 60: R_PPC_REL24 switch_mmu_context Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
Last user of in_kernel_text() stopped using in with commit 549e8152 ("powerpc: Make the 64-bit kernel as a position-independent executable"). Generic function is_kernel_text() does the same. So remote it. Signed-off-by:
-
- 04 Aug, 2021 8 commits
-
-
Nicholas Piggin authored
If an interrupt is taken in kernel mode, always use SIAR for it rather than looking at regs_sipr. This prevents samples piling up around interrupt enable (hard enable or interrupt replay via soft enable) in PMUs / modes where the PR sample indication is not in synch with SIAR. This results in better sampling of interrupt entry and exit in particular. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Tested-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Parth Shah authored
On POWER10 systems, the "ibm,thread-groups" property "2" indicates the cpus in thread-group share both L2 and L3 caches. Hence, use cache_property = 2 itself to find both the L2 and L3 cache siblings. Hence, create a new thread_group_l3_cache_map to keep list of L3 siblings, but fill the mask using same property "2" array. Signed-off-by:
Parth Shah <parth@linux.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
The helper function get_shared_cpu_map() was added in 'commit 500fe5f5 ("powerpc/cacheinfo: Report the correct shared_cpu_map on big-cores")' and subsequently expanded upon in 'commit 0be47634 ("powerpc/cacheinfo: Print correct cache-sibling map/list for L2 cache")' in order to help report the correct groups of threads sharing these caches on big-core systems where groups of threads within a core can share different sets of caches. Now that powerpc/cacheinfo is aware of "ibm,thread-groups" property, cache->shared_cpu_map contains the correct set of thread-siblings sharing the cache. Hence we no longer need the functions get_shared_cpu_map(). This patch removes this function. We also remove the helper function index_dir_to_cpu() which was only called by get_shared_cpu_map(). With these functions removed, we can still see the correct cache-sibling map/list for L1 and L2 caches on systems with L1 and L2 caches distributed among groups of threads in a core. With this patch, on a SMT8 POWER10 system where the L1 and L2 caches are split between the two groups of threads in a core, for CPUs 8,9, the L1-Data, L1-Instruction, L2, L3 cache CPU sibling list is as follows: $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10,12,14 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-15 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11,13,15 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-15 $ ppc64_cpu --smt=4 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8,10 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-11 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9,11 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-11 $ ppc64_cpu --smt=2 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8-9 /sys/devices/system/cpu/cpu9/cache/index0/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index1/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index2/shared_cpu_list:9 /sys/devices/system/cpu/cpu9/cache/index3/shared_cpu_list:8-9 $ ppc64_cpu --smt=1 $ grep . /sys/devices/system/cpu/cpu[89]/cache/index[0123]/shared_cpu_list /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list:8 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list:8 Signed-off-by:
-
Gautham R. Shenoy authored
Currently the cacheinfo code on powerpc indexes the "cache" objects (modelling the L1/L2/L3 caches) where the key is device-tree node corresponding to that cache. On some of the POWER server platforms thread-groups within the core share different sets of caches (Eg: On SMT8 POWER9 systems, threads 0,2,4,6 of a core share L1 cache and threads 1,3,5,7 of the same core share another L1 cache). On such platforms, there is a single device-tree node corresponding to that cache and the cache-configuration within the threads of the core is indicated via "ibm,thread-groups" device-tree property. Since the current code is not aware of the "ibm,thread-groups" property, on the aforementoined systems, cacheinfo code still treats all the threads in the core to be sharing the cache because of the single device-tree node (In the earlier example, the cacheinfo code would says CPUs 0-7 share L1 cache). In this patch, we make the powerpc cacheinfo code aware of the "ibm,thread-groups" property. We indexe the "cache" objects by the key-pair (device-tree node, thread-group id). For any CPUX, for a given level of cache, the thread-group id is defined to be the first CPU in the "ibm,thread-groups" cache-group containing CPUX. For levels of cache which are not represented in "ibm,thread-groups" property, the thread-group id is -1. [parth: Remove "static" keyword for the definition of "thread_group_l1_cache_map" and "thread_group_l2_cache_map" to get rid of the compile error.] Signed-off-by:
-
Masahiro Yamada authored
Currently, the install target in arch/powerpc/Makefile descends into arch/powerpc/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/powerpc/Makefile can run the shell script directly. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
The install target should not depend on any build artifact. The reason is explained in commit 19514fc6 ("arm, kbuild: make "make install" not depend on vmlinux"). Change the PowerPC installation code in a similar way. Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Masahiro Yamada authored
Commit c913e5f9 ("powerpc/boot: Don't install zImage.* from make install") added the zInstall target to arch/powerpc/boot/Makefile, but you cannot use it since the corresponding hook is missing in arch/powerpc/Makefile. It has never worked since its addition. Nobody has complained about it for 7 years, which means this code was unneeded. With this removal, the install.sh will be passed in with 4 parameters. Simplify the shell script. Signed-off-by:
-
Nathan Chancellor authored
After commit 7cbd631d4dec ("cpuidle: pseries: Fixup CEDE0 latency only for POWER10 onwards"), pseries_idle_probe() is no longer inlined when compiling with clang, which causes a modpost warning: WARNING: modpost: vmlinux.o(.text+0xc86a54): Section mismatch in reference from the function pseries_idle_probe() to the function .init.text:fixup_cede0_latency() The function pseries_idle_probe() references the function __init fixup_cede0_latency(). This is often because pseries_idle_probe lacks a __init annotation or the annotation of fixup_cede0_latency is wrong. pseries_idle_probe() is a non-init function, which calls fixup_cede0_latency(), which is an init function, explaining the mismatch. pseries_idle_probe() is only called from pseries_processor_idle_init(), which is an init function, so mark pseries_idle_probe() as __init so there is no more warning. Fixes: 054e44ba ("cpuidle: pseries: Add function to parse extended CEDE records") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
- 03 Aug, 2021 3 commits
-
-
Michal Suchanek authored
commit 7c6986ad ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()") introduces udelay() call without including the linux/delay.h header. This may happen to work on master but the header that declares the functionshould be included nonetheless. Fixes: 7c6986ad ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
-
Gautham R. Shenoy authored
Currently in fixup_cede0_latency() code, we perform the fixup the CEDE(0) exit latency value only if minimum advertized extended CEDE latency values are less than 10us. This was done so as to not break the expected behaviour on POWER8 platforms where the advertised latency was higher than the default 10us, which would delay the SMT folding on the core. However, after the earlier patch "cpuidle/pseries: Fixup CEDE0 latency only for POWER10 onwards", we can be sure that the fixup of CEDE0 latency is going to happen only from POWER10 onwards. Hence unconditionally use the minimum exit latency provided by the platform. Signed-off-by:
-
Gautham R. Shenoy authored
Commit d947fb4c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") sets the exit latency of CEDE(0) based on the latency values of the Extended CEDE states advertised by the platform On POWER9 LPARs, the firmwares advertise a very low value of 2us for CEDE1 exit latency on a Dedicated LPAR. The latency advertized by the PHYP hypervisor corresponds to the latency required to wakeup from the underlying hardware idle state. However the wakeup latency from the LPAR perspective should include 1. The time taken to transition the CPU from the Hypervisor into the LPAR post wakeup from platform idle state 2. Time taken to send the IPI from the source CPU (waker) to the idle target CPU (wakee). 1. can be measured via timer idle test, where we queue a timer, say for 1ms, and enter the CEDE state. When the timer fires, in the timer handler we compute how much extra timer over the expected 1ms have we consumed. On a a POWER9 LPAR the numbers are CEDE latency measured using a timer (numbers in ns) N Min Median Avg 90%ile 99%ile Max Stddev 400 2601 5677 5668.74 5917 6413 9299 455.01 1. and 2. combined can be determined by an IPI latency test where we send an IPI to an idle CPU and in the handler compute the time difference between when the IPI was sent and when the handler ran. We see the following numbers on POWER9 LPAR. CEDE latency measured using an IPI (numbers in ns) N Min Median Avg 90%ile 99%ile Max Stddev 400 711 7564 7369.43 8559 9514 9698 1200.01 Suppose, we consider the 99th percentile latency value measured using the IPI to be the wakeup latency, the value would be 9.5us This is in the ballpark of the default value of 10us. Hence, use the exit latency of CEDE(0) based on the latency values advertized by platform only from POWER10 onwards. The values advertized on POWER10 platforms is more realistic and informed by the latency measurements. For earlier platforms stick to the default value of 10us. The fix was suggested by Michael Ellerman. Fixes: d947fb4c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") Reported-by:
Enrico Joedecke <joedecke@de.ibm.com> Signed-off-by:
-
- 26 Jul, 2021 2 commits
-
-
Hari Bathini authored
As kprobe does not handle events happening in real mode, blacklist the functions that only get called in real mode or in kexec sequence with MMU turned off. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Merge our fixes branch, which contains some fixes that didn't make it into rc2 but which we'd like in next.
-
- 23 Jul, 2021 2 commits
-
-
Nicholas Piggin authored
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request by the L1 to switch the context of the vCPU over to that of its L2 guest, and return with an interrupt indication. The L1 is responsible for switching some registers to guest context, and the L0 switches others (including all the hypervisor privileged state). If the L2 MSR has TM active, then the L1 is responsible for recheckpointing the L2 TM state. Then the L1 exits to L0 via the H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit, and then it recheckpoints the TM state as part of the nested entry and finally HRFIDs into the L2 with TM active MSR. Not efficient, but about the simplest approach for something that's horrendously complicated. Problems arise if the L1 exits to the L0 with a TM state which does not match the L2 TM state being requested. For example if the L1 is transactional but the L2 MSR is non-transactional, or vice versa. The L0's HRFID can take a TM Bad Thing interrupt and crash. Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then ensuring that if the L1 is suspended then the L2 must have TM active, and if the L1 is not suspended then the L2 must not have TM active. Fixes: 360cae31 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Cc: stable@vger.kernel.org # v4.20+ Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Nicholas Piggin authored
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb7 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by:
-
- 18 Jul, 2021 13 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
-
Robert Richter authored
Documentation was not changed when renaming the script in commit 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh"). Fixing this. Basically does: $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh) Fixes: 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by:
Robert Richter <rrichter@amd.com> Signed-off-by:
-
Lecopzer Chen authored
When building modules(CONFIG_...=m), I found some of module versions are incorrect and set to 0. This can be found in build log for first clean build which shows WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed, symbol will not be versioned. But in second build(incremental build), the WARNING disappeared and the module version becomes valid CRC and make someone who want to change modules without updating kernel image can't insert their modules. The problematic code is + $(foreach n, $(filter-out FORCE,$^), \ + $(if $(wildcard $(n).symversions), \ + ; cat $(n).symversions >> $@.symversions)) For example: rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \ llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \ fs/notify/notification.o fs/notify/group.o ... `foreach n` shows nothing to `cat` into $(n).symversions because `if $(wildcard $(n).symversions)` return nothing, but actually they do exist during this line was executed. -rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o -rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions The reason is the $(n).symversions are generated at runtime, but Makefile wildcard function expends and checks the file exist or not during parsing the Makefile. Thus fix this by use `test` shell command to check the file existence in runtime. Rebase from both: 1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/] 2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/] Fixes: 38e89184 ("kbuild: lto: fix module versioning") Co-developed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by:
-
Masahiro Yamada authored
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc ("kbuild: sink stdout from cmd for silent build") Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Mikulas Patocka authored
The commit 042da426 ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426 ("scripts/setlocalversion: simplify the short version part") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Yang Jihong authored
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by:Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Yang Jihong authored
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.comSigned-off-by:
-
Riccardo Mancini authored
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 14552063 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by:
Riccardo Mancini <rickyman7@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.comSigned-off-by:
-
Riccardo Mancini authored
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by:
-
- 17 Jul, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ... -
Linus Torvalds authored
This reverts commit 78869146. It's not clear why, but it causes unexplained problems in entirely unrelated xfs code. The most likely explanation is some slab corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON. See [1]. It ends up having a few other problems too, like build errors on arch/arc, and Geert reporting it using much more memory on m68k [3] (it probably does so elsewhere too, but it is probably just more noticeable on m68k). The architecture issues (both build and memory use) are likely just because this change effectively force-enabled STACKDEPOT (along with a very bad default value for the stackdepot hash size). But together with the xfs issue, this all smells like "this commit was not ready" to me. Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1] Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2] Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3] Reported-by:
Christoph Hellwig <hch@infradead.org> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "One core fix for an oops which can occur if the error handling thread fails to start for some reason and the driver is removed. The other fixes are all minor ones in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() scsi: mpi3mr: Fix W=1 compilation warnings scsi: pm8001: Clean up kernel-doc and comments scsi: zfcp: Report port fc_security as unknown early during remote cable pull scsi: core: Fix bad pointer dereference when ehandler kthread is invalid scsi: fas216: Fix a build error scsi: core: Fix the documentation of the scsi_execute() time parameter
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, including three for stable. Three are DFS related fixes, and two to fix problems pointed out by static checkers" * tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: do not share tcp sessions of dfs connections SMB3.1.1: fix mount failure to some servers when compression enabled cifs: added WARN_ON for all the count decrements cifs: fix missing null session check in mount cifs: handle reconnect of tcon when there is no cached dfs referral cifs: fix the out of range assignment to bit fields in parse_server_interfaces cifs: Do not use the original cruid when following DFS links for multiuser mounts cifs: use the expiry output of dns_query to schedule next resolution
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "Fixes to kunit tool and documentation: - fix asserts on older python versions - fixes to misleading error messages when TAP header format is incorrect or when file is missing - documentation fix: drop obsolete information about uml_abort coverage - remove unnecessary annotations" * tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Assert the version requirement kunit: tool: remove unnecessary "annotations" import Documentation: kunit: drop obsolete note about uml_abort for coverage kunit: tool: Fix error messages for cases of no tests and wrong TAP header
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "A fix to memory-hotplug hot-remove test to stop spamming logs with dump_page() entries and slowing the system down to a crawl" * tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test
-
