- 22 Jul, 2023 1 commit
-
-
Javier Martinez Canillas authored
The drivers in this subsystem are for either character-based or monochrome LCD controllers. Which can fall into the same category of the DRM/KMS and fbdev drivers, that are located under the "Graphics support" menu. Add the auxdisplay drivers there as well to have all display drivers under the same menu. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Helge Deller <deller@gmx.de> Acked-by:
Miguel Ojeda <ojeda@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-2-javierm@redhat.com
-
- 21 Jul, 2023 9 commits
-
-
Geert Uytterhoeven authored
The page height must be taken into account only for vertical coordinates and heights, not for horizontal coordinates and widths. Fixes: 179a790a ("drm/ssd130x: Set the page height value in the device info data") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
David Jander authored
The documentation is not clear about how this delay works. Empirical tests have shown that with a VSDELAY of 0, the first scanline is not properly formatted in the output stream when DSI->DP mode is used. The calculation spreadsheets from Toshiba seem to always make this value equal to the HFP + 10 for DSI->DP use-case. For DSI->DPI this value should be > 2 and for DPI->DP it seems to always be 0x64. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de> # TC9595 Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
David Jander authored
The PLL often fails to lock with this delay. The new value was determined by trial and error increasing the delay bit by bit until the error did not occurr anymore even after several tries. Then double that value was taken as the minimum delay to be safe. Signed-off-by:
-
Faiz Abbas authored
The Komeda driver always expects the remote connector node to initialize an encoder. It uses the component aggregator framework which consists of component->bind() calls used to initialize the remote encoder and attach it to the crtc. This makes it incompatible with connector drivers which implement drm_bridge APIs. Remove all component framework calls from the komeda driver and declare and attach an encoder inside komeda_crtc_add(). The remote connector driver has to implement the DRM bridge APIs which can be used to glue the encoder to the remote connector. Since we usually pair this with a component encoder that also implements a drm_bridge, dropping support is not expected to affect users of this driver. Signed-off-by:
Faiz Abbas <faiz.abbas@arm.com> Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com> [small white space fixes flagged by checkpatch.pl] Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com
-
Bogdan Togorean authored
For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register. So depending on ADV model write 0xfb or 0x4a register. Fixes: 2437e7cd ("drm/bridge: adv7533: Initial support for ADV7533") Reviewed-by:
Robert Foss <rfoss@kernel.org> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by:
Alexandru Ardelean <alex@shruggie.ro> Reviewed-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by:
-
Miquel Raynal authored
There is apparently no reasons to open-code of_device_uevent() besides: - The helper receives a struct device while we want to use the of_node member of the struct device *parent*. - of_device_uevent() could not be called by modules because of a missing EXPORT_SYMBOL*(). In practice, the former point is not very constraining, just calling of_device_uevent(dev->parent, ...) would have made the trick. The latter point is more an observation rather than a real blocking point because nothing prevented of_uevent() (called by the inline function of_device_uevent()) to be exported to modules. In practice, this helper is now exported, so nothing prevent us from using of_device_uevent() anymore. Let's use the core helper directly instead of open-coding it. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Miquel Raynal authored
The content of of_device_uevent() is currently hardcoded in a driver that can be compiled as a module. Nothing prevents of_device_uevent() to be exported to modules, most of the other helpers in of/device.c actually are. The reason why this helper was not exported is because it has been so far only useful in drivers/base, which is built-in anyway. With the idea of getting rid of the hardcoded implementation of of_device_uevent() in other places in the kernel, let's export it to GPL modules (very much like its cousins in the same file). Signed-off-by:
-
- 20 Jul, 2023 6 commits
-
-
Steven Price authored
Casting a pointer to an integer of a different size generates a warning from the compiler. First cast the pointer to a pointer-sized type to keep the compiler happy. Fixes: 4f66feea ("drm: debugfs: provide infrastructure to dump a DRM GPU VA space") Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
-
Steven Price authored
sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f32 ("drm: manager to keep track of GPUs VA mappings") Reviewed-by:
-
Marek Vasut authored
This has been superseded by RPM in commit 3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") and the last user of the non-RPM case has been dropped in commit b6d5ffce ("drm/panel-simple: Non-eDP panels don't need "HPD" handling") whatever is left in this driver is just assigned and never used. Drop the remaining parts. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Simon Ser authored
Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an eventfd from a syncobj. This is useful for Wayland compositors to handle wait-before-submit. Wayland clients can send a timeline point to the compositor before the point has materialized yet, then compositors can wait for the point to materialize via this new IOCTL. The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable because it blocks. Compositors want to integrate the wait with their poll(2)-based event loop. Requirements for new uAPI: - User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262 - IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html v2: - Wait for fence when flags is zero - Improve documentation (Pekka) - Rename IOCTL (Christian) - Fix typo in drm_syncobj_add_eventfd() (Christian) v3: - Link user-space + IGT patches - Add reference from overview docs v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak) Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Daniel Stone <daniel@fooishbar.org> Cc: James Jones <jajones@nvidia.com> Cc: Austin Shafer <ashafer@nvidia.com> Cc: Vitaly Prosyak <vprosyak@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr
-
Danilo Krummrich authored
This commit adds a function to dump a DRM GPU VA space and a macro for drivers to register the struct drm_info_list 'gpuvas' entry. Most likely, most drivers might maintain one DRM GPU VA space per struct drm_file, but there might also be drivers not having a fixed relation between DRM GPU VA spaces and a DRM core infrastructure, hence we need the indirection via the driver iterating it's maintained DRM GPU VA spaces. Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Danilo Krummrich authored
Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Donald Robson <donald.robson@imgtec.com> Suggested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- 17 Jul, 2023 4 commits
-
-
Chen-Yu Tsai authored
The DRM DP code has macros for the DP HDCP capabilities. Use them in the anx7625 driver instead of raw numbers. Fixes: cd1637c7 ("drm/bridge: anx7625: add HDCP support") Suggested-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
-
Chen-Yu Tsai authored
The DRM DP code has macros for the DP power sequencing commands. Use them in the anx7625 driver instead of raw numbers. Fixes: 548b512e ("drm/bridge: anx7625: send DPCD command to downstream") Fixes: 27f26359 ("drm/bridge: anx7625: Set downstream sink into normal status") Signed-off-by:
-
Simon Ser authored
This makes it clearer that the values cannot be changed because they are ABI. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
-
Simon Ser authored
This makes it easier to figure out what the "type" variable can be set to when reading the implementation of these functions. Signed-off-by:
-
- 14 Jul, 2023 2 commits
-
-
Paul Cercueil authored
Register a backlight device to be able to switch between all the gamma levels. v2: Remove .get_brightness() callback, use bl_get_data() and backlight_get_brightness() Signed-off-by:Paul Cercueil <paul@crapouillou.net> Reviewed-by:
-
Paul Cercueil authored
I have no idea what the prior magic values mean, and I have no idea what my replacement (extracted from [1]) magic values mean. What I do know, is that these new values result in a much better picture, where the blacks are really black (as you would expect on an AMOLED display) instead of grey-ish. [1]: https://github.com/dorimanx/Dorimanx-SG2-I9100-Kernel/blob/master-jelly-bean/arch/arm/mach-exynos/u1-panel.h v2: Remove spurious new line Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
- 13 Jul, 2023 1 commit
-
-
Javier Martinez Canillas authored
The commit e254b584 ("drm/ssd130x: Remove hardcoded bits-per-pixel in ssd130x_buf_alloc()") used a pixel format info rather than a hardcoded bpp to calculate the size of the buffer allocated to store the native pixels. But it wrongly used the DRM_FORMAT_C1 fourcc pixel format. That is for color-indexed frame buffer formats, while the ssd103x controllers don't support different single-channel colors nor a Color Lookup Table (CLUT). So the correct pixel format to use in this case is DRM_FORMAT_R1 instead. Since both formats use a eight pixels/byte, there is no functional change in practice by this patch. Still, the correct pixel format should be used. Suggested-by:
-
- 12 Jul, 2023 7 commits
-
-
Sui Jingfeng authored
Because smatch warnings: drivers/gpu/drm/loongson/lsdc_plane.c:199 lsdc_cursor_plane_atomic_async_check() warn: variable dereferenced before check 'state' (see line 180) vim +/state +199 drivers/gpu/drm/loongson/lsdc_plane.c 174 static int lsdc_cursor_plane_atomic_async_check(struct drm_plane *plane, 175 struct drm_atomic_state *state) 176 { 177 struct drm_plane_state *new_state; 178 struct drm_crtc_state *crtc_state; 179 180 new_state = drm_atomic_get_new_plane_state(state, plane); ^^^^^ state is dereferenced inside this function 181 182 if (!plane->state || !plane->state->fb) { 183 drm_dbg(plane->dev, "%s: state is NULL\n", plane->name); 184 return -EINVAL; 185 } 186 187 if (new_state->crtc_w != new_state->crtc_h) { 188 drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n", 189 new_state->crtc_w, new_state->crtc_h); 190 return -EINVAL; 191 } 192 193 if (new_state->crtc_w != 64 && new_state->crtc_w != 32) { 194 drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n", 195 new_state->crtc_w, new_state->crtc_h); 196 return -EINVAL; 197 } 198 199 if (state) { ^^^^^ Checked too late! Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202307100423.rV7D05Uq-lkp@intel.com/Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Acked-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20230710102411.257970-1-suijingfeng@loongson.cn
-
Christian König authored
Use the new component here as well and remove the old handling. v2: drop dupplicate handling v3: fix memory leak pointed out by Tatsuyuki Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-7-christian.koenig@amd.com
-
Christian König authored
Start using the new component here as well. Signed-off-by:
-
Christian König authored
Start using the new component here as well. v2: ignore duplicates to allow per VM BO mappings Signed-off-by:
-
Christian König authored
Avoids quite a bit of logic and kmalloc overhead. v2: fix multiple problems pointed out by Felix v3: two more nit picks from Felix fixed Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
-
Christian König authored
Exercise at least all driver facing functions of this new component. v2: add array test as well v3: some kunit cleanups v4: more tests and cleanups Signed-off-by:
-
Christian König authored
This adds the infrastructure for an execution context for GEM buffers which is similar to the existing TTMs execbuf util and intended to replace it in the long term. The basic functionality is that we abstracts the necessary loop to lock many different GEM buffers with automated deadlock and duplicate handling. v2: drop xarray and use dynamic resized array instead, the locking overhead is unnecessary and measurable. v3: drop duplicate tracking, radeon is really the only one needing that. v4: fixes issues pointed out by Danilo, some typos in comments and a helper for lock arrays of GEM objects. v5: some suggestions by Boris Brezillon, especially just use one retry macro, drop loop in prepare_array, use flags instead of bool v6: minor changes suggested by Thomas, Boris and Danilo v7: minor typos pointed out by checkpatch.pl fixed Signed-off-by:
-
- 11 Jul, 2023 1 commit
-
-
Thomas Zimmermann authored
Include <linux/screen_info.h> to get the global screen_info state. Fixes the following errors: >> drivers/video/fbdev/hyperv_fb.c:1033:10: error: use of undeclared identifier 'screen_info' 1033 | base = screen_info.lfb_base; | ^ drivers/video/fbdev/hyperv_fb.c:1034:10: error: use of undeclared identifier 'screen_info' 1034 | size = screen_info.lfb_size; | ^ >> drivers/video/fbdev/hyperv_fb.c:1080:3: error: must use 'struct' tag to refer to type 'screen_info' 1080 | screen_info.lfb_size = 0; | ^ | struct >> drivers/video/fbdev/hyperv_fb.c:1080:14: error: expected identifier or '(' 1080 | screen_info.lfb_size = 0; | ^ drivers/video/fbdev/hyperv_fb.c:1081:3: error: must use 'struct' tag to refer to type 'screen_info' 1081 | screen_info.lfb_base = 0; | ^ | struct drivers/video/fbdev/hyperv_fb.c:1081:14: error: expected identifier or '(' 1081 | screen_info.lfb_base = 0; | ^ drivers/video/fbdev/hyperv_fb.c:1082:3: error: must use 'struct' tag to refer to type 'screen_info' 1082 | screen_info.orig_video_isVGA = 0; | ^ | struct drivers/video/fbdev/hyperv_fb.c:1082:14: error: expected identifier or '(' 1082 | screen_info.orig_video_isVGA = 0; | ^ 8 errors generated. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307101042.rqehuauj-lkp@intel.com/ Fixes: 8b0d1354 ("efi: Do not include <linux/screen_info.h> from EFI header") Signed-off-by:
-
- 10 Jul, 2023 9 commits
-
-
Javier Martinez Canillas authored
Otherwise if CONFIG_DRM is disabled, menuconfig will show an empty menu. Signed-off-by:
-
Rajneesh Bhardwaj authored
Delay release TTM BOs when the kernel default setting is init_on_free. This offloads the overhead of clearing the system memory to the work item and potentially a different CPU. This could be very beneficial when the application does a lot of malloc/free style allocations of system memory. Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Link: https://patchwork.freedesktop.org/patch/msgid/20230708011355.853-1-rajneesh.bhardwaj@amd.comSigned-off-by:
-
Nikhil Devshatwar authored
When removing the tidss driver, there is a warning reported by kernel about an unhandled interrupt for mhdp driver. [ 43.238895] irq 31: nobody cared (try booting with the "irqpoll" option) ... [snipped backtrace] [ 43.330735] handlers: [ 43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>] cdns_mhdp_irq_handler [cdns_mhdp8546] [ 43.344607] Disabling IRQ #31 This happens because as part of cdns_mhdp_bridge_hpd_disable, driver tries to disable the interrupts. While disabling the SW_EVENT interrupts, it accidentally enables the MBOX interrupts, which are not handled by the driver. Fix this with a read-modify-write to update only required bits. Use the enable / disable function as required in other places. Signed-off-by:
Nikhil Devshatwar <nikhil.nd@ti.com> Reviewed-by:
Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by:
-
Aradhya Bhatia authored
With the new encoder/bridge chain model, the display controller driver is required to create a drm_connector entity instead of asking the bridge to do so during drm_bridge_attach. Moreover, the controller driver should create a drm_bridge entity to negotiate bus formats and a 'simple' drm_encoder entity to expose it to userspace. Update the encoder/bridge initialization sequence in tidss as per the new model. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Aradhya Bhatia authored
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Implement atomic_check hook for the same. Signed-off-by:
-
Aradhya Bhatia authored
With new connector model, sii902x will not create the connector, when DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and SoC driver will rely on format negotiation to setup the encoder format. Support format negotiations hooks in the drm_bridge_funcs. Use helper functions for state management. Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is the case with older model. Signed-off-by:
-
Nikhil Devshatwar authored
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Signed-off-by:
-
Nikhil Devshatwar authored
With new connector model, mhdp bridge will not create the connector and SoC driver will rely on format negotiation to setup the encoder format. Support minimal format negotiations hooks in the drm_bridge_funcs. Complete format negotiation can be added based on EDID data. This patch adds the minimal required support to avoid failure after moving to new connector model. Signed-off-by:
-
Nikhil Devshatwar authored
input_bus_flags are specified in drm_bridge_timings (legacy) as well as drm_bridge_state->input_bus_cfg.flags The flags from the timings will be deprecated. Bridges are supposed to validate and set the bridge state flags from atomic_check. Implement atomic_check hook for the same. Signed-off-by:
-
