- 29 Aug, 2024 5 commits
-
-
Matthieu Baerts (NGI0) authored
Taking the first one on the list doesn't work in some cases, e.g. if the initial subflow is being removed. Pick another one instead of not sending anything. Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Matthieu Baerts (NGI0) authored
Removing the endpoint linked to the initial subflow should trigger a RM_ADDR for the right ID, and the removal of the subflow. That's what is now being verified in the "delete and re-add" test. Note that removing the initial subflow will not decrement the 'subflows' counters, which corresponds to the *additional* subflows. On the other hand, when the same endpoint is re-added, it will increment this counter, as it will be seen as an additional subflow this time. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The initial subflow has a special local ID: 0. When an endpoint is being deleted, it is then important to check if its address is not linked to the initial subflow to send the right ID. If there was an endpoint linked to the initial subflow, msk's mpc_endpoint_id field will be set. We can then use this info when an endpoint is being removed to see if it is linked to the initial subflow. So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(), it is no longer needed to use mptcp_local_id_match(). Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
When the endpoint used by the initial subflow is removed and re-added later, the PM has to force the ID 0, it is a special case imposed by the MPTCP specs. Note that the endpoint should then need to be re-added reusing the same ID. Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking") Cc: stable@vger.kernel.org Reviewed-by:
-
Eric Dumazet authored
Typically, busy-polling durations are below 100 usec. When/if the busy-poller thread migrates to another cpu, local_clock() can be off by +/-2msec or more for small values of HZ, depending on the platform. Use ktimer_get_ns() to ensure deterministic behavior, which is the whole point of busy-polling. Fixes: 06021292 ("net: add low latency socket poll") Fixes: 9a3c71aa ("net: convert low latency sockets to sched_clock()") Fixes: 37089834 ("sched, net: Fixup busy_loop_us_clock()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 28 Aug, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Regressions: * wfx: fix for open network connection * iwlwifi: fix for hibernate (due to fast resume feature) * iwlwifi: fix for a few warnings that were recently added (had previously been messages not warnings) Previously broken: * mwifiex: fix static structures used for per-device data * iwlwifi: some harmless FW related messages were tagged too high priority * iwlwifi: scan buffers weren't checked correctly * mac80211: SKB leak on beacon error path * iwlwifi: fix ACPI table interop with certain BIOSes * iwlwifi: fix locking for link selection * mac80211: fix SSID comparison in beacon validation * tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: clear trans->state earlier upon error wifi: wfx: repair open network AP mode wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap() wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan wifi: iwlwifi: mvm: pause TCM when the firmware is stopped wifi: iwlwifi: fw: fix wgds rev 3 exact size wifi: iwlwifi: mvm: take the mutex before running link selection wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation wifi: iwlwifi: lower message level for FW buffer destination wifi: iwlwifi: mvm: fix hibernation wifi: mac80211: fix beacon SSID mismatch handling wifi: mwifiex: duplicate static structs used in driver instances ==================== Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.netSigned-off-by:
-
- 27 Aug, 2024 18 commits
-
-
Ondrej Mosnacek authored
sctp_sf_do_5_2_4_dupcook() currently calls security_sctp_assoc_request() on new_asoc, but as it turns out, this association is always discarded and the LSM labels never get into the final association (asoc). This can be reproduced by having two SCTP endpoints try to initiate an association with each other at approximately the same time and then peel off the association into a new socket, which exposes the unitialized labels and triggers SELinux denials. Fix it by calling security_sctp_assoc_request() on asoc instead of new_asoc. Xin Long also suggested limit calling the hook only to cases A, B, and D, since in cases C and E the COOKIE ECHO chunk is discarded and the association doesn't enter the ESTABLISHED state, so rectify that as well. One related caveat with SELinux and peer labeling: When an SCTP connection is set up simultaneously in this way, we will end up with an association that is initialized with security_sctp_assoc_request() on both sides, so the MLS component of the security context of the association will get swapped between the peers, instead of just one side setting it to the other's MLS component. However, at that point security_sctp_assoc_request() had already been called on both sides in sctp_sf_do_unexpected_init() (on a temporary association) and thus if the exchange didn't fail before due to MLS, it won't fail now either (most likely both endpoints have the same MLS range). Tested by: - reproducer from https://src.fedoraproject.org/tests/selinux/pull-request/530 - selinux-testsuite (https://github.com/SELinuxProject/selinux-testsuite/) - sctp-tests (https://github.com/sctp/sctp-tests) - no tests failed that wouldn't fail also without the patch applied Fixes: c081d53f ("security: pass asoc to sctp_assoc_request and sctp_sk_clone") Suggested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Acked-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: close subflow when receiving TCP+FIN and misc. Here are different fixes: Patch 1 closes the subflow after having received a FIN, instead of leaving it half-closed until the end of the MPTCP connection. A fix for v5.12. Patch 2 validates the previous patch. Patch 3 is a fix for a recent fix to check both directions for the backup flag. It can follow the 'Fixes' commit and be backported up to v5.7. Patch 4 adds a missing \n at the end of pr_debug(), causing debug messages to be displayed with a delay, which confuses the debugger. A fix for v5.6. ==================== Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-0-905199fe1172@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
pr_debug() have been added in various places in MPTCP code to help developers to debug some situations. With the dynamic debug feature, it is easy to enable all or some of them, and asks users to reproduce issues with extra debug. Many of these pr_debug() don't end with a new line, while no 'pr_cont()' are used in MPTCP code. So the goal was not to display multiple debug messages on one line: they were then not missing the '\n' on purpose. Not having the new line at the end causes these messages to be printed with a delay, when something else needs to be printed. This issue is not visible when many messages need to be printed, but it is annoying and confusing when only specific messages are expected, e.g. # echo "func mptcp_pm_add_addr_echoed +fmp" \ > /sys/kernel/debug/dynamic_debug/control # ./mptcp_join.sh "signal address"; \ echo "$(awk '{print $1}' /proc/uptime) - end"; \ sleep 5s; \ echo "$(awk '{print $1}' /proc/uptime) - restart"; \ ./mptcp_join.sh "signal address" 013 signal address (...) 10.75 - end 15.76 - restart 013 signal address [ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...) (...) => a delay of 5 seconds: printed with a 10.36 ts, but after 'restart' which was printed at the 15.76 ts. The 'Fixes' tag here below points to the first pr_debug() used without '\n' in net/mptcp. This patch could be split in many small ones, with different Fixes tag, but it doesn't seem worth it, because it is easy to re-generate this patch with this simple 'sed' command: git grep -l pr_debug -- net/mptcp | xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g" So in case of conflicts, simply drop the modifications, and launch this command. Fixes: f870fa0b ("mptcp: Add MPTCP socket stubs") Cc: stable@vger.kernel.org Reviewed-by:Geliang Tang <geliang@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Looking only at the 'backup' flag can make sense in some cases, but it is not the behaviour of the default packet scheduler when selecting paths. As explained in the commit b6a66e52 ("mptcp: sched: check both directions for backup"), the packet scheduler should look at both flags, because that was the behaviour from the beginning: the 'backup' flag was set by accident instead of the 'request_bkup' one. Now that the latter has been fixed, get_retrans() needs to be adapted as well. Fixes: b6a66e52 ("mptcp: sched: check both directions for backup") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Thanks to the previous commit, the MPTCP subflows are now closed on both directions even when only the MPTCP path-manager of one peer asks for their closure. In the two tests modified here -- "userspace pm add & remove address" and "userspace pm create destroy subflow" -- one peer is controlled by the userspace PM, and the other one by the in-kernel PM. When the userspace PM sends a RM_ADDR notification, the in-kernel PM will automatically react by closing all subflows using this address. Now, thanks to the previous commit, the subflows are properly closed on both directions, the userspace PM can then no longer closes the same subflows if they are already closed. Before, it was OK to do that, because the subflows were still half-opened, still OK to send a RM_ADDR. In other words, thanks to the previous commit closing the subflows, an error will be returned to the userspace if it tries to close a subflow that has already been closed. So no need to run this command, which mean that the linked counters will then not be incremented. These tests are then no longer sending both a RM_ADDR, then closing the linked subflow just after. The test with the userspace PM on the server side is now removing one subflow linked to one address, then sending a RM_ADDR for another address. The test with the userspace PM on the client side is now only removing the subflow that was previously created. Fixes: 4369c198 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
When a peer decides to close one subflow in the middle of a connection having multiple subflows, the receiver of the first FIN should accept that, and close the subflow on its side as well. If not, the subflow will stay half closed, and would even continue to be used until the end of the MPTCP connection or a reset from the network. The issue has not been seen before, probably because the in-kernel path-manager always sends a RM_ADDR before closing the subflow. Upon the reception of this RM_ADDR, the other peer will initiate the closure on its side as well. On the other hand, if the RM_ADDR is lost, or if the path-manager of the other peer only closes the subflow without sending a RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it, leaving the subflow half-closed. So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if the MPTCP connection has not been closed before with a DATA_FIN, the kernel owning the subflow schedules its worker to initiate the closure on its side as well. This issue can be easily reproduced with packetdrill, as visible in [1], by creating an additional subflow, injecting a FIN+ACK before sending the DATA_FIN, and expecting a FIN+ACK in return. Fixes: 40947e13 ("mptcp: schedule worker when subflow is closed") Cc: stable@vger.kernel.org Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1] Reviewed-by:
-
Xueming Feng authored
We have some problem closing zero-window fin-wait-1 tcp sockets in our environment. This patch come from the investigation. Previously tcp_abort only sends out reset and calls tcp_done when the socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only purging the write queue, but not close the socket and left it to the timer. While purging the write queue, tp->packets_out and sk->sk_write_queue is cleared along the way. However tcp_retransmit_timer have early return based on !tp->packets_out and tcp_probe_timer have early return based on !sk->sk_write_queue. This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched and socket not being killed by the timers, converting a zero-windowed orphan into a forever orphan. This patch removes the SOCK_DEAD check in tcp_abort, making it send reset to peer and close the socket accordingly. Preventing the timer-less orphan from happening. According to Lorenzo's email in the v1 thread, the check was there to prevent force-closing the same socket twice. That situation is handled by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is already closed. The -ENOENT code comes from the associate patch Lorenzo made for iproute2-ss; link attached below, which also conform to RFC 9293. At the end of the patch, tcp_write_queue_purge(sk) is removed because it was already called in tcp_done_with_error(). p.s. This is the same patch with v2. Resent due to mis-labeled "changes requested" on patchwork.kernel.org. Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/ Fixes: c1e64e29 ("net: diag: Support destroying TCP sockets.") Signed-off-by:
Xueming Feng <kuro@kuroa.me> Tested-by:
Lorenzo Colitti <lorenzo@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Reviewed-by:
-
Cong Wang authored
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.) Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Cc: Andreas Schultz <aschultz@tpip.net> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Jianbo Liu says: ==================== Fixes for IPsec over bonding This patchset provides bug fixes for IPsec over bonding driver. It adds the missing xdo_dev_state_free API, and fixes "scheduling while atomic" by using mutex lock instead. Series generated against: commit c07ff859 ("netem: fix return value if duplicate enqueue fails") ==================== Link: https://patch.msgid.link/20240823031056.110999-1-jianbol@nvidia.comSigned-off-by:
-
Jianbo Liu authored
In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] <TASK> [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. Fixes: 9a560550 ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240823031056.110999-4-jianbol@nvidia.comSigned-off-by:
-
Jianbo Liu authored
Add a local variable for slave->dev, to prepare for the lock change in the next patch. There is no functionality change. Fixes: 9a560550 ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by:
-
Jianbo Liu authored
Add this implementation for bonding, so hardware resources can be freed from the active slave after xfrm state is deleted. The netdev used to invoke xdo_dev_state_free callback, is saved in the xfrm state (xs->xso.real_dev), which is also the bond's active slave. To prevent it from being freed, acquire netdev reference before leaving RCU read-side critical section, and release it after callback is done. And call it when deleting all SAs from old active real interface while switching current active slave. Fixes: 9a560550 ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by:
-
Petr Machata authored
This test neglects to put ports down on cleanup. Fix it. Fixes: 90b9566a ("selftests: forwarding: add a test for local_termination.sh") Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/bf9b79f45de378f88344d44550f0a5052b386199.1724692132.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
This test neglects to put ports down on cleanup. Fix it. Fixes: 476a4f05 ("selftests: forwarding: add a no_forwarding.sh test") Signed-off-by:
-
Eric Dumazet authored
fq_dequeue() has a complex logic to find packets in one of the 3 bands. As Neal found out, it is possible that one band has a deficit smaller than its weight. fq_dequeue() can return NULL while some packets are elligible for immediate transmit. In this case, more than one iteration is needed to refill pband->credit. With default parameters (weights 589824 196608 65536) bug can trigger if large BIG TCP packets are sent to the lowest priority band. Bisected-by:
John Sperbeck <jsperbeck@google.com> Diagnosed-by:
Neal Cardwell <ncardwell@google.com> Fixes: 29f834aa ("net_sched: sch_fq: add 3 bands and WRR scheduling") Signed-off-by:
-
Brett Creeley authored
With recent work to the doorbell workaround code a small hole was introduced that could cause a tx_timeout. This happens if the rx dbell_deadline goes beyond the netdev watchdog timeout set by the driver (i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5 seconds and reduce the max rx dbell_deadline to 4 seconds. The test that can reproduce the issue being fixed is a multi-queue send test via pktgen with the "burst" setting to 1. This causes the queue's doorbell to be rung on every packet sent to the driver, which may result in the device missing doorbells due to the high doorbell rate. Cc: stable@vger.kernel.org Fixes: 4ded136c ("ionic: add work item for missed-doorbell check") Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.comSigned-off-by:
-
Emmanuel Grumbach authored
When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Alexander Sverdlin authored
RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by:Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com
-
- 26 Aug, 2024 15 commits
-
-
MD Danish Anwar authored
Crash is seen on AM64x 10M link when connecting / disconnecting multiple times. The fix for this is to enable quirk_10m_link_issue for AM64x. Fixes: b256e133 ("net: ti: icssg-prueth: Add AM64x icssg support") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.comSigned-off-by:
-
Jamie Bainbridge authored
A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd7 ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17e ("net: export device speed and duplex via sysfs") Fixes: 4224cfd7 ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by:Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btintel: Allow configuring drive strength of BRI - hci_core: Fix not handling hibernation actions - btnxpuart: Fix random crash seen while removing driver * tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_core: Fix not handling hibernation actions Bluetooth: btnxpuart: Fix random crash seen while removing driver Bluetooth: btintel: Allow configuring drive strength of BRI ==================== Link: https://patch.msgid.link/20240823200008.65241-1-luiz.dentz@gmail.comSigned-off-by:
-
Dmitry Antipov authored
In 'ieee80211_beacon_get_ap()', free allocated skb in case of error returned by 'ieee80211_beacon_protect()'. Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240805142035.227847-1-dmantipov@yandex.ruSigned-off-by:
-
Emmanuel Grumbach authored
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by:
-
Avraham Stern authored
MLO internal scan may include 6 GHz channels. Since the 6 GHz scan indication is not set, the channel flags are set incorrectly, which leads to a firmware assert. Since the MLO scan may include 6 GHz and non 6 GHz channels in one request, add support for non-PSC 6 GHz channels (PSC channels are already supported) when the 6 GHz indication is not set. Fixes: 38b3998d ("wifi: iwlwifi: mvm: Introduce internal MLO passive scan") Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 Signed-off-by:
-
Anjaneyulu authored
Check size of WGDS revision 3 is equal to 8 entries size with some header, but doesn't depend on the number of used entries. Check that used entries are between min and max but allow more to be present than are used to fix operation with some BIOSes that have such data. Fixes: 97f8a3d1 ("iwlwifi: ACPI: support revision 3 WGDS tables") Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
iwl_mvm_select_links is called by the link selection worker and it requires the mutex. Take it in the link selection worker. This logic used to run from iwl_mvm_rx_umac_scan_complete_notif which had the mvm->mutex held. This was changed to run in a worker holding the wiphy mutex, but we also need the mvm->mutex. Fixes: 2e194efa ("wifi: iwlwifi: mvm: Fix race in scan completion") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Daniel Gabay authored
Driver creates also the WFA TPC element, consider that in the calculation. Signed-off-by:
Daniel Gabay <daniel.gabay@intel.com> Reviewed-by:
-
Daniel Gabay authored
The calculation should consider also the 6GHz IE's len, fix that. In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is called only in case non_psc_incldued is true, but it should be called regardless, fix that as well. Signed-off-by:
-
Benjamin Berg authored
An invalid buffer destination is not a problem for the driver and it does not make sense to report it with the KERN_ERR message level. As such, change the message to use IWL_DEBUG_FW. Reported-by:
Len Brown <lenb@kernel.org> Closes: https://lore.kernel.org/r/CAJvTdKkcxJss=DM2sxgv_MR5BeZ4_OC-3ad6tA40TYH2yqHCWw@mail.gmail.comSigned-off-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Fast resume is a feature that was recently introduced to speed up the resume time. It basically keeps the firmware alive while the system is suspended and that avoids starting again the whole device. This flow can't work for hibernation, since when the system boots, before the frozen image is loaded, the kernel may touch the device. As a result, we can't assume the device is in the exact same state as before the hibernation. Detect that we are resuming from hibernation through the PCI device and forbid the fast resume flow. We also need to shut down the device cleanly when that happens. In addition, in case the device is power gated during S3, we won't be able to keep the device alive. Detect this situation with BE200 at least with the help of the CSR_FUNC_SCRATCH register and reset the device upon resume if it was power gated during S3. Fixes: e8bb19c1 ("wifi: iwlwifi: support fast resume") Signed-off-by:
-
Daniel Gabay authored
Return false when memcmp with zero_ssid returns 0 to correctly handle hidden SSIDs case. Fixes: 9cc88678 ("wifi: mac80211: check SSID in beacon") Reviewed-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by:
-
Jacky Chou authored
The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by:
Jacky Chou <jacky_chou@aspeedtech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Aug, 2024 1 commit
-
-
Luiz Augusto von Dentz authored
This fixes not handling hibernation actions on suspend notifier so they are treated in the same way as regular suspend actions. Fixes: 9952d90e ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
