Once tag-based KASAN modes start tagging vmalloc() allocations, kernel
stacks start getting tagged if CONFIG_VMAP_STACK is enabled.

Reset the tag of kernel stack pointers after allocation in
alloc_thread_stack_node().

For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation
can't handle the SP register being tagged.

For HW_TAGS KASAN, there's no instrumentation-related issues.  However,
the impact of having a tagged SP register needs to be properly evaluated,
so keep it non-tagged for now.

Note, that the memory for the stack allocation still gets tagged to catch
vmalloc-into-stack out-of-bounds accesses.

Link: https://lkml.kernel.org/r/c6c96f012371ecd80e1936509ebcd3b07a5956f7.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In preparation for adding vmalloc support to SW/HW_TAGS KASAN, reset
pointer tags in functions that use pointer values in range checks.

vread() is a special case here.  Despite the untagging of the addr pointer
in its prologue, the accesses performed by vread() are checked.

Instead of accessing the virtual mappings though addr directly, vread()
recovers the physical address via page_address(vmalloc_to_page()) and
acceses that.  And as page_address() recovers the pointer tag, the
accesses get checked.

Link: https://lkml.kernel.org/r/046003c5f683cacb0ba18e1079e9688bb3dca943.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add wrappers around functions that [un]poison memory for vmalloc
allocations.  These functions will be used by HW_TAGS KASAN and therefore
need to be disabled when kasan=off command line argument is provided.

This patch does no functional changes for software KASAN modes.

Link: https://lkml.kernel.org/r/3b8728eac438c55389fb0f9a8a2145d71dd77487.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Group functions that [de]populate shadow memory for vmalloc.  Group
functions that [un]poison memory for vmalloc.

This patch does no functional changes but prepares KASAN code for adding
vmalloc support to HW_TAGS KASAN.

Link: https://lkml.kernel.org/r/aeef49eb249c206c4c9acce2437728068da74c28.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The comment about VM_KASAN in include/linux/vmalloc.c is outdated.
VM_KASAN is currently only used to mark vm_areas allocated for kernel
modules when CONFIG_KASAN_VMALLOC is disabled.

Drop the comment.

Link: https://lkml.kernel.org/r/780395afea83a147b3b5acc36cf2e38f7f8479f9.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Rename kasan_free_shadow to kasan_free_module_shadow and
kasan_module_alloc to kasan_alloc_module_shadow.

These functions are used to allocate/free shadow memory for kernel modules
when KASAN_VMALLOC is not enabled.  The new names better reflect their
purpose.

Also reword the comment next to their declaration to improve clarity.

Link: https://lkml.kernel.org/r/36db32bde765d5d0b856f77d2d806e838513fe84.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In preparation for adding vmalloc support to SW_TAGS KASAN, provide a
KASAN_VMALLOC_INVALID definition for it.

HW_TAGS KASAN won't be using this value, as it falls back onto page_alloc
for poisoning freed vmalloc() memory.

Link: https://lkml.kernel.org/r/1daaaafeb148a7ae8285265edc97d7ca07b6a07d.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Most of the metadata byte values are only used for Generic KASAN.

Remove KASAN_KMALLOC_FREETRACK definition for !CONFIG_KASAN_GENERIC case,
and put it along with other metadata values for the Generic mode under a
corresponding ifdef.

Link: https://lkml.kernel.org/r/ac11d6e9e007c95e472e8fdd22efb6074ef3c6d8.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Rework the checks around kasan_unpoison_pages() call in post_alloc_hook().

The logical condition for calling this function is:

 - If a software KASAN mode is enabled, we need to mark shadow memory.

 - Otherwise, HW_TAGS KASAN is enabled, and it only makes sense to set
   tags if they haven't already been cleared by tag_clear_highpage(),
   which is indicated by init_tags.

This patch concludes the changes for post_alloc_hook().

Link: https://lkml.kernel.org/r/0ecebd0d7ccd79150e3620ea4185a32d3dfe912f.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull the kernel_init_free_pages() call in post_alloc_hook() out of the big
if clause for better code readability.  This also allows for more
simplifications in the following patch.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/a7a76456501eb37ddf9fca6529cee9555e59cdb1.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull the SetPageSkipKASanPoison() call in post_alloc_hook() out of the big
if clause for better code readability.  This also allows for more
simplifications in the following patches.

Also turn the kasan_has_integrated_init() check into the proper
kasan_hw_tags_enabled() one.  These checks evaluate to the same value, but
logically skipping kasan poisoning has nothing to do with integrated init.

Link: https://lkml.kernel.org/r/7214c1698b754ccfaa44a792113c95cc1f807c48.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move tag_clear_highpage() loops out of the kasan_has_integrated_init()
clause as a code simplification.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/587e3fc36358b88049320a89cc8dc6deaecb0cda.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, the code responsible for initializing and poisoning memory in
post_alloc_hook() is scattered across two locations: kasan_alloc_pages()
hook for HW_TAGS KASAN and post_alloc_hook() itself.  This is confusing.

This and a few following patches combine the code from these two
locations.  Along the way, these patches do a step-by-step restructure the
many performed checks to make them easier to follow.

Replace the only caller of kasan_alloc_pages() with its implementation.

As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is
enabled, moving the code does no functional changes.

Also move init and init_tags variables definitions out of
kasan_has_integrated_init() clause in post_alloc_hook(), as they have the
same values regardless of what the if condition evaluates to.

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

Link: https://lkml.kernel.org/r/5ac7e0b30f5cbb177ec363ddd7878a3141289592.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Separate code for zeroing memory from the code clearing tags in
post_alloc_hook().

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/2283fde963adfd8a2b29a92066f106cc16661a3c.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_ZEROTAGS should only be effective if memory is being zeroed.
Currently, hardware tag-based KASAN violates this requirement.

Fix by including an initialization check along with checking for
__GFP_ZEROTAGS.

Link: https://lkml.kernel.org/r/f4f4593f7f675262d29d07c1938db5bd0cd5e285.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_ZEROTAGS is intended as an optimization: if memory is zeroed during
allocation, it's possible to set memory tags at the same time with little
performance impact.

Clarify this intention of __GFP_ZEROTAGS in the comment.

Link: https://lkml.kernel.org/r/cdffde013973c5634a447513e10ec0d21e8eee29.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

skip_kasan_poison is only used in a single place.  Call
should_skip_kasan_poison() directly for simplicity.

Link: https://lkml.kernel.org/r/1d33212e79bc9ef0b4d3863f903875823e89046f.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 7a3b8353 ("kasan: use separate (un)poison implementation
for integrated init"), when all init, kasan_has_integrated_init(), and
skip_kasan_poison are true, free_pages_prepare() doesn't initialize the
page.  This is wrong.

Fix it by remembering whether kasan_poison_pages() performed
initialization, and call kernel_init_free_pages() if it didn't.

Reordering kasan_poison_pages() and kernel_init_free_pages() is OK, since
kernel_init_free_pages() can handle poisoned memory.

Link: https://lkml.kernel.org/r/1d97df75955e52727a3dc1c4e33b3b50506fc3fd.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simplify the code around calling kasan_poison_pages() in
free_pages_prepare().

This patch does no functional changes.

Link: https://lkml.kernel.org/r/ae4f9bcf071577258e786bcec4798c145d718c46.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, the code responsible for initializing and poisoning memory in
free_pages_prepare() is scattered across two locations: kasan_free_pages()
for HW_TAGS KASAN and free_pages_prepare() itself.  This is confusing.

This and a few following patches combine the code from these two
locations.  Along the way, these patches also simplify the performed
checks to make them easier to follow.

Replaces the only caller of kasan_free_pages() with its implementation.

As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is
enabled, moving the code does no functional changes.

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

Link: https://lkml.kernel.org/r/303498d15840bb71905852955c6e2390ecc87139.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, kernel_init_free_pages() serves two purposes: it either only
zeroes memory or zeroes both memory and memory tags via a different code
path.  As this function has only two callers, each using only one code
path, this behaviour is confusing.

Pull the code that zeroes both memory and tags out of
kernel_init_free_pages().

As a result of this change, the code in free_pages_prepare() starts to
look complicated, but this is improved in the few following patches.
Those improvements are not integrated into this patch to make diffs easier
to read.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/7719874e68b23902629c7cf19f966c4fd5f57979.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "kasan, vmalloc, arm64: add vmalloc tagging support for SW/HW_TAGS", v6.

This patchset adds vmalloc tagging support for SW_TAGS and HW_TAGS
KASAN modes.

About half of patches are cleanups I went for along the way.  None of them
seem to be important enough to go through stable, so I decided not to
split them out into separate patches/series.

The patchset is partially based on an early version of the HW_TAGS
patchset by Vincenzo that had vmalloc support.  Thus, I added a
Co-developed-by tag into a few patches.

SW_TAGS vmalloc tagging support is straightforward.  It reuses all of the
generic KASAN machinery, but uses shadow memory to store tags instead of
magic values.  Naturally, vmalloc tagging requires adding a few
kasan_reset_tag() annotations to the vmalloc code.

HW_TAGS vmalloc tagging support stands out.  HW_TAGS KASAN is based on Arm
MTE, which can only assigns tags to physical memory.  As a result, HW_TAGS
KASAN only tags vmalloc() allocations, which are backed by page_alloc
memory.  It ignores vmap() and others.

This patch (of 39):

Currently, should_skip_kasan_poison() has two definitions: one for when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, one for when it's not.

Instead of duplicating the checks, add a deferred_pages_enabled() helper
and use it in a single should_skip_kasan_poison() definition.

Also move should_skip_kasan_poison() closer to its caller and clarify all
conditions in the comment.

Link: https://lkml.kernel.org/r/cover.1643047180.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/658b79f5fb305edaf7dc16bc52ea870d3220d4a8.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds two trace events for base page and HugeTLB page migrations.
These events, closely follow the implementation details like setting and
removing of PTE migration entries, which are essential operations for
migration.  The new CREATE_TRACE_POINTS in <mm/rmap.c> covers both
<events/migration.h> and <events/tlb.h> based trace events.  Hence drop
redundant CREATE_TRACE_POINTS from other places which could have otherwise
conflicted during build.

Link: https://lkml.kernel.org/r/1643368182-9588-3-git-send-email-anshuman.khandual@arm.comSigned-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/migration: Add trace events", v3.

This adds trace events for all migration scenarios including base page,
THP and HugeTLB.

This patch (of 3):

This adds two trace events for PMD based THP migration without split.
These events closely follow the implementation details like setting and
removing of PMD migration entries, which are essential operations for THP
migration.  This moves CREATE_TRACE_POINTS into generic THP from powerpc
for these new trace events to be available on other platforms as well.

Link: https://lkml.kernel.org/r/1643368182-9588-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1643368182-9588-2-git-send-email-anshuman.khandual@arm.comSigned-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NR_FILE_MAPPED accounting in mm/rmap.c (for /proc/meminfo "Mapped" and
/proc/vmstat "nr_mapped" and the memcg's memory.stat "mapped_file") is
slightly flawed for file or shmem huge pages.

It is well thought out, and looks convincing, but there's a racy case when
the careful counting in page_remove_file_rmap() (without page lock) gets
discarded.  So that in a workload like two "make -j20" kernel builds under
memory pressure, with cc1 on hugepage text, "Mapped" can easily grow by a
spurious 5MB or more on each iteration, ending up implausibly bigger than
most other numbers in /proc/meminfo.  And, hypothetically, might grow to
the point of seriously interfering in mm/vmscan.c's heuristics, which do
take NR_FILE_MAPPED into some consideration.

Fixed by moving the __mod_lruvec_page_state() down to where it will not be
missed before return (and I've grown a bit tired of that oft-repeated
but-not-everywhere comment on the __ness: it gets lost in the move here).

Does page_add_file_rmap() need the same change?  I suspect not, because
page lock is held in all relevant cases, and its skipping case looks safe;
but it's much easier to be sure, if we do make the same change.

Link: https://lkml.kernel.org/r/e02e52a1-8550-a57c-ed29-f51191ea2375@google.com
Fixes: dd78fedd ("rmap: support file thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page_mapcount_reset() when folio_mapped() while mapping_exiting() was
devised long before there were huge or compound pages in the cache.  It is
still valid for small pages, but not at all clear what's right to check
and reset on large pages.  Just don't try when folio_test_large().

Link: https://lkml.kernel.org/r/879c4426-4122-da9c-1a86-697f2c9a083@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The PG_waiters bit is not included in PAGE_FLAGS_CHECK_AT_FREE, and
vmscan.c's free_unref_page_list() callers rely on that not to generate
bad_page() alerts.  So __page_cache_release(), put_pages_list() and
release_pages() (and presumably copy-and-pasted free_zone_device_page())
are redundant and misleading to make a special point of clearing it (as
the "__" implies, it could only safely be used on the freeing path).

Delete __ClearPageWaiters().  Remark on this in one of the "possible"
comments in folio_wake_bit(), and delete the superfluous comments.

Link: https://lkml.kernel.org/r/3eafa969-5b1a-accf-88fe-318784c791a@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PAGE_SIZE is not 4096 in many configurations, particularly ppc64 uses 64K
pages in majority of cases.

Add helpers to detect PAGE_SIZE and PAGE_SHIFT dynamically.

Without this tests are broken w.r.t reading /proc/self/pagemap

    if (pread(pagemap_fd, ent, sizeof(ent),
              (uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent))
              err(2, "read pagemap");

Link: https://lkml.kernel.org/r/20220307054355.149820-2-aneesh.kumar@linux.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid code duplication by adding util.h.  No functional change in this
patch.

Link: https://lkml.kernel.org/r/20220307054355.149820-1-aneesh.kumar@linux.ibm.comSigned-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_init_poison is only used in core MM code, so unexport it.

Link: https://lkml.kernel.org/r/20220207063446.1833404-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When viewing page owner information, we may want to cull blocks of
information with our own rules.  So it is important to enhance culling
function to provide the support for customizing culling rules.
Therefore, following adjustments are made:

1. Add --cull option to support the culling of blocks of information
   with user-defined culling rules.

	./page_owner_sort <input> <output> --cull=<rules>
	./page_owner_sort <input> <output> --cull <rules>

  <rules> is a single argument in the form of a comma-separated list to
  specify individual culling rules, by the sequence of keys k1,k2, ....
  Mixed use of abbreviated and complete-form of keys is allowed.

  For reference, please see the document(Documentation/vm/page_owner.rst).

Now, assuming two blocks in the input file are as follows:

	Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo)
	PFN xxxx
	 prep_new_page+0xd0/0xf8
	 get_page_from_freelist+0x4a0/0x1290
	 __alloc_pages+0x168/0x340
	 alloc_pages+0xb0/0x158

	Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo)
	PFN xxxx
	 prep_new_page+0xd0/0xf8
	 get_page_from_freelist+0x4a0/0x1290
	 __alloc_pages+0x168/0x340
	 alloc_pages+0xb0/0x158

If we want to cull the blocks by stacktrace and task command name, we can
use this command:

	./page_owner_sort <input> <output> --cull=stacktrace,name

The output would be like:

	2 times, 2 pages, task_comm_name: task_name_demo
	 prep_new_page+0xd0/0xf8
	 get_page_from_freelist+0x4a0/0x1290
	 __alloc_pages+0x168/0x340
	 alloc_pages+0xb0/0x158

As we can see, these two blocks are culled successfully, for they share
the same pid and task command name.

However, if we want to cull the blocks by pid, stacktrace and task command
name, we can this command:

	./page_owner_sort <input> <output> --cull=stacktrace,name,pid

The output would be like:

	1 times, 1 pages, PID 1, task_comm_name: task_name_demo
	 prep_new_page+0xd0/0xf8
	 get_page_from_freelist+0x4a0/0x1290
	 __alloc_pages+0x168/0x340
	 alloc_pages+0xb0/0x158

	1 times, 1 pages, PID 32, task_comm_name: task_name_demo
	 prep_new_page+0xd0/0xf8
	 get_page_from_freelist+0x4a0/0x1290
	 __alloc_pages+0x168/0x340
	 alloc_pages+0xb0/0x158

As we can see, these two blocks are failed to cull, for their PIDs are
different.

2. Add explanations of --cull options to the document.

This work is coauthored by
	Yixuan Cao
	Shenghong Han
	Yinan Zhang
	Chongxi Zhao
	Yuhong Feng

Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When viewing page owner information, we may also need to select the blocks
by PID, TGID or task command name, which helps to get more accurate page
allocation information as needed.

Therefore, following adjustments are made:

1. Add three new options, including --pid, --tgid and --name, to support
   the selection of information blocks by a specific pid, tgid and task
   command name. In addtion, multiple options are allowed to be used at
   the same time.

	./page_owner_sort [input] [output] --pid <PID>
	./page_owner_sort [input] [output] --tgid <TGID>
	./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME>

   Assuming a scenario when a multi-threaded program, ./demo (PID =
   5280), is running, and ./demo creates a child process (PID = 5281).

	$ps
	PID   TTY        TIME   CMD
	5215  pts/0    00:00:00  bash
	5280  pts/0    00:00:00  ./demo
	5281  pts/0    00:00:00  ./demo
	5282  pts/0    00:00:00  ps

   It would be better to filter out the records with tgid=5280 and the
   task name "demo" when debugging the parent process, and the specific
   usage is

	./page_owner_sort [input] [output] --tgid 5280 --name demo

2. Add explanations of three new options, including --pid, --tgid and
   --name, to the document.

This work is coauthored by
	Shenghong Han <hanshenghong2019@email.szu.edu.cn>,
	Yixuan Cao <caoyixuan2019@email.szu.edu.cn>,
	Yinan Zhang <zhangyinan2019@email.szu.edu.cn>,
	Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>,
	Yuhong Feng <yuhongf@szu.edu.cn>.

Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When viewing page owner information, we may also need to the block to be
sorted by task command name.  Therefore, the following adjustments are
made:

1. Add a member variable to record task command name of block.

2. Add a new -n option to sort the information of blocks by task command
   name.

3. Add -n option explanation in the document.

Link: https://lkml.kernel.org/r/20220306030640.43054-2-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: <zhaochongxi2019@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following adjustments are made:

1. Instead of using another array to cull the blocks after sorting,
   reuse the old array.  So there is no need to malloc a new array.

2. When enabling '-f' option to filter out the blocks which have been
   released, only add those have not been released in the list, rather
   than add all of blocks in the list and then do the filtering when
   printing the result.

3. When enabling '-c' option to cull the blocks by comparing
   stacktrace, print the stacetrace rather than the total block.

Link: https://lkml.kernel.org/r/20220306030640.43054-1-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the "page owner" information is read, the information sorted
by TGID is expected.

As a result, the following adjustments have been made:

1. Add a new -P option to sort the information of blocks by TGID in
   ascending order.

2. Adjust the order of member variables in block_list strust to avoid
   one 4 byte hole.

3. Add -P option explanation in the document.

Link: https://lkml.kernel.org/r/20220301151438.166118-3-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a security check after using malloc() to allocate memory.

Link: https://lkml.kernel.org/r/20220301151438.166118-2-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two adjustments are made:

1. Correct a grammatical error: replace the "what" in "Do the job what
   you want to debug" with "that".

2. Replace "has not been" with "has been" in the description of the -f
   option: According to Commit b1c9ba071e7d ("tools/vm/page_owner_sort.c:
   fix the instructions for use"), the description of the "-f" option is
   "Filter out the information of blocks whose memory has been released."

Link: https://lkml.kernel.org/r/20220301151438.166118-1-yejiajian2018@email.szu.edu.cnSigned-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I noticed a discrepancy between the usage method and the code logic.

If we enable the -f option, it should be "Filter out the information of
blocks whose memory has been released".

Link: https://lkml.kernel.org/r/20220219143106.2805-1-caoyixuan2019@email.szu.edu.cnSigned-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In a single-threaded process, the pid in kernel task_struct is the same
as the tgid, which can mark the process of page allocation.  But in a
multithreaded process, only the task_struct of the thread leader has the
same pid as tgid, and the pids of other threads are different from tgid.
Therefore, tgid is recorded to provide effective information for
debugging and data statistics of multithreaded programs.

This can also be achieved by observing the task name (executable file
name) for a specific process.  However, when the same program is started
multiple times, the task name is the same and the tgid is different.
Therefore, in the debugging of multi-threaded programs, combined with
the task name and tgid, more accurate runtime information of a certain
run of the program can be obtained.

Link: https://lkml.kernel.org/r/20220219180450.2399-1-caoyixuan2019@email.szu.edu.cnSigned-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Waiman Long <longman@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page_owner information currently includes the pid of the calling
task.  That is useful as long as the task is still running.  Otherwise,
the number is meaningless.  To have more information about the
allocating tasks that had exited by the time the page_owner information
is retrieved, we need to store the command name of the task.

Add a new comm field into page_owner structure to store the command name
and display it when the page_owner information is retrieved.

Link: https://lkml.kernel.org/r/20220202203036.744010-5-longman@redhat.comSigned-off-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>