The reset date of the ST Micro version of PL031 is 2000-01-01.  The
correct weekday for 2000-01-01 is saturday, but pl031 is initialized to
sunday.  This may lead to alarm malfunction, so configure the correct
wday if RTC_DR indicates reset.
Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull slave-dmaengine fixes fromVinod Koul:
 "fixes of cylic dma usages in slave dma drivers"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: fix cyclic dma usage
  dmaengine: pl330: dont complete descriptor for cyclic dma

Pull last minute virtio fixes from Michael S. Tsirkin:
 "Here are a couple of last minute virtio fixes for 3.4.  Hope it's not
  too late yes - I might have tried too hard to make sure the fix is
  well tested.

  Fixes are by Amit and myself.  One fixes module removal and one
  suspend of a VM, the last one the handling of out of memory condition.

  They are thus very low risk as most people never hit these paths, but
  do fix very annoying problems for people that do use the feature.

  Signed-off-by: Michael S. Tsirkin <mst@redhat.com>"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_net: invoke softirqs after __napi_schedule
  virtio: balloon: let host know of updated balloon size before module removal
  virtio: console: tell host of open ports after resume from s3/s4

Pull ARM: SoC fixes from Olof Johansson:
 "I will stop trying to predict when we're done with fixes for a
  release.

  Here's another small batch of three patches for arm-soc:

   - A fix for a boot time WARN_ON() due to irq domain conversion on
     PRIMA2
   - Fix for a regression in Tegra SMP spinup code due to swapped
     register offsets
   - Fixed config dependency for mv_cesa crypto driver to avoid build
     breakage"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
  crypto: mv_cesa requires on CRYPTO_HASH to build
  ARM: tegra: Fix flow controller accesses

Pull two md fixes from NeilBrown:
 "One fixes a bug in the new raid10 resize code so is relevant to 3.4
  only.

  The other fixes a bug in the use of md by dm-raid, so is relevant to
  any kernel with dm-raid support"

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  MD: Add del_timer_sync to mddev_suspend (fix nasty panic)
  md/raid10: set dev_sectors properly when resizing devices in array.

Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf, x86 and scheduler updates from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing: Do not enable function event with enable
  perf stat: handle ENXIO error for perf_event_open
  perf: Turn off compiler warnings for flex and bison generated files
  perf stat: Fix case where guest/host monitoring is not supported by kernel
  perf build-id: Fix filename size calculation

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
  x86: Fix section annotation of acpi_map_cpu2node()
  x86/microcode: Ensure that module is only loaded on supported Intel CPUs

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption

__napi_schedule might raise softirq but nothing
causes do_softirq to trigger, so it does not in fact
run. As a result,
the error message "NOHZ: local_softirq_pending 08"
sometimes occurs during boot of a KVM guest when the network service is
started and we are oom:

  ...
  Bringing up loopback interface:  [  OK  ]
  Bringing up interface eth0:
  Determining IP information for eth0...NOHZ: local_softirq_pending 08
   done.
  [  OK  ]
  ...

Further, receive queue processing might get delayed
indefinitely until some interrupt triggers:
virtio_net expected napi to be run immediately.

One way to cause do_softirq to be executed is by
invoking local_bh_enable(). As __napi_schedule is
normally called from bh or irq context, this
seems to make sense: disable bh before __napi_schedule
and enable afterwards.

In fact it's a very complicated way of calling do_softirq(),
and works since this function is only used when we are not
in interrupt context.  It's not hot at all, in any ideal scenario.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Tested-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>

When the balloon module is removed, we deflate the balloon, reclaiming
all the pages that were given to the host.  However, we don't update the
config values for the new balloon size, resulting in the host showing
outdated balloon values.

The size update is done after each leak and fill operation, only the
module removal case was left out.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

If a port was open before going into one of the sleep states, the port
can continue normal operation after restore.  However, the host has to
be told that the guest side of the connection is open to restore
pre-suspend state.

This wasn't noticed so far due to a bug in qemu that was fixed recently
(which marked the guest-side connection as always open).

CC: stable@vger.kernel.org   # Only for 3.3
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

the old codes will cause 3.4 kernel warning as irq domain size is wrong:
------------[ cut here ]------------
WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48()
Modules linked in:
[<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64)
[<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24)
[<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48)
[<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120)
[<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0)
[<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34)
[<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74)
[<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34)
[<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158)
[<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80)
[<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190)
[<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190)
---[ end trace 1b75b31a2719ed32 ]---
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Use del_timer_sync to remove timer before mddev_suspend finishes.

We don't want a timer going off after an mddev_suspend is called.  This is
especially true with device-mapper, since it can call the destructor function
immediately following a suspend.  This results in the removal (kfree) of the
structures upon which the timer depends - resulting in a very ugly panic.
Therefore, we add a del_timer_sync to mddev_suspend to prevent this.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

raid10 stores dev_sectors in 'conf' separately from the one in
'mddev' because it can have a very significant effect on block
addressing and so need to be updated carefully.

However raid10_resize isn't updating it at all!

To update it correctly, we need to make sure it is a proper
multiple of the chunksize taking various details of the layout
in to account.
This calculation is currently done in setup_conf.   So split it
out from there and call it from raid10_resize as well.
Then set conf->dev_sectors properly.
Signed-off-by: NeilBrown <neilb@suse.de>

Pull kvm powerpc fixes from Marcelo Tosatti:
 "Urgent KVM PPC updates, quoting Alexander Graf:

    There are a few bugs in 3.4 that really should be fixed before
    people can be all happy and fuzzy about KVM on PowerPC.  These fixes
    are:

     * fix POWER7 bare metal with PR=y
     * fix deadlock on HV=y book3s_64 mode in low memory cases
     * fix invalid MMU scope of PR=y mode on book3s_64, possibly eading
       to memory corruption"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates
  powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM
  KVM: PPC: Book3S: PR: Fix hsrr code
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Book3S: PR: Handle EMUL_ASSIST

Pull sound fixes from Takashi Iwai:
 "A few last-minute regression fixes for 3.4 final kernel.  All trivial,
  and Cc'ed to stable kernel."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Fix AIF2ADC power down
  ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops
  ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB

Pull remoteproc fix from Ohad Ben-Cohen:
 "Fix a nasty off-by-one remoteproc bug which leaks memory when a remote
  processor is shut down and, on certain circumstances, can indirectly
  prevent it from being reloaded."

* tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix off-by-one bug in __rproc_free_vrings

Pull CIFS fix from Jeff Layton

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix misspelling of "forcedirectio"

Pull two Tile arch fixes from Chris Metcalf:
 "These are both bug-fixes, one to avoid some issues in how we invoke
  the "pending userspace work" flags on return to userspace, and the
  other to provide the same signal handler arguments for tilegx32 that
  we do for tilegx64."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: apply commit 74fca9da to the compat signal handling as well
  arch/tile: fix up some issues in calling do_work_pending()

Pull networking tree from David Miller:

1) ptp_pch driver build broke during this merge window due to missing
   slab.h header, fix from Geery Uytterhoeven.

2) If ipset passes in a bogus hash table size we crash because the size
   is not validated properly.  Compounding this, gcc-4.7 can miscompile
   ipset such that even when the user specifies legitimate parameters
   the tool passes in an out-of-range size to the kernel.

   Fix from Jozsef Kadlecsik.

3) Users have reported that the netdev watchdog can trigger with pch_gbe
   devices, and it turns out this is happening because of races in the
   TX path of the driver leading to the transmitter hanging.  Fix from
   Eric Dumazet, reported and tested by Andy Cress.

4) Novatel USB551L devices match the generic class entries for the cdc
   ethernet USB driver, but they don't work because they have generic
   descriptors and thus need FLAG_WWAN to function properly.

   Add the necessary ID table entry to fix this, from Dan Williams.

5) A recursive locking fix in the USBNET driver added a new problem, in
   that packet list traversal is now racy and we can thus access
   unlinked SKBs and crash.

   Avoid this situation by adding some extra state tracking, from Ming
   Lei.

6) The rtlwifi conversion to asynchronous firmware loading is racy, fix
   by reordering the probe procedure.  From Larry Finger.

   Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43187

7) Fix regressions with bluetooth keyboards by notifying userland
   properly when the security level changes, from Gustavo Padovan.

8) Bluetooth needs to make sure device connected events are emitted
   before other kinds of events, otherwise userspace will think there is
   no baseband link yet and therefore abort the sockets associated with
   that connection.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: ipset: fix hash size checking in kernel
  ptp_pch: Add missing #include <linux/slab.h>
  pch_gbe: fix transmit races
  cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN
  usbnet: fix skb traversing races during unlink(v2)
  Bluetooth: mgmt: Fix device_connected sending order
  Bluetooth: notify userspace of security level change
  rtlwifi: fix for race condition when firmware is cached

This passes siginfo and mcontext to tilegx32 signal handlers that
don't have SA_SIGINFO set just as we have been doing for tilegx64.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

First, we were at risk of handling thread-info flags, in particular
do_signal(), when returning from kernel space.  This could happen
after a failed kernel_execve(), or when forking a kernel thread.
The fix is to test in do_work_pending() for user_mode() and return
immediately if so; we already had this test for one of the flags,
so I just hoisted it to the top of the function.

Second, if a ptraced process updated the callee-saved registers
in the ptregs struct and then processed another thread-info flag, we
would overwrite the modifications with the original callee-saved
registers.  To fix this, we add a register to note if we've already
saved the registers once, and skip doing it on additional passes
through the loop.  To avoid a performance hit from the couple of
extra instructions involved, I modified the GET_THREAD_INFO() macro
to be guaranteed to be one instruction, then bundled it with adjacent
instructions, yielding an overall net savings.
Reported-By: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

The hash size must fit both into u32 (jhash) and the max value of
size_t. The missing checking could lead to kernel crash, bug reported
by Seblu.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp/ptp_pch.c: In function 'pch_remove':
drivers/ptp/ptp_pch.c:576:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
drivers/ptp/ptp_pch.c: In function 'pch_probe':
drivers/ptp/ptp_pch.c:587:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

...and add a "directio" synonym since that's what the manpage has
always advertised.
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Merge branch 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes

* 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Fix flow controller accesses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux:
  crypto: mv_cesa requires on CRYPTO_HASH to build
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When handling the H_BULK_REMOVE hypercall, we were forgetting to
invalidate and unlock the hashed page table entry (HPTE) in the case
where the page had been paged out.  This fixes it by clearing the
first doubleword of the HPTE in that case.

This fixes a regression introduced in commit a92bce95 ("KVM: PPC:
Book3S HV: Keep HPTE locked when invalidating").  The effect of the
regression is that the host kernel will sometimes hang when under
memory pressure.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

The code forgot to scramble the VSIDs the way we normally do
and was basically using the "proto VSID" directly with the MMU.

This means that in practice, KVM used random VSIDs that could
collide with segments used by other user space programs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[agraf: simplify ppc32 case]
Signed-off-by: Alexander Graf <agraf@suse.de>

When jumping back into the kernel to code that knows that it would be
using HSRR registers instead of SRR registers, we need to make sure we
pass it all information on where to jump to in HSRR registers.

Unfortunately, we used r10 to store the information to distinguish between
the HSRR and SRR case. That register got clobbered in between though,
rendering the later comparison invalid.

Instead, let's use cr1 to store this information. That way we don't
need yet another register and everyone's happy.

This fixes PR KVM on POWER7 bare metal for me.
Signed-off-by: Alexander Graf <agraf@suse.de>

When running on a system that is HV capable, some interrupts use HSRR
SPRs instead of the normal SRR SPRs. These are also used in the Linux
handlers to jump back to code after an interrupt got processed.

Unfortunately, in our "jump back to the real host handler after we've
done the context switch" code, we were only setting the SRR SPRs,
rendering Linux to jump back to some invalid IP after it's processed
the interrupt.

This fixes random crashes on p7 opal mode with PR KVM for me.
Signed-off-by: Alexander Graf <agraf@suse.de>

In addition to normal "priviledged instruction" traps, we can also receive
"emulation assist" traps on newer hardware that has the HV bit set.

Handle that one the same way as a privileged instruction, including the
instruction fetching. That way we don't execute old instructions that we
happen to still leave in that field when an emul assist trap comes.

This fixes -M mac99 / -M g3beige on p7 bare metal for me.
Signed-off-by: Alexander Graf <agraf@suse.de>

John Linville says:

Here are three more fixes that some of my developers are desperate to
see included in 3.4...

Johan Hedberg went to some length justifyng the inclusion of these two
Bluetooth fixes:

"The device_connected fix should be quite self-explanatory, but it's
actually a wider issue than just for keyboards. All profiles that do
incoming connection authorization (e.g. headsets) will break without it
with specific hardware. The reason it wasn't caught earlier is that it
only occurs with specific Bluetooth adapters.

As for the security level patch, this fixes L2CAP socket based security
level elevation during a connection. The HID profile needs this (for
keyboards) and it is the only way to achieve the security level
elevation when using the management interface to talk to the kernel
(hence the management enabling patch being the one that exposes this"

The rtlwifi fix addresses a regression related to firmware loading,
as described in kernel.org bug 43187.  It basically just moves a hunk
of code to a more appropriate place.
Signed-off-by: David S. Miller <davem@davemloft.net>

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-and-Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-and-Tested-by: Tobias Ulmer <tobiasu@tmux.org>
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

ASoC: Last minute fixes

Some last minute fixes for ASoC.  Small, focused changes to specific
drivers.

Andy reported pch_gbe triggered "NETDEV WATCHDOG" errors.

May 11 11:06:09 kontron kernel: WARNING: at net/sched/sch_generic.c:261
dev_watchdog+0x1ec/0x200() (Not tainted)
May 11 11:06:09 kontron kernel: Hardware name: N/A
May 11 11:06:09 kontron kernel: NETDEV WATCHDOG: eth0 (pch_gbe):
transmit queue 0 timed out

It seems pch_gbe has a racy tx path (races with TX completion path)

Remove tx_queue_lock lock since it has no purpose, we must use tx_lock
instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andy Cress <andy.cress@us.kontron.com>
Tested-by: Andy Cress <andy.cress@us.kontron.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needs to be tagged with FLAG_WWAN, which since it has generic
descriptors, won't happen if we don't override the generic
driver info.

Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4231d47e(net/usbnet: avoid
recursive locking in usbnet_stop()) fixes the recursive locking
problem by releasing the skb queue lock before unlink, but may
cause skb traversing races:
	- after URB is unlinked and the queue lock is released,
	the refered skb and skb->next may be moved to done queue,
	even be released
	- in skb_queue_walk_safe, the next skb is still obtained
	by next pointer of the last skb
	- so maybe trigger oops or other problems

This patch extends the usage of entry->state to describe 'start_unlink'
state, so always holding the queue(rx/tx) lock to change the state if
the referd skb is in rx or tx queue because we need to know if the
refered urb has been started unlinking in unlink_urbs.

The other part of this patch is based on Huajun's patch:
always traverse from head of the tx/rx queue to get skb which is
to be unlinked but not been started unlinking.
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Export handle_edge_irq() and irq_to_desc() to modules to allow them to
do things such as

	__irq_set_handler_locked(...., handle_edge_irq);

This fixes

	ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined!
	ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined!

when gpio-pch is being built as a module.

This was introduced by commit df9541a6 ("gpio: pch9: Use proper flow
type handlers") that added

	__irq_set_handler_locked(d->irq, handle_edge_irq);

but handle_edge_irq() was not exported for modules (and inlined
__irq_set_handler_locked() requires irq_to_desc() exported as well)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>