- 11 Sep, 2018 4 commits
-
-
Christian König authored
Allows us to avoid taking the spinlock in more places. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
amdgpu_vm_bo_* functions should come much later. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
For under voltage, negative value will be applied to voltage offset. Update the data type to cover this case. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Added vega20 overdrive support based on existing OD sysfs APIs. However, the OD logics are simplified on vega20. So, the behavior will be a little different and works only on some limited levels. V2: fix typo fix commit description revise error logs add support for clock OD V3: separate clock from voltage OD settings Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 02 Sep, 2018 8 commits
-
-
Alex Deucher authored
Vega20 does not appear to be affected by the same issue as vega10. Enable the full stolen memory handling on vega20. Reserve the appropriate size at init time to avoid display artifacts and then free it at the end of init once the new FB is up and running. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
vega12 does not appear to be affected by the same issue as vega10. Enable the full stolen memory handling on vega12. Reserve the appropriate size at init time to avoid display artifacts and then free it at the end of init once the new FB is up and running. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Raven does not appear to be affected by the same issue as vega10. Enable the full stolen memory handling on Raven. Reserve the appropriate size at init time to avoid display artifacts and then free it at the end of init once the new FB is up and running. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=106639Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
No functional change, just rework it in order to adjust the behavior on a per asic level. The problem is that on vega10, something corrupts the lower 8 MB of vram on the second resume from S3. This does not seem to affect Raven, other gmc9 based asics need testing. Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Add BOs to the idle state again and correctly clear the flag when new BOs are added. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
First step to fix the LRU corruption, we accidentially tried to move things on the LRU after dropping the lock. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Staring at the function for six hours, just to essentially move one line of code. The problem was that the first list_cut_position call could result in list2 pointing to la-la-land. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Andrey Grodzovsky authored
This at least allows to fail any subsequent IOCTLs with -ENODEV after the device is gone. Still this operation is not supported yet in graphic mode and will lead at least to page faults and other issues. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 30 Aug, 2018 2 commits
-
-
Christian König authored
This reverts commit a7f91061. Felix pointed out that we need to have the BOs mapped even before amdgpu_vm_update_directories is called. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Always try to put the GART away from where VRAM is. v2: correctly handle the 4GB limitation Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 29 Aug, 2018 13 commits
-
-
Alex Deucher authored
This caused a confusing error message, but there is functionally no problem since the default method is DIRECT. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Amber Lin authored
Move some KFD-related (but used in amdgpu_drv.c) definitions from kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but MMU_NOTIFIER is not. This patch also disables KFD-related module options when HSA_AMD is not enabled. v2: rebase (Alex) Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Philip Yang authored
kvmalloc_array uses __GFP_ZERO flag ensures that the returned address is zeroed already, memset it to zero again afterwards is unnecessary, and in this case buggy because we only clear the first entry. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Michel Dänzer authored
The first parameter of list_cut_position() must point to an initialized list. Noticed thanks to KASAN pointing out something's fishy here. Fixes: "drm/ttm: add bulk move function on LRU" Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Instead of the larger one use the smaller hole in the MC address space for the GART mappings. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Michel Dänzer authored
This reverts commit 31625ccae4464b61ec8cdb9740df848bbc857a5b. It triggered various badness on my development machine when running the piglit gpu profile with radeonsi on Bonaire, looks like memory corruption due to insufficiently protected list manipulations. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Most of the time we only need to know if the BO has a valid GMC addr. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Further separate GART and GTT domain. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Improve the VCE limitation handling. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Move that into amdgpu_gmc.c since we are really deadling with GMC address space here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Oak Zeng authored
For compute vm acquired from amdgpu, vm.pasid is managed by kfd. Decouple pasid from such vm on process destroy to avoid duplicate pasid release. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Oak Zeng authored
To make a amdgpu vm to a compute vm, the old pasid will be freed and replaced with a pasid managed by kfd. Kfd can't reuse original pasid allocated by amdgpu because kfd uses different pasid policy with amdgpu. For example, all graphic devices share one same pasid in a process. v2: rebase (Alex) Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 28 Aug, 2018 7 commits
-
-
Michel Dänzer authored
Doing it earlier hits a WARN_ON_ONCE in amdgpu_bo_gpu_offset. Fixes: "drm/amdgpu: remove gart.table_addr" Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Emily Deng authored
Fix the VMC page fault when the running sequence is as below: 1.amdgpu_gem_create_ioctl 2.ttm_bo_swapout->amdgpu_vm_bo_invalidate, as not called amdgpu_vm_bo_base_init, so won't called list_add_tail(&base->bo_list, &bo->va). Even the bo was evicted, it won't set the bo_base->moved. 3.drm_gem_open_ioctl->amdgpu_vm_bo_base_init, here only called list_move_tail(&base->vm_status, &vm->evicted), but not set the bo_base->moved. 4.amdgpu_vm_bo_map->amdgpu_vm_bo_insert_map, as the bo_base->moved is not set true, the function amdgpu_vm_bo_insert_map will call list_move(&bo_va->base.vm_status, &vm->moved) 5.amdgpu_cs_ioctl won't validate the swapout bo, as it is only in the moved list, not in the evict list. So VMC page fault occurs. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yintian Tao authored
It will be more safe to make full-acess include both phase1 and phase2. Then accessing special registeris wherever at phase1 or phase2 will not block any shutdown and suspend process under virtualization. Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Looks like a copy&paste error to me. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Amber Lin authored
After merging KFD into amdgpu, move module parameters defined in KFD to amdgpu_drv.c, where other module parameters are declared. v2: add kernel-doc comments v3: rebase and fix parameter variable name (Alex) Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Amber Lin authored
After amdkfd is merged to amdgpu, CONFIG_HSA_AMD_MODULE no longer exists. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Amber Lin authored
Since KFD is only supported by single GPU driver, it makes sense to merge amdgpu and amdkfd into one module. This patch is the initial step: merge Kconfig and Makefile. v2: also remove kfd from drm Kconfig Signed-off-by: Amber Lin <Amber.Lin@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 27 Aug, 2018 6 commits
-
-
Andrey Grodzovsky authored
The fault reports the page number where the fault happend and not the exact faulty address. Update the print message to reflect that. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
David Francis authored
[Why] The dce_i2c_hw code contained four funtcions that were only called in one place and did not have a clearly delineated purpose. [How] Inline these functions, keeping the same functionality. This is not a functional change. The functions disable_i2c_hw_engine and release_engine_dce_hw were pulled into their respective callers. The most interesting part of this change is the acquire functions. dce_i2c_hw_engine_acquire_engine was pulled into dce_i2c_engine_acquire_hw, and dce_i2c_engine_acquire_hw was pulled into acquire_i2c_hw_engine. Some notes to show that this change is not functional: -Failure conditions in any function resulted in a cascade of calls that ended in a 'return NULL'. Those are replaced with a direct 'return NULL'. -The variable result is the one from dce_i2c_hw_engine_acquire_engine. The boolean result used as part of return logic was removed. -As the second half of dce_i2c_hw_engine_acquire_engine is only executed if that function is returning true and therefore exiting the do-while loop in dce_i2c_engine_acquire_hw, those lines were moved outside of the loop. Signed-off-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Eric Yang authored
[Why] On PCO and up, whenever SMU receive message to indicate active display count = 0. SMU will turn off 48MHZ TMDP reference clock by writing to 1 TMDP_48M_Refclk_Driver_PWDN. Once this clock is off, no PHY register will respond to register access. This means our current sequence of notifying display count along with requesting clock will cause driver to hang when accessing PHY registers after displays count goes to 0. [How] Separate the PPSMC_MSG_SetDisplayCount message from the SMU messages that request clocks, have display own sequencing of this message so that we can send it at the appropriate time. Do not redundantly power off HW when entering S3, S4, since display should already be called to disable all streams. And ASIC soon be powered down. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
David Francis authored
[Why] The i2c code contains two structs that contain the same information as i2c_payload [How] Replace references to those structs with references to i2c_payload dce_i2c_transaction_request->status was written to but never read, so all references to it are removed Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] Logging hardware state can be done by triggering a write to the debugfs file. It would also be useful to be able to read the hardware state from the debugfs file to be able to generate a clean log without timestamps. [How] Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log Threading is an obvious concern when dealing with multiple debugfs operations and blocking on global state in dm or dc seems unfavorable. Adding an extra parameter for the debugfs log context state is the implementation done here. Existing code that made use of DTN_INFO and its associated macros needed to be refactored to support this. We don't know the size of the log in advance so it reallocates the log string dynamically. Once the log has been generated it's copied into the user supplied buffer for the debugfs. This allows for seeking support but it's worth nothing that unlike triggering output via dmesg the hardware state might change in-between reads if your buffer size is too small. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
David Francis authored
[Why] Good spelling and grammar makes comments more pleasant and clearer. Linux has coding standards for comments that we should try to follow. [How] Fix obvious spelling and grammar issues Ensure all comments use '/*' and '*/' and multi-line comments follow linux convention Remove line-of-stars comments that do not separate sections of code and comments referring to lines of code that have since been removed Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-