- 25 Jun, 2020 40 commits
-
-
Dafna Hirschfeld authored
[ Upstream commit d7faa8ff ] In function rockchip_dt_node_to_map, a new_map variable is allocated by: new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), GFP_KERNEL); This uses devres and attaches new_map to the pinctrl driver. This cause a leak since new_map is not released when the probed driver is removed. Fix it by using kcalloc to allocate new_map and free it in `rockchip_dt_free_map` Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Suganath Prabu S authored
[ Upstream commit cbbfdb2a ] Fix following warning from Smatch static analyser: drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit c32ea07a ] Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed Fixes: 1502cfe1 ("smb347-charger: Fix battery status reporting logic for charger faults") Tested-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 934ed384 ] In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless. Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Viacheslav Dubeyko authored
[ Upstream commit f839544c ] Currently, FC target reset finishes with the warning message: [84010.596893] ------------[ cut here ]------------ [84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm [84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [84010.597001] Supported: Yes, External [84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1 [84010.597006] task: c000000a104c0000 task.stack: c000000b52188000 [84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0 [84010.597008] REGS: c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default) [84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> [84010.597015] CR: 48242424 XER: 00000000 [84010.597016] CFAR: d00000001ff45d08 SOFTE: 1 GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102 GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000 GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818 GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0 GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000 GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70 GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080 GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8 [84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] [84010.597051] Call Trace: [84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable) [84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx] [84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs] [84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0 [84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220 [84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110 [84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130 [84010.597080] Instruction dump: [84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78 [84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180 [84010.597090] ---[ end trace e32abaf6e6fee826 ]--- To reproduce: echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable SYSTEM START kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0 <...> kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0 echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 kernel: -----------[ cut here ]----------- kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx] The issue happens because no real ISP reset is executed. The qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that vha->flags.online will be not zero for ISP reset procedure. This patch sets vha->flags.online to 1 before calling ->abort_isp() for starting the ISP reset. Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Viacheslav Dubeyko <v.dubeiko@yadro.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 66ff14e5 ] 7d715a6c ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.comSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Andrew Murray authored
[ Upstream commit 2b9f2174 ] The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between a CPU address (which is determined by the window number 'x') and a programmed PCI address - Thus allowing the controller to translate CPU accesses into PCI accesses. However the existing code incorrectly writes the CPU address - lets fix this by writing the PCI address instead. For memory transactions, existing DT users describe a 1:1 identity mapping and thus this change should have no effect. However the same isn't true for I/O. Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com Fixes: c25da477 ("PCI: rcar: Add Renesas R-Car PCIe driver") Tested-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by:
Andrew Murray <andrew.murray@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
-
Kuppuswamy Sathyanarayanan authored
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish [ Upstream commit 388bcc6e ] If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception. So check the return value before attempting the spin lock. One such example is below: For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue. [ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed. Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
John Stultz authored
[ Upstream commit 8508f4cb ] Valentine reported seeing: [ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock. Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console. This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive. Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning. Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Reported-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-and-tested-by:
-
Russell King authored
[ Upstream commit 88b73ee7 ] The IRQ log output is supposed to appear on a single line. However, commit 3a2dc167 ("i2c: pxa: Update debug function to dump more info on error") resulted in it being printed one-entry-per-line, which is excessively long. Fixing this is not a trivial matter; using pr_cont() doesn't work as the previous dev_dbg() may not have been compiled in, or may be dynamic. Since the rest of this function output is at error level, and is also debug output, promote this to error level as well to avoid this problem. Reduce the number of always zero prefix digits to save screen real- estate. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit bca71898 ] If we fails somewhere in 'v3_pci_probe()', we need to free 'host'. Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver. Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr Fixes: 68a15eb7 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by:
-
Matej Dujava authored
[ Upstream commit fa901333 ] Switch statement does not contain all cases: 8, 16, 24, 32. This patch will add missing one (24) Fixes: 81dee67e ("staging: sm750fb: add sm750 to staging") Signed-off-by:
Matej Dujava <mdujava@kocurkovo.cz> Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.czSigned-off-by:
-
Thinh Nguyen authored
[ Upstream commit 8d99087c ] If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we should properly end an active transfer and give back all the started requests. However if it's for an isoc endpoint, the failure maybe due to bus-expiry status. In this case, don't give back the requests and wait for the next retry. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 7440f518 ] On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit b58c6630 ] Get drvdata directly from parent instead of ngd dev, as ngd dev can probe defer and previously set drvdata will become null. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Raghavendra Rao Ananta authored
[ Upstream commit e2bd1dcb ] Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead. The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX. For example: $ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 & Signed-off-by:
Raghavendra Rao Ananta <rananta@codeaurora.org> Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.orgSigned-off-by:
-
Julian Wiedmann authored
[ Upstream commit 75e82bec ] qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available. Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 5b6cc38f ] The linked list entry from FIFO is peeked at queue_pending_output_urbs() but the actual element pop-out is performed outside the spinlock, and it's potentially racy. Do delete the link at the right place inside the spinlock. Fixes: 8fdff6a3 ("ALSA: snd-usb: implement new endpoint streaming model") Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alexander Tsoy authored
[ Upstream commit f0bd62b6 ] For computation of the the next frame size current value of fs/fps and accumulated fractional parts of fs/fps are used, where values are stored in Q16.16 format. This is quite natural for computing frame size for asynchronous endpoints driven by explicit feedback, since in this case fs/fps is a value provided by the feedback endpoint and it's already in the Q format. If an error is accumulated over time, the device can adjust fs/fps value to prevent buffer overruns/underruns. But for synchronous endpoints the accuracy provided by these computations is not enough. Due to accumulated error the driver periodically produces frames with incorrect size (+/- 1 audio sample). This patch fixes this issue by implementing a different algorithm for frame size computation. It is based on accumulating of the remainders from division fs/fps and it doesn't accumulate errors over time. This new method is enabled for synchronous and adaptive playback endpoints. Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.meSigned-off-by:
-
Xiyu Yang authored
[ Upstream commit e3436ce6 ] gasket_sysfs_register_store() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_register_store() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of gasket_sysfs_register_store(). When gasket_dev is NULL, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when gasket_dev is NULL. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
Xiyu Yang authored
[ Upstream commit 57a66838 ] gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute. Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 459b1f86 ] As far as the device is concerned the dma address is the physical address. There is no need to convert it to a physical address, especially not using dma-direct internals that are not available to drivers and which will interact badly with IOMMUs. Last but not least the commit introducing it claimed to just fix a type issue, but actually changed behavior. Fixes: 6e37ccf7 ("firmware: qcom_scm: Use proper types for dma mappings") Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200414123136.441454-1-hch@lst.deSigned-off-by:
-
Jason Yan authored
[ Upstream commit 4b4e8e93 ] The rza1l_swio_entries referred to the wrong array rza1h_swio_pins, which was intended to be rza1l_swio_pins. So let's fix it. This is detected by the following gcc warning: drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’ defined but not used [-Wunused-const-variable=] static const struct rza1_swio_pin rza1l_swio_pins[] = { ^~~~~~~~~~~~~~~ Fixes: 039bc58e ("pinctrl: rza1: Add support for RZ/A1L") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200417111604.19143-1-yanaijie@huawei.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Chad Dupuis authored
[ Upstream commit ad40f525 ] The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.comSigned-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit c58220cb ] The commit 3d2613c4 ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") introduced a use of the platform driver but missed to add the following line to it: MODULE_ALIAS("platform:gpio-dwapb"); Add this to get driver loaded automatically if platform device is registered. Fixes: 3d2613c4 ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
-
Vincent Stehlé authored
[ Upstream commit 34b6826d ] The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low. This has been verified on a board and in the schematics [1]. [1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents Fixes: 8b8061fc ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Nilesh Javali authored
[ Upstream commit 927527ae ] For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero. ------------[ cut here ]------------ WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0 : Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020 RIP: 0010:__flush_work+0x1c1/0x1d0 Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f 00 31 f6 RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282 RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898 RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001 R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000 R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00 FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? class_create_release+0x40/0x40 ? klist_put+0x2c/0x80 qedi_ep_disconnect+0xdd/0x400 [qedi] iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi] iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi] ? __netlink_lookup+0xe7/0x160 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1e2/0x240 ? copy_msghdr_from_user+0xd9/0x160 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0xa2/0xe0 ? hrtimer_try_to_cancel+0x25/0x100 ? do_nanosleep+0x9c/0x170 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f65f6f16107 Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8 0 00 00 00 00 53 48 89 f3 48 RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107 RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003 RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0 R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000 ---[ end trace 54f499c05d41f8bb ]--- Only flush if the connection endpoint state if different from OFLDCONN_NONE. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Hsin-Yi Wang authored
[ Upstream commit 72b29215 ] Fixing several unit name warnings: Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000" Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000" Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20200210063523.133333-4-hsinyi@chromium.org [mb: drop fixes for '_' in property name] Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Chen Zhou authored
[ Upstream commit 9bb086e5 ] In gb_lights_light_config(), 'light->name' is allocated by kstrndup(). It returns NULL when fails, add check for it. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Acked-by:
Rui Miguel Silva <rmfrfs@gmail.com> Link: https://lore.kernel.org/r/20200401030017.100274-1-chenzhou10@huawei.comSigned-off-by:
-
Hans de Goede authored
[ Upstream commit e2ac07c0 ] Since the purgatory is a special stand-alone binary, various profiling and sanitizing options must be disabled. Having these options enabled typically will cause dependencies on various special symbols exported by special libs / stubs used by these frameworks. Since the purgatory is special, it is not linked against these stubs causing missing symbols in the purgatory if these options are not disabled. Sync the set of disabled profiling and sanitizing options with that from drivers/firmware/efi/libstub/Makefile, adding -DDISABLE_BRANCH_PROFILING to the CFLAGS and setting: GCOV_PROFILE := n UBSAN_SANITIZE := n This fixes broken references to ftrace_likely_update() when CONFIG_TRACE_BRANCH_PROFILING is enabled and to __gcov_init() and __gcov_exit() when CONFIG_GCOV_KERNEL is enabled. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200317130841.290418-1-hdegoede@redhat.comSigned-off-by:
-
John Johansen authored
[ Upstream commit 3ed4aaa9 ] The subset test is not taking into account the unconfined exception which will cause profile transitions in the stacked confinement case to fail when no_new_privs is applied. This fixes a regression introduced in the fix for https://bugs.launchpad.net/bugs/1839037 BugLink: https://bugs.launchpad.net/bugs/1844186Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 4919b33b ] The adapter info MAD is used to send the client info and receive the host info as a response. A persistent buffer is used and as such the client info is overwritten after the response. During the course of a normal adapter reset the client info is refreshed in the buffer in preparation for sending the adapter info MAD. However, in the special case of LPM where we reenable the CRQ instead of a full CRQ teardown and reset we fail to refresh the client info in the adapter info buffer. As a result, after Live Partition Migration (LPM) we erroneously report the host's info as our own. [mkp: typos] Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.comSigned-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Simon Arlott authored
[ Upstream commit 6555781b ] If the cdrom fails to be registered then the device minor should be deallocated. Link: https://lore.kernel.org/r/072dac4b-8402-4de8-36bd-47e7588969cd@0882a8b5-c6c3-11e9-b005-00805fc181feSigned-off-by:
Simon Arlott <simon@octiron.net> Signed-off-by:
-
Pavel Machek (CIP) authored
[ Upstream commit 3b8a299a ] free_irq() is missing in case of error, fix that. Signed-off-by:
Pavel Machek (CIP) <pavel@denx.de> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200606153103.GA17905@amdSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mauricio Faria de Oliveira authored
[ Upstream commit 3b646abc ] Currently apparmor_sk_clone_security() does not check for existing label/peer in the 'new' struct sock; it just overwrites it, if any (with another reference to the label of the source sock.) static void apparmor_sk_clone_security(const struct sock *sk, struct sock *newsk) { struct aa_sk_ctx *ctx = SK_CTX(sk); struct aa_sk_ctx *new = SK_CTX(newsk); new->label = aa_get_label(ctx->label); new->peer = aa_get_label(ctx->peer); } This might leak label references, which might overflow under load. Thus, check for and put labels, to prevent such errors. Note this is similarly done on: static int apparmor_socket_post_create(struct socket *sock, ...) ... if (sock->sk) { struct aa_sk_ctx *ctx = SK_CTX(sock->sk); aa_put_label(ctx->label); ctx->label = aa_get_label(label); } ... Context: ------- The label reference count leak is observed if apparmor_sock_graft() is called previously: this sets the 'ctx->label' field by getting a reference to the current label (later overwritten, without put.) static void apparmor_sock_graft(struct sock *sk, ...) { struct aa_sk_ctx *ctx = SK_CTX(sk); if (!ctx->label) ctx->label = aa_get_current_label(); } And that is the case on crypto/af_alg.c:af_alg_accept(): int af_alg_accept(struct sock *sk, struct socket *newsock, ...) ... struct sock *sk2; ... sk2 = sk_alloc(...); ... security_sock_graft(sk2, newsock); security_sk_clone(sk, sk2); ... Apparently both calls are done on their own right, especially for other LSMs, being introduced in 2010/2014, before apparmor socket mediation in 2017 (see commits [1,2,3,4]). So, it looks OK there! Let's fix the reference leak in apparmor. Test-case: --------- Exercise that code path enough to overflow label reference count. $ cat aa-refcnt-af_alg.c #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <linux/if_alg.h> int main() { int sockfd; struct sockaddr_alg sa; /* Setup the crypto API socket */ sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0); if (sockfd < 0) { perror("socket"); return 1; } memset(&sa, 0, sizeof(sa)); sa.salg_family = AF_ALG; strcpy((char *) sa.salg_type, "rng"); strcpy((char *) sa.salg_name, "stdrng"); if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) { perror("bind"); return 1; } /* Accept a "connection" and close it; repeat. */ while (!close(accept(sockfd, NULL, 0))); return 0; } $ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c $ ./aa-refcnt-af_alg <a few hours later> [ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000 ... [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70 ... [ 9928.514286] security_sk_clone+0x33/0x50 [ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg] [ 9928.516091] alg_accept+0x15/0x20 [af_alg] [ 9928.516682] SYSC_accept4+0xff/0x210 [ 9928.519609] SyS_accept+0x10/0x20 [ 9928.520190] do_syscall_64+0x73/0x130 [ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Note that other messages may be seen, not just overflow, depending on the value being incremented by kref_get(); on another run: [ 7273.182666] refcount_t: saturated; leaking memory. ... [ 7273.185789] refcount_t: underflow; use-after-free. Kprobes: ------- Using kprobe events to monitor sk -> sk_security -> label -> count (kref): Original v5.7 (one reference leak every iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6 Patched v5.7 (zero reference leak per iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 Commits: ------- [1] commit 507cad35 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets") [2] commit 4c63f83c ("crypto: af_alg - properly label AF_ALG socket") [3] commit 2acce6aa ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning) [4] commit 56974a6f ("apparmor: add base infastructure for socket mediation") Fixes: 56974a6f ("apparmor: add base infastructure for socket mediation") Reported-by:
Brian Moyles <bmoyles@netflix.com> Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
John Johansen authored
[ Upstream commit dd2569fb ] Fix two issues with introspecting the task mode. 1. If a task is attached to a unconfined profile that is not the ns->unconfined profile then. Mode the mode is always reported as - $ ps -Z LABEL PID TTY TIME CMD unconfined 1287 pts/0 00:00:01 bash test (-) 1892 pts/0 00:00:00 ps instead of the correct value of (unconfined) as shown below $ ps -Z LABEL PID TTY TIME CMD unconfined 2483 pts/0 00:00:01 bash test (unconfined) 3591 pts/0 00:00:00 ps 2. if a task is confined by a stack of profiles that are unconfined the output of label mode is again the incorrect value of (-) like above, instead of (unconfined). This is because the visibile profile count increment is skipped by the special casing of unconfined. Fixes: f1bd9041 ("apparmor: add the base fns() for domain labels") Signed-off-by:
-
ashimida authored
[ Upstream commit 72d24acc ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e98 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by:
ashimida <ashimida@linux.alibaba.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit fc8b086d ] When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed. When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed. Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible. Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side. Fixes: 1e530119 ("NTB: Add indexed ports NTB API") Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Acked-by:
Allen Hubbe <allenbh@gmail.com> Tested-by:
Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit ca93c457 ] This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry. Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand. Fixes: c7aeb0af ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by:
-
Wang Hai authored
[ Upstream commit 98749b71 ] If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
