Add new algorithm mode for AEAD:
CCM(AES), GCM(AES), CCM(SM4), GCM(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In curve25519_mod_init() the curve25519_alg will be registered only when
(X86_FEATURE_BMI2 && X86_FEATURE_ADX). But in curve25519_mod_exit()
it still checks (X86_FEATURE_BMI2 || X86_FEATURE_ADX) when do crypto
unregister. This will trigger a BUG_ON in crypto_unregister_alg() as
alg->cra_refcnt is 0 if the cpu only supports one of X86_FEATURE_BMI2
and X86_FEATURE_ADX.

Fixes: 07b586fe ("crypto: x86/curve25519 - replace with formally verified implementation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 1339a7c3 ("crypto: qce: skcipher: Fix incorrect sg count for dma transfers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add myself as maintainer of gemini sl3516-ce crypto driver.
Add also the driver to the list of files for gemini SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The cortina/gemini SL3516 SoC has a crypto IP name either (crypto
engine/crypto acceleration engine in the datasheet).
It support many algorithms like [AES|DES|3DES][ECB|CBC], SHA1, MD5 and
some HMAC.

This patch adds the core files and support for ecb(aes) and the RNG.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds documentation for Device-Tree bindings for the
SL3516-ce cryptographic offloader driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: 604c3103 ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.

Fixes: 5155e118 ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch updates the reset flow based on PF/VF communications. VFs
will be stopped after receiving reset message from PF, and wait for
reset finish to restart VFs.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds 'ping_all_vfs' callback that supports pf send message to
all vfs and 'ping_pf' callback that supports vf send message to pf. After
receiving the interrupt, the communication destination gets the message
by sending mailbox.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 hardware supports the communication between PF and VFs.

This patch enables communication between PF and VFs by writing hardware
registers, and requests an irq for communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 hardware supports PF/VF communications. When the device is
reset, PF can send message to VF to stop function and restart function.

This patch adjusts the reset interface to support sending message through
PF/VF communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Register ecdh NIST P384 curve and add the tfm initialization.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The result of gx modulo p is zero if gx is equal to p, so return
error immediately if gx is equal to p.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the key length is zero, use stdrng to generate private key
to pass the crypto ecdh-nist-p256 self test on vector 2.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixup the 3des algorithm  minimum key size declaration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add fallback tfm supporting for hisi_sec driver. Due to the hardware
not supports 192bit key length when using XTS mode. So the driver needs
to setting the soft fallback skcipher tfm for user.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add new skcipher algorithms for Kunpeng930 SEC:
OFB(AES), CFB(AES), CTR(AES),
OFB(SM4), CFB(SM4), CTR(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Due to Kunpeng930 adds new SQE data structure, the SEC driver needs
to be upgraded. It mainly includes bd parsing process and bd filling
process.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add new type of sqe for Kunpeng930, which is the next generation
of SEC accelerator hardware. The hardware adds a new SQE data
structure.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adds master enable (ME) interrupt handler in PF. Upon
receiving ME interrupt for a VF, PF clears it's transaction
pending bit.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CPT result format had changed for CN10K HW to accommodate more
fields. This patch adds support to use new result format and
new LMTST lines for CPT operations on CN10K platform.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On CN10K platform transmit/receive buffer alloc and free from/to
hardware had changed to support burst operation. Whereas pervious
silicon's only support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used to send CPT commands to HW.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB
based on number of LMTLINES configured.

This patch adds support for mapping of PF/VF LMTST region.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Mailbox region configuration has some changes on CN10K platform
from OcteonTX2(CN9XX) platform.

On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.

On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.

This patch changes mbox initialization to support both CN9XX and CN10K
platform.
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This makes the IXP4xx driver probe from the device tree
and retrieve the NPE and two queue manager handled used
to process crypto from the device tree.

As the crypto engine is topologically a part of the NPE
hardware, we augment the NPE driver to spawn the
crypto engine as a child.

The platform data probe path is going away in due time,
for now it is an isolated else clause.

Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This adds device tree bindings for the ixp4xx crypto engine.

Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.

Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.

This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.

Cc: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace open coded divisor calculations with the DIV_ROUND_UP kernel
macro for better readability.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use memdup_user_nul() helper instead of open-coding to
simplify the code.

v1-->v2:
   fixed patch title error
v2-->v3:
   return the actual error
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.

This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Compared with Kunpeng920, Kunpeng930 adds MSI configuration steps to wait
for the interrupt to be emptied. In order to be compatible with the
kunpeng920 driver, 'set_msi' callback is added in 'hisi_qm_hw_ops' to
configure hardware register. Call 'set_msi' to disable or enable MSI
during reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add test vector params for NIST P384, add test vector for
NIST P384 on vector of tests.

Vector param from:
https://datatracker.ietf.org/doc/html/rfc5903#section-3.1Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add ecdh_nist_p384_init_tfm and register and unregister P384 tfm.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

NIST P192 is not unregistered if failed to register NIST P256,
actually it need to unregister the algorithms already registered.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a comment that p192 will fail to register in FIPS mode.

Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs
and not setting fips_allowed.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If Kunpeng 920 enabled the sva mode, the "qm alg register" process will
return directly. So the list of VF wasn't added to QM list.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>