Add new model entry into configuration table.
Signed-off-by: Kenzo Gomez <kenzo.sgomez@gmail.com>
Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 67794f88.

We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f641
("ALSA: usb-audio: Explicitly set up the clock selector")

The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

If you connect an external headset/microphone to the 3.5mm jack on the
Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes
that and gives the user the ability to choose between internal and
headset mic.
Signed-off-by: David Senoner <seda18@rolmail.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.netSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clock selector control might be read-only. Add corresponding checks
to prevent sending control requests that would fail.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240125205457.28258-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

The quirk table entries should be put in the USB ID order, but some
entries have been put in random places.  Re-sort them.

Fixes: bf990c10 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue")
Fixes: fd28941c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
Fixes: dfd5fe19 ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless")
Fixes: 4a63e68a ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.")
Fixes: 7822baa8 ("ALSA: usb-audio: add quirk for RODE NT-USB+")
Fixes: 4fb7c24f ("ALSA: usb-audio: Add quirk for Fiero SC-01")
Fixes: 2307a0e1 ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)")
Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:

[    1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[    1.503912] usb 1-5: config 1 has no interface number 4
[    1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[    1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.519697] usb 1-5: Product: RØDE NT-USB+
[    1.519699] usb 1-5: Manufacturer: RØDE
[    1.519700] usb 1-5: SerialNumber: 1D773A1A
[    8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[    8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[    8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2

Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240124130239.358298-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240124120834.49410-1-lirongqing@baidu.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

fix typo in midi fallback log.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Fixes: ff49d1df ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Link: https://lore.kernel.org/r/20240124101827.35433-1-jacob@teenage.engineeringSigned-off-by: Takashi Iwai <tiwai@suse.de>

SSID 0x0c0d platform. It can't mute speaker when HP plugged.
This patch add quirk to fill speaker pin verbtable.
And disable speaker passthrough.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/38b82976a875451d833d514cee34ff6a@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since commit 086b957c ("ALSA: usb-audio: Skip the clock selector
inquiry for single connections") we are already skipping clock selector
inquiry if only one clock source is connected, but we are still sending
a set request. Lets skip that too.

This should fix errors when setting a sample rate on devices that don't
have any controls present within the clock selector. An example of such
device is the new revision of MOTU M Series (07fd:000b):

      AudioControl Interface Descriptor:
        bLength                 8
        bDescriptorType        36
        bDescriptorSubtype     11 (CLOCK_SELECTOR)
        bClockID                1
        bNrInPins               1
        baCSourceID(0)          2
        bmControls           0x00
        iClockSelector          0

Perhaps we also should check if clock selectors are readable and writeable
like we already do for clock sources, but this is out of scope of this
patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240123134635.54026-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

The device fails to initialize otherwise, giving the following error:
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Customer has reported an issue with specific desktop platform
where two CS42L42 codecs are connected to CS8409 HDA bridge.
If "Master Volume Control" is created then on Ubuntu OS UCM
left/right balance slider in UI audio settings has no effect.
This patch will fix this issue for a target paltform.

Fixes: 20e50772 ("ALSA: hda/cs8409: Add support for dolphin")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240122184710.5802-1-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Apollo Lake seems to also suffer from IRQ timing issues. After being up for ~4
minutes, a Pentium N4200 system ends up falling back to workqueue-based IRQ
handling:

[  208.019906] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated
for card #0. Suggest a bigger bdl_pos_adj.

Unfortunately, the Baytrail and Braswell workaround value of 32 samples isn't
enough to fix the issue here. Default to 64 samples.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-3-rsalvaterra@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We have self-explanatory constants for Intel HDA devices, let's use them instead
of magic numbers and code comments.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-2-rsalvaterra@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP ZBook Power using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240122074826.1020964-1-andy.chi@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>