- 23 Jul, 2015 1 commit
-
-
Octavian Purdila authored
Since patch "i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned" [1], 0 is not a valid i2c client irq anymore, so change all driver's checks accordingly. The same issue occurs when the device is instantiated via device tree with no IRQ, or from the i2c sysfs interface, even before the patch above. [1] http://lkml.kernel.org/g/<1430908148-201129-3-git-send-email-mika.westerberg@linux.intel.com> Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- 20 Jul, 2015 12 commits
-
-
Cristina Opriceana authored
This patch indends to make some cleanup and send printf error messages to stderr. The changes were performed with coccinelle for failure messages and manual for other cases, such as wrong usage messages. Signed-off-by:
Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by:
Hartmut Knaack <knaack.h@gmx.de> Signed-off-by:
-
Cristina Opriceana authored
Calculation of the length of an array can be done with the ARRAY_SIZE macro to make code more abstract and remove the associated checkpatch.pl warning. Signed-off-by:
-
Cristina Opriceana authored
Single statement blocks don’t need braces. Found with checkpatch.pl. Signed-off-by:
-
Cristina Opriceana authored
Remove explicit NULL comparison and write it in its simpler form as recommended by checkpatch.pl. Signed-off-by:
-
Adriana Reus authored
Add support for TXC PA12203001 als and proximity sensor. Support for raw illuminance and proximity readings. Signed-off-by:
Adriana Reus <adriana.reus@intel.com> Signed-off-by:
-
Andreas Dannenberg authored
TI's opt3001 light sensor is a simple and yet powerful little device. The device provides 99% IR rejection, automatic full-scale, very low power consumption and measurements from 0.01 to 83k lux. This patch adds support for that device using the IIO framework. See http://www.ti.com/product/opt3001 for more information. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Andreas Dannenberg <dannenberg@ti.com> Signed-off-by:
-
Harald Geyer authored
This cleans up the most ugly workaround in this driver. There are no functional changes yet in the decoding algorithm, but we improve the following things: * Get rid of spurious warning messages on systems with fast HRTIMER. * If the clock is not fast enough for decoding to work, we give up immediately. * In that case we return EAGAIN instead of EIO, so it's easier to discriminate causes of failure. Returning EAGAIN is somewhat controversial: It's technically correct as a faster clock might become available. OTOH once all clocks are enabled this is a permanent error. There is no ECLOCKTOOSLOW error code. Signed-off-by:
Harald Geyer <harald@ccbib.org> Signed-off-by:
-
Harald Geyer authored
We just do the assignments in two steps. Signed-off-by:
-
Harald Geyer authored
Explain why the driver needs a mutex. Signed-off-by:
-
Harald Geyer authored
* add spaces around binary operators in cases where it reduces readability * align multiline statements around opening parenthesis Reported-by:
-
Sanchayan Maity authored
The driver currently does not take into account the minimum sample time as per the Figure 6-8 Chapter 9.1.1 12-bit ADC electrical characteristics. We set a static amount of cycles instead of considering the sample time as a given value, which depends on hardware characteristics. Determine sampling frequencies by first reading the device tree property node and then calculating the required Long Sample Time Adder (LSTAdder) value, based on the ADC clock frequency and sample time value obtained from the device tree. This LSTAdder value is then used for calculating the sampling frequencies possible. In case the sample time property is not specified through the device tree, a safe default value of 1000ns is assumed. Signed-off-by:
Sanchayan Maity <maitysanchayan@gmail.com> Acked-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Andrea Galbusera authored
This adds support for Microchip's 13 bit 1 channel AD converter MCP3301 Signed-off-by:
Andrea Galbusera <gizero@gmail.com> Signed-off-by:
-
- 19 Jul, 2015 11 commits
-
-
Hartmut Knaack authored
Construct the scanmask using its descriptive axis names (as used in iio_chan_spec) instead of a 'magic' value. Signed-off-by:
-
Jandy Gou authored
Signed-off-by:
Jandy Gou <qingsong.gou@ck-telecom.com> Signed-off-by:
-
Jandy Gou authored
Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Hartmut Knaack authored
Some macros and a function were missing the acpi_als_ prefix, so add it. Signed-off-by:
-
Stefan Wahren authored
In order to provide a channel name to in kernel consumers add the datasheet names for every usable AD channel. Since the channel names differ between i.MX23 and i.MX28, we need to separate the channel specs. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Stefan Wahren authored
This patch reorder the header includes alphabetically. Signed-off-by:
-
Stefan Wahren authored
This patch removes the unnecessary header includes. Signed-off-by:
-
Stefan Wahren authored
This patch adds the missing include for mutex handling. Signed-off-by:
-
Stefan Wahren authored
This patch fix some spelling errors in the comments. Signed-off-by:
-
Stefan Wahren authored
At the beginning the driver supported only i.MX28 SoC, but now the whole MXS platform. So remove any confusing comments which apply only to i.MX28. Signed-off-by:
-
Cristina Opriceana authored
Remove sysfs bytes_per_datum device attribute ABI documentation since the attribute is not present anymore. Signed-off-by:
-
- 16 Jul, 2015 16 commits
-
-
Sudip Mukherjee authored
Remove the duplicate code of dgap_remove_one() and dgap_stop(). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
In a later patch we will remove the duplicate codes. But the code also needs to execute dgap_remove_driver_sysfiles() if it is being called from dgap_remove_one() but if being called fron the error path of the dgap_init_module() then the sysfiles should not be removed. Signed-off-by:
-
Sudip Mukherjee authored
Relocate the function dgap_stop() so that in a later patch we can remove the duplicate codes between dgap_stop() and dgap_remove_one(). Signed-off-by:
-
Sudip Mukherjee authored
The code in dgap_stop() is almost a duplicate of the code that will be executed on pci_unregister_driver(). So the error code was stopping and unregistering everything twice. Signed-off-by:
-
Sudip Mukherjee authored
The variable ret was always 0. So remove the variable and always return 0 from the function. Signed-off-by:
-
Sudip Mukherjee authored
Stop using DBG_88E which is a custom macro for printing debugging messages. Instead start using pr_debug and in the process define pr_fmt. Signed-off-by:
-
Sudip Mukherjee authored
The default value of status was _FAIL, it was only changed if kzalloc succeeds and the check for status is immediately following kzalloc. We can have the failure code in the else part as the failure code will be executed only if kzalloc fails. Signed-off-by:
-
Sudip Mukherjee authored
By checking for the success of kzalloc we were able to remove the goto label thus making the code more readable. Signed-off-by:
-
Sudip Mukherjee authored
The check for pstat and pdvobjpriv is not required here as we have already checked for them before. Signed-off-by:
-
Sudip Mukherjee authored
The inline function rtw_set_ips_deny() was only defined but was never used. Signed-off-by:
-
Sudip Mukherjee authored
Now since the Big-Endian and Little-Endian based calculations are moved into a macro we can make fb_read() and fb_write() common for both Little-Endian and Big-Endian. Signed-off-by:
-
Sudip Mukherjee authored
Define and use some new macros to work with different situations based on little-endian and big-endian. Signed-off-by:
-
Luca Ceresoli authored
rtw_hal_write_rfreg() is never referenced, so remove it. It used to be the only place where the write_rfreg callback was called, so get rid of the function pointer as well. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Cc: Greg Kroah-Hartman <gregkh@linux.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Luca Ceresoli authored
rtw_hal_set_def_var() is never referenced, so remove it. It used to be the only place where the SetHalDefVarHandler callback was called, so get rid of the function pointer as well. Also remove the callback itself, SetHalDefVar8188EUsb(), which was not called anywhere else. Signed-off-by:
-
Luca Ceresoli authored
rtw_hal_enable_interrupt() and rtw_hal_disable_interrupt() are never referenced, so remove them. They used to be the only place where the enable_interrupt() and disable_interrupt() callbacks were called, and the function pointer is never set, so get rid of the function pointer as well. Signed-off-by:
-
CHANG FU CHIAO authored
fixes "Possible unnecessary 'out of memory' message" Signed-off-by:
CHANG FU CHIAO <zector1030@gmail.com> Signed-off-by:
-
